ILO 2 vs. 3, basic vs. advanced, and RIBCL

We have an in-house utility that uses a Perl script to send a RIBCL script to an iLO to do certain sorts of user administration. It works like a champ on the iLO 2 systems we have. However, we're just getting in some systems with iLO 3, and the same script no longer works. On investigation, it seems that the iLO accepts the XML file...and then never responds, not even with an error message. The only configuration difference between the iLO 2 and 3 that we have is that the iLO 2 systems have hte advanced feature set, and the iLO 3 systems have just the basic feature set. Would this make a difference? The documentation doesn't say so, and I don't want to start lobbying to get the upgraded feature set if it's not going to help.

I'd like to chime in, since George and Scott has already discussed all aspects already.
The next question is WHAT clients?
Smartphones and tablets are notorious, in marketing data sheets, for muddling the facts. True, they can "support" 802.11n, I'll be a d1ck and say 2 x 3 MIMO. The question I normally throw is this: Can the product really push 300 Mbps? The answer is no. Smartphones and tablets, in the current market, do not have the capacity to transmit nor the power to process 300 Mbps.
Current smartphones and tablets can't process more than MCS 7 (around 35 Mbps). I am not sure about the new 802.11ac smartphones and tablets (like the Samsung Galaxy S4) as George hasn't gotten around yet.

Similar Messages

Basic start date and basic finish date in the maintenance sub-order

Hi guys,
when I create a maintenance sub-order by the transaction IW36 are the Basic start date and the Basic finish date taken,inherited from the principal Maintenance order?And if it is in this way,is there the possibility to put these two dates as a current day only on the maintenance sub-order ?Thanks in advance...
Maximilian

Here is my code
DATA : lv_date_diff TYPE i.
lv_date_diff = caufvd_imp-gltrp - caufvd_imp-gstrp.
caufvd_exp-gstrp = sy-datum.
caufvd_exp-gltrp = sy-datum + lv_date_diff.
This is a 4 year old answered message. Please open a thread for your specific query.
-Paul
Moderator
Edited by: Paul Meehan on Nov 24, 2011 8:42 AM

Basic of IDOC and ALE

Hi All,
I am beginner of ALE IDOC.
Please tell me in details whats is Control Records, Data Records and Status Records in details.
Thnks in Advance,
awards will be given.
Ulhas

Hi,
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
u2022 Create a Customer Distribution Model (CDM);
u2022 Add appropriate message types and filters to the CDM;
u2022 Generate outbound partner profiles;
u2022 Distribute the CDM to the receiving systems; and
u2022 Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC u2013 Creating IDoc Type from Change Pointers
RSEOUT00 u2013 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
There are two filtering in IDoc.
Segment Filtering:
Segment filtering can be achieved using T/Code BD56. Here you can suppress a whole segment irrespective of data inside it . You have to give Message Type / Sender Prrtner / Receiver Partner.
Data Filtering:
Data filtering can be done in dustribution model (BD64) where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Please check this link for more information.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Regards,
Shiva Kumar

Any good basic to advanced material available online for syndication

Hi Guys,
anybody has got basic to advanced materials related to all about MDM Syndication?
And also since I am trying my hands more on MDM nowadays, I would like to have some must read blogs/articles on MDM technical and functional
Thx
mike

Hi Michael,
Apart from the detailed Syndicator guide you can go through following guides:
A very crisp and detailed document detailing steps from various systems:
MDM Syndication
A good document talking about selective syndication:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f?QuickLink=index&overridelayout=true
A advance syndicator document :
How to Trigger syndication when certain fields of a Record are changed WITHOUT creating any Time StampsSDNWeblogs_MasterDataManagementmdm%2528SAPNetworkWeblogs%253AMasterDataManagement%2528MDM%2529%2529
Thanks,
Ravi

Error on Visual Basic 6.0 and Crystal Reports 9.2 on XP SO

We need support to resolve an error on a system made with Visual Basic 6.x and Crystal Reports 9.2.
Error '-2147417848 (80010108)'
Automation Error
Not always give these errors.
Often occurs after request two reports followed and SO is XP
When SO is Windows 2000 professional this error not occurs.
These are versions of the products used:
Versión Visual Basic: 6.0.9782
Versión Cristal Reports: 9.2.0.448

Hello,
This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
Try downloading the only patches available from:
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
Thank you
Don

I just installed iTunes on my computer, where I already have all my music. I went to Edit Preferences Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

I just installed iTunes on my computer, where I already have all my music. I went to Edit > Preferences > Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

Have you looked in the Music App on your iPhone? On the iPhone music is played by the Music App not iTunes.

