Illustrator cs2 creates pdf with anomalies

I have Illustrator cs2 (12.0.1) and I create pdfs with it and send these to my clients for proofing. When I view the pdf in acrobat standard 6 it looks fine. When my sales people and clients view it in reader 8 they get a color break down that is incorrect. For example they see a color that should not be there (in the pdf below it is the blue cyan in the logo). So I need to figure out how to fix this problem. Also it does not happen on every pdf.
here is a link to a pdf
www.ebfchurch.org/usb3.pdf
In the link is a pdf that has a problem, and a jpeg to show what it should look like.
When I save the pdf I have tried turning illustrator off ill. editing capabilities and saved as a V.7 pdf. Not sure what else to try besides making the logo a jpg. Would upgrading to reader 8 help? Would this add that to my selections in illustrator?
The other anomalies are I's and some lines becoming a dotted line. This one is rarer and is easy to fix (somewhat). I simply rotate the object by a super small portion that no one would notice.
Thanks for any help.

Most likely some color separation or transparency flattening thing. Could also be the order of your groups/ shapes. Just hard to tell. For testing, I would save a PDF and do a preflight check in Acrobat or other such tool. This usually reveals any problematic stuff...
Mylenium

Similar Messages

Why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas

I am on a IMAC and upgraded to 10.6.8 Jan 2014. I am using CS4 Illustrator to create with. When i save my work as a pdf then reopen the pdf in Ill to make changes, the whole page has:
A.) Multiple clipping paths around it
B.) Most text has now become outlined. Not editable anymore.
C.) Gradient areas have multiple clipping paths of the single gradient area
D.) The gradient areas now become rasterized.
This is very frustrating as now all of my marketing files, some 300+, are worthless. I don't know where to look anymore to find the problem.
Please help.
Thank you very much

John,
I have the presets as you have shown. I had been editing the supplied items as you suggested. Then figured i should ask the questions of those who are better than I.
But still a bit confused as to why the new save places clipping paths around the document.
Thank you John and Monika for your help.
why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas
created by John Mensinger in Illustrator - View the full discussion
I do a save as "pdf" in the format pull down tab. I save to a folder on the hard drive. Where is the "Illustrator editability" check box? I presumed it is in Acrobat some where
but i seem to be lost.
It is in Illustrator's Save Adobe PDF dialog, which pops up before the saved file is written.
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6439399-644928/450-397/Untitl ed-1.jpg
Sorry i didn't mention this, but this seems to have occurred when using images and text from provided pdfs.
That's a critical fact. If you didn't do the original save, the above is moot, and it's too late to exercise any control over the save process. Someone else failed to save for editability. The only thing you can do is clean up/repair the content, (release clipping masks, rebuild rasterized elements, expand objects, etc.), and save correctly as AI. Then, if necessary, re-save as PDF with the correct settings.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6439399#6439399
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My Adobe Acrobat 10 Pro creates PDFs with a graph background. How do I make the background white?

My Adobe Acrobat 10 Pro creates PDFs with a GRAPH background. How do I make the scanned documents have a normal white background?

This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I will move your post to the correct forum so that it can get proper attention.
We also have many other forums relating to other Adobe products at: http://forums.adobe.com.
Out of curiosity, can you tell me how you found our forum page?

Why i can't create PDF with right format by LiveCycle?

Hello,
As we know that PDF format has four sections, the header, object body, cross-reference table and trailer.
But after I create a PDF by Adobe LiveCycle, and open it by UltraEdit or Notepad, I cannot find the cross-reference table and some objects, “trailer” word either .
I try to download several PDF files by follow link:
https://my.adobeconnect.com/_a295153/p10077996/?launcher=false&fcsContent=true&pbMode=norm al ,
and open them as the same way as before, it was the normal format I learn.
So, why my PDF is not the right format? And how can I create PDF with right format?
Thank you a lot!
Ellie

Adobe LiveCycle Designer makes XFA forms - a thin PDF wrapper around XML, no useful PDF page objects. Still, they are valid PDF. Like any PDF, you might not find a trailer or xref if a cross reference stream is used. See ISO 3200-1 7.5.8 "Cross-Reference Streams".

Problem in creating PDF with InDesign CS5.5

Problem in creating PDF with InDesign CS5.5:
exporting a file in pdf, setting "Press Quality" or "PDF/X-1a: 2001" and selecting "Crop Marks" and the surplus of xx mm, the elements contained in the MASTER page move from the original position or disappear at random.
Can you help me, please?
Thanks a lot.

