Illustrator CS3: how to join two lines

I have to join these blue lines. I need to get a figure like two red lines below. How can I do?

CIrcle the edge with lasso or direct selection tool and then Object > Path > Join

Similar Messages

Illustrator CS3: how to extend a line along its direction

This is my line
I have to extend it along its direction. How can I do?

If you want to extend it to a specific length/angle:
1. White pointer. Select the anchorPoint you want to move. Drag it and snap it to the anchorPoint at the opposite end of the segment. Leave it selected.
2. DoubleClick the white Pointer. Enter the desired angle and distance.
Or:
1. LineTool. Click (don't drag) at the "origin" anchorPoint. In the resulting dialog, enter the desired length and angle.
2. White Pointer: Select the anchorPoint you want to move and snap it to the end of the line you just drew.
3. Select and delete the line.
If you want to extend/shorten its current length by a specific length:
1. White pointer. Select the anchorPoint you want to move. Drag it and snap it to the anchorPoint at the opposite end of the segment. Leave it selected.
2. DoubleClick the white Pointer. Change the sign (+, -) of the movement values. Key + or - after the existing value(s) and the distance you want to add/subtract.
JET

How to join two tables

hi
how to join two tables using inner join if the first table has two primary keys and second table has 3 primary keys

Would describe type of joins in ABAP, which might differ with other joins.
The join syntax represents a recursively nestable join expression. A join expression consists of a left-hand and a right- hand side, which are joined either by means of INNER JOIN or LEFT OUTER JOIN. Depending on the type of join, a join expression can be either an inner (INNER) or an outer (LEFT OUTER) join. Every join expression can be enclosed in round brackets. If a join expression is used, the SELECT command circumvents SAP buffering.
On the left-hand side, either a single database table, a view dbtab_left, or a join expression join can be specified. On the right-hand side, a single database table or a view dbtab_right as well as join conditions join_cond can be specified after ON. In this way, a maximum of 24 join expressions that join 25 database tables or views with each other can be specified after FROM.
AS can be used to specify an alternative table name tabalias for each of the specified database table names or for every view. A database table or a view can occur multiple times within a join expression and, in this case, have various alternative names.
The syntax of the join conditions join_cond is the same as that of the sql_cond conditions after the addition WHERE, with the following differences:
At least one comparison must be specified after ON.
Individual comparisons may be joined using AND only.
All comparisons must contain a column in the database table or the view dbtab_right on the right-hand side as an operand.
The following additions not be used: NOT, LIKE, IN.
No sub-queries may be used.
For outer joins, only equality comparisons (=, EQ) are possible.
If an outer join occurs after FROM, the join condition of every join expression must contain at least one comparison between columns on the left-hand and the right-hand side.
In outer joins, all comparisons that contain columns as operands in the database table or the view dbtab_right on the right-hand side must be specified in the corresponding join condition. In the WHERE condition of the same SELECT command, these columns are not allowed as operands.
Resulting set for inner join
The inner join joins the columns of every selected line on the left- hand side with the columns of all lines on the right-hand side that jointly fulfil the join_cond condition. A line in the resulting set is created for every such line on the right-hand side. The content of the column on the left-hand side may be duplicated in this case. If none of the lines on the right-hand side fulfils the join_cond condition, no line is created in the resulting set.
Resulting set for outer join
The outer join basically creates the same resulting set as the inner join, with the difference that at least one line is created in the resulting set for every selected line on the left-hand side, even if no line on the right-hand side fulfils the join_cond condition. The columns on the right-hand side that do not fulfil the join_cond condition are filled with null values.
Note
If the same column name occurs in several database tables in a join expression, they have to be identified in all remaining additions of the SELECT statement by using the column selector ~.
Example
Join the columns carrname, connid, fldate of the database tables scarr, spfli and sflight by means of two inner joins. A list is created of the flights from p_cityfr to p_cityto. Alternative names are used for every table.
PARAMETERS: p_cityfr TYPE spfli-cityfrom,
p_cityto TYPE spfli-cityto.
DATA: BEGIN OF wa,
fldate TYPE sflight-fldate,
carrname TYPE scarr-carrname,
connid TYPE spfli-connid,
END OF wa.
DATA itab LIKE SORTED TABLE OF wa
WITH UNIQUE KEY fldate carrname connid.
SELECT ccarrname pconnid f~fldate
INTO CORRESPONDING FIELDS OF TABLE itab
FROM ( ( scarr AS c
INNER JOIN spfli AS p ON pcarrid = ccarrid
AND p~cityfrom = p_cityfr
AND p~cityto = p_cityto )
INNER JOIN sflight AS f ON fcarrid = pcarrid
AND fconnid = pconnid ).
LOOP AT itab INTO wa.
WRITE: / wa-fldate, wa-carrname, wa-connid.
ENDLOOP.
Example
Join the columns carrid, carrname and connid of the database tables scarr and spfli using an outer join. The column connid is set to the null value for all flights that do not fly from p_cityfr. This null value is then converted to the appropriate initial value when it is transferred to the assigned data object. The LOOP returns all airlines that do not fly from p_cityfr.
PARAMETERS p_cityfr TYPE spfli-cityfrom.
DATA: BEGIN OF wa,
carrid TYPE scarr-carrid,
carrname TYPE scarr-carrname,
connid TYPE spfli-connid,
END OF wa,
itab LIKE SORTED TABLE OF wa
WITH NON-UNIQUE KEY carrid.
SELECT scarrid scarrname p~connid
INTO CORRESPONDING FIELDS OF TABLE itab
FROM scarr AS s
LEFT OUTER JOIN spfli AS p ON scarrid = pcarrid
AND p~cityfrom = p_cityfr.
LOOP AT itab INTO wa.
IF wa-connid = '0000'.
WRITE: / wa-carrid, wa-carrname.
ENDIF.
ENDLOOP.

