Illustrator to indesign problems

Hi, I am having trouble bringing in a drawing from illustrator into indesign, I have bought many drawings in from the same doc and no problem, just one small drawing which is part of a larger illustrator file is giving me an error message, it says EPS error, invalid restore, any suggestions ? I have been trying to copy and past. Thanks Carmen

I'm not familiar with Mac OS X and my customer is having exactly the same problem. It prints some files perfectly, but cannot print from f.ex Illustrator. How did you solve the problem?
Thank You in advance

Similar Messages

CS3 Illustrator and Indesign problems

I am still using CS3 and have recently reinstalled (uninstalled from old comp) onto a new computer with double the capacity - now 8GB 64 bit OS Wind 7 Prof. Since it has been on the new computer both Illustrator and Indesign close down on opening. Indesign I haven't been able to use successfully, but I am using Illustrator, slowly and patiently. The message on Indesign is basically the same each time, 'No virtual memory, free up memory' or similar. Illustrator opens asking to relink/replace all images & graphic, but closes down each time I try to relink through this prompt. What I do is 'ignore' and then manually relink. This seems to work for awhile, then goes into 'Illustrator Not Responding' will either freeze or close down, either way I loose what I have just done.
What can the problem be, apart from it being CS3, no use saying I need to upgrade, because the company will not do that. Do I need to download a patch or update etc. Help, getting a little impatient with it all.
Cheers
Donna

Short answer: CS3 is not tested and not certified to run on Win 7. Therefore, at the riosk of sounding rude, as far as Adobe is concerned, your problems are your own. There are no patches or magic buttons to push. All you can hope is to maximize compatibility by turning off UAC, using compatibility mode for Win XP, running with admin privileges and so on. Talk to your IT department/ person. If you can provide exact system info and the crash details, we may be able to advise further.
Working with your Operating System’s Tools
Mylenium

Printing problem with Epson R290 Illustrator and inDesign

I am running CS2 on Leopard and have recently purchased an Epson R290. The first time I used it with Illustrator and InDesign it worked fine but now whenever I print anything it prints a tiny version (about a sixth of the real size) of the design in the top left corner of the page. It does this both with new documents and old ones that used to print ok.

Since I posted the message about this problem I have discovered that it can be worked around by choosing a higher quality print. ie if you choose plain paper when printing from Illustrator or InDesign the printer prints a reduced size image but if you choose Ink jet mat or glossy the print comes out fine. I don't have this problem with Photoshop but that may be that I always print high quality from that application. I don't use Appleworks Draw so don't know whether this solves the problem for that application but iWork documents print ok.

Problems installing Illustrator and Indesign from CS3 suite

I am trying to install Illustrator and Indesign from CS3 suite. Previously I had been running a trial version on my Mac, and now am trying to install the suite from the original install discs. I have gone through the process of uninstalling all of the Adobe programs and then reinstalling. When the install disc loads up and I get to the point where it lists the programs to install, in the top box Illustrator and Indesign are listed as already being installed and have no option to install them. When I search my computer there are no Illustrator or Indesign applications. I am able to reinstall the rest of the suite and it seems to work fine but can't seem to figure out what step I'm missing as far as reinstalling Illustrator and Indesign are concerned.

I haven't tried doing it on Vista but I would recommend looking for
Adobe clean up programs. The problem I had was that the computer had
a trial version and then I tried to install the full version and it
wouldn't let me install illustrator because there were some random
illustrator files that conflicted with the installation process. I
ran clean up program and it removed all adobe files. Then I
reinstalled photoshop. Before you start running clean up programs
make sure you back everything up. Good luck

Problem with update Photoshop, Illustrator and Indesign CS6

Hi all. I have problem with update Photoshop, Illustrator and Indesign CS6 on OSx 10.8.4. Application are OK but update (bug fixies) not working. Update failed. (U44M1P7)

Hi El Gondo,
The following might explain and help solve the problem...
U44M1P7 - Updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manage r-update.html
Thanks!
Ankit

Smart objects from Illustrator and Indesign dimensions problem

I have been trying to find an answer to this problem for 6 months now and surprised no one else has tried to find any answers.
When we import something from illustrator or indesign as a smart object, for some reason the objects width and height will not keep their dimensions in proportion.
When the asset is first imported as a smart object it says the width and height are exactly 100%. However after that if you try to change the dimensions they will be out of proportion, usually the width will be 100% but the height will be out by about 1% to begin with. When you scale up, the percentages fall further and further apart. See image attached.
This has become a real problem for our workflow as the creative director insists we must correct every layer which has this issue by typing in the sizes manually, but then this doesnt always fix the problem either depending on which version of photoshop you are using.
Why does this happen, and how can we fix it for good?
Thanks, Chris.

