Illustrator is slow when i work with micro text

I have Adobe Creative Suite 4 Design Premium, and all programs works perfectly, except Illustrator, i can manage all but when some work have microtext it takes a lot of minutes thinking and processing the order, inclusive "select" takes about 2 minutes in process the order. I uninstall the software and instal again it but it doesn't matter continues as same as before.
i have 3 Mac G5 with xeon and 8Gb of RAM, and a lot of space in my hard disk,and all the updates of the mac, so i dont know what is the problem, the software is original and the macs are new, what can i do?
There is an update that fix that problem?

Hello Computerforms,
I have type set many micro fonts in many different projects. And many people in the industry have noticed that Illustrator CS4 is very slow doing simple task like microprint.
Links about people with the similar problem using CS4:
http://forums.adobe.com/message/2064981#2064981
http://forums.adobe.com/message/1986182#1986182
http://forums.adobe.com/message/1927899#1927899
You can see the difference if try to set microprint using CS3 or older version. Your computer is more than qualify for this little task.
Please note that CS3 is extremely bad when it come to strokes (any line lower that .012 point will display the worst line you ever seen). for this type of work I will recommend to work with CS2. Yep the old version is superior to CS3 and CS4.
I hope this helps!

Similar Messages

JDeveloper is becoming too slow when you work with web services

Hi,
I am trying to write some web services code but after generating the Java classes from the WSDL the IDE becomes extremely slow.
I need to wait 5-10 seconds each time while writing a word in Java editor. I tried to disable auto suggest and all the fancy things like that but could not make it faster.
Any suggestions ?
I am using JDeveloper 11g r1p1.
Thanks

Hi,
I don't have any backing bean for this project. I am implementing a web service by using a WSDL. I guess the problem is JDeveloper can't handle having so many Java files .
When I generate the Java classes from the WSDL I end up having hundreds of Java classes and some are a little long. Looks like it is the same behavior that you mentioned about having big backing bean classes..
For now I am using IntelliJ Idea for editing the Java code and I use JDeveloper for running only. Idea doesn't bother having that many Java files and works as it supposed to work.
Thanks

Error message an error occurred while signing in " when I worked with Create PDF and at the signed

Error message "an error occurred while signing in " when I worked with Create PDF and at the signed in status. Please help so that I can continu my work.

Hi Stacy,
Thank you for your attention.
I have been working with Create PFD under normal procedures including
sign-in and several documents had been finished. However, when continued
creating another document the computer took a long time to pprocess and
finally a mesage appeared: "An error occurred while signing in" and stopped
there. I clicked the OK button and start creating again and the same
message appeared once more. I tried to log off and log in again in no
avail. So I went to the help site and called for help.
Later, I decided to reboot the computer and tried once more. This time it
worked and I continued creating. Thanks.
laozhao39

Photoshop CS6 keeps freezing when I work with large files

I've had problems with Photoshop CS6 freezing on me and giving me RAM and Scratch Disk alerts/warnings ever since I upgraded to Windows 8. This usually only happens when I work with large files, however once I work with a large file, I can't seem to work with any file at all that day. Today however I have received my first error in which Photoshop says that it has stopped working. I thought that if I post this event info about the error, it might be of some help to someone to try to help me. The log info is as follows:
General info
Faulting application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86403
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988950
Exception code: 0xe06d7363
Fault offset: 0x00014b32
Faulting process id: 0x1834
Faulting application start time: 0x01ce6664ee6acc59
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Photoshop.exe
Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
Report Id: 2e5de768-d259-11e2-be86-742f68828cd0
Faulting package full name:
Faulting package-relative application ID:
I really hope to hear from someone soon, my job requires me to work with Photoshop every day and I run into errors and bugs almost constantly and all of the help I've received so far from people in my office doesn't seem to make much difference at all. I'll be checking in regularly, so if you need any further details or need me to elaborate on anything, I should be able to get back to you fairly quickly.
Thank you.

Here you go Conroy. These are probably a mess after various attempts at getting help.

