Illustrator saving vectors with different attributes than assigned prior to saving

I am having a problem whenever I save a document in Illustrator.
Near the edges of the page, I am placing a few rectangular vectors filled in only with black.
When I save the image as a .pdf, two of these get changed.
One on top, and one on bottom, at the exact same x placement.
Prior to saving, they are all completely identical with the same attributes.
I even deleted the old ones, replaced them with new ones, which I copied from other marks that were not messing up, and saved the .ai file as a .pdf again, but to no avail.
Please help as I have no idea what to do to fix this.
I have tried unchecking save as an illustrator editable file, save with layers, etc.
Any advice would be greatly appreciated.

BeeHiver wrote:
Well, I believe that it is simply the way that adobe was displaying it, because if I zoom in on the .pdf file, the added thickness disappears.
The same thing happens when I have the letter I in text, not sure why this happens, but I no longer think it is an issue.
That letter 'l' looking thicker is a known issue with a PDF file... as you've noticed, it clears up when you zoom in and also, it doesn't print like that...

Similar Messages

BYOD Solution with different product than Cisco ISE

Hello,
Will it possible to make BYOD WiFi with different product than cisco ISE? such as Dell ClearPass or some sort of other product which does support Cisco WLC 5508.
Regards,

Sure it's possible... Dell resells Aruba's ClearPass, so really it's up to the vendor implementing ClearPass to understand what is possible or not. Both ISE and ClearPass does OnBoarding, which is used for BYOD. Both require licenses for this added feature also. There might be other ways to achieved BYOD, but it depends in what you want and what the product can do.

Moveing average price after posting invoice with different value than GR

Hello all
I have a question as in subject.
If I will post goods receipt and after this I would like to post an invoice in MIRO with different value than in goods receipt , the MAP on my stock will change about this different???

Hi,
Your MAP will get recalculated as the price difference will change the total value of the stock and the stock quantity will remain the same
MAP=Total value/Total stock
Hope this will help you
Reward if useful
Thanx and Regards
SHYAM.R

Items in the shopping cart appear with different price than in the catalog

Hi All,
We are running SRM 5.0 (Classic Scenario) with external catalogues.
After selecting items from the external catalogue and transferring them to the shopping cart, the items appear with different price(the problem exists in the productive system)
The strange thing is that there is no dependence or sequence between the differences. For example, in one shopping cart, one item is with correct price, the price of the other item is not correct (when I click on the icon which is showing item details in the catalogue, the price is different than the one in the shopping cart). Sometimes the difference is significant, sometimes not - if the item price in the catalogue is 22.34 EUR, in the shopping cart is 21.22EUR or if the item is 45.62EUR in the shopping cart is 45.60 EUR. There is no logic.
I tried to create a shopping cart in the support system, with the same items from this catalogue, and they are sent back in SRM with the correct prices.
I traced all OCI parameters, sent from the supplier catalogue, and everything is correct.
At the example given below the price in the shopping cart ordered in the productive system is 69.00CZK, and after that during the test the correct price of 73.870CZK has appeared.
NEW_ITEM-DESCRIPTION==Durable-KeyClip-keytag%2C+black
NEW_ITEM-MATNR==
NEW_ITEM-MATGROUP==
NEW_ITEM-QUANTITY==10
NEW_ITEM-UNIT==EA
NEW_ITEM-PRICE==73.870
NEW_ITEM-PRICEUNIT==1
NEW_ITEM-CURRENCY==CZK
NEW_ITEM-NEW_ITEM-LEADTIME==1
NEW_ITEM-VENDOR==
NEW_ITEM-VENDORMAT==0176%2F1957001
NEW_ITEM-MANUFACTCODE==
NEW_ITEM-MANUFACTMAT==
NEW_ITEM-CONTRACT==
NEW_ITEM-CONTRACT_ITEM==
NEW_ITEM-SERVICE==
NEW_ITEM-EXT_QUOTE_ID==
NEW_ITEM-EXT_QUOTE_ITEM==
NEW_ITEM-EXT_PRODUCT_ID==23109
NEW_ITEM-EXT_SCHEMA_TYPE==UNSPSC
NEW_ITEM-EXT_CATEGORY_ID==55121504
NEW_ITEM-LONGTEXT_1%3A132==Durable-KeyClip%0D%0Akeytag%2Cblack%0D%0A%0D%0A6pc
I checked the error log in SLG1 for BBP_OCI, and no error message exists. In my opinion the problem can be in supplier system, because otherwise all items will be with wrong price. And at the moment, there are shopping carts in which all items are with the correct price!
It is not something in the user profile, because in one shopping cart created by one user some items are correct, some of them not.
I also checked with the supplier, they said that they haven't change the price, recently.
Has somebody of you met this problem?
In the IMG-> Define External Web Services (Catalogs, Vendor Lists etc.) I have set all parameters for the standard call structure: the URL of the supplier, our company ID and password for their catalogue.
In the Detail view for the catalogue, the following parameters are set
u201CAdditional functions in the product catalogueu201D field:
-     Display product data again in the catalogue
-     Validate product data from SAP Enterprise Buyer
-     Find supply sources
u201CTechnical Settingsu201D field
- Use Error Log
Thanks,
Desi

