Illustrator fails to open URGENT HELP

Whenever I go to open Illustrator CS5 Extended, I get this message: http://i52.tinypic.com/16m6ow6.png I went to these forums before and I looked at a similar issue, and they said to get the Cleaner Tool or something so I did, but it said I need to unistall the product. I went to go uninstall the product but this message came up: http://i51.tinypic.com/2emcsjc.png I've reinstalled the product twice now and it begins to work the first time I open it, but then starts this whole error message over again. If there's even a number I can call to help me with this, that's be great. I'm a graphic designer and I urgently need my Illustrator to get my job done. Thank you in advance.
:Run on W7, Asus Laptop

Nobody can say anything without some exact system info.
Mylenium

Similar Messages

Illustrator Crashing Upon Opening - Urgent Help Required.

Hello, i recently installed Illustrator CS4 on my Windows XP (SP2)
It worked fine for the first week or so, but now every time i go to open it, it opens so that i can see the various toolbars and such, then closes entirely. I do not see any crash report or similar reports.
I have tried removing every font off my computer besides the ones that the computer needs and running illustrator, this has also yielded the same disappointing result. I have also tried running the Adobe CS4 clean script and reinstalling illustrator, this also leads to the same result.
Help would be greatly appreciated as i need this for masssive design jobs that i have at the moment, with deadlines approaching quite soon.
Thanks,
Chris.

Jane,
When it is not something in the Adobe Illustrator CS4 (or whatever) Settings folder, it may be (with tests):
1. Corrupt font(s): you may move all fonts out of the Windows fonts folder (and move them back in);
2. Firewall interference (especially if more than one is running (XP SP2 adds one if activated)): you may turn them off (and on again);
3. Some versions of Acrobat generate many temp files. Too many (64K) causes the problem: you may search and destroy Temp files;
4. Some other inconsistency caused by Adobe Acrobat/Reader: you may try uninstalling and reinstalling (a newer version).
5. Incompatible/old printer definition file for the default printer: you may upgrade the driver, change the default, or set the PostScript driver/PDF to default;
6. Using a US/English version of Illustrator with Windows set to a different language: you may enter Control Panel>Regional and Language Setteings and change to English (and change back).
7. Quicktime/iTunes: uninstall Quicktime and make sure the Quicktime folder is deleted in the Program Files folder; and/or uninstall iTunes.
If neither of these possible solutions work, have you made any (other) changes to the PC between succes and failure? New software loaded?

Updating to MAXDB 7.5.00.29- user logon failed error! Urgent Help

Hi
I am trying to update MaxDB 7.5.00 to MaxDB 7.5.00.29
on WAS 6.40. When I run the update via SDBUPD, I get the error "cannot establish database instance". i have looked in the log files(MaxDBUpdate_install-16.07.2005-16.13.log)
and the error is
user_logon failed
ERR
-24950,ERR_USRFAIL: user authorization failed
I am following "MaxDB update SAP note 735598" and under Windows section it states I should call the SDBUPD from the cmd prompt as follows:
SDBUPD -d <database_name> -u <dbm_userid>,<password>
so i run
SDBUPD -d J2E -u Administrator,portal
I assume <dbm_userid> is the default userid which is Admisitrator when installing WAS and MAXDB. I ahve not changed the default during the installation.
I have tried SAPJ2EDB as dmb_userid as well as J2EE_Admin, they still give the same error.
Any help on this?
Need urgent help
Much appreciated
RD
Message was edited by: RD

