Illustrator CS 2003 - auf Win 7 64 bit?

Hallo,
ich habe hier eine sehr alte Version von Illustrator CS ich glaube von 2003,
läuft diese denn auf einer 64 bit Version von Win7?
Danke!

Michael,
Not on 64 bit.
You will probably need to run the computer in XP mode to install it. Here is how:
Install and use Windows XP Mode in Windows 7
Once installed, I believe you can get it to run as follows:
1) RightClick the shortcut;
2) Click Properties;
3) Click Compatibility;
4) Tick Run this program in Compatibility mode for, then select XP in the dropdown list;
5) Start AI9.
Otherwise, search for Compatibility in the Windows Help and follow the instructions there.

Similar Messages

  • Illustrator 10 crashing in Win 7 64 bit

    Hey there!
    I have Illustrator 10 (edu version) and recently bought a Win 7 (64 bit) machine.
    Now Illustrator won't even startup, and I've been unable to find a solution anywhere.
    Please help.
    Thanks!
    ~M

    In article <[email protected]>, Rbarc wrote:
    > Any suggestions welcomed, next step is a support call but that involves
    > far too much work ;(
    When ever a Windows app (any Windows app) starts acting up, I run through
    the basics of clean out temp files and a defrag in addition to the shut
    off AV as you've done before worrying much about other causes.
    This basic cleanup helps often enough that it was worth me writing it up
    in more detail at http://www.konecnyad.ca/andyk/pcmaint.htm that may help
    as well.
    Andy Konecny
    Knowledge Partner (voluntary SysOp)
    Konecny Consulting Inc. in Toronto
    "Give more than others think is wise
    Challenge yourself beyond what others think is right"
    Michael 'Pinball' Clemens

  • Missing workspaces like Photoshop in Illustrator CS6 using a Win 7 64 bit PC

    I just finished a tutorial about type effects in Illustrator CS6 by Kelby training he suggested that we set the workspace to (Like Photoshop) but this selection is not there and other selections are missing.
    is there some kind of fix for this because I primarily use Photoshop and the interface would be helpful in finding my way around.

    Follow the directions of tt2 in https://discussions.apple.com/thread/5822086

  • Win 7 64 bit? PS 7, Illustrator 8

    Is There any way to use my older Adobe products on Win 7 64 bit?

    I don't know about illustrator 8, but i do know that photoshop 7 will work on a windows 7 x64 bit system without any compatibility modes.
    The only real catch is that you need less than 1 TB of free space on your hard drive for photoshop 7 to work.
    (photoshop 7 can't see hard drives with more than 1 TB of hard drive space and will show a scratch disk full message when you try to run it)

  • Apparent problem with Ovi Suite and Win 7 64 bit

    Hi
    Apologies if this has already been covered, but i have searched quite thoroughly and i haven't come across the specific problem i'm querying.
    I'm running Windows 7 64 bit, with PC Suite 7.1.51.0, which runs just fine.
    I intend to upgrade to the superb N8 when my contract comes to an end in 6 months, so i'm just doing my homework.  
    Apparently, the N8 will only run on Ovi Suite, NOT PC Suite.
    Now if anyone disputes this and can convince me that the N8 works perfectly fine with PC Suite, then read no further, please just respond!  (Bear in mind the OS i'm running though).
    As nice as Ovi Suite is, i've managed just fine so far with PC Suite.
    Otherwise, please let me explain the problem i am having:
    I installed Ovi Suite 2.2.1.23.  When i run it, it shows the main screen, and you can just make out a small window appearing in the middle saying "Nokia OVI".
    It is then that the program stops responding, eventually displaying the error message which reads:
    Runtime Error!
    Program: C:\...
    This appication has requested the Runtime to terminate in an unusual way.
    Please contact the appication's support team for more information.
    Judging by the similar stories of Ovi crashing (not finding one where the program fails to open, though), i think it is related to the fact that i'm running Win 7 64 bit; but i could be wrong.
    I have tried installing it in compatibility mode, then (failing that), running it in compatibility mode, all to no avail.
    Is this a problem that Nokia know about?  If there is an intended fix within 6 months, then that'll be fine.
    Otherwise, do any of you clever people know any work-arounds?
    Any further questions you need to ask, please don't hesitate.
    Many thanks
    Steve
    Nokia Enthusiast
    Solved!
    Go to Solution.

