Illustrator upgrade question (5 to 6)

I have an older Mac Mini. Version 1.1. I can't upgrade the OS further than 10.6.8. I need to upgrade from Illustrator 5 to Illustrator 6. I can't use the Creative Cloud option as I need a later release of the OS (which won't run on my machine). I have looked to see if there is a traditional software upgrade available (you pay to upgrade your existing software rather than purchase a whole new application). I can't find the option anywhere.  Can someone point me in the right direction - or am I doomed?

Creative Suite 6
Mylenium

Similar Messages

  • Illustrator upgrade question

    I have a number of Adobe applications installed that I purchased separately:  Illustrator 9, Acrobat Pro 8, Photoshop 6, InDesign CS3 and Dreamweaver CS4.  I can't tell by the Adobe site if I am eligible to upgrade to the newest version of all of these by just purchasing the CS5 Design Premium Upgrade package, or if I need to purchase the CS5 Design Premium Full package because Illustrator is so old.
    If anyone can answer this question I would be most grateful.

    Thanks Jacob.  I'm stumped as to why (you can go to a page on the Adobe site that will ask you what applications you have) when I put checkmarks in the boxes for the individual applications I have, and click the button for "show me my upgrade options", it lists the CS5 Design Premium Upgrade package as an option.
    I guess the other half of my question is, does the upgrade package ask for a previous version serial number for each application in the upgrade package?
    Thanks again!

  • Security upgrade question - Getting 6.1.6 downloaded to iphone.

    Security upgrade question - I have a 4S phone v6.01 with an upgrade to IOS 7.04 already downloaded and ready for install.  I would like to install the 6.1.6 security upgrade instead. How do I delete the ios7 in the queue or have the 6.1.1 pushed as an option to the phone?

    You can't install iOS 6.1.6 on that device and must update it to 7.0.6.
    (101120)

  • Short cut command, shift, Z use to launch esko workflow in CS6 illustrator upgraded to CC dent work

    short cut command, shift, Z use to launch esko workflow in CS6 illustrator upgraded to CC dent work

    Then you changed it in CS6. The normal preset usage for that preset is to Redo an Undo.

  • I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available

    I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available it included HDR & Panoramic photo merge. I cant find these. Where do I find them.

    well that was a big waste of my time & data allowance then ...
    I live in a flaky slow internet area & I keep my photo edit machine off the internet unless & want to update something. CC is no use to me & that useless update just used up a 12th of my allowance for the year ...

  • Another RAM upgrade question

    Hi everyone,
    I know there seems to be lots of RAM upgrade questions here but hey thats what forums are for.
    I'm looking to upgrade my macbook's RAM it's currently got 2GB (2x1GB)
    Is it possible to purchase 1x4GB and put that with one of my current 1GB sticks to create a total of 5GB?
    I would be interested to know if this is possible or if anyone has tried it.
    Thanks in advance
    Scott

    This will work if your MacBook is late '07 or newer.

  • I am using a licensed CS3 Chinese Version and Illustrator shows question mark on the menu bar. iMac,

    I am using a licensed CS3 Chinese Version and Illustrator shows question mark on the menu bar.
    iMac, OS X Mountain Lion (10.8.2)

    $$$/_MBAR/Mnu showing in Menu Bar - IllustratorHints
    Mylenium

  • Illustrator 10.0 file corruption + upgrade question

    Hi. I'm using Adobe Illustrator 10.0 and have since it came out. However, it's had a chronic corruption bug that results in files becoming uneditable- I cannot save, rename, move or delete them, which makes things a little frustrating. I have amassed quite the collection of frozen files, and many many 'save as copy' files. I am told the 'file is open in another application.' I *have* uninstalled/reinstalled Illustrator, used this copy of Illustrator on Windows XP, Vista and 7 and encountered the same bug in all three, restarted in safe mode and still been unable to edit the files, altered the folder properties from read-only to not-read-only and it's had zero effect. The only way I've found to get rid of the corrupted files is a wipe/reformat, which seems a bit extreme.
    Also, as 10.0 is unlikely to work well with the next computer I get, is it still possible to upgrade to newer versions of Illustrator? I work a lot in locations that do not have internet access, so using the online subscription option for Illustrator is unfeasable for me and I'd prefer to purchase a full download/hard copy. I've read on other websites that I can upgrade to CS4, but as even CS4 is 'old' by today's standards I'd be interested to know if that's still possible or if I've missed my window of opportunity.

    Thanks for taking the time to answer my questions. I'm asuming this file here--> https://www.adobe.com/support/downloads/thankyou.jsp?ftpID=1870&fileID=1879 is the one you're refering to? I'll give it a try.
    And am I understanding you correctly that 'no discount from 10' means no discount for any new Adobe products, not just cc? If so, I'll look for a second-hand copy of an earlier version. Are there any concerns I should be aware of in purchasing second-hand copies of Adobe products?

