Illustrator CS 5.5 hangs or file corrupted whenever arabian language is used

Hi all,
I'm having a problem that whenever I used arabian language which I have bought from a company named Scribedoor, the illsutrator will hang on me. Sometimes, after I had saved the file it will be corrupted.
Pls help advise whether it is compatibility issue here. I've having stuck here as Scibedoor technical support does not support my region.
Many thanks.
Josh.

Dear Jacob,
You asks a very good perspective question.
To change a certain type of arabic font, the changes by far can only be made depends very much on the type of english fonts that user choose to use.
For example, If you type Times New Romans in english, Scribedoor will appear TImes New Romans style but in arabic translated text. If you use Tahoma, the Scribedoor simply changes the english words to arabic translated text in Tahoma style.
So but the real problem occurs when I try to zoom in to see the file at a closer look then it hangs. Other times in other illustrator file which also used the same english-converted-to-arabic style, when I try to open it says, "File cannot be open as it is corrupted."
I have done the convention troubleshooting by uninstall both the scribedoor and illustrator and install again but the issue persist.
Josh.

Similar Messages

Illustrator fails with Mavericks OS - catastrophic file corruption starting with corrupt type

Since installing Mavericks OS, my Illustrator files have corrupt type ("Cannot Edit the Type" — and repeated efforts crash entire app) and now one mission-critical file crashed and can no longer be opened(!!!) Lost a week's worth of work since all of my "saves" this week were encapsulated in this now corrupt file. Error message says "cannot open file" if opened from outside the app. Crashes Illustrator if opened from inside the app. Can Adobe staff do anything to help me recover this file? Unbelievably bad experience for the last three weeks since upgrading to Mavericks. Countless show-stoppers.
My only hope, besides a magical Adobe intervention, is DropBox's packrat versioning feature. Yet I have no assurance that this won't happen again, or faith in the stablity of Illustrator.

Ping statistics for 216.58.210.14:
Packets: Sent = 3083, Received = 3034, Lost = 49 (1% loss),
Approximate round trip times in milli-seconds:
Minimum = 8ms, Maximum = 1031ms, Average = 18ms
This is from a ping which was left during the 15 mins it took me to write the above message.

Is there a cure for persistent file corruptions across the suite?

i am having terrible and consistent problems with file corruptions across the suite. for example…
1: i collected for output (indesign) – corrupted over 100 small images that were linked.
2: opened an indesign job and all linked files failed to update and could not be imported (simply would not import those files and were all corrupted).
3: had a hang in photoshop followed by a 150:30 error (would not open any of my applications). this prompted a clean install of system and adobe cs4 see below
4: most recently, had a hang in photoshop (photoshop will also no "force quit") whilst indesign was open. two of my image files corrupted and, most surprisingly, all my illustrator files that i had placed also corrupted (will not even open in illustrator any more). illustrator was not even running at the time, so, get this – a hang in photoshop destroys illustrator files simply because they are placed in indesign.
this last event has made me more certain than ever that there is a fundamental problem at the cs4 core.
can anyone help?
please note the following:
i am running a macintosh imac, 2.66 GHz Intel Core 2 Duo (latest imac), with 4 GB 1067 MHz DDR3 ram.
before this last disaster, i had reloaded the system software (archive and install), and updated it all the way to version 10.5.8
i then uninstalled the creative suite, ran the cleanscript from adobe, reloaded the creative suite, downloaded all the cs4 updates
(so, latest mac, latest system, latest cs4 – all clean installs).
is there something i can do? or is this just a very unstable and disappointing upgrade – i have had nothing but problems from day one!
many thanks if anyone has any advice.

