Illustrator is slow when connected to intranet

The problem looks like that Illustrator sees that the computer is connected to a network and proceeds to try and access adobe.com.
This slows everything down because our intranet is not connected to the internet.
Examples:
Loading Illustrator CS5:
     The splash screen is fast but once within the app you must wait at least 1 minute before you can do anything.
F1 key or Help:
     Illustrator CS5 attempts to connect to the online community which takes about 5 minutes then times out and brings up a local help file.
Now when the computer running Illustrator CS5 is disconnected from the intranet, everything works fine; The program and even the local help loads instantaneously.
I have tried editing the Helpcfg found here http://forums.adobe.com/message/3238181?tstart=0 but that didn't work (I need an example to see if I did things correctly).
Is there an easy way around this?
Exposing the computer to the internet is not an option nor is disconnecting the computer from the intranet.
Any feedback would be appreciated.

I am having the exact same problem as Aaron. It's nuts...
As mentioned, internet is very slow download (0.7Mbps <- Not a typo) but a normal upload (3.0Mbps) when connected to the Airport Extreme by ethernet or wirelessly, but when I connect my computer straight to the modem, it's fast (12Mbps down, 3Mbps up). After I discovered this behavior, I took it to my friend's house (he also has Comcast) and I got the exact same behavior using his computers, modem, etc. I determined that my Airport was bad and took a trip to see the "geniuses" at the Apple Store. The AEBS worked perfectly there. Just to be safe, I took the AEBS to my work and it also works perfectly there.
Needless to say, I'm baffled. I've tried resetting all of my devices multiple times to no avail. I've tested to see if I have a DNS lookup issue (http://forums.macosxhints.com/showpost.php?p=199191&postcount=7), but that's not the case.
The results I've mentioned are from speedtest.net.
Does anyone have an idea?

Similar Messages

  • MacBook AIr usb ethernet slow when connected to second switch

    Hi,
    We have MacBook Airs with 100 Mbps Apple USB ethernet adapters.
    We have managed Cisco switches for the LAN.
    We experience fast speeds when a USB etherenet/MacBook Air is connected directly to the switch.
    However... if we introduce a second switch between the MacBook AIr and the main Cisco switch we experience horiffic slowdowns for some (not all) network activity.
    For example, we have IP phones with ethernet passthrough. They work great with iMacs and Thunderbok Macbook Airs. However, if we connect a MacBook AIr/etherenet adpater to the ethernet phone, we expereience a horrific slowdown when using Apple Remote Desktop Manage > Copy items... (and also on connectoins to an in-house database). It's probably 15 - 20x slower than when connected directly to the Cisco switch. Other network operatoins work at expected speeds an the Air.
    It's not just connecting to IP phnones that causes this problem. If I use a Netgear 1000/100 switch on the desktop, set up as
    MacBok Air USB ethernet > Netgear > Cisco
    we have the same horrible slowdown for some network operations.
    I purchased a 3rd party USB adpater, but had the same results.
    Can anyone shed any light on this issue, please? Is there a setting onn teh CISCO switch that is causing the problem? Any know problmes with USB etherenet on MacBook air.
    Many thanks,
    b.

    RonAnnArbor wrote:
    Is this a question? A complaint? Nothing any of us can do about that, and this is a well-documented and well-known issue.
    It doesn't effect most MBA users who most likely use wireless for most of their transactions, and the times you need to use ethernet, you are right, it will run slower.
    Just curious I have a pretty fast 5N wifi network. If I'm setting up a new MB Air from another laptop is it going to be faster through the ethernet adapter or the wifi network?

  • Labview visa getting slow when connected to arduino

    visa in labview when connected to arduino prog gets slow
    i have checked it passes the required codde but action is slow
    and most important every time to get the o/p i need to stop the prog then start again.
    i tried doing a new prog with only one string constant and visa in  singlw while loop thinking this was due to lenghty progs but still things are not working as i want i.e. fast n without stopping the prog. i have attached my files n images of required portion of block diag
    i have used a string of lenght 10 char n i my program and just one visa write.
    Solved!
    Go to Solution.