Hi
Thank you for your reply!!
I used control,control as user,password. This worked 100%, but then it reached to a point where it gave this error, i get this from the log file:
STDERR: test pgm/sqltcp.dll failed: cannot extract pgm/sqltcp.dll: sharing violation during open of existing file
What causes this error, and how can i get pass this ?
I assume some instance is started, but before I ran the SDBUPD, I stopped the J2E under sap system in SAPMMC.
Below is the output it gave when i ran SDBUPD from cmd prompt, I have bolded where the error starts:
D:\UpdatesPatches\MaxDB\maxdb-server-win-32bit-i386-7_5_00_29>SDBUPD -d J2E -u control,control
MaxDB INSTANCE UPDATE
starting installation Mo, Jul 18, 2005 at 08:57:11
operating system: Windows I386 NT 5.2 Service Pack 1
callers working directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7
500_29
installer directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7_5_00_
29
archive directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7_5_00_29
beginning to check sap db instances
start new instance update
finding instance type...
finding starting release...
finding migration strategy...
looking for running instances...
checking paramfile modifications...
looking for domain user...
checking data consistency for database migration...
switch database state to OFFLINE
checking SAP DB instance "J2E" successfully Mo, Jul 18, 2005 at 08:57:23
starting preparing phase of package Base 7.5.00.29 32 bit
update release check... ok
update binary magic check... ok
checking interferences to other packages... ok
collecting data finished:
independent data path: d:/sapdb/data
independent program path: d:/sapdb/programs
start extraction test run of "D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i38
6-7_5_00_29/SDBBAS.TGZ"
test pgm/sqltcp.dll failed: cannot extract pgm/sqltcp.dll: sharing violation dur
ing open of existing file
following programs are running:
dbmsrv.exe [pid = 876]
dbmsrv.exe [pid = 2496]
dbmsrv.exe [pid = 1460]
wahttp.exe [pid = 1420]
dbmsrv.exe [pid = 1188]

"failed to open document" help

I have been working on a flash file for school using CS5.5. Everything was working, and I even downloaded a trial of CS5.5 on my computer to work on the project, but now I am in class and it will not open. It keeps saying "failed to open document." I'm not sure what went wrong, and I need this file by next thursday for my class. I need to know if there is any way to fix this without redoing my entire project from scratch.

thank you! I'll let you know if it worked!
the only problem is that none of my tweens and actions are correct.

Photoshop CC2014 failed to open correctly, HELP!

I have an assignment due on Friday using Photoshop CC2014 which I just bought from Adobe. Every time I open it, a popup says that is has failed to open correctly and a program is stopping it from opening correctly and closes it down. I have tried reinstalling and updating my laptop. It still will not open correctly. I have a dell Windows 8 laptop and I just updated it to 8.1 version. Please let me know as soon as possible if you have any ideas how to fix my problem. Thank you,

Hi tayloranndag,
Moving the discussion to Photoshop forum.
You can try resetting the preference from the following link.
http://helpx.adobe.com/photoshop/using/preferences.html
Thanks,
Atul Saini

Iphoto & illustrator failing to open

Recently iphoto, illustrator 10 and some webpages will unexpectedly quit before the programmes even opened, the icon bounces and starts to load but then dies without reason. Ive tried disk utlity recover permissions but that did not work.
I really need the problem resolved quickly so any help would be great.

Have you tried removing the preference files? They could have become corrupted. If not, try the following:
Open up your home directory then Library -> Prefrences. In that folder look for files such as:
com.apple.adobe...
and move those files to the Desktop. Then try starting the applications again. If you have any settings saved in these apps they will be lost, but can be reset manually. Also, adobe puts a bunch of preference files into your Preference folder, it may be that not all of them are corrupt, you're welcome to try and take them out one at a time and try to determine if one of them is bad, or just take the lot out. HTH.
-NifflerX

Illustrator fails to open

I've just installed CS6 and all the other apps work except for Illustrator. I've reinstalled, and reset preferences pressing comm-opt-sft while opening app but nothing is working. help...

Nobody can say anything without some exact system info.
Mylenium

Adobe Media Encoder fails to open (URGENT!)

when I try exporting my material in premiere pro, it opens AME and then it crashes, every time. If this is a common error, can someone plz help me? I haver INCREDIBLY little amount of time.
What I am editing is to be published tomorrow for a promo at a website, and it NEEDS to be finished.
Please help me~

>my laptop crashed and I got this really fancy blue screen
That is a sure sign of driver problems.
Some troubleshooting tips.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

IReader installed but wont open Urgent help needed please!

I have installed Acrobat Reader X.
When i try to open files I get a problem saying Microsoft and Adobe have encountered a problem and need to close.
I get an option to Debug, Send error report or Dont send.
The information which comes up when I look for more information is the following::
error signature
Appname. Acrord32.exe. Appver 10.0.1.434 Modname acrord32.dll
Modver 10.0.1.434 offset 001869666
It was previously working then the next time I came to use it I got this.
Desparately need help