JJMack wrote:
SAS_Creative wrote:
When we import something from illustrator or indesign as a smart object, for some reason the objects width and height will not keep their dimensions in proportion.
I do not have the answer for I don't have illustrator and indesign. I do have Photoshop and have notice that it try to match resolutions and maintain sizes but it may also scale placed object etc. There are some some Photoshop preferences setting that can effect some operations. Photoshop also has support for non square pixels.
Make some test if illustrator and indesign have setting for pixel aspect ratio and DPI resolution. Make sure all documents have the same pixel aspect ratio and same DPI resolution and that the vector object to be imported are not larger then the Photoshop document their being imported to.
Thanks for the suggestions, but none of these would be the answer. Illustrator is Vector so it does not use DPI / Pixel aspect ratios etc.

I have a CC student membership for one year, but I can only download trial versions of for example illustrator and indesign (30 days). How do I solve this problem?

I have a CC student membership for one year, but I can only download trial versions of for example illustrator and indesign (30 days). How do I solve this problem?

If there is no billing issue,
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If you use Photoshop at all, you may need to install the latest update to resolve this issue. See this blog post for more information:
http://blogs.adobe.com/crawlspace/2013/01/photoshop-13-0-413-1-2-updat es-now-available.html
If you do not have Photoshop, then try the solution that others have mentioned previously:
Open the Adobe Application Manager (AAM).
If applicable, let AAM complete any automatic updates and restart itself.
Sign in with your Adobe ID. (Optionally, you can close AAM at this point.)
Open a CS6 application (e.g. InDesign CC).
If prompted (e.g. you get the trial screen), click "License This Software" and sign in with your Adobe ID.
Refer to: Re: Top Ten Questions About Creative Cloud
creative cloud software says my free trial has expired, but I have a paid subscription
Regards
Rajshree

Question: is it possible to recover an InDesign file that will not open. the problem came by copying a pictogram vector illustrator to indesign. My file indesign does not want to open it now. Thank you

Question: is it possible to recover an InDesign file that will not open. the problem came by copying a pictogram vector illustrator to indesign. My file indesign does not want to open it now. Thank you

You can try the script mentioned in #1 here: Re: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK.
Here's how to install a script: http://indesignsecrets.com/how-to-install-a-script-in-indesign-that-you-found-in-a-forum-o r-blog-post.php

Adobe Illustrator and InDesign CS5 crash when trying to place images. Happens around 5+ times a day.

