Illustrator will not start...

Very annoyed...
such bad timing!
I just restarted illustrator as it was getting sketchy, (as it does)
only to find it will not restart...
Error loading plugins, as you can see they are all stock plugins as I have no extras turned on.
Have done a Machine restart with no change.
Having no trouble with photoshop or indesign.
and have a crapload of work to do...
Lucky I have not removed CC.
am going to uninstall and reinstall.
Why is there no repair tool.
is this the only way to go?
does any one have any better Ideas???
Thanks guys, gals,

just uninstalled illustrator and now indesign has been removed as well.
Sarcasm alert
I'm So glad I have nothing to do right now,
I'm just lucky that I don't have Any work on right now.
and that I don't have a Buttload of emails for artwork that Must be done today.
Not happy at all

Similar Messages

Just loaded Yosemite on my Mac and Illustrator will not start-up?

Just loaded Yosemite on my Mac and Illustrator will not start-up?

Reinstall the software and also read this:
http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html
Mylenium

Illustrator will not start and announces an error message 4294967253.

Hello
Illustrator dons'nt want to start and announces an error message 4294967253.
What is it?
What do i have to do?
Thanks
Delphine

Hi delphine dupont,
Please refer the thread: http://forums.adobe.com/thread/1119534 with similar issue. First uninstall the software and then run the cleaner tool.
Regards,
Romit Sinha

Illustrator will not start up

Can I uninstall and just redownload? Will it recognize my machine and let me do this?

cactusrose,
Presuming CC you shoul be able to.
It may be worth running the Cleaner Tool in between.
http://www.adobe.com/support/contact/cscleanertool.html

In illustratorCC2014, I tried to configure the use of the GPU of the new features. I have installed the java. I have a 3D set in navidia control panel. illustrator CC2014 will not start. I have not repaired even if you restored in navidia control pane

In illustratorCC2014, I tried to configure the use of the GPU of the new features.
I have installed the java.
I have a 3D set in navidia control panel.
illustrator CC2014 will not start.
I have not repaired even if you restored in navidia control panel.
I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ

In illustratorCC2014, I tried to configure the use of the GPU of the new features.
I have installed the java.
I have a 3D set in navidia control panel.
illustrator CC2014 will not start.
I have not repaired even if you restored in navidia control panel.
I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ

Illustrator CC will not start

I am using the new 27 inch iMac running Mountain Lion. I am a registered Creative Cloud user. I just installed Illustrator CC and it will not start. When the splash screen appears, I get this error message: Can't print the illustration. Disk full error has occurred while it's printing. When I click 'okay' I get a Problem Report with the heading Adobe Illustrator CC quit unexpectedly.
I installed it on an identical iMac configured the same way and it runs fine. Any suggestions?

User accounts can get corrupt. The only real solution is to create a new account migrate any importnat data, and then delete the old one.
Backups can help a GREAT deal. I've had user accounts get completely broken and simply restoring the account for a nightly backup fixes the issue entirely.

Illustrator will not open my files! HELP!

Hello,
My Illustrator will not open my files. At first I will launch the program open a file then the timer just spins and spins as if its thinking but nothing ever happens. The menu on the dock says its not responding. If I leave it like that for about 2 hours it will eventually open. But when I work and save again I get the same thing, application is not responding unless I let it sit there for a few hours. I reinstalled the software and nothing seems to be working.
Please help. This is wasting my time and very frustrating.
Thanks;o)

The files I am trying to open are standard CS3 .ai files... I'm not on a networked server. Its just my computer with my licensed software.
I'm creating a website so there is some type and some placed images. But this problem happens even when I start a new file and draw an image with simple illustrator tools. Do you think I have corrupt preferences?

System PI 7.11 will not start because of R3INLPGM error

Dear experts,
our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
On the source node the PI system starts without any problems. If we switch over to the target node,
the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
ran under QUSRWRK.
In the pool files from SAPSTART we found the following errors:
QPRINT:
R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
QPJOBLOG:
*NONE      Information                 XXXXXXX SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                     From module . . . . . . . . :   O4TMKLIBIX
From procedure . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
To module . . . . . . . . . :   O4TMKLIBIX
To procedure . . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether
                                     R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority
But the authority from all libs and objects are same as on the source machine.
Any idea?
Best regards,
Matthias

Hello Matthias,
Please log on as QSECOFR (or a user with SECOFR authority),
ADDLIBLE SAPXIP71
and run command
FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
Best regards,
B. Wolf

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Settings (and other Apps) Will Not Start (Metro)

