Illustrator locks up on 2nd display (Thunderbolt).

I have been using Illustrator CC 2014 since it came out without any issues. I just opened it today and pushed it to my 2nd display (thunderbolt) which is what I typically do. When I tried to drag a file into it, it wouldn't let me. I then tried to create a new document and it locked up. I couldn't do anything with Illustrator from then on. I had to Force Quit, even though it wasn't showing that the program was unresponsive. After playing with it for a while, I found out that it would work on my laptop screen perfectly (I am using the latest version of Yosemite), but as soon as I moved it to the 2nd display it locks up.
All my other adobe programs perform perfectly when I move them to the 2nd display.
I have repaired my permissions, uninstalled and reinstalled the program several times, restarted more times than necessary with no success.
Any suggestions?

There have been a couple of issues like yours during the last week. Please do a research. One of the suggestions might work for you. It's an issue that was introduced by the 10.10.2 update.

Similar Messages

2nd apple thunderbolt display in not detected by Windows 8.1

Installed Windows 8.1 on a late 2013 Mac Pro. Have two thunderbolt displays. The 2nd display is not being detected by Windows. There is only one display listed in device manager. One display works fine, the river listed for it is Generic PNP display.
Any ideas on getting 2nd display to work in Windows 8.1?
Thanks

OMG, I was just about to buy a new wireless card because I have the same problem.
Some weeks ago my wireless adapter disappeared, the card disappeared altogether even from Device manager, after I installed a new bluetooth driver and after I was connecting to my phone 3G via USB cable.
But then it came back after I left the laptop shut down and unplugged for a whole night. It worked for a few hours and after closing the lid and opening it again wireless adapter was gone again, never to come back.
I tried changing drivers, holding the power button for 20 sec to hard reset the laptop, fresh install of Windows, load BIOS defaults, and even installing Windows 10 in VHD (dual boot) and see if it will reappear there.
Always the same - the wireless adapter doesn't exist any more.
However, buetooth has been working without problems, which I find strange.
I read online about similar situations, and all answers point that the wireless card stopped working and needs to be replaced.
But @Papelinas - you say you even bought and installed a new wireless card and STILL have the same problem???
I can't believe that something in motherboard got damaged and that only wifi doesn't work...
I've had my Y2P for 6 months, and I don't really have time to send the laptop for repair for some time, I'm using it...
I guess I'll still try to buy a new card, and just hope the wireless adapter will reappear...

2nd display connected to iMac stays black (Thunderbolt - HDMI)

Hi everyone,
with my new iMac (purchased 2 weeks ago) I have the problem that my 2nd display will stay black after I connected it to the Thunderbolt port. The display shows the blue background for a split second, then i goes black (and stays that way). I find the following lines in the log file:
Feb 15 18:18:34 Edoras Dock[157]: kCGErrorIllegalArgument: CGSCopyDisplayUUID: Invalid display 0x003f003d
Feb 15 18:18:34 Edoras Dock[157]: uuid_callback_master: failed to retrieve UUID for display 0x003f003d (1001) (invariant failure)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Feb 15 18:18:37 Edoras Terminal[513]: _NXGetScreenRect: error getting display bounds (1001)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: _NXGetScreenRect: error getting display bounds (1001)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: _NXGetScreenRect: error getting display bounds (1001)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: _NXGetScreenRect: error getting display bounds (1001)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: _NXGetScreenRect: error getting display bounds (1001)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetCurrentDisplayMode: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
The display is an AOC e2343F2, with two HDMI and one VGA port. I am using a Mini-Displayport to HDMI cable to connect the display. This worked with my Mac Pro (from 2006, AMD Radeon HD5770) without a problem.
Is this a problem with the in 10.7.x included drivers?
With the new Thunderbolt port?
I tried it with 10.7.2 and 10.7.3 on the iMac and the Mac Pro. It works like a charm on the Mac Pro, but not on the iMac. Do I need to buy the overpriced Apple adapter and can't use my adapter cable anymore?