    Ranjeet_Singh my requirement is to send 10 character srting from visa write to arduino. When i change the controller index and click on my led's which i have designed to transmit my code( only if true) using case selctor the code must reach arduino. It reaches but there is a delay of 2 to 3seconds everytime i send. and next time when i change th index and click the led to send the code it is not passed. when i run the program again it is passed. I have added all my code in a single while loop which runs continously.
    I have made a code in arduino for my hardware. when i send codes from arduino my hardware runs successflly.
    n yes only command response operation is involved.
    regarding 2011 i wont be able to i guess.but i am copy pasting my prog in labview 7.1. except visa everythig is pasted i guess.
    i have attached images of my block diagram for further reference.
    my harware is: two 8bit DAC, DDS an i.c. which accepts code and generates sinwave, digital potentiometer which accepts code and takes a value between 0 to 10kohm and 12 relays take thier control signal from this code.
    crossrulz m using port 18 of my p.c and connecting usb to arduino mega 2560. 
    my harware is: two 8bit DAC, DDS an i.c. which accepts code and generates sinwave, digital potentiometer which accepts code and takes a value between 0 to 10kohm and 12 relays take thier control signal from this code.
    i judge labview goes slow because when i dont connect arduino n run the prog the hex code indicator going to visa displays code exactly at the instant when i press led for transmission of code.
    as per ur sugesstion  i checked arduino board i found thr transmission and recieve led's are on continously.and as per my labview prog my transmission should actually start only when i click the led.may due to continues transmissiion its getting slow. 
    but what can i do then? 

  • Slowness when connecting to RemoteApp configured in Windows 2008 R2 Server using RDP file

    Dear All,
    When connecting to a RemoteApp configured in Windows 2008 R2 with less privileged user it takes ~20 seconds to connect.
    Initial connection to
    application takes about 20-30 seconds and once loaded, subsequent RemoteApp connection takes
    2-3 seconds. i.e. if there is a disconnected session available in the server it connects quickly otherwise it takes long time.
    I am seeing this issue with Windows 2008 Server, when I connect to a Windows 2012 Server RemoteApp gets
    connected quickly. Also if I try with higher privileged user (like RemoteAdmin) connection is quick. The user I am trying is having lot of group policies set to limit user access to file system, desktop and registries.
    If I keep UAC settings to minimal level connection happens quickly(i.e. solves this issue). But I am
    not supposed to change the server UAC setting. It seems this has something to do with the list of group policies set for the user.
    Any suggestion to avoid this first time connection delay for less privileged users for connecting to RemoteApp (in Windows 2008 Server).
    Thanks
    Bachuu

    Hi Bachu,
    Thank you for posting in Windows Server Forum.
    First of all, if you are using RD Gateway serve then I would like you to
    uncheck the “Bypass RD Gateway server for local address” under RemoteApp Manager Checkbox and notify the result.
    Configure Remote Desktop Gateway Settings
    Also like you to update the RDP client version to RDP 8.1 and then check the result. In addition,
    I will suggest you to check that you have proper certificate in place. You can enable certificate revocation checking on RD Gateway client. Might due to this, you are facing issue. Please notify that you find any certificate related warning. Refer below article
    for information.
    How to Enable Certificate Revocation Checking on a Remote Desktop Gateway Client
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Since iOS7 update my iPad slows when connected to projector via VGA cable

    I use my iPad in class as a teaching resource every day. It's invaluable. However, since I updated it to iOS7, whenever I use my lightning-to-VGA adapter cable to connect my iPad to my projector it a) slows down the iPad to a crawl, and b) shows a black screen on the projector. I must stress, it's an original Apple cable that I paid a lot of money for, so I'm not particularly happy about this development.
    Can anyone suggest what the problem might be and if there's anything I can do to rectify it?
    Thanks in advance!

    I am not using keynote. I am just using the VGA to mirror the iPad... or at least, that it what I have done until now. Maybe the odd SlideShark presentation, or a YouTube video, or maybe to display text on a PDF in Dropbox or iBooks on the WB so all the students can read it together or maybe complete a quiz online using Chrome, Safari or Puffin browsers. Now it doesn't even mirror, and the iPad just slows completely. When I unplug the lightning-to-VGA cable it speeds back up again.
    All apps are up to date as far as I am aware. I will be testing it again tomorrow - since the latest update to iOS 7.0.3, as the projector's in my class and I'm currently at home, and will post if there's any difference. I'll also see if a reboot helped, as my iPad's been rebooted over the weekend after the update.

  • Illustrator is slow when i work with micro text

    I have Adobe Creative Suite 4 Design Premium, and all programs works perfectly, except Illustrator, i can manage all but when some work have microtext it takes a lot of minutes thinking and processing the order, inclusive "select" takes about 2 minutes in process the order. I uninstall the software and instal again it but it doesn't matter continues as same as before.
    i have 3 Mac G5 with xeon and 8Gb of RAM, and a lot of space in my hard disk,and all the updates of the mac, so i dont know what is the problem, the software is original and the macs are new, what can i do?
    There is an update that fix that problem?

