Illustrator Launch Error: Windows registry was not in the expected state.
Hi All,
I just upgraded to CS3 Design Premium, and I'm I'm getting the following error when I launch Illustrator:
"The Windows registry was not in the expected state. PLease run the Illustrator installer to correct this problem. Illustrator will continue to run, but may not operate properly."
I'm running Vista Ultimate x64 on a dual Xeon workstation with 4GB of RAM. I found the following article in the knowledgebase, but it did not solve the problem:
http://www.adobe.com/go/kb401602
I have also uninstalled CS2, reinstalled CS3 and reinstalled CS3 *again*.
Illustrator does run, but it's slow and unstable. Any thoughts on what's going on and what I can do to fix it? Many thanks!
--Jim.
Hello, any solution on this problem? I've got the problem with Illustrator CS3, XP where I get the registry error at startup and I can't open any .ai files on my computer from explorer. I can open the files by opening from Illustrator. Here's my registry entry:
Registry key not found: .ai
Expected string: Adobe.Illustrator.13
Registry key not found: .eps
Expected string: Adobe.Illustrator.EPS
Registry key not found: .hyp
Expected string: Adobe.Illustrator.Hyphen
Registry key not found: Adobe.Illustrator.Hyphen
Expected string: Adobe Illustrator Hyphenation Dictionary
Registry key not found: Adobe.Illustrator.Hyphen\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,4
Registry key not found: .aip
Expected string: Adobe.Illustrator.Plugin
Registry key not found: Adobe.Illustrator.Plugin
Expected string: Adobe Illustrator Plugin
Registry key not found: Adobe.Illustrator.Plugin\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,5
Registry key not found: .flt
Expected string: Adobe.Illustrator.Filter
Registry key not found: Adobe.Illustrator.Filter
Expected string: Adobe Illustrator Filter
Registry key not found: Adobe.Illustrator.Filter\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,6
Registry key not found: .dct
Expected string: Adobe.Illustrator.Dictionary
Registry key not found: Adobe.Illustrator.Dictionary
Expected string: Adobe Illustrator Spelling Dictionary
Registry key not found: Adobe.Illustrator.Dictionary\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,7
Registry key not found: .sbx
Expected string: Adobe.Illustrator.Tsume
Registry key not found: Adobe.Illustrator.Tsume
Expected string: Adobe Illustrator Tsume File
Registry key not found: Adobe.Illustrator.Tsume\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,8
Registry key not found: .aia
Expected string: Adobe.Illustrator.Action
Registry key not found: Adobe.Illustrator.Action
Expected string: Adobe Illustrator Action File
Registry key not found: Adobe.Illustrator.Action\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,10
Registry key validated: .ase
Registry key validated: Adobe.Illustrator.SwatchExchange
Registry key validated: Adobe.Illustrator.SwatchExchange\DefaultIcon
Registry key validated: .acb
Registry key validated: .acbl
Registry key validated: Adobe.Illustrator.ColorBook
Registry key validated: Adobe.Illustrator.ColorBook\DefaultIcon
Registry key validated: .8bf
Registry key validated: .8bi
Registry key validated: Adobe.Photoshop.Plugin
Registry key validated: Adobe.Photoshop.Plugin\DefaultIcon
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\ProgID
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\VersionIndependentProgID
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\LocalServer32
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\InProcHandler
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\InProcHandler32
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\verb
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\verb\-3
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\verb\-2
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\verb\-1
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\verb\0
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\AuxUserType
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\AuxUserType\2
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\AuxUserType\3
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\MiscStatus
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\MiscStatus\4
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\Insertable
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\DefaultIcon
Registry key validated: Adobe.Illustrator.13\
Registry key validated: Adobe.Illustrator.13\CLSID
Registry key validated: Adobe.Illustrator.13\Insertable
Registry key validated: Adobe.Illustrator.13\.ai\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.eps\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.prf\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.hyp\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.aip\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.flt\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.dct\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.sbx\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.8bf\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.8bi\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.aia\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.ase\DefaultIcon
Registry key validated: Adobe.Illustrator.13\DefaultIcon
Registry key validated: Adobe.Illustrator.13\shell
