Illustrator doesn't show network locations

Illustrator doens't show my added network locations.
Trying to open files from Bridge (or from InDesign) into illustrator results into illustrator opening, but not the file.
The 32-bit version of illustrator does show the network locations.
Running windows 8.1 and Adobe Creative Suite 6

I did a total reinstall of adobe CS6, and it seems to be working fine now.
I had download Bridge CC from the Creative Cloud last time. I think that messed up my settings somehow.

Similar Messages

MB5B - Stock on posting date doesn't show Storage Location field

Hi All,
I run report MB5B - Stock on posting date with Stock Types = Storage Loc/Batch Stock, but the report doesn't show
Storage Location field in result.
How can I see it in this report?
Thank you very much for your kind support!
Cao Huy.

hi
what i think i sthis report is only for the OPENINGand CLOSING stock for the period or day
now whenu give SL field then system will only concider stock from that SL
the filed of SL will not be viewable in report as it is just opening and closing balance
regards
kunal

Lion doesn't show network disk in finder!

Hi guys, sometimes (mostly) Mac os X Lion doesn't show network disk (drive) in finder!!
System is:
MAC OS X LION 10.7.2
imac 27 inch i5
8 GB Memory
Thanks in advance.

Hi Carolyn... Thanks for the tip but I forgot to say that I'm expert user
I mean... I checked already and I and problem continue.
I solved the problem in this way.
Finder > Go > Connect Server > Network disk
But normally I have to see my disk under devices are in the finder.

Finder doesn't show network computer "Shared" in sidebar

I update 10.5.3 (05.28.08) and the Finder doesn't show all network computers at "SHARED" in sidebar except Windows PCs. I rebooted and seems fixed it.
now I can see all connected computers as 10.5.2,
but when I try to open a file from apps [command+o] (whatever apps is, I tried many as I can to check), again only shows PCs.
so I cannot access directly a file in other Mac on the network.
I tried put ~/Lib*/Preferences/com.apple.sidebarlists.plist in the trash once, log out/in.
still only PCs and of course deleted all personal shortcut icons are gone. so I replace it from trash can.
log out/in. then again now only PCs..... rebooted .....
any idea to fix it?
thanks

After adding a couple of macs to my network, I had the same problem. Part of the issue was turning on file sharing as suggested, but I also had issues with the firewall settings on the MAC. I had my firewall set only allow essential services because I didn't want to leave it open to all connections. I changed the setting to set access for specific services and applications. I added nmdb, configd, mDNSResponder, krb5kdc. These live in /usr/sbin.
Since making those changes, this problem seems to have stabilized and things are working as they should.
Hope this helps.

BB protect works but doesn't show the location

Hello I have installed BB Protect on my 9320. I have also switched on the GPS and the Wifi too. Enabled the Protect too. But when I log on to BB account, it doesn't show me the location of the device. It says unable to track the location. But everything shows fine in the Protect account on my laptop, like I can even see the current correct battery amount. So it means the device does connect with the account but why does it not show the location. What else can I do. I really need it to be working.
Please help. I will be very very very grateful to you. P.S.: I am with Mobilicity in Canada and the phone was purchased from Mobilicity too. Thank you.

Hi there,
There is an option during the setup of BlackBerry Protect that is required to enable this ability. To fix this, go into BlackBerry Protect on the device, press the BB Menu button and select Options, then make sure Location Reporting is turned on.
I hope that helps.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

GPS problem, my device doesn't show my location

Hi.
I have an ideatab a2107 tablet. Its android version is 4.0.3 and it says that it is up to date and doesn't need one!!!!
I have a problem with GPS on my tablet.
It doesn't find a location both in Google maps and in any other app like beetalk or viber, just search icon start blinking and can blinking for hours.
Reset didn't help.
Clean sky, and sunny weather didn't help neither.
please help me.

iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538
It's kind of hard to be more specific when you haven't told us a single thing about your computer or iTunes version.

Wicd Doesn't Show Networks

I just installed wicd, had it working and everything, and then after I restarted X and wicd, it said I wasn't connected. The internet still worked, though; firefox was fine and I was torrenting at about 60 Kbps. Then, after a reboot, the whole thing went. Also, hal failed during the boot process, but I don't see why -- the only changes I made to DAEMONS was adding wicd and removing networkmanager/dhcpdbd, as per the wiki. Here's my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="America/Chicago"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(snd_pcsp)
MODULES=(fglrx !pcspeaker !snd_pcsp)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Bender"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
wlan0="dhcp"
INTERFACES=(lo !eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
#ROUTES=(!gateway)
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(@syslog-ng pulseaudio hal !network !dhcdbd !networkmanager wicd netfs @crond alsa @openntpd)
#DAEMONS=(@syslog-ng !network pulseaudio hal dhcdbd networkmanager netfs @crond alsa @openntpd)
#DAEMONS=(syslog-ng network netfs crond)
Edit: I should also mention that, not only is wicd not connecting, but also that no networks are showing up.
Last edited by Buce (2009-03-20 07:29:50)

Figured it out. For anyone else switching from networkmanager to wicd, make you don't uninstall wireless_tools when you remove networkmanager (or reinstall it if you do).