Try Remove minor corruption by exporting

How to create PDF with Form Builder (T-Code:SPF) and how to use it?

How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >> Thank you very much!!
Edited by: Rob Burbank on Nov 11, 2010 1:04 PM

PDF forms also known as Adobe From or Interactive Forms.
Check this link -
Interactive Forms
REG:ADOBE FORM
Adobe forms
Regards,
Amit

Illustrator saves blank PDFs with information about missing content

I use Illustrator CS6 on OS X 10.8. Yesterday I noticed that my PDFs come out as blank files with the text
This is an Adobe® Illustrator® File that was saved without PDF Content.
To Place or open this file in other applications, it should be re-saved from Adobe Illustrator with the "Create PDF Compatible File" option turned on. This option is in the Illustrator Native Format Options dialog box, which appears when saving an Adobe Illustrator file using the Save As command.
which is actually a description that typically appears in AI files saved without PDF compatibility. It's not document-wise but rather application-wise issue because it happens even if I create a new Document, draw something in the middle of the canvas and save it. Also, all of my existing documents which used to save well before, do that now. Basically, I cannot save correctly a single PDF. But it seems that the exported documents must contain the data because they have different sizes based on the content.
There's no problem with saving in AI format. I hope that's enough information necessary for someone smart to diagnose this problem because I start to be desperate
Do you have any idea? Thank you.

Oh, my friend just recommended me to erase cache and it worked! :-) I erased folders ~/Library/Caches/com.adobe.Illustrator and ~/Library/Saved Application State/com.adobe.Illustrator.savedState and one of them did the trick :-)

Missing words creating PDF with Acrobat 7 (newly installed InDesign CS5)

Since a few days I have some curiosity creating PDF files!
Randomly the PDF output is missing whole words in the document but having spares in the right tracking for them in the document.
It occurs that the missing words are subject to another font however not all words in this font are missing in the document.
Also my printer tell's me if he's going to print the PDF (in this case a serial letter with pre-stamped addresses) his computer is breaking down completely and also printing hieroglyphs.
This document was printed from MS Word 2003 with "Adobe PDF" as printer.
I also use FreePDFXP, though the same error comes up.
In addition I tried several settings for the PDF with no effect in the outcome.
I am still working with Acrobat 7 (from CS2 suite) under WinXP Professional SP3 and hadn't any problems before installing my InDesign CS5 upgrade a few days ago.
I only can assume that the problem is InDesign CS5 but cannot prove it.
Anyone an idea on how to solve the problem?!
I am really annoyed about this since for the pre-stamped letters I already paid money to the mail service and the need to be in the mail today - otherwise I am loosing several 100 Euros to the paper-bin).

Thanks for your feedback.
However I checked all the settings in the joboptions. All fonts are to be embedded (100%) and I also actively selected the fonts to be transferred.
I am using TheSans from LucasFonts as Open Type.
For my document I have SemiLight as standard style and Bold for accentuation.
While the bold style will be printed in "bold only" lines, it is not printed in lines/paragraphs where also the SemiLight style is used.
When I change color of the words in bold, the effect inverts and only the bold style words are displayed but not the SemiLight text!
I have a second laptop with the same system and software configuration (Win XP Professional SP3; Acrobat 7), where the same document runs smoothly.
That's why I assume, that it must be the Indesign CS5 upgrade causing trouble (it's the only new addition to the first laptop).
Unfortunately Adobe has no answer here also.
The only solution would be to adopt my documents for this effect and follow the logic of the machine instead of my mind...
As we do so often since invention of computers...

Create PDF with printing restrictions

I am looking for a product that can create PDFs on a server from a VB.NET website application. It must be able to build some logic into the PDF to restrict
the printing capabillity to only allow a certain number of copies to be printed. Subsequent copies may be printed but must show different text and be watermaked as "copies". Is this possible with any of the Adobe products or any 3rd party products? We currently use abcPDF for .NET which allows us to create the PDFs from the application but it won't allow the restrictive printing as far as I can see.

You could certainly use Adobe LiveCycle Rights Management Server to secure the PDFs that you produce with restrictions on printing, viewing, etc.

