Illustrator pictures appear/disappear in InDesign CC?

I'm importing two Illustrator CC pictures into an InDesign CC file (Running Adobe CC on Mac OS X 10.8.5).
If I set my display preferences to "Normal", they show up correctly (although an imported Photoshop JPEG appears in low-res). If I put the display into "High-Quality" mode, the photo is fine, but the two Illustrator files disappear, leaving only the bounding/content boxes. If I zoom out to 25%, the Illustrator files are visible on-screen, but at any higher zoom, I get nothing.
What am I doing wrong?

I just recently experieced this issue and when importing an .AI (CC 2014) into InDesign CC 2014.  When viewed in Typical Display the proxy would appear and disappear when changed to High Quality Display (HQP).  However when Overprint Preview is turned on the .AI file will appear while in (HQP).  On a side note, while placing art with import options, the preview did not update when toggling on and off various layer's visibilty.
Trying to troubleshoot, I turned off all overprint settings for element in Illustrator and no difference. The solution that worked for me, I used a blend between three paths.  Two of the three used the uniform stroke profile but the last path used "width profile 2".  Once I changed the last path to uniform as the others, during placement, the preview worked properly and the vector art rendered correctly in all displays with and without overprint preview enabled.
I hope this helps, anyone else with their files and contributes to a more distinctive cause and quick resolution.
InDesign CC 2014
Illustrator CC 2014
Mac 10.9.5

Similar Messages

  • Appearance Palette in InDesign?

    I was wondering if there is something in InDesign that is the equivalent to the Appearance Palette for InDesign like there is in Illustrator?
    I find that applying the effects and then UN-applying them as I am experimenting for design is super clunky. It would be quicker to be able to delete an applied effect in an appearace palette like you can in Illustrator.
    Any suggestions or work arounds?
    Thanks!

    I actually just found a tip that gets pretty close.
    http://creativementor.com.au/applying-effects-via-drag-and-drop
    The effects palette pretty much does what I need. I can quickly delete an effect & the drag & drop feature is nice too.
    Check it out if interested.

  • I created a file in Photoshop CS5 (a photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When the Photoshop and Illustrator files are placed in InDesign, they look blurry - whether viewed in InDesign, printed, or saved as

    I created a file in Photoshop CS5 (a photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When the Photoshop and Illustrator files are placed in InDesign, they look blurry - whether viewed in InDesign, printed, or saved as a PDF. Can anyone give me some tips on how to fix this? Thanks!

    Ask in the program forums
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

  • When I open iPhoto5, the list (albums, trash, etc.) next to pictures has disappeared.  How do I get it back?

    When I open iPhoto5, the list (albums, trash, etc.) next to pictures has disappeared.  How can I get it back?

    You can move your cursor to the far left of the iPhoto window and grab side of the source pane and drag it open - or
    A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
    This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
    LN

  • I installed CS6 on my new retina MacBook pro laptops. InDesign and Acrobat display document pixilated. I ran the updates and it fixed Illustrator and Photosho, but not InDesign and Acrobat. What can I do to make them display in high resolution? HELP!

    I installed CS6 on my new retina MacBook pro laptops. InDesign and Acrobat display document pixilated. I ran the updates and it fixed Illustrator and Photosho, but not InDesign and Acrobat. What can I do to make them display in high resolution? HELP!

    InDesign CS6 is not optimized for retina displays. You’ll need to move to Creative Cloud for retina compatibility.

  • HT1600 at the end of a recent apple tv update, a picture appeared suggesting a connection using a micro usb connection to i believe Itunes. the apple tv did not come with a micro usb connection. What to do.

    At the end of a recent apple tv update, a picture appeared showing a connection - micro usb  - to apple itunes. I don't have this micro connection. I now can't watch apple tv. what is going on?

    Many newer cameras have the Micro USB cable you can use.
    Otherwise, you will need to buy one to restore your Apple TV.

  • Help!! ALL of a sudden I cannot open ANY of my pictures in iPhoto. I have clicked the iPhoto icon on my dock, as I always have done, but no pictures appear. Can anybody out there help me???? Thank you!

    Help!! ALL of a sudden I cannot open ANY of my pictures in iPhoto. I have clicked the iPhoto icon on my dock, as I always have done, but no pictures appear. Can anybody out there help me???? Thank you!

