Illustrator suddenly not recognizing font

I have been placing pdf's with text of font styles Cambria Math and SansSerif and all was going fine until suddenly I got an error warning which read:
The font Cambria#20Math is missing. Affected text will be displayed using a substitute font.
The font SansSerif,Bold is missing. Affected text will be displayed using a substitute font.
Any help be much appreciated!

mdlj,
There have been some threads about rather strange font issues lately, such as these:
http://forums.adobe.com/thread/1315743?tstart=0

Similar Messages

Ipod shuffle 2nd gen suddenly not recognized by itunes, any ideas?

My 2nd gen shuffle is suddenly not recognized by itunes, all troubleshooting done per apple support, ie make sure cords plugged firmly, try all usb ports, try different cord etc... any ideas?

Hello,
I had a similar problem. I posted my problem in this link:
http://discussions.apple.com/thread.jspa?threadID=836301&tstart=0
Would you read that and see if it sounds like something you're experiencing? If so maybe we can both scream for help on here at the same time, and get some answers!

Windows PC suddenly not recognizing iPhone. Recognizes another iPhone just fine. USB works until operating system in PC (XP) loads. Any clues out there?

Windows suddenly not recognizing iPhone, yet recognizes another iPhone fine (sees in iTunes, etc.) USB appears to be fine - passes electrical to iPhone until operating system (XP) boots, and then "disconnects". I've gone through all of Apples suggestions for troubleshooting - including msconfig. Same result - quick double "bong" tone and no connectivity to iTunes. Versions are all up-to-date.
Any suggestions out there?

How did you get the VMWare sync to work? I hate Apple at this point.

My Illustrator is not recognizing that I am signed into Adobe and thus my Kuler panel is not enabled.

My Illustrator is not recognizing that I am signed into Adobe and thus my Kuler panel is not enabled.

DT,
You may try to restart the Creative Cloud application by quitting and relaunching it.

Mail is suddenly not recognizing my password. it has done this now and then for a few minutes, but this time it's been days. anything I can do?

mail is suddenly not recognizing my password. it has done this now and then for a few minutes, but this time it's been days. anything I can do?

try resetting your phone by turning it off and back on again. The servers may still be having a hard time keeping up, so you may just need to wait a little while and try again.

Flash 8 not recognizing fonts

I'm experiencing difficulties with Flash 8 not recognizing
the majority of a font family.
Its strange because Photoshop & Illustrator recognize
them & display them just fine.
The fonts involved my project include:
Helvetica
Helvetica Compressed
Helvetica Condensed
Helvetica Black
Helvetica Light
Helvetica Extra Compressed
Helvetica LT Std
Helvetica Neue
Helvetica Ultra Compressed
Of this list, Flash 8 is only recognizing:
Helvetica
Helvetica LT Std
Helvetica Neue
So at this point I'm having to literally type EVERYTHING out
in Illustrator, export swfs, and import them into Flash.
This is obviously time consuming and makes simple text
changes a pain.
I'm leaning towards the fact that this is a corrupt font
issue, yet these fonts are available in every other software I've
tried them in.
Has anyone else experienced this issue?
Any thoughts??
Thank you!!!
-eric

I was having the same problem, with other fonts. I tried what brianimator suggested and it made it worse. Half of my fonts are now again gone. I can't take this anymore... worse of all, verdana is still MIA.
Those fonts are all in system/library/fonts, they just don't work with Flash and only Flash. I'm ready to shoot myself soon. I don't know what else to try. Any ideas, anyone?
PS: I have an iMAC OSX 10.5.7 and I run Adobe CS4 (fonts are recognized in all other applications)
N.

External Hard Drive suddenly not recognized

I have a WD 500GB external hard drive that I use to back up my data. I only have one hard drive as I'm currently living abroad and couldn't bring a 2nd with me.
I plugged in my external last night to back up my MacBook Pro and it backed everything up. I even went into Time Machine to go back and restore a file or two and that worked without problem. I have been using this drive for about a year to back up everything on my Mac and, although sensitive, it seems to work okay.
I plugged it in this morning and nothing. My Mac will not recognize that the drive is not plugged in in Time Machine or in Finder. If I go to Apple Logo > About This Mac > More Info... > Storage tab, it just shows my internal hard drive and my CD/DVD drive. If I click on Disk Utility with the drive plugged in, it shows my Hard Drive (Macintosh HD) with two icons, one inset below the other and both in black font, and then my external hard drive has two underneath, but only the top one is black font - the one underneath is greyed out.
It goes like this:
250.06 GB Hitachi...
     Macintosh HD
500.08 GB WD My Passport
     Time Machine Backups (greyed out)
Superdrive (greyed out)
When I clicked on the 500GB one and told it to repair/verify it said the disk was working fine. I tried unplugging and replugging in the drive (it is not recognized in Finder so I could not properly eject the disk). I restarted my Mac with it unplugged and plugged it in afterward and nothing.
The HD itself is working, the light is blinking (not solid) and I can feel the hard drive spinning, but I'm at a loss as to what to do to get my Mac to recognize it again.
Any suggestions would be helpful.
Thank you!

