IllustratorCC 2014 What's New window
Check out this crazy look I get on the "What's New" window in Illustrator2014!
Any ideas?
Using MacPro OS 10.7.5 2 x 2.66 Ghz Dual-Core Intel Xeon 8GB ram
Thank you Yankee Rebel/Tony.
I duplicated what you did, and it worked for me, too.
I'd been having the same issue with my Mac Pro 1,1 (built Nov 2007), running Mac OS X 10.7.5 Lion, with ATI Radeon X1900 XT display card.
Adobe staff member Sumit Sinh referred me to this discussion thread, of which yours was the final entry.
Before finding this thread, I had created my own discussion (10/6/2014) here in the Adobe Communities:
Has anyone else encountered a distorted/skewed Ai CC 2014 Welcome screen?
https://forums.adobe.com/message/6805129#6805129
My final entry in that discussion was this:
Sumit, THANK YOU for your follow-up. It certainly is appreciated!
I visited the thread you provided the link to (above) [https://forums.adobe.com/thread/1512827], and duplicated the steps described in the final entry, by Yankee Rebel on August 6, 2014, which is:
Thanks for your response but the problem is no longer a factor. I went to Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/CEP/extensions and removed "com.illustrator.welcome" folder. That stopped it.
I was having a seize-up problem in In-Design upon launch. It would boot but then freeze when the "welcome" screen popped up. I also deleted the welcome screen docs from In-Design in much the same manner as described just above for Illustrator. It then ceased to be a factor.
A note about the navigation route (Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/CEP/extensions):
In case anyone else makes use of this, be aware that when you get to "Adobe Illustrator.app" you have to hold down the Control key when you click on the app. The Control key reveals, among other options, "Show Package Contents." Select that, and then the "Contents" folder; then follow the rest of the navigation directions.
The above worked for me; no more Welcome window (distorted or otherwise).
Although that window is desirable for its links to New Features, those can be accessed via Illustrator's main menu > Help > Illustrator Support Center. That will take you to the Illustrator CC page on the Adobe website, where you will see these links:
"Overview," "What's New," "Learn & Support," and "Download."
Similar Messages
-
InDesign CC 2014 freezes on "What's New" window
Dear All,
InDesign CC 2014 is freezing up everything when it hangs on the "What's New" window which is completely a blank white. I can't close the application or force quit or do anything else…I have to shut down the computer in order to quit the application or do anything else on the computer -- it is completely frozen. When the computer restarts, InDesign CC 2014 automatically tries to start up again and freezes the computer unless I get to it before it launches and force quit before it gets a chance to freeze again.
InDesign CC is working normally, but I notice that when CC 2014 launches, it also launches InDesign CC with it and both seem to run at the same time. This does not happen when I start from InDesign CC -- only that application is then active.
"I'm also getting an Adobe warning that has begun to appear stating: "Administrator rights are required to complete Adobe add-ons installation or removal" and I'm not sure which application this is referring to or how to log in for these "rights",
Anyone else having these issues? I'm working on a Mac pro.
Small Town GalSorry for not being clear. I did the fix in CC2014 and worked great.
El 06/30/2014, a las 8:40, Small Town Gal <[email protected]> escribió:
InDesign CC 2014 freezes on "What's New" window
created by Small Town Gal in InDesign - View the full discussion
Dear Alberto,
I'm not sure what vernon you're now running? Did the above fix work on the new InDesign 2014? or are you saying that InDesign CC is now working? The suggested "fix" says to open the InDesign CC folder, so I'm wondering if deleting the "What's New" folder from InDesign CC actually also removes it from InDesign 2014? and is a temporary fix for InDesign 2014, allowing it to finally launch? Thanks.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6509465#6509465
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I updated iTunes and now my podcasts will not show. On the sidebar, it states I have 35 unplayed, but when I click on the podcast option, a "What's New" window opens up. Tv, movies and music - no problem. But I cannot manage my podcasts.
Hello Ugmasters, did you find the solution to this problem as I have it as well, spent nearly four hours on phone to apple yesterday, they were very thorough and very patient but still couldn't resolve issue, think it has something to do with zoom button but couldn't zoom out xx
-
Further: I'm running Windows XP.