1. camera loading - have you tried updating or reinstalling your firmware?
2. keyboard - define strange
3. slow - how much is phone memory and what apps are running in background (see taskmanager, hold menu key until it shows)? turn off theme animations. it helps.
4. handwriting - have you set the handwriting recognition to recognize your particular penmanship? Go to menu>settings>phone>touch input. Set writing speed to very fast, calibrate your screen and take handwriting training so the phone will recognize your handwriting.
5. qwerty - what things? how so? have you set it to qwerty?
6. cannot scroll in file manager - its not a problem. Thats normal for the OS. Use Nokia Photobrowser or the Gallery for viewing pictures. File manager is for managing files, not viewing them.
7. Motion sensors - read #3
8. Phone feels hot - how hot? Batteries heat up when charged. Its normal. However it depends on how hot exactly.
9. Depends maybe on how long the video is. My 5800 feels hot when watching an entire movie. Also this would be reflected on #3 as well, as the phone may be working overtime.
10. Music when unplug headset - Its normal for almost all Nokia phones (heck even some other brands this is normal), try to use an alternative player if you like
11. Back cover - Its the design
12. Yotube - use youtube app
13. Use Nokia Photo Browser download from ovi store. It shows pics only and looks real cool. Anyway, you can put all your videos in the gallery into a virtual folder so that it is separate. Its the way the gallery is designed, to show both pics and video. As you can see, it is written Images and Videos, so they're supposed to be together in there.
14. Adobe still hasnt caughtup its mobile solutions for its PC solutions. Its their fault not Nokia's or anyone else's.
15. Depends on extension. Built in office reader only reads .doc, not .docx.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Vm Servers failing to start - Urgent HELP

