ILLUSTRATOR CS3 PROBLEMS

I used to ignore the Repair, Replace, or Ignore dialog box, and just press ignore. Now the file is just a blank white screen when it opens. How can I recover this file, and I've tried almost everything that I know. When I roll over the file in my documents, It still says 54 MB's. so the size of the file is still there, I just cant see any of the images i created anymore. How can I recover my file, and finish the artwork? Thank you in advance.
Best,
[email protected]

Jim,
What happens if you create a new document and tick Paste Remembers Layers in the Layers palette flyout (remember to untick it again), then File>Place the troubled file in it?
Or, if it has been saved with Create PDF Compatible File ticked, you may see what may be there if you open the file with Acrobat/Reader.
That is what may be tried to see how much may be rescued that way.
If all, or too much, is missing, you may go on to other ways:
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error -occurred-pdf2dtp-file-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-ill ustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator -files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html

Similar Messages

  • Illustrator CS3 - problems saving as pdf  (or pdf-compatible)

    Hi,
    My office are trialling Illustrator CS3 as we're getting some business card type work and we'd like to be able to send the proposed designs to the client as a multi-page PDF.
    Unfortunately, I'm having a terrible problem when saving a particular file i) as .ai format, if PDF compatibility is checked, &
    ii) as a PDF.
    In both cases the progress bar goes half way and then Illustrator hangs, eventually saving after 3 hours, at the last try!
    The multi-page document consists of 7 x A4 tiles, I know this sounds big but actually there's not that much stuff in it: on each page there's a bit of text, a gradient, 3 monochrome logos and two drop-shadows. There is also a spot colour and a linked image (500kb). If/when it eventually saves the pdf is <150kb and the .ai is <2mb.
    I've tested various options when saving to try to trace the problem and it ONLY hangs when PDFing is involved; it saves with compression really fast.
    Obviously the time it's taking isn't practical so I'm hoping someone can suggest what might be wrong. The PC is a decent spec: WINXP sp2 / 3GHz P4 / 1mb ram / 256mb gfx / 1.5Gb swapfile / 5gb defragged space on HD. I've looked at the Windows Task Manager as Illustrator is trying to save - the CPU is only up to 50% and the swapfile usage is 300mb - if it's taking so long why isn't it maxed out?
    Hope someone can help, thanks in advance.
    smithy_ss

    I can't save a 1.4 meg .ai file as .pdf. Program freezes.

  • Illustrator CS3 problem

    Hi,
    I've been having a bit of what I believe is a problem with Illustrator CS3. I created a graphic layout using Photoshop CS3 and saved the finished product as a jpg to open up and "slice" in illustrator to code it, but every time I open up the image it comes up about half the size of the actual image. At first I thought I had saved the jpg as a smaller size than what it's supposed to be, but when I looked in my files it's the size it should be. I also tried exporting the finished work from photoshop to illustrator, but it did the same. I've also searched around online, including search engines, adobe help, faq, and forums, and have found nothing on this.
    If you want/need specifics on my computer, I can give them, but I am running Windows Vista.

    How exactly would I go about doing that? I edited the resolution and it made the image smaller/larger overall. I've never had to mess with resolution or DPI before because I've never had this problem so I'm quite green about it.

  • Can't Copy and Paste into Illustrator CS3 from Firefox 3!

    I read these things all the time, but first time posting, so you KNOW this problem is annoying me.
    I could always copy and paste from Firefox 2 into Illustrator CS2/CS3. However, once I upgraded to Firefox 3 I no longer can! I get the annoying "Quicktime and a decompressor are needed to see this picture." I can't believe more people aren't complaining more about this. Save your time posting about "Illustrator is a vector program, and Photoshop is pixel based," I know I have been able to do it before so that is not the issue. Any light that could be shed on the situation would be great! Thanks in advance.

    I found that FF3 originally renamed .jpegs to the JFIF format when draging and dropping to the desktop, and it was not until March when the code was finalized that that you could drag and drop to your desktop without the conversion. You get around the illustrator CS3 problem a number of ways...drap and drop to the desktop and then to illustrator CS3, Drap and drop to photoshop CS3 and then to Illustrator CS3 or save as to the desk top, or use an older version of Firefox. I am currently tyring to determine if the JFIF renaming issue is what is preventing the direct drag and drop to Illustrator, and if there is a fix for issue. Any help out there or ideas would be helpful.