    Pinpointing the problem may be very difficult as Ovi-Suite appears to be extremely unpredictable.and getting Ovi-suit tu run an sync properly seems to be largely a matter of luck.
    I have just set-up three brand new identical HP workstations for our Geo-Information Department.
    All were set up from the same disk image with only Win 7 Pro Office 2010, then directly Ovi-Suite as our Geo-Information guys insisted on Nokia handsets against our advice.
    On one, machine Ovi-Suite crashed on launch and was unable to run at all.
    on the second, Sync to OL 2010 failed consistently.
    ont the third, everything ran fine with an N97 but an N8 was not recognized
    So i got curious and run tests on one machine: I installed the same disk image a total of six times (clean win7-64, clean Office 2010 3 times, Office 2003 three times)
    Office 2010
    the first time i had the crash on launch, second time OL2010 sync fail, third time it ran ok.
    Office 2003
    First time notes sync failed, second and third time all was ok.
    So the issue is definitely with Ovi-Suite and it appears to be pure luck whether is runs or not and if it runs at all, whether it syncs or not.
    Syncing OL 2010 seems to be much trouble prone than OL2003, 64bit appears to be much less stable than 32, onb win 7 it seems to have slightly fewer issues than on XP.
    We have NO issues with any other sync software (Palm, BB, Fruit, S-E, Microsoft, even Nokia PC-Suite).
    None of the software is run with admin privileges (as we just do not give admin rights to users). If software requires admin rights to be installed, it is done by Data Center employees.
    I'm afraid one's best bet to get Ovi-Suite running is trial and error, or if  the handset supports it, use PC-Suite, which is what we do.
    Ovi-suite users, according to our logs, generate over 70% of our smart phone related support calls, even though they are only 6% of our smart phone user base.
    As a result, we currently have all Nokia handsets that do not work with PC-Suite and require Ovi-Suite blacklisted in our organization, meaning we won't support them in any way. Installation of any flavor of Ovi-Suite is prohibited on user PCs as long as it does not become more stable, reliable and less of a resource hog.
    Ever seen a black lemon? They turn black when they rot. My N97 is black. 'nuff said

  • IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

    Dear all,
    we are just trying to install IDES 4.7:
    IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
    But the installation break with error Message:
    Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
    MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
    FJs-00012 Error when excuting script....
    Any experience or help from your side?
    Thanks in advance
    HanseAtik

    Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
    adn execute "R3trans -d"  Tell what result .
    About documentation read -->
    service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
    in left corner chek your release like :
    "SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
    After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
    Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle 
    Regards.
    Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

  • MultiMasterFonts in Win XP 64 bit installieren

    Moin! Ich arbeite seit 15 Jahren mit ATM. Jetzt hat mich der Teufel geritten und zu einem Umstieg von Win XP 32 bit auf 64 bit verleitet. Die Folge: ATM 4.1 kann nicht installiert werden, ABER der ATM lite auch nicht ... Was mache ich falsch, was kann ich machen (außer zurück zum alten System)???
    Alderman

    Hi,
    die Hoffnung auf Weiterentwicklung ist wohl vergebens, was ich auch sehr bedaure. Ich ziehe den ATM zur Schriftverwaltung ebenfalls allem anderen vor. In Deinem Fall geht das wohl nicht mehr; dann musst Du eben auf Suitcase von Extensis oder vergleichbarem zurückgreifem. Vor dem Linotype Fontexplorer kann ich nur warnen. Ob Suitcase MM-Fonts verwaltet habe ich vergessen; falls nein bleibt Dir nur der Rückschritt auf 32-bit, was meiner Meinung nach aber nicht das verkehrteste wäre. Oder nutzt Du wirklich mehr als 4 GB?

  • How to install 64 bit Lightroom 2 on Win XP 64 bit

    I read that the default for WinXP is 32 bit, and I really want to install the 64bit version on Win XP 64 bit (not Vista).
    Is it possible to do this? If not then I am definitely not buying it.
    If yes, any instructions on how to force the install of the Trial version to install 64 bit.
    If not, I hope PShop CS4 is made available in 64bit for Win XP 64bit.
    Thanks,
    Dan

    Thanks very much!
    Just what I was looking for.
    I will try this out with the Trial version right away.
    Dan

  • Can I install win 8 64 bit OS on dv6936 laptop win vista 64 bit OS

    I just purchased the HP Pavilliom 500 destop and would like to upgrade my laptop with desktop OS.
    Can I install my hp Pavilion 500 PC win 8 64 bit OS on my hp pavillion dv6936 laptop win vista 64 bit OS

    Hi Ibdman,
    You cannot use the Pavilion 500 desktop recovery disks to upgrade the operating system on your HP laptop.
    You would have to purchase either: a Win 8 retail upgrade or full install disc to change the operating system on your laptop.
    If you are considering upgrading your laptop you should consider Win 7 64 bit instead of Win 8.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    HP Products:
    810-150se Desktop
    17t-j000 Notebook
    1380t Desktop
    560z Desktop
    Errare humanum est.