    Hello Computerforms,
    I have type set many micro fonts in many different projects. And many people in the industry have noticed that Illustrator CS4 is very slow doing simple task like microprint.
    Links about people with the similar problem using CS4:
    http://forums.adobe.com/message/2064981#2064981
    http://forums.adobe.com/message/1986182#1986182
    http://forums.adobe.com/message/1927899#1927899
    You can see the difference if try to set microprint using CS3 or older version. Your computer is more than qualify for this little task.
    Please note that CS3 is extremely bad when it come to strokes (any line lower that .012 point will display the worst line you ever seen). for this type of work I will recommend to work with CS2. Yep the old version is superior to CS3 and CS4.
    I hope this helps!

  • Illustrator CC crashes when connected to the internet.

    I have been trying to fix illustrator cc, it's keeps crashing on launch. I have found though if my computer is not connected to the internet then it will work fine. I don't have to disconnect to use the program. I also don't want to have to run a program like little snitch when using the program. Please help!

    Hi Andrew,
    On Mac, please choose 'Go to Folder' from  Finder’s 'Go' menu and type:
    ~/Library/Logs/DiagnosticReports/
    There you would find the crash logs for Ai CC. It would be something like "Adobe Illustrator_<Date of crash>_<ComputerName>.crash". Please zip those files and send the same to [email protected]
    On Win, you could refer this illustrated article for locating event logs :
    http://www.cyberlink.com/support/faq-content.do?id=10449
    Please let me know if you face any issue/have any doubts.
    Thanks and Regards,
    Nishant Kumar Thakur

  • MS Access connectivity gets slow when connecting insidde network domain

    Hello,<o:p></o:p>
    We've created an application based on Excel VBA that connects to an access DB located at the file server in our network domain. Now I'm installing
    same app in another server for another domain, but the connection is really slow so the app hangs while retrieving information from the .mdb file located at the server.<o:p></o:p>
    I created a local environment in my computer to test and realized as as soon as I connect the network cable the connection to the DB get slow, but
    when I unplug the network cable the app start to responding as usual.<o:p></o:p>
    I'm using Ole DB jet 4.0 with the following connection string:<o:p></o:p>
    cnt.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source= MasterDB ;Jet OLEDB:Database Password= 12345;"<o:p></o:p>
    It seems that the problem it is related to some authentication on the server that makes the connectivity slow because it has not sense to me that
    when I connect the network cable and log into the domain the speed goes down even if the application is looking to the DB file in mi local hard drive.<o:p></o:p>

    I'd try them over here.
    Office
    Access forums on Microsoft Answers
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Leopard File Sharing Slow when Connecting to a Tiger iMac from a MacBook

    I have a MacBook (2.0 GhZ Alu) with Leopard and an iMac (2.0GhZ Alu) with Tiger (both most recent versions). The iMac is connected to a Belkin N1 wireless modem-router and the MacBook uses Airport to connect to the router. On the iMac I use Finder and select Network and am instantly able to log-in and have access to the files on the MacBook within seconds, but while the MacBook instantly identifies the iMac connecting to it takes a number of minutes - much slower than when using the iMac - I have to wait while it finds the files and then wait again to log-in using my user name and if I close the Finder window it needs to happen all over again. Any ideas?

    I've now updated both systems to Snow Leopard - Tiger and Leopard don't like sharing.

  • IPad slow when connected to Apple TV

    My iPad starts to opperate really slowly whenever it is connected to the Apple TV. when it is not connected to airplay it runs fine but as soon as air play is turned on it starts running really slowly.
    Can anyone help?

    Hi,
    Have you tried to update Apple TV yet? (5.1)
    http://support.apple.com/kb/HT1600
    Some users reported that they needed to reset all settings on Apple TV after the 5.1 update.
    Apple TV menu / General.
    Please let me know if this all has been done and we will take it from there.

  • Illustrator CC slow when opening files

    I recently upgraded to a full CC subscription. I really love it. But it takes Illustrator CC a long time to open a simple AI file. Even if it's just a simple file on my desktop. I know it takes a while when you open files that contain a lot of embedded/linked images or if the file is on a network drive, but that's not the case here.
    Anyone happen to know a solution?
    Thank you!
    Kind regards,
    David

    David,
    Just to make sure (not knowing whether you had the trial CC before this) are all the faces of the Verdana and Tahoma fonts installed and enabled/activated through the OS (not font mangement) as TTF (not OTF)?

  • Why is Illustrator CS6 slow when I try to modify anchors?