Just a theory. Looking at the log errors you showed the system cannot get the display bounds. My theory is that the display is not able to pass the EDID (extended display identification data) through a TB port. While your 5770 could handle it the TB can't. Again, it's just my theory.
Another thing to check is your Displays system preferences. See if the Display is showing in the Arrangement tab. If so click Detect Displays and also Gather Windows to bring the second monitor's Displays preferences on to your main monitor. If you get this far then set the appropriate resolution and refresh rate (if refresh rate is shown).
If there is no Displays Arrangement tab then the system doesn't even know the second monitor is connected. I don't have a solution for this problem since I don't have TB. Although the resolution is not as good you may have to try a VGA adapter for that monitor. No guarantees that will work either of course.

ADC from vid card to a VGA 2nd display, out of stock?

We have an old quicksilver G4 800 mhz tower that a co-worker wants to have a 2nd display attached to. The card has 2 outputs, a VGA and an ADC. About a year ago, I went to our local Apple Reseller (not an apple store) and bought a ADC to VGA adaptor for 30 bucks (for another machine in use). It was by Dr. Bott. There is nothing on their website now. Dr. Bott service stated that Apple had something to do with the discontinued status? Locked down their technology?
Some site show any ADC to VGA adaptor discontinued.
What is up?
Alternatives? Should I just get a new cheap graphics card? or are there ther alternatives. Yes, this is old technology, and we will get new computers, but we will have this machine a few more years...
Thanks for any help
Mac Pro 2.66 Ghz Mac OS X (10.4.7)

Apple did not try to stop others from using ADC. They made it an open standard, but few other manufacturers used it. Formac did make a LCD display with ADC. Most display makers didn't want to make models that would only work with a Mac, even though it would be cheaper (no power supply needed). Other computer makers didn't use it because they would need bigger power supplies (Apple made a CRT with ADC that needed 113 watts), adapters would be needed for most displays, and they would need special graphics cards. Because of lack of demand from other computer makers, no graphics card maker made any ADC cards for non-Apple computers.
Apple dropped AC for several reasons:
Multiple displays were being used more, and there was only one ADC per computer. DVI to ADC adapters are expensive and messy.
They wanted to sell their displays to non-Mac users.
Bigger displays needed more power (30" needs 150 watts)
With their main customer gone, the connector maker dropped the connectors, so adapter makers have no more parts for the adapters. Adapters are now scarce and expensive, but it's not Apple's fault.
There are still a few ADC to VGA adapters for sale:
<http://www.mac-pro.com/s.nl/it.A/id.230/.f?sc=2&category=128>
<http://www.welovemacs.com/mcaadcvga.html>
If the Quicksilver is the earlier (2001) model, such as the dual 800 Mhz, the adapter won't be useful with any of the graphic cards that originally came with it. It will work with 2002 Quicksilvers, such as the single 800MHz.

Run iPhoto slideshow on 2nd display without 1st display going black?

Hi there,
I can't seem to find a clear answer on this one. I have just connected a 2nd display to my mac mini via the thunderbolt connection. When I put iPhoto 11 onto the 2nd display desktop and run a slideshow it plays on the 2nd screen but my 1st screen goes black, which isnt ideal as I want to be able to carry on working on my 1st screen.
Is iPhoto 11 able to run a slideshow on a 2nd display without 1st display going black? If not, is there a way around this by using other software?
I have the 2nd display set up in extended mode not mirror.
I am running OSX 10.9.2.
Many thanks,
Andy.

Is iPhoto 11 able to run a slideshow on a 2nd display without 1st display going black?
No.
There may well be, but it's not possible with Aperture either.
Alternatives to iPhoto's slideshow include:
iMovie is on every Mac sold.
Others, in order of price:
PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

MacBook 2nd display (mini-DVI-DVI (D)- VGA)?

I am trying to hook up a second display to my MacBook. The problem is that I don't have a mini-DVI to VGA adapter, but I have a mini-DVI to DVI, and a DVI to VGA adapters. So I connected my Apple mini-DVI to DVI, to my DVI to VGA, and then to my 2nd display (NEC LCD1560NX). The notebook's image flips as i normally connect a second display, it auto-detects the 2nd screen and displays its correct name, but I do not get an image on my second display. It set to the right resolution and frequency.
Any suggestions?

go to system preferences -> display-> and mirror the displays, it should work on the second display, but the cons on the macbook is to work on the first display, the built in card may not support the second one, if thats the case i'm sorry i can't help it. you can also try to get a DVI/VGA splitter and see if that work, it works on standard integrated intel VGA models. good luck!