Re: 150:30 error:
Please try this KB article's solutions, and report back on how it went for you. If you can provide details about any recent OS updates, backups, or migrations, that would help is nail down the root cause of the new rash of this error for Mac users recently:
http://kb2.adobe.com/cps/512/cpsid_51260.html

Illustrator CC 2014 slow opening networked files on some PC's

Have 6 PC's running CC 2014. 5 Win 7 Pro 64, one Home 32. Two weeks ago two of the pro 64 PC's are pausing for 20 seconds opening or saving illustrator files of any size on the network (Server 2008 R2). No issues with any other programs or any of the other PC's. Opening the same file saved on the local HDD is fine. This started I believe after some MS updates about two weeks ago.
Watching the network packets/sec graph selecting the file to open on the network there will be almost no data transfer for 15 seconds then it shoots up and opens even a 15mb file in 1 second. All PC's received the MS updates and I cant figure out why its happening on only two machines. Happens whether opening in explorer on the mapped drive, opening from the file-open menu or opening by browsing the network instead of through the mapped drive.
Everything else is fine, even copying the file takes half a second, its just opening over the network on these two machines.

Porkkana,
Concerning files from network, it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html
Concerning the other issues, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

File corruption with a very large .ai file

A little background first:
I am a graphic designer/cartographer with 15+ years of experience. I started making maps in Illustrator with version 6 and have upgraded to every version since.
My machines:
2x Mac Pro 8-core 3.0GHz, 16GB RAM, 10.5.7
Mac Pro quad-core 2.66GHz, 8GB RAM, 10.5.7
MacBook Pro 2.0GHz, 2GB RAM, 10.5.7
Illustrator specs:
All machines have CS4 installed as well as Illustrator 10.
The 8-core MPs have the MAPublisher Plug-ins installed
The 4-core and MacBook Pro (MBP) does not have the MAPublisher Plug-ins
The problem I am having can be replicated on each of the machines. The MBP can't handle the file due to RAM. Since this occurs on machines that has MAPublisher installed and a machine that does not, I think we can rule out a plug-in issue.
File specs:
The original file: version 10, file size (uncompressed, no PDF support, and no font-embedding) is 36.4 MB. There are no raster effects or embedded/placed images. This is strictly a vector file. Artboard Dimensions: 85.288 in x 81.042 in
The original file, converted with CS4, and then saved as a CS4 file: file size (uncompressed, no PDF support, and no font-embedding) is 97.9 MB.
Brief Description of the problem:
I have tried to convert this file into every version of CS and it has failed every time. With each version, it has resulted in an unusable file for different reasons. CS-CS3, the file was completely unusable because of the opening/saving time. It could take as long as 3 hours to save the file. With CS4, this has been rectified and I once again tried to convert it. Upon re-opening of the 'converted' CS4 native file, the file is 'corrupted'.
The file corruption is not your regular "This file can't be opened because of: X" corruption. The file opens after a save/close just fine. It is just that parts of the file gets destroyed. To save space in this post, I have created a webpage that illustrates the problem that I am having:
http://newatlas.com/ai_problem/
I have tried everything possible to make the file smaller and it is as slimmed down as I can make it. (Using symbols, styles, etc.) I have also tried to eliminate this as a font problem by replacing every font with an Adobe supplied font, cleared caches, etc. This does not work, so I think we can rule out a font issue. I have also reduced this file to contain no pattern fills, no gradients, and just used simple fills and strokes. All to no avail. I have also tried piecing the file back together into a new document by copying/pasting a layer at a time. Saving, closing and re-opening after each paste cycle. I can get about 95% of it put back together and then it will manifest the problem. The only thing I haven't done is to convert all of the type to outlines. This would not solve my problem since this is a map that I continually work on year after year. I also can't remove objects or cut the overall area of the map because this file is used to produce an atlas book, a wall map and custom boundary wall maps. You can view the entire file at:
http://okc.cocpub.com
If I do not convert the legacy text, the file saves/closes/re-opens just fine. It just takes a very long time. So this leads me to think that the cause of the problem is the number of editable type objects that this file has. Ever since Adobe changed the Type Engine, I haven't been able to use this file in current versions of Illustrator.
If I could get this file to open, uncorrupted, I could finally get rid of Illustrator 10. Illustrator 10 does not have any problem with this file (and is still faster than CS4 in everything except selecting a lot of objects.)
I am posting this on the forums for any other opinions/ideas from the 'Illustrator Gurus' as a first step. I want to get in contact with someone at Adobe to see if we can address this problem and possibly get it fixed with CS5. I know that this is a user-to-user forum, but I'm not sure who, where and how to contact Adobe for this issue. Maybe someone on these forums can help with that as well.
Thank you for your patience for getting this far in my long post and I would really appreciate any response.
Dave

