Illustrator Entry Point Error

Illustrator CS 6. All other application work as always did. Illustrator, however, displays an entry point error that wasn't solved after de-installing and re-installing the whole suite and cleaning the registry using adobe's application for that purpose. What happened is that my disk crashed and all applications had to be re-installed. Illustrator, however, displays this message and quits.
This is my system: Dell 8700, Windows 8.1, plenty of memory.
IF any one knows, please, help.

Metaphysically speaking, you are right. Technically, a browser and Illustrator CS6, are two complex beasts that don't breed together and don't even try to cross pollinate each other if only to multiply their complexity factor, which I can only imagine, since they work independently.
As far as my system, this is a plain one, although I don't take it as totally innocent.
Thanks, anyway, for elevating a simple bug to a dignified philosophical consideration.

Similar Messages

Entry point error while installing SAP GUI 7.20 compilation 3

Hi Experts,
I couldn't install SAP GUI 7.20 compilation 3 in my PC, I used SAP GUI in my PC a year ago but later I formatted my disk. Now when I click on SAPGUISETP it is throwing the following error
The Procedure entry point ?FeiDbgException@@YAXVCWin32Exception@@@Z could not be located in teh
dynamic link library NwSapFeiLg.dll
Can anyone please advise?
NB P.s: Initially it mentioned the dll files NWSAPFEIUT.dll & NwSapFeiLg.dll were missing just now I copied them to System & System32 folders. But even though it is showing this entry point error. Also i have done a clean boot and tried installing it but in vain.

Hi
Please can you check the version of nwsapfeilg.dll in C:\Program Files\SAP\SapSetup\setup
The issue was caused by a version conflict. nwsapfeilg.dll.
Complete Installation SAP GUI 720 + Frontend
http://wiki.sdn.sap.com/wiki/x/CIENDw
Please check if this solves the issue.
Regards,
Naveen.

NIPALU.dll entry point error message when launching application

A previously working application (written in VB6.0, using Measurement Studio 6 and NI-IMAQ1394) now has a fatal error message when starting:
"The procedure entry point _pkgModulePackageEventLog@20 could not be located in the dynamic link library NIPALU.dll".
This fatal error is only observed on some of our customers' systems, others work fine after the upgrade. WE NEED URGENT HELP!
Attachments:
Error Message Screen Shot.png ‏8 KB

MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
Hello,
It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
Microsoft® SQL Server® 2012 SP2 Feature Pack =>
ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
Olaf Helper
[ Blog] [ Xing] [ MVP]

I downloaded iTunes onto my laptop and kept getting an Apple Application error so I also downloaded that and now I'm getting a Procedure Entry Point error as well as Error 7 (Windows Error 127) and I have no clue what to do. Can anyone help me?

I downloaded iTunes onto my laptop and was getting an Apple Application Support error so I downloaded that and now I'm getting a Procedure Entry Point and Error 7 (Windows Error 127) messages. I have no clue how to go about fixing whatever the problem is...can anyone help me?

iTunes.exe - Entry Point Not Found
The procedure entry point
AVCFAssetCreatWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Entry Point Error when starting WL

Hello,
I am runnning WL 5.1 on Windowa NT. When I start WL as a NT service a got this error:
WLService - Entry Point Not Found
The procedure entry point ResolveClass could not be located in the dynamic link library javai.dll
Despite this error, I got to start WL. But I would to know if this behavior affect my WL, if so how ?
Thanks in advance.
Francisco Manzo

Tshifhiwa,
Back again? Nothing learned?
No jdev version?
You should n^know by now that you have to give at least some basic information.
A description of what you tried to do outside the listing would help too.
Timo

Premiere Elements 7 Entry point error

Hello Team,
In trying to start (Adobe Premier Elements 7) I keep getting the following error message;
"The Procedure Entry Point FileInfoinitializerFileinfoLibrary with BIB could not be located in dynamic Link Library"
Can anyone help? I recently had this program on my C Drive and recently unistalled it and move to my external drive for
space purposes. Once I moved it to my External drive, it began to give this message.
PLease help!!!

I agree with John on this. You can use your external for your media, and/or your Projects and Scratch Disks, but you want the program on your C:\.
Note: if you do use your external for your media files, and/or your Project files, you WILL want to set the drive letter to a constant in the OS of your computer, and to the same drive letter in any computer, where you might wish to "transport" your external to.
Otherwise, when you plug in the external, you might get a different drive letter and then have to manually locate your assets for PE. That is a lot of unnecessary work. I transport my Projects between the laptop and the workstation, and each one has a permanent drive letter assignment, that matches in the OS of each computer.
Good luck,
Hunt

How do you fix entry point error sqlite3_wal_checkpoint

HI All,
I just downloaded the "lastest" PUSH (iOS (iPAD/iPhone), Quicktime, iTunes upgrades for Windows 7 (x64) from Apple, and upon reboot (required) I was greeted with the following error msg.:
"The procedure entry point SQLite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
How do you FIX this????
Thanks in advance for your help in resolving this matter.
Regards   Jeff

HI B Noir,
No that did not help.   I did copy the SQLite3.dll to the: Program Files(x86)/common files/Apple/Mobile Device Support folder and that got rid of that error.   It appears that this is an ongoing issue with iTunes on Windows machines. I'm starting to remember that I had to do this for the last update, fouond the fix in another forum dated in 2010.
2 other issues also occur:
1. Can't backup to the computer, only to the icloud. When I change it in itunes it reverts back to the icloud, and will not backup to the computer.
2. The "category list" in the radio on itunes refreshes forever, and no station appear under any category.
Thanks for trying.
Regards   Jeff

