Illustrator cs6 "this file cannot be found" problem when open file from network

I used to install the trial version of Illustrator CC on my desktop and then when the trial run out I decide to go with illustrator CS6 instead, So I decide to buy &
install Illustrator CS6 on our desktop and everything seem to be fine except
the problem is our .ai file is located on the network shared drive of the design team,
When we try to open the file from the network drive with illustrator CS6, it said "This file cannot be found"
- we try to copy the file from network drive to our desktop and file can open without problem
- if we directly double click the file from the network drive to launch the illustrator CS6 with that file. It's also fine, no problem at all.
- but if we open the illustrator CS6 first and try open.. and then browse to that file on network, then "This file cannot be found" happen again.
- Illustrator CS6 have no problem open file in the local harddisk.
- Illustrator CC never have this problem open file in our network drive, try reinstall the Illustrator CC trial again and it can open without problem
- I try using Adobe CC Cleaner tool to remove everything before reinstall the Illustrator CS6, still no luck.
- Try remove the Adobe relate folder in user/user/Appdata and then reinstall, still no luck
- Try right click and open with --> Illustrator CS6 , yes if we double click the file directly it's ok, but as mentioned if we open illustrator first then browse for the file, the problem happen.
Did I miss anything to fix it ?

the same thing happend to me,
in my office the same folder with hebrew name, I can open files
on my laptop the same folder with hebrew name, I cannot open files.
I know its about the folder because when I put the files in a different folder, it open them.
how can I fix it without changing the names of my entire work folders?
there must be a different between my two computers.
thanks for your help

Similar Messages

TS1389 When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

Hello paddyrb154,
Thank you for the details of the issue you are experiencing with your purchased movie in iTunes on your iMac. It sounds like iTunes thinks the movie is on your computer, but it is not located in the iTunes Media folder.
For an issue like this, I recommend deleting the movie from iTunes and downloading it from the iTunes Store again. Use these steps to delete the movie:
Mac or PC
Launch iTunes.
From the Library pop-up menu, choose Movies.
Click Movies in the navigation bar.
Click the movie you want to delete.
Press the Delete key on your keyboard.
In iTunes 11, the movie cover art will remain visible, but a cloud icon will appear on it to allow you to download the item again (in countries that support this).
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Once you have deleted the movie, you can click on the cloud icon to download the movie again. If you do not see the cloud icon, use the steps in the section titled “Download previous purchases on Mac or PC ” in the following article to download the movie from your list of past purchases in the iTunes Store:
Download past purchases
http://support.apple.com/kb/ht2519
Thank you for using Apple Support Communities.
Best,
Sheila M.

"The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)

Getting error message as shown: "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)

Installs fine for me, so I'd guess you got an incomplete or corrupt download. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links and download a fresh copy of the installer.
tt2

I'm finding that songs that I have imported to Itunes are suddenly showing with "Exclamation" marks and Itunes tells me that the original file cannot be found. When I tell it to locate the file, it can't do it.

I'm finding that songs that I have imported into Itunes and played before are suddenly showing an"Exclamation" mark and Itunes tells me that the original file cannot be found. When I tell it to locate the file, it can't do it. I went to the Itunes help for locating files, but that still won't do it. It seems that somehow they are getting deleted, but not by me that I know of.
Can anyone help me?

Maybe you rename it. Somehow the path to the songs have changed if not deleted.
In Finder go to "Macintosh/Users/username/music/iTunes/iTunes Media/Music" that's where all your songs located so if those songs are not there you get an exclamation mark. You can delete those entries in iTunes and re-import again.

Original file cannot be found for most music files, w/large external drive

Hello.
I am getting the error message "original file cannot be found" most times that I play a song in iTunes 6, though I am always able to locate the music file in my iTunes Music Folder. This is infuriating!
My music collection is large -- 90.08 GB, and is on an external FireWire drive.
Can somebody help me?

mgallope,
welcome to Discussions.
Everytime you turn your ext hd off, iTunes reverts your library to its original location, which is within your mac HD.
In order to locate the music files, turn your ext hd on, plug it into your mac and wait it be recognized in Finder. After that, open iTunes Preferences>Advanced and change the location of your library from the original location to the new one. Wait until iTunes reorganizes the library and try playing any song.
Unfortunately, you´ll have to do this every time you shut your ext hd off.
Hope this helps.
Cheers,
Paulo

"The volume for "IMAGE.JPG" cannot be found" problem when importing images

This first started when I hooked up my card reader to my mac. I'd get the above image when I tried to import files off of it. My options are"
- Cancel - Find Photo… - OK -
OK = Nothing. It flashes and stays.
Find Photo = Navigating to the image, (all the others are grayed out except the one it says it can't find)
Cancel = This actually loads the image, but then the next image has the same issue. Forcing a quit seems to be the only way out.
I want to like apple but this stinks and is unusable.