    What does appear?

  • I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
    /Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
    Now launch InDesign and see if the problems are resolved.
    If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
    Let me know if any of these suggestions work for you
    I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

  • HT3919 In the past was able to adjust the memory for each individual application, my Illustrator CS5 appears is doesn't have enough memory to complete a particular project. How do I boost the amount of memory that Illustrator uses so I can complete my pro

    In the past I have always been able to adjust the memory of each individual application,
    my Adobe Illustrator CS5 appears that is doesn't have enough memory to complete a particular project.
    How do I boost the amount of memory that Illustrator uses so I can complete my project?

    With OS X, it automatically allocates RAM and it can't be allocated manually.
    What model Mac do you have and what OS X version is it running. Your profile shows a PowerMac and OS 10.6.8. A PowerMac can't run OS 10.6.8. It's max OS is 10.5.x
    How much RAM is installed in your Mac? You need to max out the RAM and close other open apps if you are having problems with Illustrator.
     Cheers, Tom

  • I have an older version of imovie.  After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

    I have a five year old version of imovie that generally works fine.  However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom.  Any suggestions?

    Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
    Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
    See here:
    Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
    Let us know how that works for you.

  • 46YL863: Changing TV channels - delay before new picture appears

    Hope someone can advise me please on an 'issue' that's recently arisen with my 46YL863 TV.
    I say 'issue' rather than problem in case it's something to do with my settings that is causing this.
    When I change TV channels I'm noticing that there is a several second delay from the current picture to the new one. I've narrowed it down to it only happening when switching from an HD channel to an SD one, or from an SD to an HD.
    In these circumstances the screen first goes black, then blue and after a couple more seconds the new channel picture appears.
    Changing between HD channels or SD channels and the new picture appears almost immediately.
    This has not been happening prior to the last couple of days, so either a fault has developed or I've changed a setting somehow.
    I've tried other HDMI input sockets and situation is the same.
    Any suggestions please?
    Thanks.

    Further, I've now noticed that when playing back a recording from my Humax box, before the programme plays I get a few seconds of black screen before the picture appears. That didn't happen before. Don't know therefore if the problem's with my TV or the Humax Foxsat box.

  • Small black squares appear/disappear when I used the down key

    Small black squares appear/disappear when I used the down key-particulary when on FB, but also at other times

    No, there is no yellow star on any of the entries. Each entry has the site's (or company's) logo, as well as the name of the site and URL. There is nothing more in each entry.

  • A small picture appears next an item

    Hi,
    I want to make a list of things, when I move the mouse over an item, a small picture appears next to it. when I click on an item it sends me to another scene _page_ within the flash.
    I tried several ways but I couldnt figure it out.
    as you noticed I am a beginner, so can you please explain it in details!
    please I need help!
    Thank you.

    Thank u but can you please explain in a more detailed way
    i selected the button and wrote as u told me but it didnt work
    on (release) {
    intro.onRollOver = function() {
      rosee._visible = true;
    intro.onRollOut = function() {
      rosee._visible = false;
    yourbutton.onRelease = function() {
      _root.gotoAndStop("scene2");
    is there a problem?

  • How do I change email so pictures appear instead of links and code

    how do I change email settings so pictures appear instead of links and code?
    Also how do I change settings to get .doc attachments instead of win.dat attachments?

    I advise you to look at your code and ask yourself if it's efficient. What is you wan to add a few numbers to your program? You'll have to add a lot of lines of code.
    Ah well, here's the answer to your question (partially):
        double sum = (one+two+three+four+five+six+seven+eight+nine+ten+eleven+twelve+thirteen);
        double mean = (sum / 13);
    //...

  • I want to turn a slideshow into a book, exactly as the pictures appear in the slideshow

    I want to turn a 292 picture slideshow into a 100 page book, exactly as the pictures appear in the slideshow.  When I create the book the pictures are not in the order of the slideshow.  How do I fix this?  thanks

    The book imports the photos based on creation date.  If you have your photos in an album in the order you want them select them all and go to the Photos ➙ Batch Change ➙ Date menu option. Add 1 minute between each photo:
    Do not modify the original files.
    Now when you create a new book with those photos they will be ordered in the order you had them in that album.
    OT

Maybe you are looking for