Registry key validated: Adobe.Illustrator.13\shell\open
Registry key validated: Adobe.Illustrator.13\shell\open\command
Registry key validated: Adobe.Illustrator.13\shell\print\command
Registry key validated: Adobe.Illustrator.13\shell\edit\command
Registry key validated: Adobe.Illustrator.13\shell\edit
Registry key not found: Adobe.Illustrator.EPS\
Expected string: Encapsulated PostScript
Registry key not found: Adobe.Illustrator.EPS\CLSID
Expected string: {CFE97CDD-836F-4c78-B6B7-A36DD433892E}
Registry key not found: Adobe.Illustrator.EPS\Insertable
Expected string:
Registry key not found: Adobe.Illustrator.EPS\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,2
Registry key not found: Adobe.Illustrator.EPS\shell
Expected string:
Registry key not found: Adobe.Illustrator.EPS\shell\open
Expected string:
Registry key not found: Adobe.Illustrator.EPS\shell\open\command
Expected string: "C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe" "%1"
Registry key not found: Adobe.Illustrator.EPS\shell\print\command
Expected string: "C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe" /p "%1"
Registry key validated: Adobe.Illustrator.EPS\shell\edit\command
Registry key validated: Adobe.Illustrator.EPS\shell\edit
Registry key not found: Adobe.Illustrator\
Expected string: Adobe Illustrator Artwork 13.0
Registry key not found: Adobe.Illustrator\CLSID
Expected string: {CFE97CDD-836F-4c78-B6B7-A36DD433892E}
Registry key not found: Adobe.Illustrator\CurVer
Expected string: Adobe.Illustrator.13
Registry key validated: Adobe.Illustrator.13\protocol
Registry key validated: Adobe.Illustrator.13\protocol\StdFileEditing
Registry key validated: Adobe.Illustrator.13\protocol\StdFileEditing\server
Registry key not found: Illustrator.Artwork\NotInsertable
Expected string:
Registry key validated: FileType\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}
Registry key validated: FileType\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\0
OK: Key not found as expected: Adobe.Illustrator.7\shellex\IconHandler
OK: Key not found as expected: Adobe.Illustrator.7\shellex\PropertySheetHandlers\AIPage
OK: Key not found as expected: Adobe.Illustrator.7\shellex\PropertySheetHandlers
OK: Key not found as expected: Adobe.Illustrator.7\shellex
OK: Key not found as expected: CLSID\{697EE7C0-334C-11D0-B826-0020AF
Similar Messages
-
I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.
I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben -
itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..
Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again. -
Whenever i open itunes after installation it says error 7 itunes was not installed correctly
whenever i open itunes after installation it says error 7 itunes was not installed correctly
For general advice see Troubleshooting issues with iTunes for Windows updates.
The section Install missing components may allow you to install Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"
Hi all,
We are having issues with Adobe Bridge working properly with Photoshop. When trying to access Bridge through Photoshop we receive the following error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"
- We have the Master Collection CS6 installed
- Bridge CS6 is working fine as a stand-alone program
- This is installed on Windows 7 x64
- I am unable to find an uninstall location for Bridge CS6, it is not under control panel > Adobe Master Suite
- All adobe products are up-to-date as of this morning.
Any help would be appreciated.
Thanks,
Message title was edited by: Brett NBacterin1 wrote:
It has not worked previously.
Does not make a difference is bridge is open or not.
Yes, we are accessing it through File/browse in bridge.
OK, back to square 1.
Does Bridge work normally? Does it load Bridge CS6 or does CS5 come up? Only one version can run at same time.
If you double click on an image it opens in CS6? -
HI. I just got a new macbook pro 15".
every time i launch garageband i get this message
"Error code 28773 was returned by the Audio driver."
when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
anyone know how to fix this?
I have installed BOOM, but i think that's the only extra sound software i have.]
PLEASE HELP!
thanks,
mojoman22Please read this whole message carefully, especially the warnings, before doing anything.
1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
Parallels
and definitely remove at least the following:
Boom
† MacKeeper
† VirusBarrier
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
Remove the "MacKeeper" crapware as follows.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it. -
trying to upgrade my ITunes for my Iphone and cannot access content. During upgrade getting message "windows installer did not finish as expected..contact vendor"
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Error message: file was skipped because the old remote file could not be deleted.. Later it will up
Error message: file was skipped because the old remote file could not be deleted.. Later it will upload after i try a few more times. Not at my size quota for website (I have lots of room) , have toggled Passive FTP ...keeps happening. Is there a way to fix this? Thanks! I am using DW CS5 on Windows 7 platform. This does not happen when I upload otherwise on my computer - only when using DW.