I can't seem to turn off my 2nd display (with no adapter plugged in)

Been looking on the internets for ages about this and not got anywhere, so did a completely fresh install last night.
The problem is that the DVI (2nd display connection) thinks that I have a VGA display connected (i.e. the 2nd display) when I plug in the DVI-VGA adapter to use with a TV that works fine. The 2nd display resets to align itself to the TV connected.
When I disconnect the adapter the Mac resets it display. Back to having this phantom display connected.
I've plugged in the DVI-VGA adapter as well and then carefully removed that and sameroblem.
Having done a fresh install that would mean it's not a software issue, so it has to be a hardware one? Something with the actual connection? Does anyone know of any potential problems as to why this would happen?
I've tried some compressed air. (I've lost the straw so it was straight from the can, spray paint style)
Please help.
Thanks.

Anyone?

2nd Display & iMac w/ 2 Different Sets of Content from Same iMac

Can I do this? (How can I do this?) I'd like to connect a second display to my iMac and use the iMac to generate content (like live feeds or video content from CNN.com) to play on the second display while I "work" on the iMac and its screen. Thus, each display have its own content--but the content is generated by the one iMac. Could I use a HD tv as the second display?
Thanks for your guidance.
Bill

Depends on the iMac, but some of them do support this.
Look yours up at http://www.everymac.com/systems/apple/imac/index-imac.html and look for the section about displays and 2nd display support under your model.
With the second display connected to the appropriate port, you use your Displays System Preferences to configure them. If you choose "mirror" both displays show the same thing. If you choose to not mirror, you can have an "extended desktop where you can place different windows on different monitors and do exactly what you want to do. AN HD TV might be usable but you have to look up what your iMac can handle in terms of pixels and resolution and compare that to your HD TV specs. You can certainly buy inexpensive monitors to use if your HD TV is compatible.

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Connecting a 2nd display

HI,
I have a Mac Pro, circa Dec 07 (therefore no mini display port) and currently use a 23" cinema display. I want to attach another identical display and assume I can do this via the other (spare) DVI port at the back of the Mac?
However, my main monitor has the firewire and USB cables plugged into the tower which come cabled along with the DVI cable, but when connecting the 2nd display can I just connect the DVI cable into the Mac Pro and not bother with the firewire and USB cable which are bound with it?
Obviously I understand that using the firewire and USB cable from the first display increases my available ports (at the rear of the first display)... but do I really need to connect those with the 2nd display, because I'm running out of ports at the back of the Mac!
Hope that makes sense...
Thanks,
Mark

One thing that's occured to me, somebody might know...
I calibrate my main monitor, so when the second display is either being mirrored, or just an extension of the desktop, I guess the existing calibration is sufficient as the main display calls the shots?
Or am I wrong, should both be calibrated as separate displays prior to using them together?
Thanks to anybody who can help...
Mark

2nd display disappears on switching focus to another application

Hi,
I'm running LR5 on Windows. I've got the grid view on my primary display and a second display showing the loupe view.
If the focus moves to another application (i.e. a small notepad window on the primary display) then I can still see LR with its grid view in the background behind notepad on the primary display however the loupe view on the second display disappears and I can see the desktop.
Is it possible to configure LR not to automatically hide the 2nd display when the input foucs moves to a different wiindow? I'd like to be able to continue displaying the image on the 2nd display while I'm doing something else on the primary display.
I've not been able to check but I've a feeling this is new behaviour in 5, I don't think 3 or 4 did this.
Many thanks in advance for your time/help! :-)

No, sorry. I've just checked LR3 for you, and the behaviour's the same.

2nd display not as bright as first display

I have 2 facory video cards installed. They're the same (ATI 5770) each have mini ports and aldo DVI.
When I boot up each day at work, the second display won't go to full brightness. USBs are both plugged in and I do get the brightness control levers on the preferences for both displays. However, the 2nd display (at 100%) is just not as bright as the primary display. Both are the same 27" displays; each on their own dedicated video cards. I would say it is about 20% less bright.
Sometimes if I re-boot or reset SMC and monkey with it, I can get it to boot at 100% brightness but lately it's choosing on it's own to be dimmer. Switching USB ports didn't seem to have any effect. I am assuming it's a hardware issue bc I have reset PRAM, SMC, Disk Repair, trashing preferences, and so I'm a little bummed this expensive 27" LED display can't guage it's full brightness.
Thanks kindly for any input / solutions.