  • Upgrading Question, not specifically Illustrator (Mac)

    Hi,
    I currently run the CS3 Web Premium suite on a QuadCore Intel Mac. 10.5.8. This is an upgrade from CS, and then from CS2. I am purchasing the CS5 Design Premium upgrade.
    (I didn't do the previous upgrading, so i have no idea how it works, what happens, steps involved, etc.)
    My question is this. I want to purchase a laptop. How do I install the new CS5 upgrade on the laptop? Do I have to go way, way back to my original CS, install it, "upgrade' it to CS2, upgrade it to CS3, then do the CS5 upgrade? Or do I just directly install the CS5?
    Sorry if this is pretty basic, or if it should be posted elsewhere.
    Thanks for any help.

    To install on a second system, you need the CS5 DVDs and their serial number, and the serial number of your original full version purchase.  There's no need to install any older versions if you don't want them installed. All you need is the serial number.

  • Adode Illustrator 10 upgrade question !!!

    Okay to upgrade to version10 do I need to have the previous version disc ? Or just the software installed.
    Thank you

    Yes.
    If you have v9 Installed, the upgrade installer will see it.
    If you do not have v9 installed, the upgrade installer will ask for the v9 serial number.
    Then.. it will ask for the v10 serial number.

  • Windows 2003 SP2 upgrade question in regards to OSS 30478

    We are currently running our production system on a windows 2003 sp1 two-node cluster with SQL 2005.
    I would like to get it upgraded to SP2, but I have a question on OSS note 30478.
    There is a sentence in there stating:
    -Special features with Service Packs for Windows Server 2003 in the cluster:
    Service Pack 2: Before you import Support Package on platform x86_64, you must replace SAP resource DLL on both cluster nodes with the most current version.
    Can someone elaborate on "replace SAP resources DLL on both cluster nodes"?
    Does that just mean I need to upgrade the Kernel to the latest version?
    It seems to be a fairly bold statement with very vague instructions.  Anyways any guidance would be appreciated.

    for more details see note <a href="http://service.sap.com/sap/support/notes/1043592">1043592</a>
    peter

  • Satellite L50-A-19N HDD upgrade question

    Hi,
    I would like to upgrade the standard HGST HDD to a faster Seagate SSHD, and the problem is that in this model L50-A-19N there is no HDD cover, the whole laptop bottom must be removed like in this Link: [Video|http://www.youtube.com/watch?v=IG0lW7t92bI]
    My question is can I upgrade the Disk by Myself and if not what can I do to replace the Disk not losing the warranty. I read the manual for this model and there is nothing about HDD upgrades there.
    Regards.

    Usually on most notebook models HDD is placed at the bottom and access to it is not complicated. As you can see on your notebook model it is not so easy and HDD exchange is not supported. With other words it should not be done by notebook owner.
    Valid warranty is very important so please don't do anything on your own. HDD exchange in your case can be done by authorized service provider. If they do this warranty will not be cancelled.
    Contact nearest Toshiba service provider and ask for help. Addresses and phone numbers you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
    Good luck

  • Mid 2009 MacBook Pro 13 Hard Drive Upgrade Questions

    I bought an upgraded hard drive for my mid-2009 MBP 13. I've done some reading and it appears that my model of MBP shouldn't have drive issues, but I still have a few questions that I'm hoping someone will answer. Perhaps this will all boil down to a little knowledge is a dangerous thing. That is, I may be worried without good reason. If so, I apologize ahead of time.
    MacBook Pro 5,5
    2.26 GHz
    4GB RAM
    10.6.3
    Firmware version is: EFI64
    The stock drive is a TOSHIBA MK1655GSXF (160 GB):
    The new hard drive is the Western Digital Scorpio Blue 500 GB 5400 RPM drive.
    I noticed that the temperature seemed to spike after installing the new drive. I didn't get the temperature of the hard drive before I took it out, but the CPU was consistently around 170 degrees Fahrenheit and the fan was in the 2,800-2,900 RPM range.
    After putting the stock drive back in the MBP, the temps are consistently 142-145 degrees F for the CPU and 95-97 degrees F for the hard drive. The fan is right around 2,000 RPM.
    I've read a bit about outrageous load cycles and just wanted to check the numbers.
    The WD Scorpio Blue around 4,055 after 27 power on hours.
    The stock drive was at last count, at 206701 after 2215 power on hours.
    The machine is doing comparable things, downloading podcasts, Time Machine backups, browsing, etc.
    The general questions, I have are:
    Is the temperature supposed to spike like that when handling a larger drive?
    If so, what is a reasonable range? I know I don't have the temperature of the new drive, but if I knew what to expect, I guess I would be more confident putting the new drive back in and not returning it.
    What's a normal/healthy/reasonable (don't really know the term I'm grasping for) load cycle to see? I divided the load cycles by the number of power on hours and get around 150 for the WD and 93 for the Toshiba. Are either of those outrageously good or bad? I haven't been able to tell in my reading.
    The bottom-line questions are:
    Am I just overreacting based on what I've read? Or, is something not kosher and should I return the new drive and get something else? Should I try hdapm or something? If I should return the drive, any recommendations?
    I've talked your collective ear off, I'm sure.
    Thank you in advance for your responses.
    Cheers,
    Rob