That means that we are not maintaining material numbers in SRM, so there are no predefined price or info records for that materials in R/3 system, or in SRM.
In the set up of external catalogues, validation of the price is set. Which means that, if a new shopping cart is created from already existing one, and meanwhile, a change of the price is done by the supplier in the catalogue, the new item price will be adopted in the shopping cart.
No prices are maintained in the SRM system, everything is from the supplier catalogue.
Desi

Wny does ACR 7.3 open a .JPG with different dimensions than PS 13.0.1 x64?

I have a .jpg file that opens in Photoshop 13.0.1 x64 as an image with dimensions of 5588 x 4627 pixels. If I set Photoshop to open it in ACR 7.3 it opens with dimensions 4453 x 4418 with the image looking squished horizontally and cropped at the top.
I captured the image on a Nikon D600. I developed the NEF with DxO Optics Pro 8.1.1 and output a TIFF. I opened the TIFF in Photoshop (without using ACR) and did my editing including some transformation to create mirrored wrap for a canvas. There are versions saved as PSDs. I resized the image for output and used PS to create a JPG. That JPG causes the strange (to me) behavior when Photoshop tries to open the file.
I used the same PSD to create multiple JPGs with differing levels of quality (varyiing from 9MB to 27MB). Photoshop exhibits the same behavior on all of them.
If I process the JPG thruough ACR, the resultant image retains the bad dimensions and distortions.
The Adobe "chat" preresentative said this was expected behavior in a 2+ hour chat. He/she said that they were able to replicate the different dimensions on their end with their images.
Does anyone know if this is normal behavior? If so, why?
Has anyone experienced something similar?
Thanks,
Joe
I am running this on Win7 x64 Home Premium with 8 GB RAM. I also have LR 4.3 installed on the computer and previously used it to process the same NEF file.

I sent the JPG to a service for a print on canvas. They reported that the image was not the proper size and shape when they opened it in Photoshop. Unfortunately I have not been able to get them to tell me what pixel size it was, just rough inches (!?!?!). So I started trying things in Photoshop and came up with this strange behavior that might explain the problem at the service.

How do i sync my iphone with different contact than what i have on my ipod

how do i sync my new iphone with a different contanct than what i have on my ipod

See these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141

Siri comes up with different results than google maps

I was doing a search for Food Lion through Siri but she wasn't finding the one right around the corner from my house. I went into maps and it found it no problem. Why do they come up with different results? I thought Siri searched google maps.

Because Apple maps is NOT google maps.

BOM line item with different plant than header item.

Hi friends,
Can we have different plants for BOM child items?
For example,BOM is created for plant 1000 with 5 sub items. when sales order is created BOM expodes with 5 sub items with plant 1000 because BOM is maintained for plant 1000.
do we make any settings that line item should pick other than plant 1000?
Please let me know is it possible in standard SAP? if not, how can we acheive it?
Thanks in advance for your solution.
Regards,
Ravinder

Ravinder Reddy ,
Scenario 1:
I have tried this scenario, I am having one header material (plant 1000). I have created one sub material 1100001 of plant (1000) and another material 340771 (Plant 2000) and i have assigned Item Category = N then i entered qty for ist item =1
it is throwing an error. "Material 340771 not maintained in plant 2000." at sub item level
Scenario 2:
In another scenario, if I am having one header material (plant 2000). I have created one sub material 1100001 of plant (1000) and another material 340771 (Plant 2000) and i have assigned Item Category = N then i entered qty for ist item =1
It is throwing an error "Material 1100001 not maintained in plant 2000." at hedaer level
Scenario 3: I have extended the materials for both the plants
Here i am entering the material header material 12345 (plant 2000). I have created one sub material 1100001 of plant (1000) and another material 340771 (Plant 2000) and i have assigned Item Category = N then i entered qty for ist item =1
It is picking up...
Material has to be extended to the plants that you are using let it be at sub item level or header level. Material has to be extended.
Regards
Sathya

In MIRO,more than one PO with different vendors than also system is posting

Dear All,
When in MIRO, vendor invoice is posting with reference to more than one PO's and if vendors are different in PO's then also system is posting vendor invoice and in this case, system is considering vendor of first mentioned PO and posting the document. This is error found to be in factory business process and need to be controlled immediately, otherwise any repercussions can be faced in future.
Can anyone advice how to control this.
Thanks
Madhukar Mittal

Hi,
The system will take over the invoicing party from the first PO and
ignore the invoice party from other POs.
You can see it in Detail tab in MIRo (or in MIR4). This is standard funktionality.
Please check the information from the following notes.
393431
458692
Best regards
Erika

HT201263 how to sync ipad with different computer than first synced

How can I sync my ipad to a new computer than originally synced with?