This happens every time I open Firefox 5 and began just after I upgraded to 5.0.
Note: I've tried suggestions from the various posts in this forum from people who have similar problems, but with no luck. The problem still persists. Does anyone have any suggestions ??hello, this might happen when firefox is not able to properly save preferences in its profile folder. please try this: Click the menu button [[Image:New Fx Menu]] and then click help [[Image:Help-29]] > troubleshooting information > profile folder - "show folder". then a new window will open up. in this window look out for a file named '''user.js''' (it might be used to overwrite your custom settings). in case it is present , delete or rename this file and restart firefox afterwards.
for more information and other steps please also see: [[How to fix preferences that won't save]] -
When on a page if I click on a web link I get a new window that is blank and asks me enter a web address. This started happening with the new 3.6 version. It seems to have something to do with what I choose for the location in my privacy settings as the window changes with each setting but I still cannot get to the new site. Any ideas? I have no problem with this in IE and I have to keep opening IE when I encounter the problem on Firefox which is annoying.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Hi, I'm an ipod newbie, and unsure of what product i have-i believe it's an ipod nano, but can't seem to find any info on itunes that will identify my product.
how do i move ipod nano music to a new Windows 7 computer? My old computer died and when i try to sync to itunes on my new Windows computer, it says it will erase what's on the ipod. I can't seem to de-authorize the old computer (it's been recycled). Does this mean I have to start all over and read in my CD's into itunes? seems very inflexible/inelegant...
thanks for your help, sorry if this question has already been answered before!Is there no ANSWER TO THIS PROBLEM?
-
Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/ -
I am returning to Firefox after having used Safari on Mac for the past year. One thing I liked about Safari was that I could define what page gets loaded when I used the File Menu command to open a new Browser Window. I defined this as opening up with my Bookmarks Menu where I then was able to select the page I wanted to go to.
I have not been able to find a way to define this in Firefox and was surprised to see that "New Window" in Firefox opens all of tabs that I've defined as my Home Page.
Is there a way to manage this?This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
What's New and What's Fixed in 2014.1
First, here are links to the two main documents about new features in the 2014.1 release:
Product Manager Al Mooney's blog: Premiere Pro CC 2014.1 Release
The What's New page in the Help: Adobe Premiere Pro Help | New features summary
(I'll review both of those documents ASAP to see if any little goodies got skipped.)
And now, the bugs that were fixed in this release:
Import
Import of CinemaDNG clip fails if the file has been renamed.
Gamma shift in some re-imported QuickTime IMX clips
Some QuickTime Reference files import without timecode.
Indexing of XDCAM clips can take an excessively long time, footage shows Media Pending until indexing completes.
XAVC-S files import without Timecode
Unable to import certain XDCAMHD 422 Long-GOP clips with Pixel Aspect Ratio of 0.7500 MXF
Spanned XDCAM HD422 clips not handled correctly if the clip names do not follow the normal convention
When a sequence is loaded from Media Browser to the Source Monitor and then inserted to a sequence without explicitly importing, two copies of the sequence are added to project.
Scaling values are not properly handled for clips/sequences imported via an XML file written by some shot management and conforming programs
If the reported duration of an XDCAM HD MXF clip shorter than the actual length in the file, then frames outside the stated duration can be accessed.
Some XAVC and XDCAM-IMX-MXF clips have audio noise introduced on playback
Some .mp4 have green frames and 'static' garbage when played in Source Monitor
Canon XF300 Footage has unacceptable performance for playback
.mp4 clips generated by certain transcoding programs exhibit poor playback performance
PPro no longer recognizes timecode from a .qtc file, referenced from within a QuickTime reference movie.
Some XDCAM422 clips fail to import with generic error
Occasional crash on opening Source Settings for DNG footage, with 2nd monitor enabled
Overexposed white areas in some CinemaDNG footage display magenta artifacts.
When scrubbing C300 clips in Project panel’s Icon view, red frames sometimes show and Event panel reports error decoding frame.