Thanks Wade for responding,
Did you try trashing your Adobe Illustrator CS4 Settings folder in your User's Preferences?
Yes, I've tried deleting prefs. Basically I've tried to rule out any problems with Illustrator as a whole. This issue has also occured on a clean install of OS X and Illustrator on a new User Account with the opening of this file being the first task that Illustrator has. There is no problem with Illustrator per se, but I think it is more of a limitation in Illustrator based on the number of type objects.
You could also try saving it out of 10 as a pdf or as postscript and distilling it then open that in ai or place it id a blank AI document.
Did you try to place instead of opening it?
I haven't tried any of these since the resulting file would be utterly unusable. Basically this would create a 'flat' file with 'broken' strings of text (type on a path especially) and type being uneditable. (Now that I think about it, CS4 does a much better job of opening pdfs without breaking type.) I still think this approach is not really a prudent course of action since, as of now, I can continue to maintain this map in Illy 10.
In my experimentation, the results are as follows:
1. Opening the file without updating the legacy type, saving the file as a new document, closing and then re-opening results in a file you would expect. Every object is where it is supposed to be. Downfall of this method: I absolutely need the type to be editable, especially the 'Street Type' since this type is actually used to create map indexes.
2. Opening the file with updating the legacy type, saving the file as a new document, closing and then re-opening results in a file that exhibits the exact behavior that has been posted in the thread-starter. This method results in the 'Bruce Gray' type being the duplicated item.
3. Opening the file without updating the legacy type, then splitting the file into layer groups and saving as separate files. Then opening the resulting CS4 files, updating the legacy type, copy & pasting (with layer structure) into a new document results in a usable file up to a point. I can get about 95% of it put back together and then the problem manifests. I have thought that it might be a "bad" object on one of the layers but I have ruled that out by: a.) All of the resulting sub-files (files that are portions of the larger) exhibit no problems at all. Usually our PS printers find issues that Illy does not and there is no problem in RIPing the sub-files. b.) If I change the paste order, meaning copying & pasting from the top-most layers to the bottom-most layers, vice-versa, and a completely random paste order, different objects (other than the 'Bruce Gray' type) will be duplicated. I've had one of my park screens, a zip code type object and a school district boundary be the duplicated object.
All of these experiments has lead me to believe that the Illustrator Type Engine is the main facilitor. I just don't think it can handle that many individual point type objects. I know CS4 can handle the number of objects, based on the fact that a legacy type (non-updated) file works.
I am almost entirely sure that Illustrator is working exactly as it is supposed to and that the vast majority of Illy users will never run into this issue. This file is by far the largest file that I work on. I would just like to be able to use an Intel native version of CS to continue maintaining this map.
On a side note: About three years ago, I tried working with this file in Freehand MX. Freehand initially would open the Illy file without a problem. I could work on it but when I would save it as a Freehand file, close it and re-open it, I would get your standard File Corruption. It would partially open, give me a corruption dialog, and open the file as a blank document. I alwa ys knew there was a reason to use Illustrator over Freehand for making maps.

Nokia E-51 giving file corrupt error.

PLEASE HELP ME!!!
I am having a Nokia E-51 and the firmware is 220.34.37 / 20-10-2008 / RM-244 / Nokia E51(16).
Yesterday my phone got hanged and was not booting after removing batteries for an hour.
I read forums and decided to perform Hard Format.
I was sucessful.
THEN I restored Phone Backup from Memory Card which did not succeded 100% nearly 60-70% phone was restored.
I then tried to install all the remaining software from my own, but when ever I try to install softwares including gmail, google maps etc. is it stoping by an error "File Corrupt".
Please help me what has to be done.
Please reply and oblige.
Jagdish

Hi,
The intention of these boards are for individual users such as yourself to share their opinions and assist each other. These forums are mainly for user-to-user support.
The moderators are only here to moderate and we will not be able to provide any assistance.
If you would like to receive assistance from Nokia, you can use the "Contact Us" link at the top of the page and then, select your country in the section "Call or Email Nokia Care".
Yes, there are Nokia employees who participate in this community. However, they participate voluntarily and they are not obligated to respond to any posts or to look into any specific issues that are discussed here. For more information about the Nokia employee's role, read this post:
http://discussions.nokia-asia.com/discussions/board/message?board.id=news&thread.id=846
Regards,
Concordia
~*~ New to Nokia Support Discussions? ~*~
You may want to have a look at the guidelines!