CS4 Entry Point Error

Hi.
I'm running WinXP SP3. I just upgraded from CS2 to CS4 (and yes, I installed the update. I'm currently running 11.0.1). Whenever I load photoshop, just as it is about to finish "Initializing panels..." an error box pops up saying: "Adobe Photoshop CS4: Photoshop.exe - Entry Point Not Found" "The procedure entry point IsThreadDesktopComposited could not be located in the dynamic link library USER32.dll." After the box pops up I press the "Okay" button (that's the only one there) and it then opens Photoshop - which works perfectly. No other errors, no missing functions, no lag. Still, it's become quite annoying to start the program like this everytime and I'm pretty sure getting an error during start up is a good indication that not everything is 100%. Does anyone have any suggestions about what I should do? I attached a picture of what I get in case I wasn't able to describe my problem clearly.
--jenn

On a Windows XP-based computer with Family Safety installed, you receive an error message: “The procedure entry point IsThreadDesktopComposited could not be located in the dynamic link library USER32.dll” - http://support.microsoft.com/kb/969155 This issue occurs when the dwmapi.dll has been installed in the Windows\System32 folder. Note: dwmapi.dll is a Windows Vista file that may have been installed by another application. Just rename it to dwmapi.dll.bak and the error goes away. I hope this helps. It worked for me.

Flash Professional CS5 Entry Point Error

Hi, I installed CS5 Web Premium Student & Teacher Edition on my home computer running vista home premium x64bit with well over the minimum system requirements, all the programs run correctly except Flash Professional CS5.
This error appears and the programme does not start up.
“ The procedure entry point ?ik_treeIsActive@CFlashIK@@QAE_NJ@Z could not be located in the dynamic link library FlashIK.dll.”
I have tried uninstall and re-install as well as the Adobe Creative Suite Cleaner Tool . I have installed the same package on my laptop and it works fine but need Flash on my home computer, how can I fix this??

Ask on the Flash forum. This is a program specific error.
Mylenium

Getting Kernel32.dll procedure entry point errors when trying to load NI-IMAQ v2.6.1

Here is a copy of what appears in the Error Log:
Application popup: setup.exe - Entry Point Not Found : The procedure entry point GlobalGindAtomA could not be located in the dynamic link library KERNEL32.dll.
I have also recieved the following:
Application popup: autorun.exe - Entry Point Not Found : The procedure entry point TerminatePsocess could not be located in the dynamic link library KERNEL32.dll.
and:
Application popup: autorun.exe - Entry Point Not Found : The procedure entry point IsCadReadPtr could not be located in the dynamic link library KERNEL32.dll.
FYI - software loaded onto a IDENTICAL machine (hardware) w/o difficulty.

Is the other machine "IDENTICAL" in terms of operating system, software, etc? Does the error occur when trying to acquire an image in Measurement & Automation Explorer (MAX), as well as in your programming environment? Have you tried reinstalling the NI-IMAQ driver? Has this system always exhibited this problem, or are these errors a new phenomenon?
Best regards,
Dawna P.
Applications Engineer
National Instruments

Entry point error on windows vista

I'm getting an "iTunes.exe Entry Point Not Found" message. Im running on Windows Vista and i don't understand how to fix my problem. I reinstalled iTunes and still no fix. Please help. Thank you!

welll about that link u gave
i reinstall 11g again today and i open up the em
but the mertric its telling me to edit is not visible
so i searched for this http://download.oracle.com/docs/html/B15719_02/toc.htm#CIAIDJJI
Network Utilization Metrics Not Displayed
The Oracle Enterprise Manager Grid Control or Database Control should display the following network utilization metrics for each network interface:
Network Interface Combined Utilization (%)
Network Interface Read Utilization (%)
Network Interface Write Utilization (%)
If these metrics are not displayed for a particular network interface, create the $ORACLE_HOME/sysman/config/network_speed file and enter the network interface name and speed in the file as follows. In this example, interface is the network interface name and speed is the speed of the interface in megabits per second (Mbps):
interface_name speed
For example, if the eth0 network interface does not display metrics, create the $ORACLE_HOME/sysman/config/network_speed file and enter the following, where 100 is the network speed in Mbps:
eth0 100
but i am not getting what i have to do
can u help with this
Edited by: Juhi on 26-Apr-2010 23:37
Edited by: Juhi on 26-Apr-2010 23:40

Illustrator not start - Entry point not found error illustrator.exe

use illustrator of a part of master collection. all other programms of mc works fine, but illustrator don't work, not the 32bit and not the 64bit. (Win8.1 pro).
tread with same content but no answer: Entry Point error in Illustrator

Hi Daryl,
POWRPROF.dll is a Windows file that Illustrator uses. It be that this file is damaged or because of an issue with the registry on the computer.
I would first try uninstalling (Control Panel > Programs & Features) and reinstalling Illustrator and see if that makes any difference. If it doesn't that file might have been corrupted and you may need to replace the current version with a version from the Windows 7 installation media.
http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/error-message-the-pr ocedure-entry-point/93638cb7-cda5-4cac-8c23-d9884653d2a9?auth=1
-Dave

Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" Error 7.....Help, please??

Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??

Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams stop

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working". Help!

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Illustrator Entry Point Error

Similar Messages

Maybe you are looking for