If SpeedGrade was installed before Premiere, then double-clicking a prproj file launches SpeedGrade (Mac Only)
Growing Files
The last frames of some growing file are green. Must relaunch Premiere to correct the problem.
Importing a growing file can take an exceedingly long time, with footage showing as Media Pending
When a growing file refreshes, it stops voiceover recording
The incorrect timecode is shown in the Timecode Panel for growing files.
Timeline playback of growing files drops audio for about 1 second each time the growing file refreshes.
QuickTime reference files for growing files fail to import.
Export
When source is 120fps, export fails if Match Sequence Settings enabled
The Advanced XDCAM Settings section in Export Settings is blank for imported XDCAM presets
In QuickTime encodes, audio exported as uncompressed stereo imports into FCP as dual mono.
When you export to 5.1 AAC with the “Import into Project” option enabled, the resulting clip fails to import, throwing
“File import failure”
Image flicker is introduced in some constant-bitrate MPEG2 encodes
When the only variable blocking smart rendering is an adjustment layer, the effect(s) thereon are ignored and the segment is smart rendered.
ProRes media encoded by Premiere causes are not compatible with certain video QC programs.
AAF export: 88.2kHz and 96kHz audio clips exported to AAF do not appear in some audio production programs.
Audio EDL gets wrong source timecode if clip is nested or part of a multicam source sequence
EDL does not give correct Source In and Out for clips with speed reversed.
EDL does not give correct source in and out on reversed clips.
OMF export fails with some multicam sequences, reporting Audio Export Failure.
Hang during OMF export when the sequence contains a 5.1 audio track/clip.
Smart rendering can introduce black and red frames
Playback
Playback of IMX 50 clip freezes after 12 seconds.
With XDCAMHD and DVCProHD footage, frames are sometimes dropped though the render bar is green.
Audio for some mp4 files plays back at double speed
When pre-roll is set to 1 frame, timecode and video of XDCAM .mxf files are out of sync
Some DNxHD do not decode properly, resulting in frames being played out of order
Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
Audio
With Maintain Pitch enabled, no audio when playing at slower than real-time
Solo buttons in Audio Meters do not work for clips loaded into the Source Monitor
Mono and Standard track puck and tray panner routing for Ls, Rs, C and LFE channels do not adhere to ITU-R BR.1384 standard.
Occasional crash on switching a clip from mono to stereo via Modify>Audio Channels
5.1 channels are not properly mapped for some Dolby content.
5.1 clip changes to a 6 mono channel clip when “Extract Audio” or “Edit in Adobe Audition>Clip” is performed on a project item or track item.
Changes to Frame Rate via Interpret Footage are sometimes not applied to saved for all audio streams, causing most audio channels to be out of sync after closing/reloading project.
Constant Power audio transitions introduce buzz if either track item has zero channels (generally limited to multicam clips)
Crash on applying changes in Modify Audio Channels dialog [Mac Only]
Project Panel
Sorting by Duration is broken if the column has been moved during the current session
If the Project panel is filtered via Rapid Find when a bin is created, the edit control for naming the new bin does not become active automatically, and it cannot be activated manually until Rapid Find is cleared.
Project items cannot be deleted or renamed if the list view is scrolled to the right.
Project panel does not autoscroll to the left when a column is dragged to the right side of the Name column
When a timecode value is typed in the Video Out control for a clip in the Project panel, the value gets reduced by 2 frames upon committing the change
Subclip
When a soft subclip with only an Out Point set is edited into a sequence, the Subclip Start is ignored; the resulting track item extends all the way to Media Start.
The Media Start/End and Subclip Start/End times for subclips from a merged clip are incorrect
Editing/Timeline
3-Point edit: If the source is a sequence and only an Out Point is set for the source, the wrong segment gets inserted when KEM Roll is set to Insert as Individual Clips
Keyboard trim commands do not affect clips on targeted tracks that are outside of visible area of in the Timeline
Switching between sequences can turn the render bar red.
Frame Hold option doesn't generate the freeze frame when speed change is in effect
In the Timeline, the FX badge gets hidden when the clip is not wide enough to show the full clip name.
If the Left/Right Balance control is displayed in Timeline header, the balance will change if the mouse strays over the Header region during click-and-drag operations in the Timeline (such as trimming out)
'Select In to Out' selects clips on locked tracks.