Hi
I have suddenly found I cannot start any of my vm`s on our Oracle 3.0.3 vm server setup. If I stop any running vm`s I then get the following error on trying to start them.
Its the weekend and im trying to do some work while the office is emtpy and am now totally stuck and in trouble.
Also I do have a CSI (ordered 3 days ago) but aparently is not active (just called help line) and they cannot find any record of it. Something about takes 36 hours and I need to receive a welcome letter? As its the weekend (sun) I will have to wait until next week.
We currently have two vm hosts running for last few months without any problems. I did add on Friday a third host server but cannot really see how this could have affected it.
Error on starting vm`s follows
Any help/response would be nice
Nick Colyer
Job Construction Phase
begin()
Appended operation 'Virtual Machine Start' to object '0004fb00000600004582721d06a8ab47 (scripts.ex)'.
Appended operation 'Network Port Configure' to object 'network.EthernetPort (2) in 53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc with MAC 00:25:90:38:dc:bf (network.EthernetPort (2) in ovm2.ex)'.
Appended operation 'VM Set HA' to object '0004fb00000600004582721d06a8ab47 (scripts.ex)'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (IN_USE): [EthernetPort] network.EthernetPort (2) in 53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc with MAC 00:25:90:38:dc:bf (network.EthernetPort (2) in ovm2.ex)
Operation: Network Port Configure
Object (IN_USE): [VmDiskMapping] 0004fb0000130000f945246fe9077021
Object (IN_USE): [VirtualMachine] 0004fb00000600004582721d06a8ab47 (scripts.ex)
Operation: Virtual Machine Start
Operation: VM Set HA
Object (IN_USE): [VirtualDisk] scripts.img
Object (IN_USE): [Vnic] 0004fb0000070000dc0557c1dac9a1b8 (00:21:f6:33:00:10)
Job Running Phase at 10:12 on Sun, Apr 15, 2012
Job Participants: [53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc (ovm2.ex)]
Actioner
Starting operation 'Network Port Configure' on object 'network.EthernetPort (2) in 53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc with MAC 00:25:90:38:dc:bf (network.EthernetPort (2) in ovm2.ex)'
Completed operation 'Network Port Configure' completed with direction ==> DONE
Starting operation 'Virtual Machine Start' on object '0004fb00000600004582721d06a8ab47 (scripts.ex)'
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ovm2.ex failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 start_vm 0004fb000003000026feea96455f02e2 0004fb00000600004582721d06a8ab47, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['xm', 'create', '/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg'] failed (1): stderr: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
, stdout: Using config file "/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg".
Sun Apr 15 10:15:29 BST 2012
Sun Apr 15 10:15:29 BST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:475)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:415)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:362)
at com.oracle.ovm.mgr.action.VirtualMachineAction.sendStartVmCommand(VirtualMachineAction.java:121)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.asyncAction(VirtualMachineStart.java:65)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:573)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:564)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.action(VirtualMachineStart.java:52)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:193)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:264)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1090)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:247)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:207)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 start_vm 0004fb000003000026feea96455f02e2 0004fb00000600004582721d06a8ab47, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['xm', 'create', '/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg'] failed (1): stderr: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
, stdout: Using config file "/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg".
Sun Apr 15 10:15:29 BST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:753)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:471)
... 23 more
FailedOperationCleanup
Starting failed operation 'Virtual Machine Start' cleanup on object 'scripts.ex'
Complete rollback operation 'Virtual Machine Start' completed with direction=scripts.ex
Rollbacker
Executing rollback operation 'Network Port Configure' on object 'network.EthernetPort (2) in 53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc with MAC 00:25:90:38:dc:bf (network.EthernetPort (2) in ovm2.ex)'
Complete rollback operation 'Network Port Configure' completed with direction=DONE
Objects To Be Rolled Back
Object (IN_USE): [EthernetPort] network.EthernetPort (2) in 53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc with MAC 00:25:90:38:dc:bf (network.EthernetPort (2) in ovm2.ex)
Object (IN_USE): [VmDiskMapping] 0004fb0000130000f945246fe9077021
Object (IN_USE): [VirtualMachine] 0004fb00000600004582721d06a8ab47 (scripts.ex)
Object (IN_USE): [VirtualDisk] scripts.img
Object (IN_USE): [Vnic] 0004fb0000070000dc0557c1dac9a1b8 (00:21:f6:33:00:10)
Write Methods Invoked
Class=InternalJobDbImpl vessel_id=34470 method=addTransactionIdentifier accessLevel=6
Class=VirtualMachineDbImpl vessel_id=2790 method=start accessLevel=6
Class=VnicDbImpl vessel_id=1183 method=lock accessLevel=6
Class=VirtualDiskDbImpl vessel_id=2775 method=lock accessLevel=6
Class=VnicDbImpl vessel_id=1183 method=lock accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=2807 method=lock accessLevel=6
Class=VirtualDiskDbImpl vessel_id=2775 method=lock accessLevel=6
Class=VirtualMachineStartingEventDbImpl vessel_id=34479 method=notify accessLevel=6
Class=VirtualMachineStartingEventDbImpl vessel_id=34479 method=setDescription accessLevel=6
Class=EthernetPortDbImpl vessel_id=4943 method=addJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=34470 method=setCompletedStep accessLevel=6
Class=InternalJobDbImpl vessel_id=34470 method=setAssociatedHandles accessLevel=6
Class=InternalJobDbImpl vessel_id=34470 method=setAsset accessLevel=6
Class=EthernetPortDbImpl vessel_id=4943 method=nextJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=34470 method=setFailedOperation accessLevel=6
Class=EthernetPortDbImpl vessel_id=4943 method=nextJobOperation accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=2807 method=nextJobOperation accessLevel=6
Class=VirtualMachineDbImpl vessel_id=2790 method=nextJobOperation accessLevel=6
Class=VirtualDiskDbImpl vessel_id=2775 method=nextJobOperation accessLevel=6
Class=VnicDbImpl vessel_id=1183 method=nextJobOperation accessLevel=6
Class=EthernetPortDbImpl vessel_id=4943 method=nextJobOperation accessLevel=6
Completed Step: ROLLBACK
Job failed commit (internal) due to OVMAPI_4010E Attempt to send command: dispatch to server: ovm2.ex failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 start_vm 0004fb000003000026feea96455f02e2 0004fb00000600004582721d06a8ab47, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['xm', 'create', '/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg'] failed (1): stderr: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
, stdout: Using config file "/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg".
Sun Apr 15 10:15:29 BST 2012
Sun Apr 15 10:15:29 BST 2012
com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ovm2.ex failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 start_vm 0004fb000003000026feea96455f02e2 0004fb00000600004582721d06a8ab47, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['xm', 'create', '/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg'] failed (1): stderr: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
, stdout: Using config file "/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg".
Sun Apr 15 10:15:29 BST 2012
Sun Apr 15 10:15:29 BST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:475)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:415)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:362)
at com.oracle.ovm.mgr.action.VirtualMachineAction.sendStartVmCommand(VirtualMachineAction.java:121)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.asyncAction(VirtualMachineStart.java:65)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:573)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:564)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.action(VirtualMachineStart.java:52)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:193)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:264)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1090)
at sun.reflect.GeneratedMethodAccessor886.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:247)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:207)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 start_vm 0004fb000003000026feea96455f02e2 0004fb00000600004582721d06a8ab47, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['xm', 'create', '/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg'] failed (1): stderr: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
, stdout: Using config file "/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg".
Sun Apr 15 10:15:29 BST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:753)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:471)
... 23 more
End of Job
----------