Hi there
This Mac is quite new and was originally a migration (using Migration Assistant) from an older Mac.
Illustrator and InDesign in CS5 were both crashing often and most of the time it's when placing an image (in either application) – it doesn't crash each time I try to place an image, but 90% of the crashes are when placing an image.
We tried lots of things, like cleaning out the fonts, clearing font caches etc. After several months of that, we decided to wipe the Mac clean and start from scratch. It has been reformatted with a clean install of the OS and only minimal additional software added. Although quite a few fonts have been reinstalled, they all validate in Font Book.
One other thing of note is that the Adobe Updater fails to complete an update and so we have had to update each application manually from the Adobe website.
I would be so grateful someone could help shed some light on what is going on. Here's an EtreCheck report. Can also provide crash reports from the Console if useful.
Thanks!
EtreCheck version: 2.0.6 (91)
Report generated 28 October 2014 13:33:49 GMT
Hardware Information: ℹ️
    iMac (21.5-inch, Late 2013) (Verified)
    iMac - model: iMac14,1
    1 2.7 GHz Intel Core i5 CPU: 4-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
    Intel Iris Pro -
        S22D300 spdisplays_1080p
        iMac 1920 x 1080
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: one day 4:4:52
Disk Information: ℹ️
    APPLE HDD ST1000LM024 disk0 : (1 TB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (848.81 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple, Inc. Keyboard Hub
        Apple Inc. Apple Keyboard
    EPSON EPSON Scanner
    Apple Inc. MacBook Air SuperDrive
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.CS5ServiceManager.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [invalid?]    com.adobe.SwitchBoard.plist Support
    [running]    com.backblaze.bzserv.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [running]    com.backblaze.bzbmenu.plist Support
    [not loaded]    com.spotify.webhelper.plist Support
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    MagicPrefs 2 (48)    Application (/Users/[redacted]/.Trash/MagicPrefs 2 (48).app)
    Spotify    Application (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
    AdobePDFViewer: Version: 9.5.5 Support
    Default Browser: Version: 537 - SDK 10.9
    SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
3rd Party Preference Panes: ℹ️
    Backblaze Backup Support
    Flash Player Support
    Growl Support
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 999.35 GB Disk used: 150.53 GB
    Destinations:
        TimeMachine [Network]
        Total size: 599.66 GB
        Total number of backups: 52
        Oldest backup: 2014-07-03 13:25:07 +0000
        Last backup: 2014-10-28 12:28:22 +0000
        Size of backup disk: Adequate
            Backup size 599.66 GB > (Disk used 150.53 GB X 3)
Top Processes by CPU: ℹ️
         2%    WindowServer
         1%    Adobe Photoshop CS5
         0%    bzfilelist
         0%    bzbmenu
         0%    fontd
Top Processes by Memory: ℹ️
    1.31 GB    Adobe Photoshop CS5
    610 MB    Adobe InDesign CS5
    490 MB    firefox
    292 MB    Finder
    215 MB    WindowServer
Virtual Memory Information: ℹ️
    90 MB    Free RAM
    3.19 GB    Active RAM
    3.28 GB    Inactive RAM
    996 MB    Wired RAM
    10.36 GB    Page-ins
    192 MB    Page-outs

Thanks, I will do.
I posted it here because this is happening on a clean drive/clean install and I have 10 other macs (including some of the same model) all running OS X 10.9.5/Adobe CS5 and not having this problem.

Adobe Illustrator and InDesign CS5 crash when trying to place images.

Hi there
My Mac is quite new and was originally a migration (using Migration Assistant) from an older Mac.
Illustrator and InDesign in CS5 were both crashing often and most of the time it's when placing an image (in either application) – it doesn't crash each time I try to place an image, but 90% of the crashes are when placing an image.
We tried lots of things, like cleaning out the fonts, clearing font caches etc. After several months of that, we decided to wipe the Mac clean and start from scratch. It has been reformatted with a clean install of the OS and only minimal additional software added. Although quite a few fonts have been reinstalled, they all validate in Font Book. I've also done a full Memtest which passed all the test.
One other thing of note is that the Adobe Updater fails to complete an update and so we have had to update each application manually from the Adobe website.
I would be so grateful someone could help shed some light on what is going on. Here's an EtreCheck report – couldn't post it on here for some reason, but I have it on a post in Apple Community Forums, here... https://discussions.apple.com/message/26970885?ac_cid=op123456. Can also provide crash reports from the Console if useful.
Thanks in advance. Any ideas gratefully received – I've run out!
ps. I have 10 colleagues with same OS version and CS5 (some even have the exact same model of Mac). They don't have this issue.

Thanks, I will do.
I posted it here because this is happening on a clean drive/clean install and I have 10 other macs (including some of the same model) all running OS X 10.9.5/Adobe CS5 and not having this problem.

My CC, Illustrator and InDesign don't open

My CC app, Illustrator and Indesign don't open.
They just don't respond to anything. And the CC app doesn't appear on my dock. Adobe Manager doesn't work either. the only program that works is premiere.
NO problem appers on screen, they just don't respond.
What should I do?What can I do?Please help.
Mac OS X v. 10.7.5 2.2 GHz Intel Core i7, 4 GB

Hi C_maf,
As a testing purpose could you please try opening the applications in root account: http://support.apple.com/kb/ht1528 and let us know if still the same issue.
Regards,
Romit Sinha

Adobe Illustrator and InDesign Error code 16 - Help!!!!