It also only happens with the html files - it does not happen with my jpeg filesDo you have notes in your site? DW's local and remote site synching might be off. Try clearing your cache.
http://forums.adobe.com/thread/494811
Nancy O. -
RW-00023: Error: DBC file was not created- When try to install 11i on OEL5
I got an erorr in the appl-top log file as below, also my installation wizard showing post installation checks did not succeed. Please advice.....:-)
DBC File Check
RW-00023: Error: - DBC file was not created:
File = /d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
HTTP Check
checking URL = http://oracleapp1.srini.co.uk:8000
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.Hi JD,
I am able to fix this issue.....:-) Thanks for your help JD.
As per the Metalink note 747424.1, i replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL only in DB-tier, but not in the Apps tier. So this was causing the
above issue in the instalation of oracle 11i on OEL5
--Once again i alter and replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL in both the files....
(db tier)
<DB_HOME>/appsutil/bin/adgetlnxver.sh (did it earlier)
(apps tier)
<APPL_TOP>/ad/11.5.0/bin/adgetlnxver.sh
--run the autoconfig in apps tier with completed successfully result (and also generated the DBC files)
--run the adstrtal.sh and retry the rapidwiz once more. ( Oracle Discoverer services VIS_oracleapp1 - addisctl.sh - this one is Failed)
--This time everything checked OK in the instalation wizard. -
i am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?
As I said the iTunes program on the computer. You open iTunes on the computer and go to the View menue in the upper rightand then click on preferences. Go to Devices and delete the backup.
-
Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."
Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly." I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues. I use this disk for my Time Machine backups. This always seems to happen when the computer wakes from sleep, but not consistently. The computer was asleep overnight and backed up as soon as it awakend this morning. Two hours later I get the improper ejection message. I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem. This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).
I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
I document how I discovered this in my blog post:
http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html -
Error 1046: Type was not found or was not a compile-time constant: Component Event.
Hi Everyone..
I am getting an Error 1046: Type was not found or was not a compile-time constant: Component Event.
The ComponentEvent class has been imported,and also the event handling code is there. I am not sure what else is wrong, hope somebody can advise me. Thanks. The code is below, the point where the error occurs as indicated by the compiler has been highlighted.
package
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import fl.controls.TextArea;
import fl.controls.Button;
import fl.controls.TextInput;
import flash.events.SyncEvent;
import flash.events.MouseEvent;
import flash.events.FocusEvent;
import flash.net.SharedObject;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.FocusEvent;
import flash.events.ComponentEvent;
public class VideoChat extends Sprite
private var button:Button;
private var text_so:SharedObject;
private var textArea:TextArea;
private var textInput:TextInput;
private var chatName:TextInput;
private var nc:NetConnection;
private var nsOut:NetStream;
private var nsIn:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var cam:Camera;
private var mic:Microphone;
private var vid:Video;
public function VideoChat ()
//Set up UI
textArea = new TextArea();
textArea.setSize(500,280);
textArea.move(20,54);
addChild(textArea);
textInput = new TextInput();
textInput.setSize(500,24);
textInput.move(20,340);
textInput.addEventListener(ComponentEvent.ENTER,checkKey);
addChild(textInput);
button = new Button();
button.width=50;
button.label="Send";
button.move(20,370);
button.addEventListener(MouseEvent.CLICK, sendMsg);
addChild(button);
chatName = new TextInput;
chatName.setSize (100,24);
chatName.move (80,370);
chatName.text="<Enter Name>";
chatName.addEventListener (FocusEvent.FOCUS_IN, cleanName);
addChild(chatName);
//Connect
rtmpNow="rtmp:/VideoChat ";
nc=new NetConnection;
nc.connect (rtmpNow);
nc.addEventListener(NetStatusEvent.NET_STATUS,doSO);
cam = Camera.getCamera();
mic=Microphone.getMicrophone();
//Camera Settings
cam.setKeyFrameInterval(15);
cam.setMode (240, 180, 15, false);
cam.setMotionLevel(35,3000);
cam.setQuality(40000 / 8,0);
//Microphone Settings