Looks like I have got around this problem.
I rebooted the 3rd (new) host server and was able to live migrate servers over to it. It would also allow me to start stopped servers on it as well.
Just had to live migrate all the servers from the other two host servers and reboot the host machines.
Once done everything seems to work and I can stop/start servers on any of the host servers.
Nick

ITunes fails to open: please help

Please could someone help me?
Up until yesterday, iTunes was working fine. But then, after I had downloaded some new songs, first it kept saying that my ipod had been removed from the usb port without being ejected (but it was actually still connected to the computer at all times, and I had just left it alone). Then it recommended that I restore my ipod to factory settings, which I did.
Then iTunes quit, and wouldn't open: the icon just bounces once and then returns to normal, with no arrow under it. This happens regardless of whether I left-click or right-click-and-select-open. I ejected and re-connected the ipod three times, restarted the computer twice, and finally tried to download the newest version of iTunes twice to fix it - it seemed to download successfully, but iTunes still wouldn't open. I then retried restarting it and disconnecting the ipod, with no success. I then tried creating another user account on the mac and starting up iTunes - still no luck. I've checked all the settings I can think of and still can't find anything. No files which need iTunes to function can be opened - I can access no aspect of itunes. (On the plus side, my music files are still stored on my computer, although I still can't access them.)
I have also had my ipod checked and there is no problem with it.
If anyone has a solution, or can think of anything I've missed that just might work, please say: I'm really stuck here.

It is fixed! To inform anyone else with the same problem:
I contacted apple and, according to them, downloading the latest version of iTunes fixed the problem with iTunes but created a compatibility issue - to fix the whole thing, I also had to download a system update to at least version 10.4.11. I did this and it works fine now.

Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!!

Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for the first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!! MY IPHONE IS STILL STUCK.

I can't, look at this image

Cannot open Illustrator after update. Urgent fix required please.

I have just updated Illustrator CC today in the hope that the bugs I had would be fixed. Now I cannot open Illustrator at all. I get the error message which says I do not have Verdana installed. I am using Suitcase Fusion 5 (v16.0.4) and I have checked and I have two versions of Verdana (one Microsoft which I can turn off the other is locked), both of which are OpenType Fonts.
I've tried having both open and then turning the Microsoft one off. The other I cannot turn off. Illustrator will not open at all. I've tried re-booting my machine without success. I could at least open Illustrator before the update with exactly the same fonts available.
Please can someone help with this urgently!!!!!
It would help if Adobe, Apple and Extensis would actually talk to each other and write code that works rather than release bug fix after bug fix that still doesn't work!!!!!!
System:
iMac 3.4 GHz Intel Core i7
16 Gb 1600 MHz DDR3 RAM
Mac OSX 10.9

1) OS language - French
2) OS Version OS X 10.9
3) Application Language - French
4) Printer or Printer driver details if installed.
-Brother DCP-9270CDN
-Epson Stylus Photo 1500 th
5) ID: [email protected]
Thnx.

URGENT HELP NEEDED (Bios Settings Failed)