This sometimes occurs if you’re importing a file into iPhoto and there’s already a file there with the same name. Digital cameras can produce many, many files with the same name over their lifetime, so it’s not uncommon to have several files called IMG_00543.JPG, for instance. Now you want to import one also called this.
What happens is that iPhoto compares the two files to check for duplicates. However, if iPhoto cannot find the file already in the database for comparison, then you get this message. It suggests that your database is damaged because iPhoto has lost track of this (or these) similarly named files.
A simple test is to rename the file you are importing - just add a character - IMG_00543a.JPG for instance. If this then imports with no issue then you might consider rebuilding your library:
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Trying to create multithreading problems when opening file dialog

Warning: Newbie to Labview...
I have a problem in a rather complicated VI where bringing up the open file dialog halts some background operations.
I would really like to reproduce this behaviour for various reasons, but am unable to. I've created a simple VI with a for-loop where the index feeds a sine converter which in turn feeds a tank indicator. This produces an oscillating behaviour. To this VI I've added a file dialog control.
Regardless of the multithreading setup, I'm unable to get the oscillating of the tank indicator to stop when the dialog is open. Is there something I can do to get this behaviour? I realize it's unusual to try to break things, but it is rather important for me.
Tha
nk you,
Nigel

Hi,
The for loop (all loops by the way) is halted until everything in it is
finished.
Try this:
+ Make a while loop
+ wire TRUE to the stop criterium.
+ Put an indicator on the 'I'.
+ Put a MS Wait in it (e.g. 80 ms), to prevent 100% processor time.
Run it, and the indicator will increase fast.
Now put any dialog in the while loop. E.g. a message box.
The indicator will increase everytime you press 'OK'.
Note: stop by pressing CTRL+. and clicking 'OK' several times.
Regards,
Wiebe.
"N Cook" wrote in message
news:[email protected]..
> Warning: Newbie to Labview...
>
> I have a problem in a rather complicated VI where bringing up the open
> file dialog halts some background operations.
>
> I would real
ly like to reproduce this behaviour for various reasons,
> but am unable to. I've created a simple VI with a for-loop where the
> index feeds a sine converter which in turn feeds a tank indicator.
> This produces an oscillating behaviour. To this VI I've added a file
> dialog control.
>
> Regardless of the multithreading setup, I'm unable to get the
> oscillating of the tank indicator to stop when the dialog is open. Is
> there something I can do to get this behaviour? I realize it's unusual
> to try to break things, but it is rather important for me.
>
> Thank you,
> Nigel

Problem when opening files

I need help. I have a new intel imac, which has been running very well. However, a month ago I noticed when opening a file it will take a number of seconds to show the contents. For example, I click on a file and the file window will pop up but the window will be empty for 6-8 seconds before the file contents will appear. It doesn't matter what I have in the file (docs, pdf, pics) file content is always slow to appear. Anyone have this happen? Anything suggestions on how to correct? Thanks.

You need to post to the [intel forum|http://discussions.apple.com/forum.jspa?forumID=1110], but have you tried resetting the PRAM?

On Illustrator CS6 (Mac OS) how can I keep an open file minimized when opening other files?

I work with several files at a time and it can become annoying when you open several files and a minimized file keeps opening after each one. I don't want to have it open in the background, I just want it to stay minimized until I'm ready to work with it.
Thanks in advance

Hi Lytle,
Let me clarify few more things here. There is an option Window>Arrange>Float in Window / Float All in Windows. You can use this option to float all your documents i.e. make them in separate document window. Now you can minimize these individual windows. But, when you open any more document your last active document window will come into focus. To avoid disturbing minimized state of other documents you can keep a blank document floating and before opening any document make it active and then open any new document. This is a kind of workaround to get rid of this issue.
Hope it helps!
Thanks!
Dhirendra

Logic Pro 7.2.3 - Pitch problem when opening audio from GarageBand 2.0.2.

Hi, I'm opening up a GarageBand file into Logic 7.2.3. All the synths open perfectly. However, the audio is pitched down as if it was recorded at a different resolution. I run Logic and GB in 44.1k, so I'm stumped. From the arrange window, if I double-click on the file and check it in the audio window that pops up, it plays back at the correct pitch. Any ideas what's going on?
Thanks!
Armen

I figured it out but thought I'd post the answer here in case others were having the same issue. I noticed to the upper left-hand corner of the arrange window that "Follow Tempo" box was checked. I unchecked it and the pitch is now correct.
The file default on my system opens up with the box checked .
Dual 1 GHz Mirror-door G4; 1.75 GB RAM Mac OS X (10.4.10) Logic 7.2.3, NI Komplete 4, Stylus RMX, blah blah blah