Merging Basic data View and Classification View in Material Master

Hi,
There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
A quick response is appreciated.
Thanks & Regards
Bhaskar Baddela

Hi,
Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
Regards,
AKPT

Process Order Basic Finish Date and Scheduled Finish Date

Folks,
I have a requirement from the business to be able to update the Process Order Basic Finish Date and Scheduled Finish Date independently from each other.
In other words, update the Basic Finish Date and the Scheduled Finish Date cannot change or update the Scheduled Finish Date and the Basic Finish Date cannot change.
I believe the reason for this is to be able to use the Basic Date to maintain the ATP accurately and keep the Scheduled Date to mark when the order was originally due from the shop floor to be able to measure if orders are being completed on time or late.
I have worked in tnx OPUZ and had some success with other issues with these dates but I can't seem to make them work independently from each other.
Or does anyone have any ideas how to measure proces order performance to the production schedule?
Thank you for your help,
Greg

Rajesha, thank you for your reply but it doesn't solve my problem.
Let me restate my scenario:
I start a process order and both the basic and scheduled finish dates are the same, June 1.
At some point, shop floor tells me they will be late and cannot deliver until June 15.
I need to update a date in the system so the ATP and the MRP planning runs have correct information for promising customers, I will update the Basic Finish date with June 15.
I also need to keep the original June 1 date in order to measure the shop floor performance to the production schedule to measure how early or late the order was delivered. How can I keep the original finish date or how can I measure if a process order is early or late??
Thank you for your help,
Greg

How to make like Encarta encyclopedia and basic screen settings and how to lock the documents in the entire data.

dear guys how can i make like a off line Encarta encyclopedia and basic screen settings and how to lock the documents in the entire data in visual studio.
thank you.
Million
Getu

Dave,
I will +1 Pixelan's products. They are great, simple, and have about the best support that I know of. When you explore, say Pixelan's SpiceMaster, dig deeply. Things appear rather mundane, on the surface, but there is so very much power lurking, just below the surface. I could almost imagine a 1000 page manual to cover every possible aspect of that program... Every time that I use it, I learn something new, and wonderful.
Good luck,
Hunt

Basic Start Date and Schedule Start date

Dear All,
In a Preventive Maintenance order generated through IP30, I am getting Basic Start Date and Schedule Start date as different dates. For all other orders those date as coming same. I am using forward Scheduling. Can any one of you please tell me what would be the problem?
Regards,
Babu R

[SAP Note on Scheduling - Note 45433|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=45433]
Regards,
Maheswaran.

Basic start date and finish date changing in the past

Hello Gurus,
I set the scheduling parameters as " Do not adjust basic dates, dep rqmts to order start " and also assigned the priority to populate the basic finish date. System does calculate the finish date based on the priority and start date as current date but it does allow me to change both dates in past or future which should not happen.
Please do note that I activated the defaulted date as current date as well. Even I removed this mark and did not work.
Please let me know if there is any way to restrcit the changing it alteast in the past.
Mahee

This can be prevented using one the following ways depending upon your needs
---> Set the "start in past" field to appropriate value using transaction OPU7 for order type /Plant combination
---> Make the "Basic start date and Basic end date" fields as "Display only" through the Field selection config for the order type.
---> Use the user exit on "SAVE" of the order to check for the same
Regards
Narasimhan

Advanced and Quick Search on UIX Pages

Hi all,
I have run into a situation on pages where I have the advanced and quick search enabled. Here's what is happening. You click on advanced search and search for a particular attribute. This works fine. Then you click on the button for quick search so that the advanced search view collapses. If you go to another page within the application and come back to the original page, the page is displayed with the advanced search view, even though when we left the page it was set to quick search. Any one have any ideas why this occuring or a workaround so that it doesn't happen? Thanks in advance.
Susan

Susan,
Switching between advanced search view and quick search view is done at the client using javascript. Only once a search is issued by pressing the Go or Find button, a request is sent to the server, and we are able to save the "search mode" state.
In 10.1.3 we have solved this by using Partial Page rendering rather then javascript.
Steven Davelaar,
JHeadstart Team.

HT5295 What are the basics of creating and distributing Podcasts?

What are the basics of creating and distributing Podcasts?

Search the web for "creating podcasts" and you'll find a plethora of information.
Regards.

Basic type DELVRY03 and FM IDOC_INPUT_DELVRY

Hi experts,
i have a prblem using the basic type DELVRY03 and FM IDOC_INPUT_DELVRY. on transaction we19 am passing data to the segments of the basic type delvry03 so that i can update an outbound delivery...the problem here is that when am running the FM idoc_input_delvry....the data for the first item are updated correctly, but the second item is not updated properly...for the second item, the picked quanity is not taken from the segment E1EDL24...instead, this value is added to the delivery quantity...
for example if the delivery quantity is initially 80 for the second item and in the segment e1edl24 i supply 80 to the field LGMNG...this value is not taken as the picked quantity but added to the delivery quantity and hence i get the delivery quantity as 160 and picked quantity as 0....
I kindly requset you to please help on this...
Points will be rewarded...
Thanks,
Vitish.

Hi vitish,
Please check whether u have given right batch number in the CHARG field..if no batch is there then u should not give any batch number...
Regards,
Madan Gopal Sharma

HT5824 When I log into icloud, I click on advanced and i want to reset my photostream but it does not give me the option. Any advice??

I am trying to delete photos off my photostream. I have logged on icloud.com and clicked advanced and then I was told to click on reset photo stream. When I click on advanced, it does not give me the option for reset photo stream. Any suggestions?

Welcome to the Apple Community.
That option was removed some time ago. You can delete any photo from photo stream on any device where you are logged into your account.

ILO 2 vs. 3, basic vs. advanced, and RIBCL

Similar Messages

Maybe you are looking for