Illustrator has this "Sketch and Line Art" Under "Object. How is this used and for what? Please enlighten me.

I tried to search and nothing comes up. I can't even find it in the Illustrator's Manual. I am trying to play with different ways to trace or sketch and clicked on this Sketch and Line Art, which seems to always be greyed out, no matter what image I have on the artboard.
Has anyone used it? Please advise.
Thanks!

It's an useful function if you also use this:
Adobe Photoshop Sketch per iPhone, iPod touch e iPad dall'App Store su iTunes
It's an Adobe mobile application you can download and use for free in connection with Illustrator on your desktop computer.
Leonardo Agosti
Join us on: http://www.facebook.com/groups/indesignusergroupit/

Similar Messages

Hi I have itunes UK on my lap top and my daughter has been bought an Itunes USA gift card how can I use this please?

Hi I have itunes UK on my lap top and my daughter has been bought an Itunes USA gift card how can I use this please?

Gift cards can only be used in the country in which they are purchased - so in order to use a US gift card you would need to have a US iTunes account.

Laptop has been repaired and for some reason itunes library has been wiped. Ipad still has all the music on, is there a way i can repopulate itunes?

My laptop has been repaired and for some reason my library on itunes has been wiped. Didn't pay attention and synced my iphone so have lost all the tunes off that now too. Ipad still has all the music on, is there an easy and free way to repopulate itunes from the music on the ipad?

See Recover your iTunes library from your iPod or iOS device.
tt2

HT1689 How do we find out what has been purchased and for how much on an IPhone 4

How do we find out what has been purschased and for how much on an IPhone 4?

View Purchase History
http://support.apple.com/kb/HT2727

Account needs sorting once and for all PLEASE!

Hi, I have sent an email to moderators here as I did last time. Last time I was given a rebate, for incorrect bill. My bill AGAIN has not been worked out correctly. To be frank I am fed up of rubbish BT not sorting out my problems since September last year.
One thing cannot be done at a time, my whole account especially online is all in a mess, nothing is as it should be, and someone needs to go on a computer to go through it with a toothcomb to fix it. Rebate on a bill is not going to change the fact my bills are being generated incorrectly. STILL!
I wish to SPEAK by phone to anyone who can fix this as I am not going to continue this way with BT, and if they even try to charge me for no honouring my side of the contract, then I shall end up taking this up with a solicitor. I have even been charged £10 on my new bill for not honouring my direct debit, considering one of the foreign advisors had promised my bill would not go out my bank, but it did try to, twice and I was charged £50 from my bank, and you even try to charge me £10 for YOUR mistakes.
I am fed up. I have 8 months left on this so called contract. I do not intend to go on like this for that amount of time. I want my account sorted out once and for all PLEASE!
I apologise to you forum admin, and I know this is NOT your error, I am merely really frustrated at the lack of communication to fix my problems and have spoken via phone 3 times since my last forum entry to try fix my online account, and have been promised again it would be fixed and it is not.
Thank you

Hi thebillies,
We were looking into this for you and had reported a fault to try and get to the bottom of the discrepancies.
I'll make sure that you get an update on this later today.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I have a MacBook Air and for what ever reason, the print settings have gone out of whack. I am not sure how to set to print a normal A4 paper size or a standard envelope. These settings were working O.K., but not now

I have a MacBook Air and for what ever reason the print settings for envelopes and normal A4 paper size changed from printing correctly each time I wished to print. Now, each time I wish to print either, I have to rest paper size and or Envelope vertical or horizontal. Can anyone assist with how to reset in order to print correctly without the need to rest each time please?

Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432

How can I use TopLink for querys that have two and more tables?

I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
Thank you for see and answer this question.

You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
Zev.
check out oracle.toplink.expressions.Expression in the 10.1.3 API

Methods used in cl_gui_custom_container for ALV and for what purpose

Methods used in cl_gui_custom_container for ALV and for what purpose and i want the exact senario for the usage of those method?
2. What events are used in ALV?
I anyone help me please,
Points will be awarded.
Thank you & Regards,
Jagrut BharatKumar Shukla