I also wanted to add, when I click on the greyed out Time Machine hard drive that's listed and then click "Info", this is what it says:
Name : Time Machine Backups
Type :           Partition
          Disk Identifier :           disk1s2
          Mount Point :           Not mounted
          File System :           Mac OS Extended (Journaled)
          Connection Bus :           USB
          Device Tree :           IODeviceTree:/PCI0@0/EHC2@6,1
          Writable :           Yes
          Universal Unique Identifier :           56EF6088-FFCE-300B-81D7-3E0986532AB5
          Capacity :           499.74 GB (499,735,552,000 Bytes)
          Owners Enabled :           No
          Can Turn Owners Off :           Yes
          Can Be Formatted :           Yes
          Bootable :           Yes
          Supports Journaling :           Yes
          Journaled :           No
          Disk Number :           1
          Partition Number :           2

USB suddenly not recognizing devices

Hello,
I have a problem.
My MacBook Pro suddenly stopped recognizing usb devices. This morning everything was working fine, but for some reason a couple of hours later it's not working anymore.
I can connect my phone via usb and it's reloading the battery. I can't get into my files though, while I was able to do that this morning.
My MaKey MaKey also gets power and the lights flash. I can use it to play an online game. It isn't being recognized as an usb device though, and I can't upload new code to it.
I haven't changed anything between the point it was working and the point it is not working anymore.
The only change is that I've tried to connect my MaKey MaKey and upload code to it. But that didn't work, because it said there was nothing connected to my usb port. That's how I found out that it was broken.
I have tried resetting my PRAM and SMC but it both didn't help.

Thanks for your answer.
I already tried the things listed in the link you sent, but unfortunately they didn't work.
However, a few hours after I posted my question things started working again. I can connect my phone again, and the MaKey MaKey shows up in the USB list if you go to About this Mac. Still can't upload anything to it though.
But I guess my problem is solved.

Computer suddenly not recognizing device

My computer is not recognizing my iPhone 5 when I plug it in to transfer purchases and update. I have had the phone for awhile and it was working just fine.

Great! It's not the first thing you think of, but my philosophy is "when in doubt, reboot." What probably happened is the AppleMobileDeviceService crashed. This is the easiest way to restart it.

Z2 suddenly Not recognizing the SIM and no signal.

When I'm using data for straight for like 2 or 3 hours, the phone suddenly stops recognizing the SIM and it shows no coverage. I have to restart the phone all the time :/

For hardware issues you think you may have you are best to either return your device to the place of purchase or contact Xperia care and have it inspected http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

MuVo TX suddenly not recogni

Hello All I'm hoping someone here has an idea. I just tried by MuVo Tx Fm on my WindowsXP computer for the first time after loading the latest drivers. XP deli'vers a message saying the USB device has failed and is nto recognized. When I click on the message, it says no drivers are installed (when I insert my old MuVo CD, . I get a message saying a newer version of the driver is installed,and it terminates) I then plugged it into my Win98 comptuer (the one I've been using with it), and the players does not show up in device manager. The player IS working. I can listen to anything that's already loaded. When I plug it into either computer, I see the connection image on the player LCD screen , although the screen is NOT lit up. Since the player is not recognized by either computer, I cannot upload files (music or otherwise).Any ideas Thanks. Anthony Giorgianni
Message Edited by Giorgianni on -6-200704:28 PM

I got mine woking. This what I did.
First I did not followed the recovery instructions.
If you installed the Device Recovery Mode drivers uninstal and reboot pc.
I did downloaded the MStorage_PCDRV_LB__07_00_250.exe (link is in recovery sticky) just to have the latest drivers.
Plug the MuVo TX FM to your pc usb.
When the install wizards appears do nothing.
Unplug MuVo.
Close wizard.
Plug MuVo again to your pc usb.
Run the firmware update (Go to download section to get it). Gi've it a minute (more or less).
The upgrade process will do something, I don't know what it is that recognizes the Muvo (The Muvo turns on).
Follow instruction on screen.
BTW your Muvo will be formated, keep this in mind if you have important info in it.
I hope this hel
ps.
I went thru a lot of trial and error so I may have missed a step.Message Edited by jibaro009 on 0-09-2006 06:22 PM