This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
Here's the details from the System event log:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          19-Jun-2014 09:21:53
Event ID:      10001
Task Category: None
Level:         Error
Keywords:      Classic
User:          SARSYS9\Michael Sargent
Computer:      SarSys9
Description:
Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
"15612"
Happened while starting this command:
"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
    <EventRecordID>546613</EventRecordID>
    <Correlation />
    <Execution ProcessID="972" ThreadID="4068" />
    <Channel>System</Channel>
    <Computer>SarSys9</Computer>
    <Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
</System>
<EventData>
    <Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param2">15612</Data>
    <Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param4">Unavailable</Data>
    <Data Name="param5">Unavailable</Data>
</EventData>
</Event>
That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
Thanks,
    Mike

Please post questions and problems about using Windows in the Windows forums on
http://answers.microsoft.com
The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
--Rob

HT5654 Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

HP TouchSmart application will not start

We purchased an HP IQ 526 TouchSmart desktop with Windows Vista Home Premium 64-bit machine approximately two months ago. We use Clearwire to connect to the internet. About a month ago the HP TouchSmart applilcation stopped working. It will not start. Every time we try to start it we get the following error message:
HP TouchSmart Calendar has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Sometimes it says it's the HP TouchSmart Notes has stopped working or one of the other TouchSmart applications. I went to hp.com and updated all of the software for the TouchSmart application and Windows Vista. And I reguarly use Windows Update to ensure my OS is current with Microsoft security updates. I also updated the firmware. After these actions and rebooting many times the application would still not start. At this point I contacted HP customer support. We uninstalled HP TouchSmart, then reinstalled. This didn't work. I continue to see information events in the Windows Application Log almost every minute regarding HPTouchSmartCalendarNotes. They are typically the following messages over and over:
Reminder clock elapsed event is successfully fired.
CheckReminder() is executed successfully.
ShowReminder() is executed successfully.
After Fetching the XML nodes, checking for each node is done successfully in ShowReminder()
Events in Events.xml Before Showing Reminder<DataRoot></DataRoot>
I still have a case open with HP support and they said uinstalling the OS and reinstalling is likely the next step but I have to believe someone else has run into this issue or HP has a QFE for this issue. I really do not want to uninstall the OS and reinstall it. This has become very frustrating as the HP TouchSmart application is the primary reason we purchased the computer so my wife can manage our photos and music collection via the touch screen.
If anyone has seen this before or has a solution I would love to hear about it. We are considering taking the computer back if we can not resolve this issue.
On a related note and this might be a separate issue I continuously get HPTCS stopped working messages. I've searched the internet for what HPTCS.exe is and what is does but there is little to no information available.
Please let me know or if there is additional information I could provide that would be useful for troubleshooting.
Cheers,
G

Our machine was sent back to HP and they reformatted our hard drive and sent it back. Wow. Fantastic service. NOT!!!! I could have done that. Without debugging their own software to figure out why this was happening they reformatted the hard drive. I can only expect this problem will happen again since there must be a software update, etc... that is causing this behavior. I honestly do not know how to voice my disgust in their customer service. I have been a long time fan of HP and we basically only buy HP at work but this was the poorest display of customer service I have ever encountered. If your TouchSmart application stops working and the TouchSmart software updates do not resolve the problem you might as well pretend like you bought a normal computer without touch capabilities. Like buying an iPhone without it behaving like an iPhone.

Firefox will not start on limited account. Reports firefox already running but doesn't show in task manager. Adminstrator account work fine

Firefox will not start on limited accounts. It reports firefox already running. This happens even if no other users are logged on. Administrator accounts have no problems accessing firefox

Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Oracle 10G Non-Network install - OEM will not start when on the LAN.

Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13

I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

Lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

Reh... Doesn't work on my 2012 Mac mini. A function key set in Sys Prefs worked in Leopard and Lion on my MB but I cannot get any key to work using SysPref Dictation & Speech. It is befuddling and now I have to go to Edit-Speech to turn on and turn off speech to selected text.
I have used Macs and Apple 2es since cave man days and Apple is becoming so befuddling I am wondering if there is even an advantage to it over Windows XP. I spent a lot on this little box, it looks good (the first one had to be exchanged as it wouldn't link to my keyboard ???) but Apple intuitive does no longer seem meaningful.
If speech to text no longer is accessible by short cuts using Fkeys, why bother to have it in Syst Prefs?
Apple is losing its way. The pleasure is gone and no one at Apple seems to care.

Illustrator will not start...

Similar Messages

Maybe you are looking for