hey,
look at this sample code....
TABLES: SFLIGHT.
G L O B A L   I N T E R N A L   T A B L E S
DATA: GI_SFLIGHT TYPE STANDARD TABLE OF SFLIGHT.
G L O B A L   D A T A
DATA: OKCODE LIKE SY-UCOMM,
      G_WA_SFLIGHT LIKE SFLIGHT.
Declare reference variables to the ALV grid and the container
DATA:
GO_GRID             TYPE REF TO CL_GUI_ALV_GRID,
GO_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '0100'.
*&      Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE OKCODE.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
Create objects
IF GO_CUSTOM_CONTAINER IS INITIAL.
    CREATE OBJECT GO_CUSTOM_CONTAINER
      EXPORTING CONTAINER_NAME = 'ALV_CONTAINER'.
    CREATE OBJECT GO_GRID
      EXPORTING
        I_PARENT = GO_CUSTOM_CONTAINER.
    PERFORM LOAD_DATA_INTO_GRID.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Form load_data_into_grid
FORM LOAD_DATA_INTO_GRID.
Read data from table SFLIGHT
SELECT *
    FROM SFLIGHT
    INTO TABLE GI_SFLIGHT.
Load data into the grid and display them
CALL METHOD GO_GRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      I_STRUCTURE_NAME = 'SFLIGHT'
    CHANGING
      IT_OUTTAB        = GI_SFLIGHT.
ENDFORM.                    " load_data_into_grid
<b>* the Events are</b>
ITEM_DATA_EXPAND, REPREP_SEL_MODIFY, CALLER_EXIT, USER_COMMAND, TOP_OF_PAGE, DATA_CHANGED, TOP_OF_COVERPAGE, END_OF_COVERPAGE, FOREIGN_TOP_OF_PAGE, FOREIGN_END_OF_PAGE, PF_STATUS_SET, LIST_MODIFY, TOP_OF_LIST, END_OF_PAGE, END_OF_LIST,AFTER_LINE_OUTPUT, BEFORE_LINE_OUTPUT, SUBTOTAL_TEXT, CONTEXT_MENU.
<b>the methods used with the class CL_GUI_CUSTOM_CONTAINER are as follows......</b>
IF_CACHED_PROPGET_NEXT_PROP, IF_CACHED_PROPSEEK_FIRST_PROP, IF_CACHED_PROP~SET_PROP, IS_VALID, FREE, GET_PROPERTY, SET_PROPERTY, CALL_METHOD, ASSIGN_PROPERTY, CALL_METHOD_RESULT_GUI_OBJECT, GET_PROPERTY_GUI_OBJECT, IS_CACHED_PROP, ADD_CACHE_PROP, REMOVE_CACHE_PROP, GET_CACHE_PROP, SET_CACHE_PROP, IS_CACHE_VALID, INVALIDATE_CACHE, GET_FOCUS, SET_FOCUS, SET_NAME, GET_NAME, GET_ENABLE, SET_ENABLE, DISPATCH, FINALIZE, GET_ADJUST_DESIGN, GET_GRID_HANDLE, GET_GRID_STEP, GET_HEIGHT, GET_LEFT, GET_METRIC, GET_MODE, GET_REGISTERED_EVENTS, GET_TOP, GET_VISIBLE, GET_WIDTH, IS_ALIVE, REG_EVENT_LEFT_CLICK_DESIGN, REG_EVENT_LEFT_CLICK_RUN_MODE, REG_EVENT_MOVE_CONTROL, REG_EVENT_RIGHT_CLICK, REG_EVENT_SIZE_CONTROL, SET_ADJUST_DESIGN, SET_ALIGNMENT, SET_GRID_HANDLE, SET_GRID_STEP, SET_HEIGHT, SET_LEFT, SET_METRIC, SET_MODE, SET_POSITION, SET_REGISTERED_EVENTS, SET_TOP, SET_VISIBLE, SET_WIDTH, GET_PATH, CONTROL_REGISTER_EVENT, CONTROL_UNREGISTER_EVENT, GET_EVENT_PARAMETER, GET_REGISTERED_EVENTS_EX, GET_WINDOW_PROPERTY, INIT_CONTROL, INIT_CONTROL_WITH_HWND, REGISTER_CACHED_PROPERTY, REGISTER_CACHED_W_PROPERTY, SET_REGISTERED_EVENTS_EX, SET_WINDOW_PROPERTY, UNREGISTER_CACHED_PROPERTY, UNREGISTER_CACHED_W_PROPERTY, GET_CONTAINER_TYPE, RESIZE, GET_INNER_WIDTH, LINK, GET_LINK_INFO, GET_INNER_HEIGHT, SET_MODE_FOR_ALL, GET_DYNPRO_CONTAINER, GET_FRAME_CONTAINER, GET_CHILD, ADD_CHILD, REMOVE_CHILD, REMOVE_ALL_CHILDREN, CONSTRUCTOR.

ATI X1900 G5 - who has this card? Help me please!