[Solved] Conky doesn't show network speed

Hello Archers!
I have my old conky config with net speed indication which worked in past but stopped working this installation. My user is in “network” group and I have
${font monospace:bold:size=10}NETWORK ${hr 2}
${font monospace:normal:size=10}Download: ${alignr}${downspeedf eth0} KB/s
Upload: ${alignr}${upspeedf eth0} KB/s
in my ~/.conkyrc file. It used to show speed in KB/s but now just zeros, all the time. What would be the reason for this malfunction?
Last edited by Mr. Alex (2013-07-28 09:27:41)

Mr. Alex wrote:
jasonwryan wrote:it isn't the smartest thing to post here...
Yeah, I know Arch maintainers don't accept criticism anymore. But mine wasn't even obvious and yet you pointed that out and called it “not the smartest thing to post here”. Totalitarian regime inside of a distro. Free speech is forbidden. Arch Linux, ladies and gentlemen!
Read the Etiquette. Your histrionics are as unfounded as your original slur. If you had even the slightest clue of what a totalitarian regime actually involved, you would be ashamed of yourself for that association.
Don't post here again unless you are prepared to accept responsibility for your own incompetence.
Closing

K8N Neo3 nForce 4-4X doesn't show network utilization for some reason

Has anyone had this problem? If I am downloading something and I check the Windows Task Manager the networking tab shows no activity for some reason. I figure this is probably a known problem, but I haven't seen anything on it yet.

Quote from: clappi77 on 29-May-06, 02:37:57
I figure this is probably a known problem, but I haven't seen anything on it yet.
Nope

IPhone 5 is in lost mode but doesn't show last known location

HI there. My iPhone 5 was stolen a couple of weeks ago and it finally got put into Lost mode today. The problem is that it doesn't show the last known location of the phone! I thought it had to since it had to connect to get online to get put in Lost mode and to show location? Any help?

Hello townout
It all depends on the situation, but if it entered into Lost Mode for only a brief moment, then your iPhone may have gone offline after that and will not show a location. The phone would still need to be connected to either a cellular network or Wi-Fi network to be tracked.
iCloud: Use Lost Mode
http://support.apple.com/kb/PH2700
Regards,
-Norm G.

Network Location not showing domain name in Server 2012 R2 after demoting 2003 PDC

The single active NIC in my new Server 2012 R2 no longer shows the Network Location of "DOMAIN.LOCAL" like it did before I demoted the only Server 2003 domain controller. The NIC now shows "NETWORK" as the Network Location.
The registry still shows a Profile with the correct PROFILENAME in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles
but that name does not show up in the Network List Manager Policies inside Local Security Policy.
The 2012 R2 Srv has all of the FSMO roles, Client PC's can connect to the domain but will not get new map drives from a script, they must be created manually. My Quickbooks Enterprise clients cannot see the QB Server Manager on this server and I think it
is related to this issue because of firewall restrictions.
The Windows Firewall pointed me in this direction because the "Private Networks" is connected to my NIC named "Network" but the Firewall "Domain Networks" is reported as "Not connected."
Any Help is appreciated,
CrazyDog

Hi,
Based on my research,
Network Location Awareness (NLA) service expects to be able to enumerate the
domain’s forest name to choose the right network profile for the connection. The service does this by calling
DsGetDcName on the forest root name and issuing an LDAP query on UDP port 389 to a root Domain Controller.
If something hinders the DNS name resolution or the connection attempt to the DC, NLA is not able to set the appropriate network profile on the connection.
Therefore, I suggest you check the DNS settings on DCs and other domain-joined machines, which should point to the existing DC as preferred DNS server, and secondary DC as alternate DNS server, IP address of demoted DC should be
removed. In addition, please do not use loopback IP address.
Here are some articles below I suggest you refer to:
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
Network Location Awareness
http://technet.microsoft.com/en-us/library/cc753545(v=WS.10).aspx
Complete Step by Step to Remove an Orphaned Domain controller
http://msmvps.com/blogs/acefekay/archive/2010/10/05/complete-step-by-step-to-remove-an-orphaned-domain-controller.aspx
Best Regards.
Amy