  • Why Win 7 64-bit pc says device added will sync momentarily, but no data has come from either my Win XPpro 32-bit pc nor either Android device (3 synced)?

    All 3 existing/currently-used devices (Win XP pro 32-bit laptop, and 2 Android phones) are on Firefox 30 (latest version) and sync just fine; NEW laptop (a Win 7 64-bit laptop, HP pro650) says added, "Will Sync Momentarily" but no data transferred... Not a single bookmark, nor my theme or other configuration(s).
    I realize, after finding hardware requirement, that 64-bit Win 7 allows Firefox to work fine and am using it right now (I downloaded v.30 Firefox as soon as I booted the brand new pc up today), it let me set up sync & everything, just never transferred any data...Almost impossibly time-consuming task to transfer the thousands of bookmarks & complete organization from my other laptop, and will not matter much if I cannot sync any new ones with it. I would hate to have to transfer everything into Chrome...
    Am I out of luck with this 64-bit unit to sync at all until Firefox supports it in the future?
    Same night...Later that evening:
    Well...Update Here: Tried Waterfox and it worked perfectly, got everything in from XP pro pc. SuperFast browsing too.
    Granted it is apparently a v.28, I think. Doesn't really matter to me. Now I'm going to try to import both Android bookmarks, etc. Will post my success or failure later.

    Hi D.Dao,
    In order to further investigate the issue on Firefox 30, could you please turn on logging:
    # Open about:config and turn on: services.sync.log.appender.file.logOnSuccess and services.sync.log.logger.engine.bookmarks
    # Restart Firefox and look at: about:sync-log
    # Logs and error messages will be located here
    Links for log text support see [http://pastebin.mozilla.org/] See how to turn on logs or [https://quality.mozilla.org/helpful-tips-for-qa-of-sync/ Helpful Tips for QA of Sync]
    Thank you!

  • Flash Player 10 Not installing on Win 7 64 bit PC

    Flash Player 10 download goes through install procedure and says it is installed but it is not.
    After that There is always  a Flash Player Install file on the PC.
    When I click on that it goes through the install procedure and says it is installed but it is not.
    Have tried above install more than 6 different times. Also on my wife's new PC.
    Always the same bad result.
    These two new PC's are both on WIN 7 64 bit OS.

    I tried the suggested method of uninstall and then install.  Also the disable instructions for Norton AV.
    Still no success.  When I again check the list of programs in Control Panel for possible uninstall the Flash Player 10 has returned there.
    But the player does not play when needed for some videos on Facebook, etc.
    One thing I could not find to disable on Norton AV was "Smart Firewall."  It was not in my NAV 2011.
    Any other suggestions appreciated.
    Frank Mitch
    Date: Thu, 24 Feb 2011 11:51:01 -0700
    From: [email protected]
    To: [email protected]
    Subject: Flash Player 10 Not installing on Win 7 64 bit PC
    Hi, I would try this method and see if it works better. There is a link for FF(Firefox) If you don't use FF, ignore that. Also before you begin this procedure, I need to know what Anti-Virus/Spyware programs you have Installed. Some will block the Install of Flash Player and that needs to be taken care of first.
    Download and SAVE to your Desktop the Uninstaller:
    http://kb2.adobe.com/cps/141/tn_14157.html
    Download and SAVE to your Desktop the Installer for IE- use the EXE Installer
    http://www.adobe.com/products/flashplayer/fp_distribution3.html
    Download and SAVE to your Desktop the Installer for FF- use the EXE Installer for plugin based (from the same site)
    Close all browser windows, you only want to be looking at your Desktop.
    Disable any messenger services, as yahoo, msn, etc in the system tray(area near the clock)
    Be sure to use the Administrator Account.
    Run the Uninstaller and when finished, Reboot(restart) your computer.
    Run the Installer for IE, Run the Installer for FF(If needed/used) and when finished, Reboot.
    Then go to this test site and test each browser:
    http://www.adobe.com/software/flash/about/
    You may want to print these instructions to make it easier to follow. If you have any questions, let me know.
    Thanks,
    eidnolb
    >

  • Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

    Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
    All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
    I already tried the following scenarios:
    1-  Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
    2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
    Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
    Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
    3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
    Link to script:
    http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
    Here is a link to the content of my WindowUpdate.log file:
    https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
    Thank you in advance for helping.

