Illustrator CS5 Rotate Tool Anchor Point Bug

Summary:
I can reproduce this bug consistently, every single time. I am unable to set a new anchor point for the rotate tool in Illustrator CS5.
Steps to reproduce the bug:
1. Create a new shape, doesn't matter what
2. Press R or just select the rotate tool
3. Alt-Click to pick up the anchor point and drag to a new posiiton
4. Let the mouse go- at this point the anchor stays locked to the cursor even if I click and am only able to unlock it from the cursor if I click on a new tool, but without getting to choose a new anchor point.
Also I tried this with a Intuos 2 tablet and pen with the same results. I have an NVidia Quadro FX 3500 card installed with the latest driver as well.
I'm not sure if this issue is related, but also in After Effects CS5 if I press 0 to start doing a preview and then click away say on Firefox, then click back to After Effects, I am unable to click around inside After Effects to get the render to stop. It makes me wait until the whole comp is pushed into a ram preview before it unlocks itself.
Any ideas?

I too experience this problem and was hoping to find a solution. I've tried reverting to early Wacom Driver versions with no success. I find that if you "break the connection" between the pen and the tablet then the rotate point will drop and the rotate dialog will appear. I've found that this only works reliably when lifting the pen straight up off of the tablet til it loses signal. Not ideal for precision work. You'll notice that the rotate point drops when you move over to the menus, so I'm guessing it has something to do with the "drawing area."
My system specs for comparison.
Intuos 3
Windows 7 x64
Wacom driver v. 615-3a
Illustrator CS5 15.0.1
Nvidia GeForce 9800 GTX+ Driver Version 258.96
Core i7 920 Processor
12Gb DDR3 Ram

Similar Messages

Indesign CS5 Rotate Tool Anchor Point Bug

When rotating any object using either the rotate tool or 'Rotate 90 Clockwise/Anti Clockwise' the Anchor point defaults to the top left hand corner of the object frame. I would expect the Default Anchor point to be the center of any object that is placed on the work area.
Each time I want to rotate an object I have to move the ancor point to the centre of the object.
Is this a known issue?
Using CS5 with most recent updates on Intel Mac but also noticed same error on Win based systems in our office.
Thanks
Nathaniel

Ahh, I forgot to check that! Yes it has worked, although it's a little strange to be defaulted to top left point on all of our machines!
Thank you
Nathaniel

In illustrator my rotate tool is bending the image or type. How do I stop that?

In illustrator my rotate tool is bending the image or type. How do I stop that?

Somehow your image doesn't appear on the forum. You need to use the forum interface to upload it.

Brush tool anchor points are gone does some one now how to put them back?

Brush tool anchor points are gone does some one now how to put them back?

Press the H key to hide/show the anchor points. The brush tool needs to be active when you do this.

Illustrator CC Rotate Tool Problem

So I'm not sure if anyone else is experiencing this problem, but it seems I'm having issues with the accuracy of the rotate tool in Illustrator CC. When I rotate an object 90 degrees (either by entering in the rotate angle value or using the free rotate tool), the anchors no longer line up exactly. Here's a sample image showing what I'm referring to:
Note the red arrow pointing to the line not being straight. After I release the rotation (holding shift), it still isn't straight. Anyway, this is really starting to bug me. My software is up-to-date and I haven't seen Adobe release anything on this. Has anyone else noticed/encountered this? If so, does anyone know of a fix for it?

dj,
It does look rather strange: everything seems to be right, except for the two short not quite horizontal segments.
As far as I can see it rules out both an Align to Pixel Grid and a Constrain Angle issue.
With no clue, I have no clue whether the following may help.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Illustrator cc 2014 adds anchor points to guides

What is happening with illustrator CC 2014!!! I have placed a guide to know where to add a anchor point cliked on the add anchor point tool but when i select the object i want to add the anchor point to it adds an anchor point to the guide!!!! so i locked the guide thinking that this would solve the problem it then gives me a warning sign saying please use on a segment of the path it still thinks the guide is a path!!!