Hello,
I would like to know if anybody has this card installed in his PowerMac G5?
Has anybody noticed some problems?
I have it from about a week and I notice few problems.
Can somebody tell me about his experiences with this card, because I don't know if I should exchange it in OWC or the problem is because the ATI (AMD) didn't test it enough with G5.
PowerMac G5 2.0 DualCore, 4.5GB RAM Mac OS X (10.4.8)

Hi,
I have big problem with my ATI X1900 G5 card. 2 weeks ago I received from Macsales this card for my PowerMac G5 2.0 DualCore PCIe.
Before this, I used NVIDIA 6600 LE 128MB. Few weeks ago I changed for a few days to NVIDIA 6600 256MB VRAM for doing rendering tests in Motion. After this change I noticed 2 times better performance - as I expected. So I decided to buy the newest product of ATI.
But after change from NVIDIA 6600 256MB to ATI X1900 I don't see any improvement! Even worse! The Motion 2.1.2, now rendering my projects a little bit longer - about 10 percent longer. And the most strange is very long time needed to open Motion's projects!!
For example:
when I double clicked on ones of my projects - Motion 2 started and opened this project during 50 sec. (with NVIDIA 6600LE card). Now, with ATI X1900, when I do the same, with the same project - Motion starts and open this project in 2min 20sec! Why so long?
And other strange thing:
In system profiler I see:
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCI
Slot: SLOT-1
VRAM (Total): 128 MB
What happened with the rest Video Memory? It should be 256MB.
However, in System Preferences/ATI Displays/Profile I see:
FCode Version: 2.00
NDRV Version: 1.1f39
VRAM Size: 256 MB
I expected this card will be much faster than NVIDIA 6600 isn't it? Am I wrong?
Why the system doesn't recognize all video memory? Should I suppose that my Mac use and work with only a half of Video Memory ATI's card? And because of that, is this card so slowly?
I also noticed that there is a problem with wakeing up the computer after sleep, but I have read about this in some posts here.
Can somebody help me what is going wrong with this card, please?
I found in some posts and some web sites that this card is really fast, but at this moment I am really disappointed.
Look here for some tests:
http://www.barefeats.com/quad15.html
In my computer this card is worst than NVIDIA 6600!

How do we use SSO for both Windows AD and Trusted authentication?

We want to have the majority of our users access the BO 4 BI Launchpad using SSO with Windows AD authentication. We have set this up and it's working ok. We also have a subset of external users and need to configure SSO with Trusted authentication for their Enterprise accounts. Support says we can only have SSO for one authentication type. I'm assuming we can work around this by installing a 2nd Tomcat instance on our Linux server. Has anyone done this type of config successfully? Any other ideas would be greatly appreciated. Thanks!

Hi Collins,
BOE's CMS can be accessed from multiple application servers.
Please have a look on this new article [here|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00240702-8343-2f10-ed9a-85ece14c93db] .
You may use this method for other application servers(not only NW) but just dont add the file "web-j2ee-engine.xml" as its not needed.
regarding sections 4.2.4 on the document, On one application server just set "authentication.default" property under the file BIlaunchpad.properties, to "secWinAD"(for win AD). and on the other set it to "secEnterprise".
please report any problems you may encounter,
thanks,
Idan

Once and for All ---- Please

Hello all,
I have used CF for several years now and bought Flex as soon
as it was released. In my process of understanding how Flex handled
Remote objects for CF I decided to use the CF Builder wizard for
Flex that creates all kinds of nice CFC's and stuff for me to
connect to a database and CRUD the data within. Ok all fine and
dandy on the local machine, works great, I am impressed! That is
until I try to upload the app to my Shared Server (HMS) and I get
all kinds of cryptic error messages like:
(mx:rpc:Fault)#0 error id = 0
faultCode ='Client.Error.MessageSend"
faultDetail = "Channel.Connect.Failed error
NetConnection.Call.Failed :HTTP:Status 500"
faultString = "Send Failed"
message = "faultCode.Client.Error.MessageSend
faultString:'Send Failed'
faultDetail:'Channel.Connect.Failed error
NetConnection.CallFailed: HTTP: Status 500" name = "Error"
rootCause = (Object)#1
code = NetConnection.Call.Failed"
description = "HTTP: Status 500"
details = "
http://www.MYDOMIAN.com/flex2gateway/"
level = "error"
So I have read the DOCs and read all the blogs I can find on
the subject but no one can clearly answer as to why I can not make
this work on a Shared Server if I can make it work on my local box,
Heck I can even tap into the MySQL database on the Shared Server
via the Flex builder. I use HostMySite.com with the CF package if
that helps.
If it is just a matter of something on my hosts end I need
them to configure for me that would be nice to know, or if I simply
can't use Flex and CF together on a Shared Server all together.
That would be nice to know. But for all the hype Flex is getting
and how easy it supposed to be to create an app with CF, I am
wondering why someone can not answer this question once and for
all. I know others have posted to this and many other forums asking
the same things I am. Is it too much to ask one of the Flex Gurru's
of Adobe, or anywhere else for that matter to help us out?
Not everyones wants to run their own server and I would think
that Adobe would have kept that in mind when creating Flex, and how
it would run on shared servers.
So please if anyone can help understand this please let me
know.
Thanks