mic.gain = 85;
mic.rate=11;
mic.setSilenceLevel (25,1000);
mic.setUseEchoSuppression (true);
//Video Setup
vid=new Video(cam.width, cam.height);
addChild (vid);
vid.x=10, vid.y=20;
//Attach local video and camera
vid.attachCamera(cam);
private function doSO(e:NetStatusEvent):void
good=e.info.code == "NetConnection.Connect.Success";
if(good)
//Set up shared object
text_so=SharedObject.getRemote("test", nc.uri, false);
text_so.connect (nc);
text_so.addEventListener(SyncEvent.SYNC, checkSO);
private function checkSO(e:SyncEvent):void
for (var chung:uint; change<e.changeList.length; chng++)
switch(e.chageList[chng].code)
case "clear":
break;
case "success":
break;
case "change":
textArea.appendText (text_so.data.msg + "\n");
break;
private function cleanName(e:FocusEvent): void
chatName.text="";
private function sendMsg(e:MouseEvent):void
noName=(chatName.text=="<Enter Name>" || chatName.text=="");
if (noName)
textArea.appendText("You must enter your name \n");
else
text_so.setProperty("msg", chatName.text +": " + textInput.text);
textArea.appendText (chatName.text +": "+textInput.text +"\n");
textInput.text="";
private function checkKey (e:ComponentEvent):void
noName=(chatName.text=="<Enter Name>" || chatName.text=="");
if (noName)
textArea.appendText("You must enter your name \n");
else
text_so.setProperty("msg", chatName.text +": " + textInput.text);
textArea.appendText (chatName.text +": "+textInput.text +"\n");
textInput.text="";
//Create NetStream instances
private function checkConnect (e:NetStatusEvent):void
msg=e.info.code == "NetConnection.Connect.Success";
if(msg)
nsOut=new NetStream(nc);
nsIn=new NetStream(nc);
//NetStream
nsOut.attachAudio(mic);
nsOut.attachCamera(cam);
nsOut.publish("camstream");
nsIn.play("camstream");Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks.. -
TS1424 i cant open up itunes, comes up with error mcvcr80.dll was not found
help
itunes will not upgrade not can it open after re installing
i get the error mcvcr80.dll was not foundClick here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99504) -
When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."
What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.
-
Windows error message "Setup could not read the CD you inserted..."
I partitioned my Macbook HD using bootcamp assistant and allowed 32GB for the partition. Then I tried installing windows using the assistant. I only get as far as verifying the windows CD (not far as which file system to use FAT32 or NTFS). Then I receive the error message, "Setup could not read the CD you inserted, or the CD is not a vaild windows CD." I am using the Windows XP Service Pack 2 version - not an upgrade. Also I tried booting up straight to the CD but that did not help either. Any suggestions?
Please disregard my question. Although my Windows XP Pro documentation and folder did not say upgrade I just looked at the CD for the tenth time and just saw Upgrade printed on the CD. I'm not making excuses but the holographic images make the CD a little hard to read. Sorry for the trouble. I guess I will be going out and buying the full version now.
Maybe you are looking for
-
CS3 Uninstaller won't run in Lion - how to uninstall manually?
I migrated from a Snow Leopard Mac to a new Lion Mac (keeping the same username and keychain) and CS3 Web Premium runs fine, except Dreamweaver won't launch (just a blank dialog). I want to uninstall just Dreamweaver (if possible) so I can try reinst
-
I_oi_document_proxy - open_document_from_table
Hello everybody, I would like to show an intern table from ABAP in Excel and afetr change save data in table. I try to use the method i_oi_document_proxy ->open_document_from_table but it not woks correct. The data are not correct in columns and rows
-
Can VLOOKUP, OFFSET, INDEX and MATCH be used to SUM the value of cells from multiple tables?
I have a problem thats needs a sulution. I have a Spreadsheet with multiple sheets and tables. The (Truck ) Sheets each represent a "Site" and the tables within from 1-31 show inventory counts for each day of the month. Shown below are Edited example
-
I can provide a screenshot to help illustrate my problem. Every page I load has numerous ad boxes embedded into the page from "Ads by Browse to Save". Does anyone else have this problem? Is this something that firefox added to their browser or do I h
-
Is there a Mail utility to force/encourage Subject line text?
Is there a utility or product that will force/encourage me to pick from a list of "approved" Mail Subject line text? I want Subject Line to (under certain circumstances) to start with [COMPETITION: A Vendor]. And be able to pick from a list of "appr