  • Image Link Problems in Illustrator CS3

    Am running on Mac OS 10.4.11. Mac is a Dual 2GHz PowerPC G5. File server is an IBM x3650, running FullPress Software and Xinet and Flashnet.
    When saving files in Illustrator CS3 with preserved image links to hi-res images on the server, other users who later open that ai file, have to manually relink to images on the server. If the file is opened on the Mac that created it, images link automatically when opened again. The problem is that other Macs do not see the links/paths to the images.
    It is frustrating and time-consuming. The problem seems to be isolated to just 2 specific Macs. One with the spec as above, and the other is a 2x2.66GHz Dual-Core Intel Xeon, running on the same Mac OS.
    All software installs are same on all macs in my studio.
    The overall problem is : 17 Macs. 15 of these can open files created on each others Macs without issue. However, if files were created on the 2 "problem Macs", link issues arise. The 2 problem Macs have link issues with ANY other mac when opening files saved on any other Mac.
    Sorry for long winded nature of this, but can anyone help? Have tried all sorts and have run out of ideas on this. URGENT help needed! Thanks.

    Thanks Ian and Jim.
    Have solved the mystery.
    Opened files in Text edit, and the links defined section, did show ghosted volumes on problem macs.
    So, went to desktop > From the Go menu, select Go to Folder >then entered "/volumes"
    This brought up the volumes and highlighted some anomalies. Folders appearing with same name as my server, meaning when the server mounted it added a suffix of -1, -2 etc.
    MANY THANKS Gentleman.
    Tim.

  • Weird Z and Y key swap and arabic filename problems in Illustrator CS3

    Hi
    I am having some very weird problems with Illustrator CS3.
    At completely random times, the software starts to think my Y and Z keys have swapped places. i.e. When I type anything or use any shortcuts, the opposite letters appear and are used.
    Also from time to time, when I save a file, the filename is written in Arabic and I have to rename the file again in Explorer to correct this.
    Both of these problems are random and a restart or Illustrator usually fixes both of these. But what a pain and waste of time.
    Anyone else getting problems like this?
    Oh, I'm using Windows Vista.
    Thanks
    Mr M

    My guess is, it is related to Windows. Try to press shift and ctrl at once if the problem occurs. The keys should be switched back...
    You have probably installed more than one keyboard in Windows. Shift-ctrl is the standard way to switch between them. You can change this in the Windows keyboard configuration file.
    I had this problem with a German and a VS keyboard installed.

  • A problem highlighting/selecting text in Illustrator CS3

    In several instances I can't highlight text to copy or to edit, other times it works fine. If I click the radio button for the text in layers (other layers may be locked to prevent accidental selection), the baselines appears and I should be able to highlight the text, but I can't. If I highlight some other unaffected area of text successfully (unlocked layers), sometimes it will allow me to select the problem text directly after. Then it will go back to being a problem, why?

    I'm using the general text tool, I've locked the other sublayers to avoid accidentally selecting those items. Then I click the radio button on the sublayer I wish to edit or copy, which reveals the baselines. Then if I click within that object to highlight text with the cursor, the text tool creates a new textbox/sublayer and does not highlight the text I intended.
    From: Monika Gause <[email protected]<mailto:[email protected]>>
    Reply-To: <[email protected]<mailto:[email protected]>>
    Date: Wed, 26 Oct 2011 14:49:40 -0600
    To: Roger Daleiden <[email protected]<mailto:[email protected]>>
    Subject: A problem highlighting/selecting text in Illustrator CS3
    Re: A problem highlighting/selecting text in Illustrator CS3
    created by Monika Gause<http://forums.adobe.com/people/Monika+Gause> in Illustrator - View the full discussion<http://forums.adobe.com/message/3992086#3992086

  • Problems reinstalling Illustrator CS3

    I was having issues with Illustrator CS3, it kept crashing, so in hopes of fixing the problem I uninstalled and am now trying to reinstall.
    When I put the install disc in, it starts to go through the process then asks for me to put in InDesign CS4 disc. I do and then a minute later it asks for me to put in the Illustrator CS3 disc. And it keeps going back and forth like that and it doesn't seem to be making any progress in installation.

    Illustrator CS3, InDesign CS4
    It is on a PC so we did an uninstall through the control panel.

