Illustrator CS5 issues after upgrading to OS X Yosemite
Hi, I upgraded to OS X Yosemite recently and since then
my Illustrator CS5 has started playing up. A few days ago I noticed it
was taking a long time to save and now it won't let me export files to jpeg
format. It crashes. Please help!
Adobe has a forum. I'd look there to see if others are having issues.
It is entirely possible that CS5 isn't fully compatible with Yosemite. Adobe's preferences is to push/support their subscription Creative Cloud, and making older software work is kinda counter to that. (and honestly I couldn't install CS2 on my windows 8 machine, the minimum compatibility was CS3 for Windows 8, so it's not unknown for Adobe programs to have a limited backwards compatibility)
Similar Messages
-
Wifi issues after upgrading from Maverick to Yosemite. No solutions have worked.
I upgraded to Yosemite 10.10.1 from Mavericks. Having wifi issue where I can't connect to my home network. It connects for 5 seconds than I get "no IP address", and then the connection drops. A free local wifi connection does work. Any ideas until this issue is fixed by Apple? My home router worked fine in Maverick. I tried all the online suggestions but nothing has worked. Have not downgraded yet to Maverick but thinking about it.
Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4) -
Anyone else having wi-fi issues after upgrading Macbook Air to Yosemite?
We just upgraded brand new Macbook Air to Yosemite, and are now have the most sluggish internet imaginable. Any Ideas?
Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart the router and the broadband device, if they're separate. Any change?
Run Software Update and install all available updates for OS X or the computer's firmware. Any change?
Are you connected to Ethernet as well as Wi-Fi? If so, disconnect the Ethernet cable or adapter and test.
If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
Are any other devices on the network, and if so, are they the same?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
If you're running a MacBook with the lid closed, open the lid. Any difference?
Start up in safe mode and test. Any difference?
Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference? -
Start up issue after upgrading to OS X Yosemite 10.10
Recently i have updated to OS X Yosemite from Maverick. I am unable to start my system normally. I need to give CTRL+R all the time when i need to start. And at half way loading (below apple icon) it is taking long time(More than 20 mins). Then i am going with Start up using disk option.
Kindly help me in fixing this and making my Mac to start up normally.Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2) -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsidi am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid -
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
Good Morning Good People,
I have run in to some issues after upgrading my 10.1.0.5 database to 10.2.0.5. Initially after the firtst upgrade from 10.1.0.5 to 10.2.0.0 one has to run Critical Patch set 4 to get to 10.2.0.5. Well after initial up grade everything worked fine. I could connect to the database from within the server as well as remotely through SQL*PLUS client. However, after completeing the patch I'm still able to connect to the database from within the server, but remotely i get the following error:
ORA-12514 : TNS Listener does not currently know of service requested in connect descriptor.
I also get Error ORA-12505: TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=mcquery2)(protocol=tcp)(port=1521))(connect_data=(sid=mcquery)(server=dedicated)))
I've tried serval different things to trouble shoot the issue but nothing seems to work.
If anyone has run into s similar issue please help. This is ruining my weekend! LOL!
Edited by: user10835577 on Aug 29, 2010 9:15 AMFrom the client or the server?
SERVER:
tnsnames.ora:
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
FROM REMOTE SQLPLUS Client:
tnsnames.ora
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Client_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cotsdot370.cotsdot.dom)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
Thanks,
Malcolm
Edited by: user10835577 on Aug 29, 2010 12:01 PM -
IPhone 4s issues after upgrading to IOS 8
Have few issues after upgrading to iOS 8
- Phone hangs every few hours, reboots automatically
- Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
- Searching for contacts is a problem
- Apps hang (especially facebook)
Any way to go back to iOS 7 ?
Any other tips / tricks appreciated..
VenkatNo way to come back to iOS 7 ...
But did you tried to reset all settings (general -> reset -> all settings) ?