    All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
    Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
    Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
    Might I suggest the following:
    Download the IE8 for Windows Server 2003 installer to a thumb drive.
    Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
    Reinstall Windows Server 2003 with Service Pack 2.
    Upgrade to IE8 from the thumb drive installer and apply the
    Cumulative Security Update.
    Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
    years of updates are going to take a Very Long Time to scan for, download, and install).
    Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • BIP Deskotop 11.1.1.6 (32-bit) with Office 2010 (32-bit) on Win 7 64-bit

    BIP Deskotop 11.1.1.6 (32-bit)
    Office 2010 (32-bit)
    Win 7 (64-bit)
    The current certification matrix seems to say this is supported, however I am having the following problem:
    1. I have an existing RTF template, with data template that works. I have run it to be sure, and can view output and verify.
    2. If Iopen that RTF template in BIP Desktop, then remove a field, and then using the field browser ( or insert > field ) add that same field back, or a new one the report will not generate output.
    Upload the RTF, and the process will finish with status warning, and it fails during post processing. I look at the Output Post Processor error. edit the RTF template with a text editor and see that instead of putting in a <?YOUR_FIELDNAME?> BIP Desktop has instead inserting something similar to the following: <?ref:xdo0001?>. The only solution I currently have is to manually change these tags, however for large BIP reports this is cumbersome, and unacceptable for a long term solution.
    Is there a workaround? or reported bug? I couldn't find anything on MOS for this.
    Here's the OPP log, you can see the error points to the "REF" element that was added by BIP:Desktop.
    [5/29/12 1:26:38 PM] [8629358:RT6176186] Executing post-processing actions for request 6176186.
    [5/29/12 1:26:38 PM] [8629358:RT6176186] Starting XML Publisher post-processing action.
    [5/29/12 1:26:38 PM] [8629358:RT6176186]
    Template code: XX123XML
    Template app: MUTL
    Language: en
    Territory: US
    Output type: RTF
    [5/29/12 1:26:39 PM] [8629358:RT6176186] Output file was found but is zero sized - Deleted
    [5/29/12 1:26:39 PM] [UNEXPECTED] [8629358:RT6176186] java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:611)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:239)
         at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
         at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
         at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
    Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'ref' used but not declared.
         at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
         at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
         ... 17 more

    Solution was to follow: Report Generation Fails Due to oracle.xdo.parser.v2.XPathException: Namespace prefix 'ref' used but not declared [ID 1337111.1]

  • Weblogic 10.3.0 on Win 2k3 64 bit

    Hi All
    I have installed Weblogic 10.3.0 on Win 2K3 64 bit and created a domain with using Sun JDK 1.6.0_10.
    The server crashes when I enter the username on the prompt while starting the server. But if I hard-code the userID/pwd in the SetDomainEnv.cmd file, the server works fine.
    The error that I am getting in the first case is:
    Enter username to boot WebLogic server:weblogic
    <Oct 6, 2010 2:53:38 PM CDT> <*Error*> <Security> <BEA-090782> <Server is Running in Production Mode and Native Library(terminalio) to read the password securely from commandline is not found.>
    <Oct 6, 2010 2:53:38 PM CDT> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
    <Oct 6, 2010 2:53:38 PM CDT> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
    <Oct 6, 2010 2:53:38 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Please let me know if anyone of you have the resolution to this problem.
    Thanks

    You might try to rename (.old) the admin server cache files and try again. They are located at xxxdomain\servers\admin (4 folders - cache, data, tmp, security).....

  • I am using ITUNES 11 on Win 7 64 bit.  I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working".  How do I trouble shoot or fix this? Thanks

    I am using ITUNES 11 on Win 7 64 bit.  I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working".  How do I trouble shoot or fix this? Thanks

    Try gn_id's suggestion from the following post:
    Re: iTunes 11 crashes when opening the store - no error message

Maybe you are looking for