Problem Creating PDF with Multiple Files in Pro. 7

I'm using Adobe Acrobat Professional 7 on a computer with Windows XP.
The problem is that when I try to create a PDF with multiple files everything just suddenly stops. There are 75 files involved and when it gets to around 41 or so (don't know the exact number because I turned away from my computer for just a moment), it just stops. There are no error messages; nothing. Just a blank Acrobat screen.
Last week I had a different problem which was resolved by an uninstall/reinstall and I was able to create the PDF with those exact same 75 files, but after the PDF was created I realised that some changes needed to be made. I dumped the PDF, made the appropriate changes and left it for the weekend. Today I the new problem has arisen.
Any ideas what the problem might be?

I've read many discussions about Acrobat and problems with server files, with the general solution being what you are doing... copy the files to a local hard drive

Right Click to convert webpage to pdf creates pdf with website headers but not iframe content

Hello
We are having a problem converting webpages to pdf with Acrobat. Out website uses Iframes to view the website we are converting to pdf. When I right click on the webpage and click convert to pdf everything works fine. But the pdf that is created is only the header of the page not the content of the iframe I right clicked on. If you go to file and print to pdf it works fine we get the content of the iframe in the pdf and not the rest of the webpage. But the users prefer to right click. Is there some way to fix this so we can right click to convert to pdf?
Thanks
Jason

I dont think acrobat can convert iframes to pdf (need to check). It can convert html, some javascript, images and swfs for example. Data driven pages, depending of the programming cant be converted too.

I need help with creating PDF with Preview...

Hello
I need help with creating PDF documetns with Preview. Just a few days ago, I was able to create PDF files composed of scanned images (notes) and everything worked perfectly fine. However, today I was having trouble with it. I scanned my notebook and saved 8 images/pages in jpeg format. I did the usual routine with Preview (select all files>print>PDF>save as PDF>then save). Well this worked a few days ago, but when I tried it today, I was able to save it, but the after opening the PDF file that I have saved, only the first page was there. The other pages weren't included. I really don't see anything wrong with what I'm doing. I really need help. Any help would be greatly appreciated.

I can't find it. I went into advanced and then document processing but no batch sequence is there and everything is grayed out.
EDIT: I realized that you cant do batch sequences in standard. Any other ideas?

Creating PDF with stylesheet from my website

How do I create a PDF directly from my website using a specially-styled page?
Joomla does it and I'm wondering how I can do the same thing. It's similar to a printer-friendly version. But when you click the "create PDF button", it asks you where to save and then creates the file.
Any ideas?

Here's what I did ....
I was rather dismayed that I couldn't use the features that were with QuickTime 7.6.3 so I got brave and took it out of the utilities folder where it was placed when I installed Snow Leopard. I then went into my Time Machine Backups, went to my computers saved library in the SYSTEM FOLDER copied ALL of the components, then pasted them into my HOME library in the new version of installed Leopard Files. When I open up QuickTime 7, I now have access to the two preference areas in the finder, one that now shows my previous registration code, and the other general app preferences. I was also able to convert files from one format to another like before. I haven't used this extensively, so I can't vouch that I might fall prey to some form of future conflict. But, hey, it's worth trying! You can also just go to downloads from apple and get Quicktime 7 and put it back into your utilities folder.

Creating pdf with super/sub script using indesign

Hi,
I want to create a pdf with textrise for subscript and super script using indesign. I am new to this. Kindly guide me to acheive the same.
Regards,
Kameshwaran A.

Hi Peter,
Thanks for the response. I have created the file in ID and exported / print (Both i have made) it to PDF. When i open the pdf and check the textrise value is 0. Actually it should be greater than or less than zero. I don't know what mistake i have made or how to acheive the same. Could you please tell me where i have made the mistake.
Thanks and Regards,
Kameshwaran A.

Creating PDF with Starting Properties

Dear all,
Most PDFs just open with the normal view. However, I have seen some PDFs that, when started, automatically show the bookmark navigation bar. Some PDFs start with all levels expanded in the navigation, others only with the first level expanded.
How is it possible to set that up when creating a PDF with Adobe 9?
regards,
Stefan Rehm

Yes, I have beeen doing that manually. I want to set up Acrobat to do this automatically for every PDF I generate. For example, I want every PDF to be automatically created to open with 100% magnification and the document title showing in the title bar instead of the file name. I don't want to have to do this manually. Is there some way to do this automatically when the PDF is generated?

Illustrator cs2 creates pdf with anomalies

Similar Messages

Maybe you are looking for