How to join two internal table rows in alternative manner into one internal table?

How to join two internal table rows in alternative manner into one internal table?
two internal tables are suppose itab1 & itab2 & its data
Header 1
Header 2
Header 3
a
b
c
d
e
f
g
h
i
Header 1
Header 2
Header 3
1
2
3
4
5
6
7
8
9
INTO itab3 data
Header 1
Header 2
Header 3
a
b
c
1
2
3
d
e
f
4
5
6
g
h
i
7
8
9

Hi Soubhik,
I have added two additional columns for each internal table.
Table_Count - It represents the Internal Table Number(ITAB1 -> 1, ITAB2 -> 2)
Row_Count - It represents the Row Count Number, increase the row count value 1 by one..
ITAB1:
Header 1
Header 2
Header 3
Table_Count
Row_Count
a
b
c
1
1
d
e
f
1
2
g
h
i
1
3
ITAB2:
Header 1
Header 2
Header 3
Table_Count
Row_Count
1
2
3
2
1
4
5
6
2
2
7
8
9
2
3
Create the Final Internal table as same as the ITAB1/ITAB2 structure.
"Data Declarations
DATA: IT_FINAL LIKE TABLE OF ITAB1.          "Final Internal Table
FIELD-SYMBOLS: <FS_TAB1> TYPE TY_TAB1,     "TAB1
                               <FS_TAB2> TYPE TY_TAB2.     "TAB2
"Assign the values for the additional two column for ITAB1
LOOP AT ITAB1 ASSIGNING <FS_TAB1>.
     <FS_TAB1>-TABLE_COUNT = 1.             "Table value same for all row
     <FS_TAB1>-ROW_COUNT = SY-TABIX. "Index value
ENDLOOP.
"Assign the values for the additional two column for ITAB2
LOOP AT ITAB2 ASSIGNING <FS_TAB2>.
     <FS_TAB2>-TABLE_COUNT = 2.                  "Table value same for all row
     <FS_TAB2>-ROW_COUNT = SY-TABIX.      "Index value
ENDLOOP.
"Copy the First Internal Table 'ITAB1' to Final Table
IT_FINAL[] = ITAB1[].
"Copy the Second Internal Table 'ITAB2' to Final Table
APPEND IT
LOOP AT ITAB2 INTO WA_TAB2.
APPEND WA_TAB2 TO IT_FINAL.
ENDLOOP.
"Sort the Internal Table based on TABLE_COUNT & ROW_COUNT
SORT IT_FINAL BY ROW_COUNT TABLE_COUNT.
After sorting, check the output for IT_FINAL Table, you can find the required output as shown above.
Regards
Rajkumar Narasimman

How to join two ITAB

Hai
         i have created an program using ALV and i had created two internal tables namely ITAB and ITAB1.But i wasn't unable to get an output.so i like to know how to join two ITAB in ALV.