    I am having some issues dealing with vectors in illustrator CS6. Every time I modify an anchor or handle on a path it takes illustrator a good second/second and a half to update the change. If I am working on normal view it shows the path being modified but its stroke is still in the original position and when I try to work on outline view it just takes that second to update.
    OS: Windows 7 pro. - 64bit
    Processor: Intel core i7 CPU Q740 @1.73GHz
    RAM: 8GB
    Any thoughts on why that is and how I can solve this problem?
    thanks

    iLeeShuo wrote:
    Please tell me what's wrong with my itunes
    there's nothing wrong. iTunes is re-writing the tag info for the file, is all.

  • Premiere Pro CS6 opening slow when connected to slow network.

    I recently setup a user with his computer running behind a VPN router so that he could work from home. The VPN router is used to give him access to local resources.
    A strange thing started to happen with Premiere where it would be very slow to open. Either it hangs on the splash screen for a few seconds to a few minutes or the splash screen loads normally but when the program opens, it is just white for a few minutes until it finally opens. If I try to click on the program Windows tells me that the program is not responding. Being that the premiere was working fine before putting the PC behind the VPN router, I feel like it had to be a network thing. I had the user momentarily unplug the Ethernet cable from the router and Premiere loaded up quick like it normally does. So when Premiere opens, it must be trying to access some local resources.
    The problem is I cannot figure out what that is. I went through all of the preferences and nothing is set to use a network resource. Media cache is set to us a local SSD. What else could Premeire be trying to access to launch?

    Premiere communicates with Adobe as it opens. I'm assuming it is verifying that you have an active account/aren't pirating the software. On my computer the maximum bandwidth usage is 1Mbps (that's bit not byte), so unless your VPN is incredibly slow, this probably isn't the issue. Maybe there's some firewall interaction that is limiting Premiere's ability to talk to Adobe as it launches?

  • Lion's Software Update to slow when connecting to a Snow Leopard Server

    Hello…
    I have some problems with the Lion's Software Update.
    I try to make them by our server (10.6.8). The server's conf has been updated as explain in this article:
    http://support.apple.com/kb/HT4771
    After doing that the server has downloaded all Lion updates.
    When I try to connect with my Lion installed Mac Book Pro, the Software update window appears, but seem to be stuck…
    I've made the test on an Lion installed iMac 27, everything was fine. :/
    Here ars the Software Update service's logs: apparently connection is all right.
    10.24.24.250 - - [19/Oct/2011:13:40:00 +0200] 80 GET "/index.sucatalog" 200 1474827 "-" "Mise%20%C3%A0%20jour%20de%20logiciels/352 CFNetwork/520.2.5 Darwin/11.2.0 (x86_64) (MacBookPro5%2C4)"
    Can somebody help me?
    Olivier
    Mac Book Pro – 10.7.2
    iMac 27 – 10.7.2
    XServe – 10.6.8

    you don't need to import users from SL server to lion if your binding to your SL OD master
    the SL OD master users and groups will show in profile manager
    lion server has to be OD master to use profile manager, you'll end up with 2 masters the SL server
    and lion. unless your planing on migrating the SL server to lion
    what I'm currently using,  lion OD master is bound  the SL OD master with out username and password 
    SL server OD master users and groups also appear in WGM on lion server
    sorry I quite don't understand why you'd want to import users from SL into lion
    you'd end up with having to keep to OD's in sync with passwords and users
    which kinda defeats the purpuse of having one point for authentication??
    if you just want to test lion an a separate LAN you could try exporting users and groups computers from SL
    and importing in lion, you'd lose the user passwords
    you could still test lion proile manager without importing users just as you've done
    if you've setup everything correctly and joined the SL OD master from the lion OD master users should appear in WGM and profile manger. in my case I jioned the Lion server to the SL OD master before setting up lion profile manager, OD master etc.

  • My internet is slow when connected to the wireless router..how do I fix this?

    I am having problems with my internet connection. I have a netgear wireless router that I purchased 2 years ago. My computer has been running off this connection and recently it has been extremely slow. So I plugged in the ethernet cord directly into the back of my computer and it runs fine. This would solve my problems, BUT I have other devices that I would like to run off the wireless connection, and I don't like going back and forth. SOmeone please HELP!

    I had the same problem a few months ago, nobody knew what the reason for 100%.
    Advised me to restart router, did not help.
    Advised me to refresh settings in mac and the connection, did not help for long,  after two weeks it was the same.
    Advised me to change router because mac should work with any router but prefer AirPort to work with.
    This solved all the problems and even the connection work faster.
    Before AirPort Extreme I had for 2 years belklin's router and for 2 years netgear, looks like 2 is the magic number for others.
    Unless the mac is doing something special, but I do not believe it.

Maybe you are looking for