wozza,
Are you sure you are selecting the path, not the guid?
It may be time to look at the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Pen Tool/Anchor Point Help

I often draw/trace things using the Pen Tool. I start with an anchor point (A) then click to make another (B), then I drag the first handle away from the anchor point in order to make a bezier curve. The problem comes when I need to continue the path to another anchor point (C) after the curve. If I don't move the "dragged" handle, then it warps the continued path to the next anchor point (C). What I have been doing to remedy this frustration is switching to the Direct Selection Tool then moving the "dragged" handle over top of the previous anchor point (B). Please tell me there is an easier/faster way to do this...
Many thanks in advance!

Have you studied the manual?
Illustrator Help | Drawing with the Pen, Pencil, orFlare tool
There are also plenty of tutorials on how to use the pen tool.
If you know all this and still need help, please post a screenshot of the situation.

AE CS5 - Shape Layer - Anchor point moves after position keyframe

I am experiencing unintuitive (to me) behaviour with a brand new shape layer. Here are the steps to reproduce the issue. I have made a screen cap of the problem but can't figure out how to upload it to this forum.
1. In an existing composition, I create a new Shape Layer
2. By default the anchor point (center point) is in the dead center of the shape layer. Perfect.
3. I turn on Position keyframing, and add a position keyframe at my current time
4. Instantly the anchor point now jumps to the center of the composition, and so now when I scale my shape layer it doesn't scale properly
If I try to use the Pan Behind tool, I get position keyframing. Besides, I SHOULD NOT HAVE TO DO THIS, since the anchor point was in the correct spot to start with, and it's only because of this keyframing "bug" that the anchor point jumps.
What am I missing or doing wrong? How can I add a position keyframe to a BRAND NEW LAYER that has no other animation on it, and still keep the anchor point in the dead center of my shape?
Thanks for your advice,
Tom

Thanks to Rick and Mylenium for your helpful answers. Rick, I'd prefer not to have to manually reposition, because I'm never going to be as mathematically precise as the software for positioning the Anchor Point dead center.
Using the transform controls on the shape rather than the global container certainly did the trick! You guys are great. Thanks.
[rant]
In my defense as far as the constant exhortations to "RTFM", we all know that most veteran software users only go to the manual when there's a problem. You also know that Adobe's help system (particluarly in regards to search) has gotten worse over the years, not better. So when I run into a situation like this, I'm going to search through the help for what I believe the problem is: namely "anchor points", "transformations" and "keyframes", and maybe "shape layers". This is a fair amount of research, and it's exactly what I do as my first line of defense.
The second line of defense that most tech savvy folk do, is a Google search; for example: "anchor point moves after position keyframe" or "After Effects shapes layer anchor point moves keyframe" etc. And you spend your time sifting through forums trying to find the relevant answers. I feel that THAT is my true due diligence, rather than reading the F'n Adobe manual that is so very very sparse.
So after my due diligence, I turn to the experts communities, because there I know I will get educated, reliable help within a reasonable turnaround time. And because I myself contribute to these same forums in areas where I have higher than average expertise. The Adobe Forums have proven to be one of the great online resources.
Finally, now that I have a great answer from two knowledgeable experts (thanks again!), I've also enriched the community, because of the way I have crafted my post title, hopefully the next poor ******* who has a similar problem and a similar methodology to finding resolution will stubmle upon my post because I've tried to overload the title with relevant keywords that will generate hits in google.
Through my question, and your accurate answers, the global knowledgebase has improved.
So forgive me for not memorizing the F'n Adobe online help. I go to the resources that are the most useful, expedient, and provide the greatest value as a whole.
[/rant]
Peace,
Tom

Pen tool anchor points

Hello,
Is there a short cut on Mac or a way to add 1 handle to an anchor point that already has a handle - other than using the convert anchor tool?
When I use the convert anchor point tool, it resets the previous curve that I had already drawn, and I have to draw out the 2 handles to make the curve I had already made.
It would be much easier if one could just pull out 1 handle from an anchor point in order to tweak the curve or line.
Thanks

Here’s another trick if it is imperative to move only one handle:
With Smart Guides turned on, drag ruler guides to intersect at the handles.
With the Line tool draw a line between those intersections.
Scale that line with the scale tool and Shift held down. It will get longer at both ends.
Convert the line to a guide (Cmd/Ctrl+5).
Now you can drag one handle along the new guide and the opposite sector won’t move.