For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings). -
Autoconfig issue after upgrading 12.1.1 to 12.1.3
Hi all,
I am getting below mention autoconfig issue after upgrading 12.1.1 to 12.1.3.
jtfictx.sh started at Mon Mar 28 08:28:50 EDT 2011
SQL*Plus: Release 10.1.0.5.0 - Production on Mon Mar 28 08:28:50 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
DECLARE
ERROR at line 1:
ORA-29858: error occurred in the execution of ODCIINDEXALTER routine
ORA-20000: Oracle Text error:
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operation
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 665
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 96
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Product
ion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
jtfictx.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
i got below mention some solution from metalink, but that does not working.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=743720.1
according to note we need to create index but its giveing below metion error.
SQL> @jtfiaibu.sql jtf jtf apps
Connected.
DECLARE
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10758: index owner does not have the privilege to use file or URL datastore
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 37
Thanks in advance,
Sandeep.Hi,
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operationPlease make sure you have no invalid objects. And also please see of these helps. I know these are for older version, but please check
Script jtfictx.sh Failed While Attempting To Run The Autoconfig On APPS Tier [ID 1271186.1]
Autoconfig Returns ORA-29868 from jtfictx.sh [ID 386740.1]
By the way did u iinstall companion/examples CD after installing OracleSoftware
Thanks,
Taher -
After upgrading to OS X Yosemite i have aventail issues...
After upgrading to OS X Yosemite i am experiencing issues with my Aventail software. I am getting a java error message but java is up to date. Is anyone else having issues with this? It takes away my ability to work from home which is no good. Any help would be appreciated.
Java Version 8 update 25 (build 1.8.0_25-b17)
Aventail Connect vs 10.71.322I've solved installing Java 6.
Instructions here:
Java for OS X 2014-001 -
Audio issues after upgrading to OS X 10.10 (Yosemite)
Hello,
I have been facing audio issues after upgrading to OS X 10.10
- No sound in VLC
- Re-booting with Option-Command-P-R did not work
- System sounds are fine
- Quicktime Player works just fine
I tried:
- Plugging in earphones while video was playing on VLC
- F10/F11/F12 while video was playing on VLC
- Re-boot with Option-Command-P-R keys (found on a thread elsewhere)
- Played something in Garage Band (found on a thread elsewhere) and restarted VLC
None of the above solved the issue
Any one else facing similar issue with VLC on 10.10?
How did you manage to fix this?
I am running VLC 2.1.5 btw.
Thanks in advance!Shockwave says at the present moment not to be compatible with OS X 10.9 Mavericks.
Youtube, QuickTime, all play with no sound at all. -
Performance issues after upgrading to 11g
hello,
We are facing a performance issue after upgrading from 10g to 11g.
as you can see, the tables named APPLSYS.FND_ENV_CONTEXT has grown to 15544880 records,
and oracle is using TABLE ACCESS FULL on it:
DELETE FND_ENV_CONTEXT E
WHERE NOT EXISTS
(SELECT 'X'
FROM FND_CONCURRENT_PROCESSES P
WHERE P.CONCURRENT_PROCESS_ID = E.CONCURRENT_PROCESS_ID)
AND ROWNUM < 10000;
Plan:
DELETE STATEMENT ALL_ROWSCost: 74,345
5 DELETE APPLSYS.FND_ENV_CONTEXT
4 COUNT STOPKEY
3 HASH JOIN RIGHT ANTI Cost: 74,345 Bytes: 3,108,980 Cardinality: 155,449
1 INDEX FULL SCAN INDEX (UNIQUE) APPLSYS.FND_CONCURRENT_PROCESSES_U1 Cost: 166 Bytes: 315,450 Cardinality: 63,090
2 TABLE ACCESS FULL TABLE APPLSYS.FND_ENV_CONTEXT Cost: 69,124 Bytes: 233,173,200 Cardinality: 15,544,880
select num_rows,last_analyzed from dba_tables where table_name='FND_ENV_CONTEXT'
15544880 07/07/2011 12:08:55
please advice.