  • Gradient with stroke problem Illustrator CS3

    We make a gradient object in Illustrator CS3 and give it a stroke which is centered. Then we rotate the object and the gradient rotates with the object.
    But then when we put the stroke alignment to inside or outside the gradient fails. It shows the gradient in the original 0-position instead of the angle we have created. When we put the stroke alignment back to center the gradient shows as we meant it to show again.
    When stroke alignment is on outside or inside before we rotate the object it shows the same problem.
    But when I copy an object from CS2 with an angled gradient and a inside or outside aligned stroke. The problem isn't there. When we start copying the object within CS3 the problem shows again (not when I use alt-key to copy, but with ctrl+c and then ctrl+v, ctrl+f or ctrl+b).
    Illustrator CS2 didn't have this problem. But now in CS3 we have it. I used to have this same problem in old versions from Macromedia Flash. But I never had it with Illustrator.
    Is this a bug or do we need to handle our gradients in a different way when using Illustrator CS3?

    It's a memory issue. If you scale your artwork down (say, to 50%), then save, it should work (it can be scaled up in the page layout software). If you're using raster effects you'll have to make sure they scale as well and that your raster effects resolution is appropriate for the final output size.

  • Devanagari MT problem in Adobe InDesign & Illustrator CS3

    Someone is helping me create a graphic by emailing me the Hare Krishna mantra in Devanagari MT. Devanagari MT this person has sent me is editable and copy and paste and displays fine in Pages 08, but when I copy and paste the same script (with the Devanagari QWERTY keyboard selected) into Adobe InDesign or Illustrator CS3, the diacritics on the conjuncts separate like there is a kerning problem or something.
    The same problem occurs when I try to type HRE (with the Devanagari MT QWERTY keyboard selected) in InDesign to get 'Hare'.  'Ram' types and display displays OK because there are no diacritcs.
    Also, I am not a Sanskritist and I have no idea how to get the word 'Krishna' to appear correctly in this font. Typing Krsna and Krishna doesn't come close to the correct Devanagari script. Anyone know the keystrokes to get those conjuncts in Krishna's name?

    Old Adobe stuff doesn't normally support Devanagari.  See these notes:
    http://m10lmac.blogspot.com/2010/07/new-plug-ins-for-complex-scripts-for.html
    http://m10lmac.blogspot.com/2009/02/adobe-app-language-improvements.html

  • Installation problem with free trail version of Illustrator CS3.

    I try to install the free trail version of Illustrator CS3.
    I have this error message: A problem was encountered while tryng to load trial period for adobe Illustrator CS3.
    I reinstall the software and have the same problem.
    I uninstall the software and have the same problem.
    can you help me ?

    You probably need to contact Customer Support.

  • Problems with saving in Illustrator CS3 - Windows

    I'm using Illustrator CS3, Windows XP. Even the smallest files take a very long time to save. I try to save and it initally appears as if nothing is happening. If I click again, a portion of my screen goes white and the hour glass sits for what feels like forever while "Not responding" appears next to Illustrator in the bar. Eventually it finishes. Have run into the same problem with PhotoShop a couple times as well. Seems to have started after my upgrade to CS3. Can anyone help?

    "it initally appears as if nothing is happening" - no-no, disk indicator should be bright and nearly no-blinking!
    Solutions are (depending on the problem severity):
    1. Make more layers (even for the same kind of objects, especially for texts)
    2. Use RAID 5 disks for scratch files (VelocyRaptor is the best choice)
    3. Use i-RAM for scratch files (if the project not too big)
    4. Use RIndMA disk (http://hardwareforall.com/ww/serverRAMdisk.html) for scratch files

  • A familiar 'Illustrator CS3 on iMac G5' problem?