If you no longer have the other computer read these instructions. It contains everything that you need to know.
https://discussions.apple.com/docs/DOC-3141

How to run terminal with different locales than system default?

I use fi_FI,UTF-8 as default, and I want have one window in tmux that would use iso-8859-1. If I type command "export LANG="fi_FI.iso88591"" in term, it won't change or atleast doesn't work properly. But if I start new instance of xterm (or other terminal) from this term, locales work correctly there. If I take utf-8 support off from tmux it makes the problem little bit different. It will show scandinavian alphabets (å, ö, ä) correctly but adds futile space after letter. I tried to fiddle with .bashrc, but it didn't get me any further either.

hadrons123 wrote:
wunjo wrote:I use fi_FI,UTF-8 as default, and I want have one window in tmux that would use iso-8859-1. If I type command "export LANG="fi_FI.iso88591"" in term, it won't change or atleast doesn't work properly. But if I start new instance of xterm (or other terminal) from this term, locales work correctly there. If I take utf-8 support off from tmux it makes the problem little bit different. It will show scandinavian alphabets (å, ö, ä) correctly but adds futile space after letter. I tried to fiddle with .bashrc, but it didn't get me any further either.
I don't think the command is i right.
see the wiki for setting locale
https://wiki.archlinux.org/index.php/Locale
I don't understand what could be wrong here? fi_FI.iso88591 is how it is typed when I write "locale -a"
C
POSIX
en_US
en_US.iso88591
en_US.utf8
fi_FI
fi_FI.iso88591
fi_FI.iso885915@euro
fi_FI.utf8
fi_FI@euro
finnish
and it doesn't have any difference is it in "" or not, and yes according to your link I should be use LANG variable

Possible to configure HLS segments with different URL than governing M3U8 playlist?

Currently we have 4 AMS servers with VOD applications for RTMPe and HLSe. These are load balanced by round-robin DNS, such that any request to VOD content could hit one of 4 servers depending on the DNS record served (DNS TTL=5mins).
RTMPe works fine 100% of the time. We are having intermittent issues with HLSe and IOS devices in that randomly the stream will stop in our player (Brightcove based). Player logs seem to indicate requests to HLSe segments showing as not found/error when the content freeze occurs.
My initial guess is that requests to VOD content may come from one AMS server and contain segment URLS also based on the DNS round robin hostname, then potential mid-playlist the DNS updates and you request the next segments from another server, potentially causing issues(??).
e.g.
Playlist:
http://DNS-RR-HOSTNAME/mycontent.m3u8 - DNS resolves to AMS01, playlist served by AMS01
Segments:
http://DNS-RR-HOSTNAME/mycontent-seg01.ts - served by AMS01
http://DNS-RR-HOSTNAME/mycontent-seg02.ts - served by AMS01
http://DNS-RR-HOSTNAME/mycontent-seg03.ts - served by AMS01 (DNS flips to AMS02).
http://DNS-RR-HOSTNAME/mycontent-seg04.ts - served by AMS02
http://DNS-RR-HOSTNAME/mycontent-seg05.ts - served by AMS02
Could this situation potentially cause player to halt playout? Is it possible to configure AMS to serve the HLS segments using a different hostname, whilst still being able to serve the playlist from the DNS RR hostname. This way the playlist would return a list of segments direct from the server that served the initial playlist. e.g.
Playlist:
http://DNS-RR-HOSTNAME/mycontent.m3u8 - DNS resolves to AMS01, playlist served by AMS01
AMS01 serves segments with hostname of itself only:
Segments:
http://AMS01-DIRECT-HOSTNAME/mycontent-seg01.ts
http://AMS01-DIRECT-HOSTNAME/mycontent-seg02.ts
http://AMS01-DIRECT-HOSTNAME/mycontent-seg03.ts
http://AMS01-DIRECT-HOSTNAME/mycontent-seg04.ts
http://AMS01-DIRECT-HOSTNAME/mycontent-seg05.ts
Playlist:
http://DNS-RR-HOSTNAME/mycontent.m3u8 - DNS resolves to AMS02, playlist served by AMS02
AMS02 serves segments with hostname of itself only:
Segments:
http://AMS02-DIRECT-HOSTNAME/mycontent-seg01.ts
http://AMS02-DIRECT-HOSTNAME/mycontent-seg02.ts
http://AMS02-DIRECT-HOSTNAME/mycontent-seg03.ts
http://AMS02-DIRECT-HOSTNAME/mycontent-seg04.ts
http://AMS02-DIRECT-HOSTNAME/mycontent-seg05.ts

