Illustrator: Using pen tool or brush tool?

Hello,
I'd like to trace my pencil sketch in Illustrator, or inking. Some tuts advice to use a pen tool but some tuts recommend to use a brush tool - which one I should use and why? I think using the pen tool is very slow way to trace (It's taking hours!) but I need advice to set the brush tool settings working like I would use a pen on paper. A line of brush tool leaves too thin ending or too rounded etc.
If someone could help me and tell, I'd be very happy for that. Thank you.

Tsuya,
I think using the pen tool is very slow way to trace (It's taking hours!)
I think it's very slow way to do that
Three things that may speed up tracing are practice, knowing where to place the Anchor Points and how long to drag out Handles (both of which may be built up through try and fail, sorry practising), and a special cheat.
The special cheat consists of pressing the Spacebar to lock the Handles and move the current Anchor Point about. You can switch back and forth quickly and make the crucial mutual adjustment of position and shape while tracing.
It is worth really working on where to place the Anchor Points; you may be surprised so trying beyond what would seem likely is important.

Similar Messages

Why is the brush tool in Illustrator CC inferior to the brush tool in CS6? It has less control of fidelity and smoothness. It is terrible - and I'm an illustrator. Can I use the CS6 brush engin in CC?

I loved the brush tool in CS6 Illustrator- by turning fidelity to the lowest setting, and smoothness down to zero, pumping up pressure sensitivity, it accurately reproduced the fine shapes of a drawn stroke. I'm an illustrator, so I don't want artificially smoothed curves, I want the line I drew.
This works really well with my Wacom Cintiq tablet... but now CC has removed this level of customisation for the brush tool. WHY? The program is called Illustrator, and as an illustrator, I can tell you having an accurate and finely adjustable brush engine to illustrate with is very important to me and to lots of other people who can draw, and draw for a living.
Now you get this dumbed down control panel when you double click on the brush tool icon- just one slider, with only 4 steps from 'accurate' (not very) to 'smooth' (almost indistiguishable from 'accurate')... it is like I have contracted a nerve disease - I draw a line, and it forms into something quite different to the path my pen took. WHY? Can I get rid of this rubbish engine? Trying the blob brush - what is the point of this brush? It is just like the old brush, except for a cursor that shows the largest size for pressure sensitivity... and it has the same crude 4 step smooth/accurate adjuster, that doesn't change the line much at all. I have the latest driver in my Cintiq, so I don't think that is the issue, and CS6 works better than CC.
I am very disappointed, Adobe. Do I have to go back to CS6 for all my Illustration work? Please improve the CC brush tool controls.
I am still reeling from Adobe's quiet removal of a whole tool: Inverse Kinematics/Bone tool from Flash CC JUST when I was finally using it to animate, but that's another story.
Honestly, having use them for a while, Photoshop,
Illlustrator, InDesign and Flash CC are, as far as I can tell, no step up at all from CS6, except that you have to pay for them forever.

More on this, now becoming known as the CC pencil tool fiasco, on these fora:
Re: PLEASE PLEASE adobe. The new pencil tool has become unusuble to me
Re: Changing line fidelity with CS6 Brush Tool
Re: All pressure sensitive brush presets gone!
If you are affected by the lower accuracy controls for CC's brush or pencil tools, use this Bug report/Feature request form to let the folks at Adobe know- they are actually hopefully going to fix this.......
thanks to Daniel for setting this up:
hey all, if you are going to file a bug report (as per Neeraj's suggestion), i've made up a draft to make the process easier. feel free to adjust it as much as you want, obviously; trying to equip us busy folk.
Obviously customer service & product development are two different departments, so if you're bummin out on the new functionality, submit a bug report!
link to submit bug report:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
******BUG******
Concise problem statement:
I was told to by Neeraj N(staff) to report this issue based on this link : (http://forums.adobe.com/message/6065706).
The Pencil / Brush tools have lost essential functionality with the addition of the new accurate / smooth adjustment preset. Users are no longer able to specify high-accuracy pen mapping, as the finest accuracy setting is now set to 2.5px (legacy versions allowed accuracy to .5px).
I would think adding additional slider nodes to allow more accurate mapping (while still using the accurate / smooth preset) allow for a minimal change in programming with a maximum return for power users.
Steps to reproduce bug:
1. open illustrator
2. use either pencil or brush tool.
3. draw erratic and high detail shapes
Results: shapes are smoothed to 2.5px smoothness, even when the accurate / smooth adjustment preset is set to full accuracy.
Expected results: shapes have minimal / no smoothing to maintain the integrity of the artwork.
Thank you for your consideration.