MAhesh,
Check this ex:
ITAB1 is having fields "A","B", "C".
ITAB2 is having fields "A","D", "E".
Create i_final internal table to have all fields of 2 internal tables.
i_final is having "A","B","C","D","E".
SORT itab1 ,itab2 by A
LOOP AT ITAB1.
READ TABLE itab2 WITH KEY a = itab1-a BINARY
                                                              SEARCH.
   IF SY-SUBRC EQ 0.
     MOVE : itab1-a TO i_final-a,
                  itab1-b TO i_final-b,
                  itab1-c TO i_final-c,
                  itab2-d TO i_final-d,
                  itab2-e TO i_final-e.
    APPEND i_final.
   ENDIF.
ENDLOOP.
Don't forget to reward if useful.....

How to join two similar layers together?

Hey all! Please help me out, It is a little thing to do, but I am really stocked at this. How to join two layers together?? For example two Text layers or anything. Pleas can you describe the way to do it and write (if it exist) the shortcut for it?
Now I know, that layers in AAF can't be joined, there is just a "Pre-Compose". But this function is disabled the FX colone, and I have to have it there.
In this tut http://www.videocopilot.net/tutorials/shatterize/ he joined two text layers. But with some shortcut so I don't know, how he did it.
Can anyone help me plz?
THX for reply

Lufty09 wrote:
Yes, but this is disabled the Fx button :/
Now you need to look up precomposing in the help system. It's all explained there.
Nesting and precomping are advanced functions and require careful planning or inspired improvisation within the limits of the software. You also need to look up how the rasterization button works in its two operation modes.
bogiesan

How to join two open endpoints?

How to join two open endpoints?
I keep getting this error message even though the endpoints do not have this: "To join, you must select two open endpoints. If they are not the same path, they cannot be on text paths nor inside graphs, and if both of them are grouped, they must be in the same group."
I've ungrouped everything.
I've tried using the pen tool to manually join.
I've moved the endpoint, then tried joining them.
I've tried command+J.
Same message everytime.
And if I use the Pathfinder, I'll get unwanted results (i.e. a new path going right though the art)
What's going on!?

blueribb,
While uploading an AI file is unsorted, you may consider at least one option:
One is that you have at least one hidden extra Anchor Point, either on one of the paths or as stray or belonging to a third path.
You may find out by:
1) Using the Direct Selection Tool to click, not drag over, both end Anchor Point and then Cmd+J, and/or
2) Using the Direct Selection Tool to click, not drag over, each end Anchor Point by itself and then move it a bit.

How to join two distribution rule together in one distribution rule

how to join two distribution rule together in one distribution rule,and every dist. rule has many cost center.

Hi,
Welcome you post on the forum.
You can create a new rule to include these two rules.
Thanks,
Gordon

Illustrator CS3 crashes if join lines on different layers

Sent in a crash report earlier, but didn't realize the source of the error at the time -- which was that the two lines I was attempting to join were located in separate sublayers. Illustrator did not give me an error message when I attempted to join the lines, instead the lines I had joined simply vanished. If I then hit command Z to undo, the file would crash. This behavior was repeatable multiple times.
I realize this is a bug in an older version of the software, but having this info in the forums may be of use for people still running CS3, and, if this bug has not yet been corrected in more recent versions of the software, then I hope the tech folks will take notice.