Halodev / Peter,
I was JUST about to ask the same question. The problem I was
having was migrating a Flex app created on my local machine,
connecting with my local CF app, to a test (model of production)
server.
I knew the following:
1) The flex app worked as expected
2) The data was not an issue, as I mapped a datasource to my
production DB
My main concern was getting the Flex app to work on the test
server, but my biggest issue was the fact that the setup of my
local and test servers are different. Example, I have a single
instance locally, running off localhost. On my test server, I have
multiple JRUN instances on the D-drive (as opposed to the c-drive,
locally).
From this post, I figured out that I needed to change the
project properties to account for the different location of the
flex-config file. I right clicked on the project and selected
properties, and altered the values in the "Flex Compiler" and "Flex
Server" sections to reflect the TEST server locations of the
flex-config file.
Now, to make life hard on myself, the "d" drive on my laptop
is the CD ROM, and when I tried to enter the path in FB, I got an
error saying that the path was invalid. I looked into partitioning
my drive, but I was warned off it by our tech guy here (besides, it
seemed too much like real work!). SO, I burned a CD with the proper
path, just as a temporary solution.
I re-built the app, and deployed ALL of the files in the
local projects "bin" directory. It worked, eventually, but there
are some questions I have, maybe, Peter, if you read this you could
help.
1) I had trouble with SSL - my test servers use them (as do
the production servers). The SWF started to load but I got a 403
error (that is SSL related, I believe). I'm not sure if that was
when it was loading, or trying to access the CFC. Any thoughts on
this? Are there known SSL issues?
2) The whole "D" drive thing was a pain. As I mentioned, I
have multpile JRUN instances on my Test (and Dev) server - one for
each site. If I created a single generic site on the c-drive, would
all sites that access flex be able to use that flex-config file, or
do they need to access the local file? I'm not really getting how
the flex services-config.xml file relates. Maybe I'll re-read your
posts in this thread.
3) Do I need to copy all the files from the bin directory, or
is that over-kill? What is the bare-minimum code I need to get the
Flex SWF to run? Could I just copy a sub-set of the HTML to a
content management system?
Any help with the above is appreciated.
I'm not sure if I answered the original question, or
contributed positively to this post - I hope I did, and that
someone will find this information useful in the future.
Cheers guys,
David

Outlook 2007 .ost file corrupt / scanpst.exe 3-4x daily & 3 to 4 runs before "clean", long term issue - need help on how to repair my .OST FILE once and for all, please...

I've had many issues with my .ost data file (couple years) with: very slow going into outlook 2007, scanpst.exe 3-4x before its "clean", and have to run it few times daily.
No major issues i can pinpoint, but just SLOW, hangs at times, file less than 1GB, IT people just mess it up more, etc.
NEED some PROFESSIONAL minds to help me get this data file cleaned up once and for all... forever hopefully.
Any help greatly appreciated.

Why the need to repair it?
You could:
1. Create a new Outook profile a different name and a new ost will be created ( leaving the old one there)
2. Close up Outlook completely, delete the existing.ost and re-open Outlook to create a new one.
3. Close Outlook completely and rename the existing .ost and re-open Outlook to create a new one.

How can i use FNDLOAD for XML reports and data defnitions

I registerd concurrent program and linked xml reports and data defnitions in staging instance, and successfully moved to DEV.. after that stage is refreshed and when i download the details from DEV and uploaded to Stage only concurrent program i can upload...Wheteher we can use FNDLOAD Command for the Data definitions or Data template for the XML Report,used FNDLOAD for the concurrent program, it uploaded only concurrent program details.

Hi,
Use XDOLoader.
Note: 469585.1 - How To Use XDOLoader?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=469585.1
Regards,
Hussein

Previous page had this: Common Questions What happened to the Status Bar? t you start with telling us What is the Add-on Bar? How do I use bookmarks? What are App Tabs? How do I customize the toolbars?

Don't assume people automatically know all your technical terms! Before you talk about, e.g., "status bar", it would be really helpful to show or tell us WHERE IT IS.
Since you made basic things like "history" and "bookmarks" harder to find, I'm back to using "CTRL H" for history -- is there a keystroke method to get to the bookmarks?

See:
* [[Glossary]]
* [[Browsing basics]]
* [[Tabbed browsing]]
* [/kb/how-do-i-use-bookmarks]

Illustrator has this "Sketch and Line Art" Under "Object. How is this used and for what? Please enlighten me.

Similar Messages

Maybe you are looking for