Photoshop CC flashing window while using quick selection or brush tools.

Whenever I am using the quick selctions tool or brush tools, basically anything that involves movement, part of my work space begins to flash. Any way I can fix it? I originally thought it was my exernal display, but then noticed it only happens in PSD.

Chris - I am running 10.9.1 as of now and unfortuneately I am running Intel drivers. Updating the Photoshop CC Application helped, but every now and then I am getting a few flashes. It is way better than before though, it was getting untolerable.
I am running a MacBook Pro hooked up to a ThunderBolt display to.

PSE 9 crashes when I use the Spot Healing Brush tool

When I use the Spot Healing Brush tool PSE9 crashs completly. Is it a bug? In the older version 8 I had no problem.
I use WIN XP SP2, Intel Pentium 4, 3 Ghz, GPU: NVIDIA Geforce FX 5700, DirectX 9.0c 4.09.00.0904.
I tried it also on another PC with WIN7 and it caused the same problem.
Thanks for any adivse

I know this post doesn't really help you guys, but I'm also using PSE9 on a Win7 Intel Quad Core Dell computer and the spot healing brush works fine. I only offer this post to indicate that it apparently is not a universal bug in PSE9. Perhaps an Adobe expert can jump in here and help. I can only offer that in Preferences I do have the RAM dialed up to 80%, but I don't think this is related to your problem.

Sampling color using "Option" key while Brush tool is selected (CS6)

I am used to "Option" clicking on a color, while using the Brush tool, to set the foreground color. In CS6, it is updating the background color instead, even though the "Info" panel clearly says "Click to choose new foreground color" when I hold down the Option key. What setting am I missing?
The foreground color is the active color in the color swatches.
Manually selecting the Eyedropper tool and option-clicking, updates the foreground color. Simply clicking, updates the background color

I think that Conroy has given you the solution, but one can also toggle the Foreground and Background Colors with the X key. I assume that is the same (unless one has remapped it) on the Mac.
Good luck,
Hunt

Flash Pro CC crash when using pencil, brush tool

Hello,
I have bought the full CC package and installed Flash Pro CC today on my laptop (lenovo y50) and im getting crashes when i use the pencil and brush tool.
When i use the select tool the selection is not in the right place. program feels weird.
Im using lastest version
running windows 8.1
lastest flash and air and graphic drivers.
It just crashes doesn't even show a error just benggg stopped working.
Can anybody help me out?
Greatzz

solved
i was having the same problem and found the solution from Adobe.
you have to go to control panel - hardware and sound - display -
change the size of the text to the smaller one 100%
REstart the os and start adobe flash
i wish this will help

Clone or Healing Brush Tool Creates Ghost Layer or Image - Unusable

I am using the latest version of Photoshop CS5.5 on a fully updated MacBook Pro.
I am having issues with the following tools:
Clone Stamp Tool,
Healing Brush Tool,
More details:
Essentially it "appears" that Photoshop is duplicating the layer and the layers appears to be dragged whenever the cursor is moved. I do not need to be holding down the mouse button for the layer to follow the cursor.
If I click outside of these tools then photoshop functions as normal, and this extra layer-effect disappears. Clicking back to those tools however causes it to reoccur.
From testing, when first selecting these tools (on program startup) nothing occurs. It's only when I select the target area (option+click) to use the tools does this problem begin.
I have checked, and no layer is duplicated. It is also a single image (so not a copy on top of the original).
I have been using Photoshop for a few years now and familiar with it's interface and functioning. Initially it was working fine on this laptop, however in the last few months this problem has begun and persisted. On other computers it is functioning fine. A complete uninstall and reinstall of Adobe on the laptop has made no change either.
Please can someone help? Thanks in advance for any assistance or guidance you can provide.

I am not saying that this will absolutely sort your problem but it is a good place to start.
Try resetting your Photoshop Preferences. Check out this post for instructions.
http://forums.adobe.com/thread/375776
Good luck

Can't edit gradient or brush tool.

Im not sure what did I change but now when I use the gradient or brush tool the pin and stripes that used to show
that allowed you to edit and select them no longer shows.
I NEED IT BACK, HELP/

This happened to me as well, it would be nice if there was a hidden indicator in the right panel around the dimmed out edit button to indicate there are existing edits but they are just hidden.