Hey Guys,
I am having problems with my MSI Board, and don't know what to do. I am very much a noob to BIOS/and modding so I apologize in advance. You guys helped me a few months ago getting everything up and running and all was great for months. Then last night I walked away from my PC for a while and when i came back a starting screen was on saying my OC Settings Failed to load, i tried other versions I saved and they all failed as well. I ended up loading failsafe options, and got the "double start" where the computer turns on, then instantly shuts off, then turns on again. This allowed me to load windows 7, which then started to "install updates". So i think while i was away Windows automatically updated and rebooted... but would that effect my BIOS settings?
As I said, I had my system running perfect for months no errors or crashes at all based on the Bios setting you guys help me with in this thread: https://forum-en.msi.com/index.php?topic=147854.0
However, last week I removed the heat sink and installed this cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010
All I did was unhook everything from the MB, install the cooler, and then hook everything back up to the MB. The only thing I may have done wrong is not connect the SATA devices (my HDs and ROMS) back in the spots they were in originally. However after I installed the cooler, they system booted right up, and I haven’t had any problems with my system for the past two weeks. I also should note I didnt make any BIOS changes either after I installed the cooler. So I don’t know if I should have done something there. Yet, like I said the system has been fine for the past two weeks, no crashes or errors... it wasn’t until last night after Windows auto updated that this has begun.
The reason I need "URGENT HELP" is because of course I just a new job with deadlines due and so much video editing work I need to do. I would be fine leaving it on failsafe settings, and forgetting the OC setting all together if I new that would make the system stable. But considering its still doing the "double start" even in failsafe mode, im afraid if i start working my system will crash.
So I am begging anybody for any advice or help they could provide. I will provide my system info below. If anybody can guide me as to what settings I should set in BIOS i would appreciate it. Or perhaps there’s a BIOS update that I should use now that I have a cooler and not a heat sink? If you need any more information from me, just ask. I will be monitoring this thread all day, as I desperately need help.
MY SYSTEM:
Intel 980X chip running Win 7 64bit (with MSI BigBang xPower MB installed in my old Dell XPS 730X)
(1) SATA II WD 3gb Hard Drive @ 1.5TB
(2) OCZ SATA II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
1 SATA DVD DRIVE
1 SATA BlueRay Drive
1 SATA CD Drive
(So 8 SATA Devices Total)
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
1 NVida Geforce GTX 470
1 Soundblaster X-Fi Titanum Card
New Addition Water Cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010

PROBLEM: My OC BIOS setting wont load. Even on failsafe i get the "double start". I want to get back to my OC (stable) settings.
UPDATE: Since I posted somebody messaged me mentioned I should have "reset the CMOS" after I installed the new cooler. So I did that, and now they system starts fine without the "double start". I am able to load one of my saved OC settings now as well (but any others causes a failure).
NEW QUESTIONS:
1. Since I reset the CMOS and now the system is starting fine on my last OC settings, is it safe to assume the sytem is stable for now?
2. I never made any power changes or BIOS changes after I installed the new cooler. Should I have?
3. After I reset the CMOS was I soupposed to reinstall the drivers from the MSI disk again? I did not, and the system seems to be fine, but I thought I was soupposed to do that after a CMOS reset.
4. Is there a new BIOS version for my setup that may be better now? Im currently on v1.5
Here is a screenshot from CPUZ of the system information currently. This is with it booting normally after my CMOS reboot. I just figured id post it incase it helps with any of my questions. Thanks so much for helping guys!

[URGENT HELP NEEDED] Premiere Pro CS6 failed rendering

Hello!
I`ll try to make this quick because I need help asap. I`ve been starting to make YouTube gaming videos 3 weeks ago and my channel is growing up pretty fast. I promised I would make a video everyday but it`s been a full week since I couldn`t upload because I was busy and when I tried to render it failed.
Anyway here`s how it goes.I`ve recorded with fraps some gameplay footage with the resolution of 1360x706. One of my friends reccommanded me Adobe Premiere Pro for editing so I`m using the trial version of CS6. I create a new project and choose a format of 720 25 (cant really remember the exact name). I then import my recorded files and when I place them in the sequence it tells me the resolution is different and asks me if I want to change the sequence settings according to the files. Usually, I ignore it and when I export the Media I just tick the option: "Scale to Fill" and that usually works just fine, quality HD on YT...
But this week it has driven me crazy, I really don`t want to explain how much stress and dissapointment this has caused to me because I think I`ll end up raging...I`ll just tell you I`ve been trying for a couple of days more than 7 time to render the project(each time it takes about an hour and a bit more, so let`s just call it 7 hours wasted). The problem actually is that when I check the output file after exporting the media, the file size is ONLY 24 bytes!!! Other times the file size gets to like half of the one that should be or less, but mainly the render even so takes up a normal length of time of processing but in the end the file is only 24 bytes..Thing is I don`t encounter any error whatsoever...
I really need some urgent help!
Thanks!

1st, some FRAPS information
These are for Premiere Elements, but may help with PPro
Fraps & Elements http://forums.adobe.com/thread/871095
-and more Elements http://forums.adobe.com/thread/943772
-and yet more Elements http://forums.adobe.com/thread/967201
2nd, it is REALLY better to have your project sequence match your video
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

Illustrator fails to open URGENT HELP

Similar Messages

Maybe you are looking for