How to get exact match when working with Oracle Text?

Hi,
I'm running Oracle9i Database R2.
I would like to know how do I get exact match when working with Oracle Text.
DROP TABLE T_TEST_1;
CREATE TABLE T_TEST_1 (text VARCHAR2(30));
INSERT INTO T_TEST_1 VALUES('Management');
INSERT INTO T_TEST_1 VALUES('Busines Management Practice');
INSERT INTO T_TEST_1 VALUES('Human Resource Management');
COMMIT;
DROP INDEX T_TEST_1;
CREATE INDEX T_TEST_1_IDX ON T_TEST_1(text) INDEXTYPE IS CTXSYS.CONTEXT;
SELECT * FROM T_TEST_1 WHERE CONTAINS(text, 'Management')>0;
The above query will return 3 rows. How do I make Oracle Text to return me only the first row - which is exact match because sometimes my users need to look for exact match term.
Please advise.
Regards,
Jap.

But I would like to utilize the Oracle Text index. Don't know your db version, but if you slightly redefine your index you can achieve this (at least on my 11g instance) :
SQL> create table t_test_1 (text varchar2(30))
2 /
Table created.
SQL> insert into t_test_1 values ('Management')
2 /
1 row created.
SQL> insert into t_test_1 values ('Busines Management Practice')
2 /
1 row created.
SQL> insert into t_test_1 values ('Human Resource Management')
2 /
1 row created.
SQL>
SQL> create index t_test_1_idx on t_test_1(text) indextype is ctxsys.context filter by text
2 /
Index created.
SQL> set autotrace on explain
SQL>
SQL> select text, score (1)
2    from t_test_1
3   where contains (text, 'Management and sdata(text="Management")', 1) > 0
4 /
TEXT                             SCORE(1)
Management                              3
Execution Plan
Plan hash value: 4163886076
| Id | Operation                   | Name         | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |              |     1 |    29 |     4   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| T_TEST_1     |     1 |    29 |     4   (0)| 00:00:01 |
|* 2 |   DOMAIN INDEX              | T_TEST_1_IDX |       |       |     4   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("CTXSYS"."CONTAINS"("TEXT",'Management and
              sdata(text="Management")',1)>0)
Note
   - dynamic sampling used for this statementJust read that you indeed mentioned your db version in your first post.
Not sure though if above method is already available in 9i ...
Message was edited by:
michaels

Why Portal will be slow when we work on Theme Editor

Hi Experts,
Why Portal will be slow when we work on Theme Editor in Creating new Theme or modifying existing one.
Note: Since i have done Branding for 6 to 7 Clients i fell same , portal runs very slow.
Thanks
Vijai

Hi,
use the Eclipse Theme Editor. No need to be logged on in the portal, hence: faster. You'll only have to upload the theme afterwards to the portal.
br,
Tobias

Crashing, no 'UNDO' when working with Chinese Text

We have a number of users working in InDesign CS4 6.0.3 on Windows XP SP3. When they enter Chinese text into text boxes, frequently their UNDO command is no longer available. This basically renders files unusable. In addition to this, the application will frequently crash when working with Chinese text. The only workarounds that have sometimes worked include:
1.       Switching keyboard mapping or just selecting English to see if it affects the Undo function.
2.       Reset the preferences for InDesign.
3.       UNDO problem occurred when jumping between web browser and InDesign. Workaround was to select a menu item from within InDesign - any menu item, it didn't matter - and the key command began working again.
Has anybody else run into these problems?

Peter, have you had any problems accessing the web pages for the Release Notes? After finally digging under about 3 layers of redundant links (annoying in and of itself), the final links to Release Notes for InDesign patches 6.0.4, 6.0.5, and 6.0.6 brought me to the following:
InDesign 6.0.4 took me to InCopy 6.0.5
InDesign 6.0.5 took me to InCopy 6.0.6
InDesign 6.0.6 took me to InDesign Server CS5
I got approval to install all patches on a person's computer, but now I can't even read the warnings before doing so!