Multicam
If time-remapping is used on a Multicam Source Sequence, the Program Monitor's multicam view continues to play at 100%; if source sequence was slowed, the Composite view goes black after the original end point.
When a multicam source sequence has been slowed down via speed change or time remapping, the extended of the clip goes black—no video
If the audio in a multicam sequence is selected when it is flattened, the audio is sometimes deleted.
Disabled multicam source clips are sometimes rendered to the composite output
The camera can be changed for a multicam clip on a locked track.
The overlay displays timecode in audio time units for part of a multicam sequence if the source clips are stereo and the MC sequence is mapped to mono
If a nested multicam sequence's duration has been increased via Time Remapping, then upon reaching the original end point during an editing pass, the composite view restarts from beginning
Flattening
If a multicam sequence’s audio is 5.1 or adaptive, then flattening deletes the audio.
Crash on flattening multicam clip with keyframed scale when using a camera angle that does not start at time zero.
Flattening multicam can remove some audio clips from the sequence.
Flattening a multicam sequence with reverse speed applied results in incorrect frames being used
Effects
AE Text Template] When text fields are active for editing, they’re not being visually highlighted
Adding mask points very close to each can result in the ordering of the points being incorrect
Incorrect scaling of 1920x1080 adjustment layers in 720 sequences
Unexpected behavior with Cross Dissolves between Adjustments Layers.
Applying both Echo & Levels effects to an adjustment layer causes video playback to freeze
Crash on rendering previews for a Lumetri filter in Software-Only mode.
Crash on deleting a clip from a sequence after pasting an effect mask to the clip.
JPG frame sequence gets scaled down if an adjustment layers is in effect above it [OpenCL only]
Rename GoPro lens distortion presets to include the camera name
Clip name effect doesn't work correctly if Source Track is set to a different track.
Crash on using Clip effect or Timecode effect on a transparent video.
Crash on loading or applying VST Effects (Mac only)
Intermittent Crash with Warp Stabilizer applied (AEVideoFilter)
The Clip Name effect does not work when applied to a transparent video track item, with Source Track set to a video clip.
Crash on applying audio transition to clips with overlapping timecode
Previewing fails when an adjustment layer has an animated mask applied to Opacity and any other video effect.
In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
Masking and Tracking
Shift-dragging a control point for an effect mask sometimes yields unexpected results
If a clip has an effect with a mask applied, moving the clip in the Timeline cause rendered preview files to be lost.
Previews rendered to a P2 codec are incorrect for the first 10-30 frames of an Opacity effect with mask applied
If a mask is applied to a GPU accelerated effect on an adjustment layer, the Program Monitor shows a cropped frame with Playback Resolution at Half and goes completely black at Quarter.
Opacity effect on Adjustment Layers fails to render within the mask with tracking.
After rendering an adjustment layer with multiple effects with masks applied, some of the effects are no longer confined within the mask [Mac only]
Crash on opening some projects with masking and tracking applied to effects
Direct Manipulation control fails to switch between multiple masks that are applied to the Opacity intrinsic effect.
3rd Party
Certain audio filters cannot be applied to a clip in a sequence that is imported via XML
PPro reports audio filter missing when opening a saved project with certain audio filters applied to the clips in a sequence that was imported via XML
Artifacts are introduced when using certain 3rd party transitions.
Certain 3rd party stabilizer plug-in are not working
Markers
On mouse-up after adjusting the Out point of a marker with duration, the playhead jumps to the marker's In point.
Video in Program Monitor strobes when dragging the In or Out point of a sequence marker
GPU
With GPU acceleration enabled, Gamma is being applied to some RAW media when it shouldn’t be.
Basic 3D effect can result in Program Monitor’s video overlay to become corrupted on some GPUs
Performance (Note: Most of these fixes are also listed under a product area)
Locking all Audio Tracks can significantly impair performance.
Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
Navigating through projects in multiple Media Browser panels impairs performance and can culminate in a crash
In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
Canon XF300 Footage has unacceptable performance for playback
.mp4 clips generated by certain transcoding programs exhibit poor playback performance
Interop
Crash on selecting Edit>Edit in Adobe Audition>Sequence...