OferPlease see these docs.
Table Fnd_env_context Growing Very Fast [ID 419990.1]
FND Related Tablespaces Growing at Rapid and Excessive Rate [ID 189800.1]
FNDCPPUR Request Does Not Always Delete Files From The File System, Many Files Will Be Denoted As "deletion failed" [ID 1335304.1]
Concurrent Processing - Best Practices for Performance for Concurrent Managers in E-Business Suite [ID 1057802.1]
Concurrent Processing - Purge Concurrent Request and/or Manager Data Program (FNDCPPUR) [ID 104282.1]
Thanks,
Hussein -
Another issue after upgrade to 9.0.2a beta
another issue after upgrade from 8.1.7 to 9.0.2a beta.
When I use "update-request", I need to specify a stylesheet. In that stylesheet, the following lines work before upgrade:
<row>
<fieldname1><![CDATA[<html><head></head><body>]]><xsl:value-of select="request/parameters/fieldname1/."/><![CDATA[</body></html>]]>
</fieldname1>
</row>
After upgrade, it doesn't work properly. What I see in the database field value is storing only
<html><head></head><body></body></html>
instead of storing
<html><head></head><body>fieldname1_value</body></html>
How can I get my result back?
Thanks in advance.Thanks Steve,
I've upgraded to 9.0.2.0B but find the following error:
Oracle XSQL Servlet Page Processor 9.0.2.0.0B (Beta)
XSQL-017: Unexpected Error Occurred
java.lang.NoClassDefFoundError: oracle/jdbc2/Clob
at oracle.xml.xsql.actions.XSQLUpdateRequestHandler.handleAction(XSQLUpdateRequestHandler.java:103)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:134)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:139)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:82)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:115)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:83)
at com.caucho.server.http.Invocation.service(Invocation.java:237)
at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:323)
at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:263)
at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
at java.lang.Thread.run(Thread.java:484)
Does it relates to the changes of usage of the "update-request" syntax?
Thanks in advance
Felix -
Stability issues after upgrade from 5 to 6.1?
Dear all,
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.
Many thanks in advance
Andreas"Andreas Raab" <[email protected]> wrote in message news:[email protected]..
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.Hi Andreas,
Normally proving that rumors are true is a responcibility of
rumors suppliers. Reverse does sound to me like a joke.
Regards,
Slava Imeshev
P.S. Current weblogic 6.1 is a stable product.
Maybe you are looking for
-
When I try to open some pictures in finder with preview I get a message that I do not have permission to open it. It tells me to go to file - info. Don't know what to do from there.
-
T code F-44 - Tab " Charge Off Diff " - Balancing field "Profit Center" in
Hi Gurus, Some vendor account has small CREDIT balances ( ignorable value line 0.50 paise, 0.15 paise ) which needs to be transferred to profit & loss account. Advised client to Use F-44 and tab "Charge Off Diff". While saving the entry, System thro
-
SAP NetWeaver 7.0 Java Trial Version (90 Days or 30 Days?)
Hi Experts, I downloaded the SAP NetWeaver 7.0 (2004s) for Java trial verion through the SAP Market Service almost a month ago, but I only have 6 days left until expiry. I thought I was good for 90 days or I have to renew it every 30 days? Please sug
-
Sun C 5.9 Build13_0 2006/01/06 fails to compile c stdint.h on IA-32
On GNU/LInux on IA-32 (Red Hat Enterprise Linux AS release 4 (Nahant Update 1)), c89 fails to compile a single-line test file with the line #include <stdint.h> "/usr/include/stdint.h", line 44: long long not allowed in Xc mode "/usr/include/stdint.h"
-
ITunes 64-bit installer for Acer windows 7
How to install iTunes 64-bit installer for Acer windows 7? I've been trying for many times but i still cant install it.