To post a hopefully helpful follow-up.. over past couple of days I got it to hold up its full brightness. To restore the full brightness of the 2nd display I disconnected / reconnected the display cable a few times until I noticed it was suddenly matching the full brightness of the 1st display. Is it the 2nd video card? The display? The G5 hardware/software? Can't say.
But after re-booting overnight, it retained the full brightness. Not sure why this happened/s, could be an isolated issue with something slightly defective?? Regardless, maybe this will help someone where both displays are not at full 100% brightness. Replug them a couple times to see if that tricks it back into action.
Remember, my toggles in the display prefs said both were at 100% yet the 2nd display was clearly 20% darker before I got them back to true 100%.
In the end, these LED displays are truely magnificent (aside from my isolated issue).

2nd display/monitor not working (strange problem)

hello,
I have a mac pro with this specification...
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          2 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Serial Number (system):          Y***Q2
Hardware UUID:          00000000-0000-1000-8000-0017F207E704
Display monitor Specs :
Chipset Model:          NVIDIA GeForce 7300 GT
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0393
Revision ID:          0x00a1
ROM Revision:          3008
Displays:
Cinema:
Resolution:          1680 x 1050
Pixel Depth:          32-Bit Color (ARGB8888)
Mirror:          Off
Online:          Yes
Rotation:          Supported
Cinema HD:
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Problems facing....
My cinema HD is set to primary display and Cinema as 2nd display. Everything was working fine but suddenly my 2nd display stopped working. It remains black as if its in sleep mood. The small power led light on the monitor is On(not blinking). In Graphics/Displays shows both monitors are connected. I can drag any window to the 2nd display as if its working but its still black. In display preferences it shows both monitor on arrangement section. I can even change the resolution size of both monitors.
My cinema display monitor has no problem. I have checked it already. I have swapped the DVI ports at the back of my cpu but it seems only the 2nd port is giving this problem. As if no matter what my 2nd port of graphics card is on sleep mood. I have taken it to our local apple center and both ports were working fine there, the only difference is they checked it using none apple lcd monitor. But when I brought it back to office, it had the same problem again. The strange thing is....one day while I was working the 2nd display suddenly appeared but when I restarted my mac, it went back to the same problem. Till now my 2nd display not showing anymore. I have reinstalled to new OSx but the problem remains. So can anyone pls tell me how I can solve this problem.
thanks
<Edited by Host>

only the 2nd port is giving this problem
You have an older card, and the second port is flaky. The problem follows the port.
I am sorry to be so blunt, but the problem is YOU.
No one wants to be the one to club you on the head and point out that your card is dying, and you are going to have to get a new(er) one. There is no "quick fix" for dying Hardware, and no fix at all for you when you will not connect the dots and realize your card is on its last legs.
If running 10.6.4 or later, you can install the 5770 and it will work, but not at quite the advertised speeds if your slot will only go up to 8x.

2nd Display Question?

Hi! I've been using my ibook G4 12" for a few months now, absolutely loving it.
And I want to hook up a bigger 2nd display on my ibook, so I can watch movies more comfortable, but the manual says it won't support external display more than 1024x768, is that true?
Any advice will be appreciated.
Thanks!

Sorry! Got it, SSD.

2nd Display of macbook

I've read a few things about the subject but never had a clear anwser. I've read that the maximum resolution for the 2nd display of the macbook is 1920X1200. Doesn't help me if I plan to buy a 19'' inches with a maximum of 1440 X 900. I want to use the 19'' to expend my desktop. Will it work properly (without distortion)
If you have any infos about that thank you for your answer

1440x900 is less than the MacBook's maximum resolution of 1920x1200. That means it'll work just fine as a second display at its full resolution. You just can't run a display that's larger than 1920x1200, such as Apple's 30" Cinema Display. But the 23", for example, will work fine, as will anything smaller.

Illustrator locks up on 2nd display (Thunderbolt).

Similar Messages

Maybe you are looking for