    Hello folks,
    I should possibly post this on the Adobe forums too, but I'd like to cover the 'hardware' angle here first.
    I'm a graphic designer. I've been working on a multiple-page newsletter in Illustrator CS3 (granted, I should normally use InDesign CS3, but I had to stay with Illustrator for this particular assignment). Each page is on its own layer and the entire document has character and paragraph styles applied to its type.
    The problem is it's taking absolutely AGES to format any type. Any action, from applying a style to even deleting a single space takes no less than 3 to 4 seconds. You can only imagine how frustrating this is! (not to mention the amount of time I'm seeing eaten up...)
    Yesterday, some layers seemed to respond faster than others, but today all were identically slow. Each page is a simple layout with just one image and one block of text - so it's not even a heavy/complicated file. I have lots of unused RAM left when working (over 1GB unused as I check on the iStat widget), so no issue there. However, I notice the fans become louder and the CPU is maxed out at about 95% usage when performing these tasks!
    How can this be? Is there anything I should do to 'optimise' either the application or the system itself? I'm not sure if this is a hardware or software issue at present.
    Does anyone recognise a pattern here from similar experience? Any advice would be most helpful.
    Thanks much.
    Steve.

    Boot up from your System Install Tiger DVD & run the repair disk/permissions options.
    You may also wish to do the following if your fans are still running louder than usual.
    http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).

  • Problems illustrator cs3 on windows 7 64bit

    I've got a problem with my new computer, its a new hp workstation with windows 7 64 bit. Illustrator cs3 uses just a smal part of my virtual memory and is not stable. When i try to export to psd or jpeg it runs out of memory. My computer got a quad-core processor with more then 6 gb installed RAM.
    Is there a way to avoid or to cure this problem?

    My computer got a quad-core processor with more then 6 gb installed RAM.
    Of no relevance whatsoever. As a mostly single-threaded 32bit app, AI doesn't care for any such things. assuming, bloat features would not get in the way, you could probably run it on a 10 year old machine and get the same performance. Anyway, CS3 is not safe on Win 7, even more so the 64bit version, so this is probably all that needs saying. You can toy around with compatibility modes and all that, but whether this will help you in any way, is anybody's guess. so at the risk of sounding like big red A's marketing department, giving the CS4 trial a spin and then upgrading might be worth your time and money...
    Mylenium

  • Problems with line widths smaller that 1 pt in Illustrator CS3 in Spanish

    I am asking this for a friend who doesn't speak English; I don't work in Illustrator and don't even know the program. She is using Illustrator CS3 in Spanish under Windows XP Service Pack 2 also in Spanish in a machine with 4 GB RAM and 500 GB HD. As in many non English speaking countries, the decimal separator in Spanish speaking countries is the comma (,), not the point (.).
    Her problem is related with applying line widths smaller that 1 pt using the dropdown list of values. Values smaller that 1 pt appear in the list with a point, not a comma, as separator: 0.25 pt, 0.50 pt and 0.75 pt instead of the expected 0,25 pt, 0,50 pt and 0,75 pt. This wouldn't matter at all; the problem is that trying to apply any of these values resuls in 1 pt wide lines. She has made a video (less than one minute) that explains the situation much better than I could do:
    http://es.tinypic.com/usermedia.php?uo=AE87RzhYHCdn5HPHtpPkoA%3D%3D
    Curiously, if she introduces values by hand, they are accepted in these two forms: 0,25 pt, and 1/4 pt, and applied correctly, both showing as 0,25 pt (not 0.25 pt).
    Of course she can introduce values by hand every times she needs thin lines, but this is a wokaround, not a solution to her problem. Which is aggravated by the fact that she constantly has to use the thiner lines.
    In desperation, she reinstalled Illustrator CS2, where the problem does not exist and everything works as expected. But she needs the new features in CS3.
    I apologize if this is a known issue with a known solution, but I couldn't find anything about it in the FAQs, and after a couple of searches and wading through several pages of the topic list of this forum.

    Back to report. I suggested to my friend to try Jacob's idea first, as it was the easier and fastest. However, I also suggested a small change, due to the following. As the dropdown list was already showing points as decimal separators, I thought it might be better not to change the language. I suggested instead to customize the settings for numbers in her chosen Spanish, changing the decimal separator from the comma to the point, and the thousands separator from the point to the comma.
    She has just reported that she changed the language from Spanish to English, and then back to Spanish; and then she customized the separators as I had suggested. That did it; with this change, she can apply the smaller widths using the dropdown list, and she is so happy with her success, that she isn't going to try James's suggestion for the time being, although she may do it later on.
    By the way, my friend lives in another country and we are communicating through the Forums in Spanish. This explains why communications have been very slow, and also why I don't know if she shifted from Spanish to English and back to Spainsh because this made no difference, or for some other reason. In any case, she asked me to thank very heartly Jacob and James for their help.

Maybe you are looking for