Photoshop crushes frequently when I work with just 2 or 3 layers

Hi!
I am running Photoshop CC on a PC with the following features:
Processor: Intel Core I7-4790 3.60 GHz
RAM: 8 GB
OS: Windows 8.1 64 bits
Motherboard: Asus Z97
I thought this would be more than enough to run Photoshop without problems, but it crushes frequently when I work with just 2 or 3 layers (file size of around 260 MB). I would appreciate some help to solve this problem.
Thank you!
Rui

Here is the signature of the last crash:
Nome do Evento do Problema:      APPCRASH
Nome da aplicação:                         Photoshop.exe
Versão da aplicação:                        15.2.2.310
Carimbo de Data/Hora da Aplicação:          5480338c
Nome do Módulo com Falhas:       StackHash_7a58
Versão do Módulo com Falhas:      6.3.9600.17736
Carimbo de Data/Hora do Módulo com Falhas:        550f4336
Código de exceção:                          c0000374
Desvio de Exceção:                           PCH_EA_FROM_ntdll+0x000000000009177A
Versão do SO:                                    6.3.9600.2.0.0.768.101
ID de Região:                                     2070
Informações Adicionais 1:               7a58
Informações Adicionais 2:               7a58a29a7734b44ab44abd1255b90013
Informações Adicionais 3:               f7d1
Informações Adicionais 4:               f7d1aed13889893857bf50147eb2e634

At work with the text at allocation by the cursor of the big fragment of page it is necessary to shift all time it downwards, "against the stop", but the page automatically does not start to rise upwards as occurs in other browsers. I ask the help!

After transition on Windows 7 there was a problem with Firefox. At work with the text at allocation by the cursor of the big fragment of page it is necessary to shift all time it downwards, "against the stop", but the page automatically does not start to rise upwards as it was earlier and as occurs in other browsers. It is necessary to press other hand a key "downwards" that is the extremely inconvenient. Reinstallation on earlier version (8.0) earlier irreproachably working, has given nothing. I ask the help

You need to enable the Add-ons bar (Firefox > Options or View > Toolbars; Ctrl+/) or the Find bar (Ctrl+F) to make Firefox scroll the page while selecting text.

1415 fnw printer wireless connection extremely slow or not working with OS X, works with windows

The wireless connection to the printer is either extremely slow or not working at all on OS X Yosemite. It shows up in the list of printers in Bonjour in Safari, and I can connect to parts of the web interface if I wait a very long time. However, I cannot add the printer as a new printer in System Preferences even though the printer shows up.
I have upgraded to the latest firmware. The WiFi indicator on the printer is on, "green", and it has a reserved IP showing up in my router (ComCast). It seems that Windows machines can printer to the printer wirelessly without a problem.
Any help appreciated.
Stephen
This question was solved.
View Solution.

Hello @sscotti,
I would like to assist you today with installing your wireless HP LaserJet Pro CM1415fnw Color Multifunction Printer on your Mac OS X 10.10 Computer. Now you indicate in your post that this printer works fine with Windows computers, and you are able to 'see' the Bonjour printer on your Mac. Therefore, the issue that you are experiencing is not network related. Rather, I do believe that you are experiencing a driver conflict on your Mac OS X 10.10 computer. Can I please have you run the steps below to resolve this issue.
Step 1: Uninstall Drivers and Software:
First, I'm going to have you 'clean up' your Mac OS X 10.10 computer to verify that any trace of your Laserjet printer is gone so we have a nice clean slate to work with. Please click here and when the website opens select the drop down for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for Mac OS X 10.10. Run the appropriate uninstall steps for the method in which you originally tried to install your printer: Apple Updates, or the HP Driver download.
Once the uninstall is complete, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Please click here to download the appropriate Mac OS X 10.10 drivers for your HP Laserjet printer.
Once the website opens select the 'download' button on the top left
Once the download has completed, please follow the onscreen steps to reinstall your printer.
Once the reinstall is complete, test the print and scan functions to ensure that your printer is functioning as per normal.
Please respond to this post with the result of your troubleshooting. Should you still be experiencing issues there are additional steps I can have you run through. I look forward to hearing from you. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Microsoft excel 2013 stops working and getting very slow when I work in one file