Basic 3d, how do I change rotation axis (anchor) point?

I have a photo in front of me. Now I'd like it to fall toward me, but when I spin the X axis, of course, the focal/center/axis point is the center of the photo. If it was falling toward you as if standing up on a table, the bottom of the photo would be the rotating point. I don't see a way to change this anchor point in the basic 3d filter - can it be done?
Thanks!

The easiest way I found to do this is the following:
Make the layer you want to rotate in 3D (the photo, in this case) a child/sublayer of a new, empty layer.
Apply the Basic 3D effect to this new, parent layer.
Select the photo sublayer and drag it until it's relative position regarding the axis sytstem/anchor point is the one you want. After that, when you animate the Basic 3D filter in the parent layer, the photo will behave as if the axis system was offset to the location you wanted.

Photoshop CS5 rotate tool not working.

I've just installed photoshop cs5 on a new matchbook pro, and I cannot use the rotate tool. When I try a window opens saying "Could not complete your request because it only works with OpenGL enabled document windows".

I already checked that, nothing in the graphics processor box is selectable. I can't think of why I would have this problem... I was using a cs6 trial and the rotate tool worked fine.

Adobe Illustrator CS5 Missing tools... Live bucket tool

Im missing the live paint bucket tool in illustrator CS5, PLEASE HELP! Look at the image below!

Next time you don't have to go to your Keyboard Shortcuts to find out where the different tools are. Some tools are hidden beneath others. Where you see a small arrow like thing (called a tear-away icon) at the bottom-right of a tool, it means there are other tools lying beneath it. Press & hold on a tool having a tear-away icon to reveal other tools. Eg.,

My illustrator cs5 eyedropper tool will not pick up any color! help!

I have been scrolling through this forum and google, and have not found an answer.
My Illustrator CS5 has been working all day, and I went away from it momentarily to pack some boxes for moving and the eye dropper tool started picking up colors that didn't exist in the placed image i'm grabbing from.
(clearly not black within that circle...)
I "found" a solution on this site where you go into your eyedropper options and make sure your appearance boxes are checked, and they weren't so I did that, and now the eyedropper tool won't pick up any color at all.
I have a project deadlines that require this program, and i've tried just about everything but re-installing.
Anybody have ANY solutions?
Here are the way my settings are now:
P.s. I'm not crazy tech saavy, so go explanation crazy if you'd like.

It's not live traced just vectored with the pencil tool!
I was trying to grab the individual pixel color from a jpeg, cmyk image to apply to the shapes drawn with the pencil tool.
I'm not sure what the problem was with the tool/program, but it seems to have fixed itself!
However, I appreciate your response anyways!

Illustrator CS5 no tools work except hand tool

Hi,
I've just installed the adobe illustrator CS5 on my mac os X Lion 10.7 and now when I open an .ai document or try to create a new one The only tool I can use is the hand tool. When I try to click on another one the hand comes back automatically when the mouse is on the document.

Yeah! I've turned on the acces for peripheral help.
Thanks a lot

Illustrator CS5.5 Tools Gone

Help! One of the students in my class has changed something on the computer and now Illustrator no longer has any Tools, Windows, Workspaces... I can't even reset them.
Thanks
Dave

Tab didn't work. I tried deleting the folder en_us from the Illustrator > Presets folder. That didn't help. Basically every option under the windows tab has disappeared.
Dave

Illustrator CS5 Rotate Tool Anchor Point Bug

Similar Messages

Maybe you are looking for