Peter, Steve -
That's interesting - and I was sure I'd isolated the source of the problem. I'm working in the mac OS (snow leopard) and CS3 suite is the Design Premium version. I had 3 sublayers in my layer, and each of those sublayers had about 20 paths in them. The behavior occurred repeatedly when I tried to join 2 lines that were in different sublayers (one of the endpoints was created by clipping a section out of an oval on one of the sublayers). I thought it was not a random behavior, b/c I reproduced it 4 or 5 times in a row, with 2 different pairs of lines. Yet I was able to join lines on any sublayer with no problem, and when I pulled all the lines out of the sublayers, I was able to join the two sets of lines that had previously been causing the crash without any difficulty. So I'm not sure why your tests did not reproduce the problem -- or why I had the problem in the first place.
Thanks,
Suzi

How to display two-lines strings item

Hi,
How can I display list of two-line string items? Each Item in the list should have a phone number and a time. It should look similar to the "dialled numbers" display where each item has an image, and two-line string.
Is it possible doing it with the high-level API or should I go low-level?
Thanks in advance
Imzadi

use: list.setFitPolicy(Choice.TEXT_WRAP_ON)

How to join two lists and display the results in datasheet view.?

hello,
i have two lists that i would like to join, i know a method that has been described in the link below
http://www.codeproject.com/Articles/194252/How-to-Link-Two-Lists-and-Create-a-Combined-Ciew-i
however, here the data view is only limited to 30 rows and my resultant list is huge. I would like to know if there is a possibility to view the resultant list in a data sheet view ?

I don't believe you can use the OOTB Datasheet view when joining lists. However, you should be able to increase your limit from 30 items to as many as you need (that doesn't trip the threshold set in Central Admin).
Dimitri Ayrapetov (MCSE: SharePoint)

How to join two MP4 movies with iMovie '11?

Just after a quick bit of help here. I'm not a movie making enthusiast so never used iMovie before and never will again most likely. However I do have 2 mp4 movies about 4 minutes each that I SIMPLY want to join together.
I've searched and seen reference to dragging the fils into a project then just export as one but for the life of me if import the files I can't seem to find anywhere that provides a view of the two files as thumbnails so I can just drag them to say this one first, this one second. Join please. I seem to get streams and streams of individual frames with sliding lines and what not and the best I seem to be able to get is about 4 seconds at a time. Surely ther MUST be an easy way to just join two movies together without going into advanced frame by frame editing.
It's not the most intuitive piece of software and I don't have any desire to learn it. Problem is I am in a **** of rush with this and at the end of a 14 hour image managament day which is making me less than patient with iMovie.

QuickTime X can join your two files. Edit menu "Add Clip to End..."

How to train two line texts in NI Vision assistant ?

Hi guys,
I have managed to train single line of text in OCR (NI Assistant)..as attached..however I dont know how to train two (or more) line of texts..for example the car's plate number below:
WDP
3194 - as attached
I want my script.scr file to be abled to read any type of line/string..whether it's single, double, triple etc..
Can anyone show me the way how to do it.
Thank you in advance
Suliadi

Starting with Vision Development Module 2013, OCR supports multi-line reading. You can create a single region of interest that emcompasses all of the lines that you need to read along with the expected number of lines and it will output the text for the best lines. If you are using an earlier version, you will need to have a separate region of interest for each line of text. If you don't know how many lines you will have, one method is to do an edge detection to determine if text is present.
You can learn more about the multi-line support in this white paper and even more information in the Vision Concepts Manual.

How to join two or more surveys to one big survey?

Hello Experts,
how do I join two or more littel surveys to one big survey with one tile and varios sections and subsections?
Thanks for help.
Cristina

As I did not get any answer, I suppose it is not possible, unless you join the coding.

How to join two projects?

How do I join two 45 minute (.prel) projects?

Portland42
What version of Premiere Elements are you using and on what computer operating system is it running?
For now, I will assume Premiere Elements 12/12.1 on Windows 7, 8, or 8.1 64 bit.
You cannot import one Premiere Elements (any version) project file (project.prel) into another.
1. Windows Only. Use ClipMate in conjunction with Premiere Elements for a copy/paste insert between
two project files.
ATR Premiere Elements Troubleshooting: PE: ClipMate Copy/Paste Between Projects
2. For Windows or Mac Premiere Elements users....export the Timeline content from project 1 to an
appropriate file saved to the computer hard drive and then import that export into the second project with
counterpart project settings.
If you need help regarding the project settings for "2", please do not hesitate to ask. I am a hands on user of
Premiere Elements versions.
Thanks.
ATR

Illustrator CS3: how to join two lines

Similar Messages

Maybe you are looking for