Problem with CS4 brush tool "paint inside mode"

When I use the Flash CS4 brush tool in "Paint Inside" mode it erases part of the strokes around shapes. For rectangles it erases the stroke on the top and left hand side where the brush head crosses it, though it never seems to affect the other sides. The effect is less consistant with ovals, but it breaks the strokes at some points. I am using Flash CS4 version 10.0.2 on Windows XP, and I have checked for program updates through the Help menu. Here are two examples:
If I understand right, the brush tool shouldn't be changing the stroke anywhere in this mode. I would be grateful for any help.

This has existed for a very long time in Flash, at least back to version 8. I'm not too sure, but it certainly only affects two out of the four sides of a square. There is a bug on this, so I will send it back for review.

Where is my "regular" brush tool?

Please HELP!!! I am a an amatuer at best and really need help !!! I need the regular, simple to use "brush" tool icon to come back! the only thing in the panel is the smart brush tool and for the life of me I can't figure it out!!!i just need the regular brush tool back to make polka dots for my daughters' bday invtations..PLEASE HELP!

The paint brush tool (regular brush tool) is either just above or to
the left of the smart brush tool (the brush with a gear).
Click and hold on any of the tools in the toolbox to see the nested tools (hidden tools)
Location of the tools in the toolbox:
http://help.adobe.com/en_US/photoshopelements/using/WSae2ea3b149d0c3591ae939f103860b3d59-7 e2a_WIN.html
MTSTUNER

Brush tool disappeared?!?

I'm using PSE7 and my brush tool seems to have disappeared from the toolbar. Any ideas how I can get it back?!?

Thanks, boy do I feel like a complete idiot!!! Yep, you guessed it, I'm new to PSE. Thanks again!!!

Allow marquee, lasso, brush tools in spectral pitch view

When spectral pitch view is active, only the Time selection tool is allowed. Please, allow marquee tool, lasso tool and brush tools to be selectable and usable in the spectral pitch view.

Shift-click option only works to extend a previously selected area to the clicked position and only works with the marquee tool. You can change the size of selected Marquee or Lasso area by selecting and dragging the handles that appear when the mouse hovers over the edges or corners of the selected area. Hovering over the selected area shows the Hand icon so that you can click and move the selected area elsewhere in your audio.
This part shown in the Help file doesn't seem to work as specified though.
"To add to a lasso or paintbrush selection, Shift-drag. To subtract from the selection, Alt-drag."
In AA3 when you held the Shift or Alt key you got a + or - sign added to the tool icon that then allowed you to add to or subtract from your selection.

How to use pen tool in Adobe and Illustrator?

How to use pen tool in Adobe and Illustrator?

With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

Can anyone explain why my surface pro 3 will not accurately use the brush tool in adobe illustrator?

My surface Pro 3 is amazing with photoshop but it cuts in and out using the brush tool in illustrator. Does anyone know of a fix?

Hi Dinar Fresco,
We have seen some issue with n-trig win tab drivers on surface pro 3. Here is a forum post with some solution https://forums.adobe.com/thread/1649008?q=surface%20pro
Sanjay.

Why is Photoshop CS6 extremely slow with the brush tool using Wacom pen?

Could my wacom tablet be the issue? The psd processor spins not stop until I pick up the wacom mouse and click on an adjacent layer then back to the layer I was working on. Then the wacom pen work with the brush tool. This seems to happen when every time I pick up the pen and go back to the brush tool.

First, sorry it took so long to reply. Have been a bit swamped. What I mean by the psd processor, is the balls that rotate kind of like the SBDO when the app is executing a paint stroke. So I tried your suggestion, mad a new file 7w x 5d at 72pi, set the brush to 25px at 100% hardness and made a stroke with the wacom pen. It worked fine. The issue is working in large files say around letter size at 300dpi or large format graphics for trade shows at 150dpi. These files can range anywhere from 6ft x 8ft high to 16ft w x 10 ft h for an example. So painting in a channel mask or retouching using the brush tool in airbrush mode is painfully slow. I've found that while this little psd icon is spinning, if I take the wacom mouse, click on an adjacent layer then go back to the layer I was working on and resume with the airbrush, the problem subsides. It seems this spinning thing happens when I initially start using the brush on a layer or layer mask. Do you get what I'm trying to explain?

Illustrator: Using pen tool or brush tool?

Similar Messages

Maybe you are looking for