Files corrupt when saved as Jpeg.

Recently I have been creating invitations in illustrator but when I save them as a JPEG file it says file corrupted when I try to upload them for printing. How can I fix this without creating an entirely new invitation?

Why are you saving as jpeg for print out of Illustrator? Work in CMYK and save as pdf.
Working in CMYK means that, provided your monitor is calibrated correctly, what you see is what you get.
You may be in for an unpleasant surprise if you work in those nice, bright RGB colours and they come out all dull and muddy when printed.
Pdf means that vector art remains as vector art. It is bad Latin to pixellate things when you don’t need to.

Illustrations greyed-out when printing PDF file from Adobe Reader

Hello,
From within PageMaker 7 I've made a 52-page PDF document in Distiller (selected job option is for Print) and uploaded it to my website. It contains many greyscale illustrations (TIFs and JPGs first imported into PageMaker), and text. I am able to view the PDF file over the net, and can print the illustrations and text on each page with no problem. I am using an old HP laser printer (LaserJet 5L). Other users are able to view the same PDF document on the net, and they can see all the illustrations and text on every page. However, some users who have tested it are reporting that when they try to print out the pages on their own printers, most of the illustrations are greyed-out between pages 3 and 51. The text is printing correctly on their printers. The images on the front and back cover are printing, and so is an 11-page comic strip (made up entirely of 11 TIFs, with no additional text). Can anyone work out why all the other illustrations throughout the document are printing greyed-out on their printers?
Thanks
Roger3

I am replying to my own question.
After posting here, I received feedback from a viewer that the PDF file is downloading and printing out pages with no greying-out of the illustrations. It looks to me as though the problems are arising from other viewers' slow internet connections and/or hardware RAM for printing, especially if trying to print all pages at once, rather than Saving As to hard drive, then printing.
Thanks,
Roger3

Missing files - corrupt library after upgrade to 11.1.4

I updated iTunes to 11.1.4, and after launching, it looked like it was updating my library as it's done in the past. However, this time, after an hour I realized it had not yet completed, and a dialogue box asking about creating an iTunes U playlist was on the screen. I tried to do so, but it just kept repeating. So finally I stopped it, and now I have an file marked iTunes library (damaged) and an incomplete library. I am missing thousands of songs compared to the last .itl I have in Previous iTunes Libraries.
I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
Thanks in advance.

I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
No, you need to do the backup as part of regular computer maintenance and before you do any software upgrades. iTunes moves the old library into the previous library area but perhaps your update failed before it did that.
How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
Yes, there's one on the Dougscripts web site that will crawl through a library. In yur case it's probably just as easy to drag the whole iTunes media folder to Automatically Add to iTunes. Anything already in the library it will ignore. Anything not there it will add.

Downlaoded .exe for Firefox5 gives "file corrupted" error when I try to open it

I am running Windows XP on Parallels 5 on top of MAC OSX on an iMac24.
I have no problems downloading Firefox 5 on OSX for Mac, nor for downloading Thunderbird on WinXP/Parallels5.
Just Firefox5.exe comes up "file corrupted" when I try to run it or open it on WinXP/Parallels5.

Post in Microsoft's Powerpoint (Mac) message boards.

Sync File Corruption with 64-bit Vista/iTunes

I'm getting some file corruption problems when trying to sync my new 16GB iPhone with the latest 64-bit iTunes (7.6.0.29). "yes I have the 64-bit version".
The sync seems to go correctly, but I have yet to be able to play any videos all the way through. Videos purchased from iTunes as well as self encoded files. All said files were working on my 60GB iPod Video with previous versions of iTunes on the same 64-bit Vista machine.
The videos will start playing fine, but will eventually reach a point in the file that was corrupted during transfer, the audio will drop out and the video will distort, then it exits from the video as if it reached the end of the file. No error messages or anything. If I play the file again, it will do the same thing at the exact same spot, so its a problem in the file. Now, if I remove the file and add it back, the file still has the same problem, but in a different location, which means the source is fine, but the copy to the device during the sync is the issue.
To test, I synced the exact same content from my notebook which is 32-bit XP, and zero problems. So I'm currently just using my notebook for syncing at the moment.
Anyone else with 64-bit Vista have a similar issue?