Network users doesn't show up on snow leopard client

Hello,
I am having a weird problem with my snow leopard client that won't show a list of the network users.
The server is a open directory server and other snow leopard client can show the list of the network users on login screen except one. I've tried different connections via ethernet or via wireless. (I have 2 client set up at the moment, they are exactly the same clone, client #1 show the list of network user but not client #2).
client #2 will immediately recognize the network accounts are available upon start-up but won't show the list. The computers are added to workgroup manager's computer list and is managed but if the network list doesn't show up on the client that makes the client un-managed.
Could anyone kindly give me advise please?
Thanks!
Sumomo

Hi
+". . . they are exactly the same clone . . ."+
This might be where your problem begins and ends? If you joined client # 1 to OD and then cloned this to create client # 2 then you're probably going to have the problems you're seeing?
If you want all your workstations to be the same it's best to remove any references to any LDAP Server as well as any TGTs. It's also a good idea to give each client workstation unique names prior to joining an LDAP Directory after they've been imaged. You can create a NetBoot Image with an associated workflow that will define unique names as well as join an LDAP Directory as Post Install actions.
The above assumes you actually meant to post in the appropriate Snow Leopard Forum rather than the 10.4 one? Perhaps you should have posted here:
http://discussions.apple.com/forum.jspa?forumID=1349
HTH?
Tony

Metadata conflict: Doesn't show location data

Hello there,
I imported some pictures to Lightroom and edited them there normally. After closing lightroom I edited the location information via GeoSetter (www.geosetter.de). Looking at the images via ACDSee, I see correctly entered City, Sublocation, Procince, Country Code and Country Name in the IPTC data.
Firing up Lightroom 2, I do not see these metadata changes, location fields are all empty. So I click on Synchronize folder and synchronize Metadata. Lightroom now gives all images a Metadata status of "Has been changed". When I click on "Resolve conflict", the location data still is not shown, but actually the location data is deleted when looking at the image again via GeoSetter (or ACDSee) - basically the Lightroom-state-of-things (no locationdata) has been restored I guess. Ok, moving on.
I go back to GeoSetter and reset the location to where it should be, click on synchronize metadata in Lightroom again and the Metadata status is "up to date" - no "resolve conflict" possible, the problem now is:
The location data is STILL in the IPTC fields, Lightroom doesn't show it though, location fields are empty and stay empty even after synchronizing, or Lightroom deletes it as previously stated.
What is the correct way to edit metadata externally and how to tell Lightroom to resolve the metadata conflict by ACCEPTING the external changes and not reverting to the status quo?
Sincerely,
Dennis

>will this method not revert any prior changes made to the images? (e.g. Crop, Keywords, Local Adjustments).
It will, which as you have already figured out, isn't a good idea.
I don't know anything about Geosetter, but my guess is that it's writing the data back into the original photos. Unfortunately, Lightroom doesn't see these changes when Sync folder command is used because it's looking for a Metadata Change date, which is normally stored in XMP. There is a workaround though.
You haven't mentioned the type of files that you're working with, but I'll assume they're raw. If so the workaround is to use the Lr "Save Metadata to file" command before working on them with the external application (Geosetter). This will create an XMP file for each photo that contains all your existing metadata plus any Develop adjustments. Now you can save the new IPTC back to the files using Geosetter. Once that part is completed you can use the "Read Metadata from file" command knowing that all your original Lr metadata and develop adjustments will be copied back along with the new IPTC info.
Above also works with JPEG and TIFF files

I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network?????? Please help!!!!!

I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network?????? Please help!!!!!

If the HD is setup for Mac and plugged into the AE.. with file sharing on, it should work.
Try manually mounting the disk.
In finder use go, connect to server, and type in AFP://AEName or AFP://AEIPaddress.. where you replace what I wrote with the actual name or actual IP.
Later versions of Mac OS.. like ML for some strange reason have their preferences set by default to not show network drives.. change finder preference to see everything.

New 2t Time Capsule shuts down: light is off, doesn't show up in network

2T Time Capsule completely shuts down: no activity light at all, doesn't show up in network registry, and is cold to the touch.
If I unplug and replug, it will work again, but will eventually shut down again.
Is this a problem with a sleep proxy service?
This unit is less than a week old.
I appreciate the help.

The internal power supply on the Time Capsule is defective. Soon, the Time Capsule will not turn on at all.
Please contact Apple for a replacement Time Capsule as soon as possible.

Illustrator doesn't show network locations

Similar Messages

Maybe you are looking for