the link http://localhost/awstats/awstats.pl started opening.
the problem was the permission of the directories in /usr/share/webapps/awstats/ i changes 755 then it started working

Creating dynamic Text in Flex with different attributes

I am creating a Text field in Flex that looks like this:
<mx:HBox id="lastInfo" styleName="InfoBar" width="100%" visible="false">
 <mx:Text text="Your last question was:" styleName="underlined"/>
 <mx:Text id="lastQuestion" styleName="bold"/>
 <mx:Text text="Within context:"/>
 <mx:Text id="lastContext" styleName="bold"/>
 <mx:Text text="The last answer(s):" styleName="underlined"/>
 <mx:Text id="lastAnswers" styleName="bold"/>
</mx:HBox>
The text that is not dynamic needs to be underlined. The text that come up dynamically needs to be bold.
lastQuestion, lastContext and lastAnswers are populated dynamically. The problem is that if lastAnswers width goes beyond the threshold of the HBox it doesn't carriage return back to the beginning of the complete string.
How can I create this complete string dynamically and with underlines and bold text all into one Text so it will carriage return to the beginning?

Hi Cootis,
Now I understood your question but the approach you are using is not correct I think because in order to format the way you wanted you need to use only a single <mx:Text/> control and assign the htmlText dynamically.
See the sample code below:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="init();">
<mx:Script>
<![CDATA[
private var lastQuestion:String = "What is your name.";
 private var lastContext:String = "Your name";
 private var lastAnswers:String = "John John John JohnJohn JohnJohn JohnJohn JohnJohn JohnJohn JohnJohn John";
public function init():void
 variableText.htmlText = "Your last question was:" + lastQuestion + "Within context:" + lastContext + "The last answer(s):" + lastAnswers;
]]>
</mx:Script>
<mx:HBox id="lastInfo" styleName="InfoBar" width="450" visible="true">
 <mx:Text id="variableText" width="100%" />
</mx:HBox>
</mx:Application>
So you need to pouplate the variables dynamically that's it.
Hope this works for you.
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

Illustrator files printing in different sizes than was specified..

Hi there,
I am having a problem with some labels I have been making. I specify that I want the document to be 6.5 cm x 10 cm, and after I have laid them out in a page and printed them, I find that they are too big to fit on the surface I measured for. Does anyone know what is going on?

By how much is the measurement off? What is the printed size of your 6.5 x 10 rectangle?
What sort of printer are you using?
I don't recall having had this problem unless I'd done something daft.

Sequences with different attributes

I am editing a wedding and decided to brek up each major portion. I now have four sequences. When copied sequence two into seguence one, the footage from sequence two. The canvas size was the same at 50%, however the image size from sequence two ws very small in the canvas. The same happened with my other sequences.
The purposes of putting joining the sequences was to put the whole project together. What did I do wrong? Am I not supposed to copy and paste from sequence to sequence?
Please advise.
The easy setup is set to DV/Panasonic DVCPro

Lots of moving parts, but never say never. From what you indicate in your last post, at least part of the material is HD.
You want to do at least two things: get everything into a single editing ceodec (AIC), and conform the clips/sequences to a common frame rate. Same frame size would be nice, but not as important as the codec and rate.
I think your best approach would be to choose the format (size and frame rate) that the majority of your movie was shot in and create a new project and an AIC sequence with those settings. Then you could export your four finished sequences, conform as necessary and reimport them into your project as clips. You would finish and export as QT, current settings (AIC) and you'd have a movie file that could be re-purposed for DVD, the Web, projection, mobile, etc.
If you are able to buy ($49) and learn Compressor, it can do this very well. If you intend to do these sort of projects fairly often, the tool would be worth the investment of $ and time.
The other way would be to export using Quick Time Conversion.
Of course, there's always the option of starting all over and re-importing the footage…
It's been a while since I worked with FCE, amd perhaps someone else will chime in and point out some options that I'm over-looking.
Good luck.
Russ

Illustrator saving vectors with different attributes than assigned prior to saving

Similar Messages

Maybe you are looking for