Hello
I have a couple troubleshooting steps I would like you to try. I myself do not have a 64 bit Vista so I can not test this to confirm if the same issue occurs or not.
1. Attempt to Sync content using each of the USB Ports. See if all USB Ports pose the same issue with the video. Or if you found when where it does not occur.
2. Test on a new user on the Vista Machine. If possible take at least one or 2 movies and copy them onto a flash drive or something. And bring them into iTunes on a new user account. You may need to Authorize that user and De-authorize when your done. Does the same issue occur?
3. If you perform a reboot on the iPhone, Then Sync Data over. Does the same issue occur?
4. If possible could you restore the iPhone. Then Re-sync and see if same issue occurs.
5. Is this happening with all videos? or only certain ones? Does the corruption occur at the same time frame every time? If so is it the same time frame for all videos or slightly different?
6. Perform an Uninstall and Reinstall of iTunes on your system, See if same issue occurs.
Let us know how it goes.

Transaction log shipping restore with standby failed: log file corrupted

Restore transaction log failed and I get this error: for only 04 no of database in same SQL server, renaming are working fine.
Date
9/10/2014 6:09:27 AM
Log
Job History (LSRestore_DATA_TPSSYS)
Step ID
1
Server
DATADR
Job Name
LSRestore_DATA_TPSSYS
Step Name
Log shipping restore log job step.
Duration
00:00:03
Sql Severity        0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted
0
Message
2014-09-10 06:09:30.37 *** Error: Could not apply log backup file '\\10.227.32.27\LsSecondery\TPSSYS\TPSSYS_20140910003724.trn' to secondary database 'TPSSYS'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: An error occurred while processing the log for database 'TPSSYS'.
If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
An error occurred during recovery, preventing the database 'TPSSYS' (13:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
RESTORE LOG is terminating abnormally.
Processed 0 pages for database 'TPSSYS', file 'TPSSYS' on file 1.
Processed 1 pages for database 'TPSSYS', file 'TPSSYS_log' on file 1.(.Net SqlClient Data Provider) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 Skipping log backup file '\\10.227.32.27\LsSecondery\TPSSYS\TPSSYS_20140910003724.trn' for secondary database 'TPSSYS' because the file could not be verified.
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: An error occurred restoring the database access mode.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteScalar requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: An error occurred restoring the database access mode.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteScalar requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 Deleting old log backup files. Primary Database: 'TPSSYS'
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 The restore operation completed with errors. Secondary ID: 'dd25135a-24dd-4642-83d2-424f29e9e04c'
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not cleanup history.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.38 ----- END OF TRANSACTION LOG RESTORE
Exit Status: 1 (Error)

I Have restore the database to new server and check with new log shipping but its give this same error again, If it is network issue i believe issue need to occur on every database in that server with log shipping configuration
error :
Message
2014-09-12 10:50:03.18   *** Error: Could not apply log backup file 'E:\LsSecondery\EAPDAT\EAPDAT_20140912051511.trn' to secondary database 'EAPDAT'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-12 10:50:03.18   *** Error: An error occurred while processing the log for database 'EAPDAT'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
An error occurred during recovery, preventing the database 'EAPDAT' (8:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
RESTORE LOG is terminating abnormally.
can this happened due to data base or log file corruption, if so how can i check on that to verify the issue
Its not necessary if the issue is with network it would happen every day IMO it basically happens when load on network is high and you transfer log file which is big in size.
As per message database engine was not able to restore log backup and said that you must rebuild log because it did not find out log to be consistent. From here it seems log corruption.
Is it the same log file you restored ? if that is the case since log file was corrupt it would ofcourse give error on wehatever server you restore.
Can you try creating logshipping on new server by taking fresh full and log backup and see if you get issue there as well. I would also say you to raise case with Microsoft and let them tell what is root cause to this problem
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