    For what it's worth I've put aftermarket 7200 rpm hard drives in 2006 and 2008 15" MBP's and also a WD Scorpio Black 320GB in a 2009 13" MBP 2.53GHz and have had no changes in cpu temp or fan speed. Your fan speeds and cpu temp with the new drive sound too high. Something else is going on here. The temp is not supposed to spike when handling a larger drive. Maybe it's something like
    Spotlight indexing the new drive? Have a look at your Activity Monitor for an active process drawing resources with the new drive.

  • Visual Studio 2005/2008 and Crystal Reports versions/upgrade questions.

    I've tried posting this question on the MSDN forums and gotten no response. 
    I've downloaded and installed VS 2008 Beta 2.   The versions on the Crystal Reports files included are 10.5.0.1806  
    I'm currently using VS 2005, with the included Crystal Reports.  The versions on those files are 10.2.0.xxxx.  I've created an desktop app (in VB) which stores it's data in a database and uses the CR 10 runtime merge modules to generate a report.
    I was considering upgrading the Crystal Reports version to XI.  I would like to allow customers to modify my delivered report with their own licensed copy of CR XI.  I am not providing any functionality within my app to create or modify the delivered .rpt or use it outside my application.
    Questions:
    Do I need to update the runtime files to CR XI to support rpt files modified with CR XI?  Current runtime files are being delivered with the CR 10 merge module.
    I see a Crystal Reports for Visual Studio upgrade to CR XI. 
    Can I update the merge modules to CR XI and still use the CR for VS2005 for development?
    Does it make any sense to update CR for VS 2005?  Or to get the full CR XI Developer edition?  My usage of CR functionality is very limited.
    Would there be any benefit to waiting for the release of VS 2008?   How does that change the scenario?
    How does Crystal Reports for Visual Studio fit in with the Crystal Reports Lifecycle?  It's not mentioned on Business Objects End of Life Dates page . Crystal 10 has a Patch EOL of 31-Dec-07.   Does this apply to CR for VS 2005?  Where does 10.5 fit in?
    My main concern is allowing customers with CR XI to change the format of my delivered .rpt to run with my app.  Adding their company name, logo, etc.   My testing show a CR XI report still works with my current app.  But, going forward, what should I deliver and what do I need to use to continue development?

    To use Reports designed in XI, you need to use XI or higher runtime, running them in older versions may work, but you may encounter unforeseen issues doing so.
    If you are to use VS2005 for development you need to use XI Release 2 (11.5) runtime.
    If you are going to use VS2008 for development you need to use Crystal Reports 2008 with Service Pack 0.
    The support end of life for versions of Crystal Reports bundled with Visual Studio are linked to what Microsoft's lifecycle for the product is.  Generally if there is a workaround for the issue that is simple enough, there will not be a patch created.
    The changes you are expecting the customer to do can be accomplished with our RAS SDK which is available without using enterprise starting with Crystal Reports XIR2 SP2.

  • Ultimate 3B Monitoring Prorated Upgrade Questions!?

    I recently enrolled in the 3 Credit Bureau Monitoring for $24.99/Month on June 24 (almost 3 weeks ago). I got a message at the bottom of my Dashboard saying I could upgrade to the 3B Ultimate at a prorated price, since it hasn't been a month. It says you get a fresh report from all 3 Credit Bureaus quarterly, which is worth the extra $5/month for me, so I am going to do it here in the next 24-48 hours.... But my question is will it provide a "newer" or more accurate score than what I already have? It says that they have to pull the information again, and my score has been on a great climb in the 3 weeks I've been enrolled. I've got some things that haven't updated on Transunion FICO, but have on the other 2. Any help/experience is greatly appreciated!

    Just want to give an update. It's been about 1 week and I've had no problems. Signing in and out of Win 7 is very fast. Much better than with XP. Even though I have a slower hard drive with Windows 7 (5400 RPM) vs Windows XP (7200 RPM), Windows 7 is faster. Startup time is about the same, but shutdown is a lot faster, just like signing and out and logging in and out.
    Wireless LAN (WLAN) configuration was painless and has worked well. It automatically reconnects when I boot and does not drop my connection when i stay logged in but switch users (this happened to me on XP with the IBM Access software).
    It has been well worth the upgrade so far.
    Systems I use: T42P, T61P, Y510, A600

Maybe you are looking for