Illustrator won't relink my links, nothing shows up when I press the relink button

Please ... add some detail.
Version, system, what kind of files, where are they stored, anything ...
Our crystal balls can't look into your computer.

Similar Messages

When I press the power button, the screen turns on but nothing shows up., When I press the power button, the screen turns on but nothing shows up., When I press the power button, the screen turns on but nothing shows up.

I press the power button + the laptop turns on but nothing else happens. The screen also turns on but it's blank.

I have now the same problem with 2 bords of this.
I've a friend with one, that we turn it on an all systems seems to work but the screen don't turs on and the d-led ligts turns reed. After that i take off al cards and trie to starts and the problem as still the same. Acording to D-led lights, this means a processor's fail. I take off the the processor to my board and it start's normaly, i've worked whith that all night without any problem. After that i change my board with the other, put all cards, and when i starts,... the problem perssists. (sorry my english). I putt the other board in my case, with my cards, and turn the system on, and was doing the same. I take off the 2 bords, putted them in a tabel, just with prossessor's, AGP Card, one DDR, my disk and clear CMOS, and when i start's all 2 continuos with the same problem, ?( i take off the AGP Cards, and the 4 ledds turn reed again and the problem was the samne. Now i ask, WHAT THE HELL CAN I DO, did i broke my board too, who can i fix this. I can´t change the bios version they don't start. The first was running well, until my friend chenge to a Termaltake Volcano cooler, after that, start´s with this problem. My board was working fine until i change to is case. What i can possíbel have done wrong????? ;( ;( ;(
What can i do to fix this 2 problems.
Thanks to all that read all this,

My 6th gen ipod stopped playing and the screen went white. iIt won't respond except to make a tone when you press the volume buttons. None of the icons appear and it won't play

Is it dead?

Hey there ihscoutnut,
I suggest that you try to use the troubleshooting steps in the following article to help you address this issue:
Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
https://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Whenevenr I call a person sometimes the phone gives me an option of callback and end when I press the callback button the whole screen goes blank and only the upper Taskbar where it shows network provider , time and battery percentage is shown

whenevenr I call a person sometimes the phone gives me an option of callback and end when I press the callback button the whole screen goes blank and only the upper Taskbar where it shows network provider , time and battery percentage is shown

Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red (-) to delete all apps from this list.
- Press the home button twice when done.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

My ipod slider screen wont show up when i push the home button when I try to unlock it. When i plug it into the computar it still wont turn on. What do I do?

My ipod slider screen won't show up when I push the home button to try and unlock it. When I plug it into the computar it still won't turn on. What should I do?

Try the "Will not power on" troubleshooting in the following article:
http://support.apple.com/kb/TS2771

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row! What should I do?

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
What should I do?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device

When I press the tab button all my bookmarks in a list show- How do i make this not happen?

When I press the tab button to open a new page, all my bookmarks in a list show- How do i make this not happen? It should be a blank page correct or the home page?

''cweb [[#question-1048679|said]]''
<blockquote>
When I press the tab button to open a new page, all my bookmarks in a list show- How do i make this not happen? It should be a blank page correct or the home page?
</blockquote>
Ok delete this questions I figured it out in add on settings

When I press the Home button the iPad won't return to the home page. I have to press hard or press down for a long period to get it to change. sometimes I turn it off and on again to be able to access the home page

When I press the home button my iPad won't go to he home page. It is as though the button isn't working properly?

Try this to calibrate your home button:
Open a stock iOS app (e.g., Clock). Once the app is open, press your iPad’s power button until the ‘slide to power off’ screen appears. From that screen, press and hold your Home button until iOS force quits the stock app you have open. You’re done!

HT202159 while downloading mountain lion, a message appears " an error has occurred". Nothing happens when I press the resume button.

while downloading mountain lion, a message appears " an error has occurred". Nothing happens when I press the resume button.

Can you try to create a new User Account, and then pull the OS through there?
Mac OS X 10.6: Creating a new user account
http://support.apple.com/kb/PH6651

Why does this bar show up when I press the tilde key?

Hey all, I have this mysterious bar that shows up when i press the tilde key in AE. It's distracting.
https://www.flickr.com/photos/jeffbriant/14040981723/
(Adobe wouldn't let me upload a picture so I used flickr)
EDIT: I'm using a Mac desktop.

Try quitting After Effects, deleting the entire preferences directory, and restarting After Effects:
DRIVE/Users/USERNAME/Library/Preferences/Adobe/After Effects/

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

TS3297 I am unable to buy anything in itunes. When I press the buy button nothing happens. I have my credit card information on there and also $15 itunes credit.

I am unable to buy anything in itunes. When I press the buy button nothing happens. I have credit card into and $15 credit on itunes. Has anybody else had this problem and if so what was the solution.

Go to a place in France and purchase an iTunes gift card. You should be able to use that in the French iTunes store if you have a French address associated with your iTunes account.

My volume doesnt work and when i press the volume button it shows the headphones volume on the screen without any headphones being plugged in. what can i do to fix this?

My volume on my iPad doesnt work, when I press the voulme button it shows the headphones volume on the screen without any headphones being plugged in. Is there a fix for this?

Try going to settings> general > reset> reset all settings. If that doesn't work. Place a headphone jack in there and just pull it out a couple times. The problem is either your iPad setting is stuck or there is actually a hardware problem and moving the jack in and out might fix it

Wireless keyboard won't connect to iMac, when i press the on button the green light comes on and then blinks twice, i can't type my name/password to log in, please help

wireless keyboard won't connect to iMac, when i press the on button the green light comes on and then blinks twice, i can't type my name/password to log in, please help

Impossible, there are zero, as in none, zip, nadda viruses for OS X. If you have viruses on it they are for MS Windows and will not affect OS X. I suspect the hard disk has crashed, if you have backup then it's not a big deal to have it changed, just take it into your local Apple Store or AASP for service. If you have not been backing it up you may be in for a painful lesson on why backup is critical.

Illustrator won't relink my links, nothing shows up when I press the relink button

Similar Messages

Maybe you are looking for