"FILE CORRUPTED" error message on N 78

My phone is a Nokia N78 and my problem is as followed:
Before updating the firmware from version 12 to version 20, I had google maps installed. After updating over the air, google maps (and also several other apps) got removed. When i tried to download and install google maps again and tried to install it again, it keeps saying "file corrupted". The same goes with other apps i try to download and install. But I have no trouble installing java apps.
I am wondering if anyone knows how to solve this problem?
Solved!
Go to Solution.

you are very welcome i am so glad that you got your issues sorted. i know how frustrating it can be to have a phone and potentially no 'way out'. been there and done that, that is why i joined this forum i wanted to learn more and find more answers to some questions. technology in general can be frustrating and its ever changing so we have to keep up or we will drown in frustration be well, rad.
ps. and you are correct, i am no expert, my solution is not expert either more of a been down this road solution. i am just another user on this forum that sometimes gets the right answer
Message Edited by radical24 on 19-Jan-2009 07:54 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

File corruption on SDCard when multiple files are being written from WinCE 6.0R3

We currently have file corruption problems which we have been able to reproduce on our system which uses WinCE 6.0R3. We have an SDCard in our system which is mounted as the root FS. When multiple files are being written to the file system we occasionally
see file corruption with data destined from one file, ending up in another file, or in another location in the same file. We have already written test SW that we have been able to use to reproduce the problem, and have worked with the SDCard vendor to
check that the memory controller on the card is not the source of the problems.
We know that the data we send to WriteFile() is correct, and that the data which eventually gets sent through the SDCard driver to the SD card is already corrupted.
We believe that the problem is somewhere in the microsoft private sources between the high level filesystem API calls and the low level device calls that get the data onto the HW.
We have confirmed that the cards that get corrupted are all good and this is not a case ofpoor quality flash memory in the cards. The same cards that fail under WinCE 6.0R3 never fail under the same types of testing on Windows, Mac OX, or linux. We
can hammer the cards with single files writes over and over, but as soon as multiple threads are writing multiple files it is only a matter of time before a corruption occurs.
One of the big problems is that we are using the sqlcompact DB for storing some data and this DB uses a cache which get's flushed on it's own schedule. Often the DB gets corrupted because other files are being written when the DB decides to flush.
So we can reproduce the error (with enough time), and we know that data into the windows CE stack of code is good, but it comes out to the SDcard driver corrupted. We have tried to minimize writes to the file system, but so far we have not found a
way to make sure only one file can be written at once. Is there a setting or an API call that we can make to force the OS into only allowing one file write at a time, or a way of seeing how the multiple files are managed in the private sources?
Thanks
Peter

All QFE's have been applied we are building the image so we have some control.
I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones. The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard. If the system used the same cluster to write the 2 files then that would explain the issue.

H8-1520t: sfc /scannow reported file corruption in Windows 8.1

My computer (h8-1520t) computer had had file corruption error reported by sfc /scannow.
The corruption was rather common corruption as discovered elsewhere on the internet. The corruption pertained to prncacla.inf and it was repaired only by using DISM.exe /Online /Cleanup-image /Restorehealth. The corruption occured while the computer was doing automatic maintenance which locked up my system. After forcing a shutdown and rebooting, I immediately ran sfc /scannow and that's when the corruption was first detected.
Now sfc /scannow finds no corruption and automatic maintence runs to completion.
Since this is a rather common corruption error and there's no explanation as to what causes the problem, should I send my computer, which it's still under warranty, back to HP ---or--- did I corrected the corruption properly ? ? ?
On additional question: What on earth causes that common corruption to occur anyway.
Also: UEFI diagnostics extensively run and the extensive testing revealed no problems with system board, hard drive, memory, processor (i7-3770), graphics card memory (Radeon HD 8570).
If I should be concerned about my computer being a dud and lemon, I'd like to know... Or, did I fix the corruption correctly?
Thanks,
Mark

Hi Mark,
You may want to review this article.
If you are not comfortable with the Windows repair process then you can use the external HP recovery media to reload you PC back to a day one factory fresh condition. Backup your data before doing so.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Illustrator CS 5.5 hangs or file corrupted whenever arabian language is used

Similar Messages

Maybe you are looking for