Windows suddenly not recognizing iPod Shuffle - drive letter conflict

If you're having troubles with your PC not recognizing your Shuffle even though it used to recognize it in the past, this is just something else to consider (sorry if it's already been covered):
When I originally connected my Shuffle to my laptop on my home network, it was recognized immediately, and my WinXP OS assigned it the drive letter "I". Later, with the Shuffle no longer connected to the laptop, I was setting up my home network, and I mapped one of my shared network locations to the "I" drive letter on my laptop. The next time I plugged my Shuffle in, Windows would not recognize it. I proceeded to plug it into both of the other computers on my home network, and it was recognized immediately on both of them. So I then went back to the original laptop, disconnected the network drive mapping I had set up for "I". Once I did that, when I plugged my Shuffle back in, the Shuffle was again being recognized immediately (not surprisingly, still as drive letter "I"). In short, Windows has a memory of drive mappings made in the past, and sometimes this can produce unexpected or unwanted behavior (I would have expected my Shuffle to automatically be assigned the next open drive letter, but alas, that was not the case in my experience).
To minimize the possibility of running into this problem again (in case I do more network drive mapping in the future), I used the Disk Management utility in WinXP to change/force the Shuffle's drive letter on my laptop to be "Z" (right click on My Computer and choose Manage, then look for the Disk Management module - you probably will need Admin rights to do this, but I haven't confirmed that).
PC Windows XP Pro

Had this happening too, had a very old cable, tried a new cable and it worked great. My ipod was showing up in itunes, but not in windows (or in device manager). When I tried to use the utility to copy files from my ipod to my hard drive I couldn't do it (wonderful utility getsharepod.com). The new cable solved the problem!

Itunes all of a sudden not recognizing ipod connection

just an hour before this happened i made an update to my ipod then this happend. i re-installed the ipod and itunes software, but nothing. this ipod is really aggrevating me b/c u expect less hassle from a $300 product.
please help!!

is your ipod functioning normally?
if itunes is not recognizing it, read the following:
http://docs.info.apple.com/article.html?artnum=61711

Illustrator CS2 Suddenly not Recognizing Arial Narrow Fonts

I created a graphic earlier today that used Arial Narrow Bold Italic. Later on today I had to update the graphic with new information and now it is telling me I don't have the font installed. The Arial Narrow fonts are in the fonts folder and are recognized by all other CS apps, Office apps, etc. I have replaced the fonts countless times since getting this message, restarted my computer, all to no avail. I eventually had to go to another computer to do the update. I even tried copying the fonts from that computer to mine and I still get the same error in Illustrator.
I don't know what the heck happened. I didn't install any new fonts between the time I made the graphic and the time I tried to update it. Do I need to re-install Illustrator? I need to know ASAP, as I will be updating this graphic tomorrow and of course would still like to use Arial Narrow in Illustrator.
Thanks in advance for any help.
Btw, I'm on WinXP SP2.

I had the same problem when I upgraded to CS3. Haven't explored the reasoning behind it but did try resetting (deleting) several PREF files, reinstalling the font, but nothing changed. I did find the following: Select ARIAL font and under FONT STYLE select the NARROW option. This will be give you the equivalent of NARROW REGULAR but there are no direct style options for italic, bold, or bold italic. Since I don't use the font that much, my only work around was to apply a stroke of .15-.25pt to the text for bold and a 20° shear for italic.
If anybody's got a answer to why ARIAL NARROW got wrapped as a font style of ARIAL and not just a font, such ARIAL BLACK, etc., it would be greatly appreciated.

FW CS4 Win7 x64: Font Suddenly Not Recognized

Weird issue that I'm hoping someone can help with. I have a family of TrueType fonts that I've been using across various CS4 projects for a while, and now, suddenly, none of the fonts are available within Fireworks CS4. They still show up in the Font menu, but selecting them doesn't change any on-screen text, and the font menu always reverts back to the previous selection (usually Arial). The fonts still work fine in Photoshop, Illustrator, and InDesign, as well as MS Office and other non-Adobe apps. It's just Fireworks that has suddenly decided to stop recognizing them.
I've deinstalled the fonts and reinstalled a new fresh copy -- no change. Restarted multiple times -- nothing.
Is there maybe a Fireworks font-related prefs file that's been corrupted or something? I really need to get some work done, and with so many of my base design projects built in FW, I'm kinda stuck.
Any ideas?

I confirm he is a blond wanna be.
function(){return A.apply(null,[this].concat($A(arguments)))}
Hudechrome wrote:
It won't work for me. I never used Vista.
(I will neither confirm or deny I am a blonde!)
Thanks for sharing.

Illustrator suddenly not recognizing font

Similar Messages

Maybe you are looking for