I am using windows 8.1 pro in my office and I have excel 2013,
When I'm working on excel generally there is no problem, but I have an excel file which I work on in it's too slow and stops working, I have also tried to open the same file in another computer which is having the same problem.
while I was using Office 2010 it was working very fine, I can also share my file with you if you want in order to be checked and resolved.
I appreciate if you help me,

Hi,
You can share the file with us by sending it to GBSD TN Office Information Collection [email protected] Be sure that you have the private information hidden.
Meanwhile, since it works fine in Office 2010, we can try to open the file in Excel 2010, then go to File > Options > Formulas, check if you have enabled iterative calculation. If so, uncheck the check box and switch the workbook calculation to Manually.
Then, save the changes and then open the modified excel using Excel 2013 to see the result.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How do I start Macintosh again when I worked with Microsoft (I am not using Parallel Desktops)?

I had just installed Windows Vista on my MacBook and worked with it for a while but when I wanted to switch back to Macintosh it wouldn't work. Does anyone know a solution?

Now that you are back in OSX you might ask yourself which Operating System (OS X or Windows Vista) you will use more often.
Once decided and while in OS X go to System Preferences - Startup Volume and set the default accordingly.
Stefan

Indesign crashes when I work with rectangular frames.

I just bought Adobe Creative Suite 6 Design Standard. Now Indesign CS 6 crashes when I scale a rectangle frame. All the rest works fine, only these rectangle frames can't be scaled. It's horroble.
I installed Indesgin new, I deleted the Indesign preferences, I made a totally new document and copied the stuff from the old document, I made the rectangulars totally new, but it's still the same.
Does anyone have an idea. I work on a new IMac, OS X, Version 10.9.5.
Thanks!

It might not make a difference, but what method are you using to scale the frames?
Text frames, image frames or both?
One at a time, or several, and if several, are they grouped?
By Command-dragging a handle, using the scale tool, or using the percentage fields at the top?
paulina2014 wrote:
I made a totally new document and copied the stuff from the old document…
Does it work in totally new documents that you haven't copied stuff to from the old document? If so, try copying just one item from the old doc and see if it works with that item or new items created in the new doc. It could be that one, some, or all of the elements of the old doc are bringing in some bad code. If some of the items don't cause the problem, you could use the divide-by-half method to try to find the one or ones that is/are causing the problem. It's how you would find a bad page in a long document. You try copying half of the elements and see if it fails. If it does, you try the other half (on a new document that hasn't been affected by the first try). If that one works, the problem is in the first half. If it doesn't, you may have to try in quarters, eighths, or (depending on how much time you are prepared to spend on this) one at a time. If it looks like that will take more time than starting over, that's something to consider.

When I Work With JDeveloper 12 C 12.1.2.0.0 Then My Computer Restart

Hi
I Work With JDeveloper 12C(12.1.2.0.0) (With Os Windows XP Professional sp3 /CPU Intel P4 3.2 G /ram 2 G/Graphic On Board Intel 96 DPI) On My JSF Project then Alwayes My Computer Restart
What Happen???

OK, have you tried to rename or remove the system12.1.2.x.x.x folder and start jdev again?
Jdev will recreate this folder when you start jdev the next time. If yo uare asked if you want to migrate answer 'no' as you other wise migrate the error too.
If you now can start jdev successfully you have to make changes you made to the preferences.
Timo

Can anyone confirm this adapter works with micro sd card, can anyone confirm this adapter works with micro SD card

hi all,
I would appreciate if anyone could confirm whether this adapter will work with a micro SD card? I have the adapter that converts the micro SD to normal SD, so would this adapter work:
http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit#ove rview
thanks very much

i have a helmet camera that records videos and i have been told my the manufacturers that this will work for that too?

Illustrator is slow when i work with micro text

Similar Messages

Maybe you are looking for