I installed Adobe Illustrator and InDesign on Windows 8.1. They worked great until I closed the programs and tried to open them up again. I now get the error code 16. I re-installed several times now and each time I close either one of the programs and reopen, I get the same error code 16. I've done a clean uninstall and re-install and I've followed the procedures about ensuring that file permissions were correct. No luck.
Please Help!!!!!!
Nothing works.
Frustrated architect

NOOOOOO!!!!
Thank YOU, for:
Immediately responding and knowledgibly resolving my problem with ZERO
GRIEF to me!
I value that more than you can appreciate!!
Have a great day!!
Art

Illustrator and Indesign Shutting down when trying to print?

Wondering why my illustrator and indesign is shutting down when I try to print from those programs. I don't even get to a printing menu. Just got a new mac....Mac OSX 10.7.3 and using the same Creative Suite 4 I used on old machine and never had this problem....is it the newer operating system? What can I do?

Remove the following files and back them up:
[Hard Drive]/Library/Printers/PPDs/contents/Resources/en.lproj
[Hard Drive]/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj
[Hard Drive]/Library/Printers/PPDs/contents/Resources/Ja.lproj
[Hard Drive]/Library/Printers/PPDs/contents/Resources/ko.lproj
[Hard Drive]/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj

Jagged vector graphics from Illustrator in Indesign

Using CS3, Leopard, have all updates.
I'm having problems with vector graphics created in Illustrator getting jagged when dragged from Illustrator to Indesign (or copied and pasted or placed as Illustrator file). They look jagged (stair stepped) in InDesign, also in Acrobat after exporting a pdf, and after printing. The vector image in question is a rectangle with rounded corners with an "Envelope Distort - make with warp" applied to it. Is the problem that I'm trying to drag an envelope distorted graphic into InDesign? Are there settings to make this work?

"They look jagged (stair stepped) in InDesign, also in Acrobat after exporting a pdf, and after printing."
Doesn't sound like a screen preview issue to me.
If a placed AI file has jagged edges on print and in PDF, but looks good in Illy, then something is amiss. Your transparency settings could be set to rasterize the line art. Make sure you're using one of the canned flattener presets (high, med, low) if there is any transparency in your page (little checkered icon by the page icon in the page palette).
J

Copy & Paste from Illustrator to InDesign CS4

Hi,
I am aware that there are issues when copying/pasting from Illustrator to InDesign, in particular:
http://help.adobe.com/en_US/InDesign/6.0/WSa285fff53dea4f8617383751001ea8cb3f-6bdda.html
I have the following problems:
1- I copy and paste text from Illustrator to InDesign on the same platform and some (not all) of the text is converted to outline in InDesign. The same font is available to both applications. Why this behaviour?
2- I copy and paste objects containing text from Illustrator to InDesign and some of the objects appear to have moved respective positions when pasted into InDesign. Is this to be expected?
Are there solutions to these problems? Note that if I expand everything in Illustrator prior to copying and pasting into InDesign, none of these issues occur, but everything is obviously in outline form, with the limitations it entails.
My clipboard settings are as indicated in the link above, but I have tried other settings with no more luck.
(Important: Before pasting a graphic, make sure that Illustrator is configured to copy as AICB (see Illustrator Help). In InDesign, make sure that Prefer PDF When Pasting isn’t selected in the Clipboard Handling preferences. If these options aren’t set properly, the Illustrator graphic cannot be edited in InDesign.)
It is not practical for me to create an Illustrator file for each of the Illustrator graphics and import those files via Place into InDesign. I must use Copy/Paste.
I use CS4.
Thanks.

You can copy/paste from Illy to ID by selecting the text with the type tool in Illy and then pasting it into ID. You will not be able to maintain the formatting. If you want to maintain the appearance the text will be converted to outlines.
If you need to get anything other than very simple objects from Illy to ID then you should save as AI and use the file > place command to place those objects as linked graphics into ID.
Your closing statement is irrelevant. Whether you like it or not, this is the way it is.
Bob

Illustrator to indesign problems

Similar Messages

Maybe you are looking for