IPod cannot be updated...required file cannot be found

I have the latest iPod software and iTunes. When I plug my 5G ipod into my computer, after it transfers a few new songs, I get the following pop-up message:
"The iPod 'name of iPod' cannot be updated. The required file cannot be found."
When I click OK, it continues updating and seems to be fine. It is just an annoyance, becauce I can't just plug in my iPod and come back to a finished update.
Any tips? Thanks!
Windows XP

I have the latest iPod software and iTunes. When I
plug my 5G ipod into my computer, after it transfers
a few new songs, I get the following pop-up message:
"The iPod 'name of iPod' cannot be updated. The
required file cannot be found."
When I click OK, it continues updating and seems to
be fine. It is just an annoyance, becauce I can't
just plug in my iPod and come back to a finished
update.
Any tips? Thanks!
Windows XP
I am having this exact problem.
Though what will also happen after I click on "ok" the ipod will disconnect it self from itunes; it remains pluged in and the "do not disconnect" icon is shown on the screen, but it just stays like that from any where from 2-30 minutes. Eventually it will reconnect and start updating again untill the "The iPod 'name of iPod' cannot be updated. The required file cannot be found." message comes up and the whole prosses starts over again, this has made updating the ipod which I have already reset, quite a headache to update, the prosses has not yet been compleated as I cannot be at my computer for mor than a few hours at a time. I also reinstalled itunes to see if that would fix the problem it has not. Though before, I would also get the message "an unknown error has occured." now that dosen't seem to appear, so at least that is fixed.
Please help!

IPhoto says 'Files Cannot Be Found' when trying to import from SD Card

Hello all,
I have this stupid little problem with my iPhoto.
Every time I plug my SD card to import pictures I took from trips or whatnot to iPhoto, it says 'Files Cannot Be Found' but when all said and done, the files are actually there. I don't know what the problem is, but it's very annoying and I don't know how to fix it.
I highly doubt it's my camera setting and want to know if there's anything I can do within iPhoto to change that stupid little error message I get every time I try to import my photos.
For example, when I try to import like 40 pictures, at least 7-8 would alert me saying 'File Cannot Be Found'. I hit okay button and goes to next file... I have no idea what it is and it really kills me. Can anyone help?

This can occasionally happen, if iTunes cannot find your iTunes library. Do you keep your iTunes library on an external drive? Then check, if this drive is properly mounted. Does it appear on your desktop?
Sometimes simply rebooting will resolve problems with a drive that is not accessible. Also, check the settings for the location of your iTunes Media folder in the iTunes Preferences > Advanced panel:

Error: The iT Mus Lib cannot be saved. The required file cannot be found.

I'm getting this error repeatedly:
"The iTunes Music Library cannot be saved. The required file cannot be found"
I've reinstalled several times and even reformatted my computer. Still no luck. It was fine on an older version but this one just won't cooperate. I have to re add all files to the library each time I launch iTunes. arrrgh!
Please help =/

hi bpfriend!
i'm just doublechecking something here:
"The iTunes Music Library cannot be saved. The required file cannot be found"
is it saying file or folder?
incredibly rare (i've only seen it reported twice or thrice), but i have seen a message saying:
"The iTunes application could not be opened. The required folder cannot be found."
... with some earlier versions of itunes 6.0.x.
love, b

Hard drive crashed, files transferred BUT "files cannot be found"????

My hard drive crashed so I bought a new computer and used my actual i-pod to transfer my music files onto an updated version of I-tunes onto the new computer. All of the files showed up, but there are grey exclamation points next to almost all of the songs and a pop-up stating that "original files cannot be found". When I try to find them used edit/preferences/advanced I find where i-tunes has put a few of the files but the rest of them are missing??
I don't understand because I'm able to listen to the songs on my i-pod but I just can't "find them" when I use the actual computer. What happened??

Ejohan ,
Let me see if I've got this right,
1. You're using an unsupported "lite" version of a virus-prone OS, Windows ME to host iTunes.
2. You're not using any virus protection software.
3. You don't backup your system.
And you're mad at Apple because you lost your music? I hate to break this to you but it's your fault you lost your data not Apple's fault. You got exactly what you asked for based on your actions. You made the decision to cut corners and unfortunately you paid the price. Be an adult, admit it, make changes so that it doesn't happen again and move on the wiser for your experience.

I am trying to sync my iphoto events with my iphone, but when i do, it says the required file cannot be found.. how do i solve this problem?

i am trying to sync my iphoto events with my iphone, but when i do, it says the required file cannot be found.. how do i solve this problem?

Try erasing the iPod photo cache.
http://support.apple.com/kb/ts1314

Illustrator cs6 "this file cannot be found" problem when open file from network

Similar Messages

Maybe you are looking for