When a 5.1 clip is sent to Audition via Edit Clip In Adobe Audition, the first channel is used for all channels.
Exporting from Audition to Premiere Pro opens Premiere, but the file fails to import
After grading a sequence in SpeedGrade, Premiere regenerates index & pek files
Miscellaneous
With some capture card hardware, captured uncompressed clips have the wrong field order
In the Overlay Settings dialog, the Track control is not properly constrained by the Property control.
A single preference flag is used for the "Import into Project" setting in the Export Settings dialog and the Export Frame dialog; they should be managed independently.
Custom scratch disk location for Video and Audio Preview folders get’s reset to default, “Same as Project File"
Changes to the label color cannot be undone.
In the Usage lists, all instance are ordered by track item start time; should sort by Sequence Name first, then by track item start
Automatic relinking fails in certain cases when the name of a folder in the relative paths are too similar. [Mac only]
With OpenCL GPU acceleration and Transmit enabled with some 3rd party I/O cards, the video on the output monitor is corrupted
Newly created projects sometimes have multiple Project Panels open.
And in closing, a request: If this post prompts you to think "Great, but what about..." or "Thanks, but I just found this new bug in 2014.1," please start a new thread--after, of course searching to see if there's already a topic on that issue.
[And Shooter, I apologize in advance if the foregoing contains any typos ;-)]Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh. -
New windows no longer opening maximized, what can I do?
Until today, a new window was always maximized? What can I do to return to that situation?
A new window opens with the dimensions that are saved in the file localstore.rdf in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] the last time you closed Firefox.
RDF:Description RDF:about="chrome://browser/content/browser.xul#main-window"
See also http://kb.mozillazine.org/Corrupt_localstore.rdf -
I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to
it is a windows 8
-
Every time I try to do anything on my safari it randomly opens new windows to what looks like fraud websites. Also it will not let me watch anything on Netflix. Please help!
You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
I want to view new pages in tabs. I thought I had clicked the appropriate option to do so but it continually opens in a new window instead. I have restarted my browser in safe mode and the tabs are there and work normally. What gives? I am not sure how to narrow down the problem here.
Hello rossqo, '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
thank you -
New problem, Lycos Mail is my home page. When I open a new window I usually get Google search, which is what I want. Now, somehow when I open a new window I get Yahoo search. How do I change it back to Google?
Thank you,
RandyA new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can middle-click or hold down Ctrl and left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at this extension to set which page to open in a new tab:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/ -
What's new in Photoshop CC 2014.2.1?
What's new in Photoshop CC 2014.2.1?
Is this updater Macintosh version only?Checking Google and All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
There is no 2014.2.1 except on pirate sites and I strongly urge you not to bother with them.
These so far are the latest releases:
Photoshop Help | New features summary
Maybe you are looking for
-
Had to install a new hard drive early 2008 iMac, now can't restore from Time Machine.
Had to install a new hard drive in a early 2008 iMac, now can't restore from Time Machine. Backups show in Time Machine but I can't select them. Serial Number QP*****1LW <Edited by Host>
-
Error Message in Word Convert To PDF Tab
I am gettting an Error Message in Word Convert To PDF Tab The pop up box comes up when I am in Word 2003 , it says "Unabkle To Find PDFresource files, you must be an adminstrator to install these files So I cannot create a PDF file when in Word 2003
-
Does Oracle support multiple pdk-forms on the same page??
We have a portal page that contains two portlets ("summary" and "review comments") and each in turn contains a pdk-form. When a form (say "review Comments" portlet) is submitted via post, in the resultant page, the second portlet ("summary") gets the
-
Related to flash point in cg02
Hi, what is table and field name from which we get the value of flash point in case of dangerous and non dangerous goods? no F1 help available for that. thanx in advance. regards saurabh
-
I am currently doing a project about designing standalone data acquisition module with USB 2.0 interface. For the hardware, a USB FIFO chip(FT245BM) is used to communicate with PC via USB with the driver DLL provided by the manufacturer (FTDI). I wan