ILOM feature "Graceful Shutdown and Power Off"

Hi,
We are using Sunblade 6250/6270s, with a stripped down SLES linux installed. We would want to be able use the ILOM feature "Graceful Shutdown and Power Off", but have failed doing this so far. What is required from the configuration and/or operating system to support this power off alternative? I have searched but not found any information on this topic.
Thanks,
Harri

The ILOM "Graceful Shutdown and Power Off" equal you press power button.
The SLES GUI (init 5) it will popup a window to let you confirm your action when you press the power button.
In the command line interface (init 3) when you press the power button your system Graceful Shutdown and Power Offed.

Similar Messages

Random restart instead shutdown and power off in bios

Dear all,
since some time my Thinkpad T410 randomly restarts instead doing a requested shutdown. Also there is a random power off while POST when I power on the system (I not noticed any relationship between both problems except the date since they occur - maybe a system update, but I'm not sure).
I'm running Linux 3.1.2-1-ARCH with thinkpad-acpi kernel module and laptop-mode enabled.
I also tried Windows and Ubuntu to assure that this problem is not hardware related and I never experienced the problems with both tested OS's.
Has anybody experienced similar problems or a clue where to start looking for problems?
Cheers,
Martin
Last edited by schappi (2011-11-28 19:29:24)

By now, i think i solved the problem with a clean arch installation. I know, it's overkill, but I can't figure out the cause of the randomly appearing problem.
@albLinux: If you have this problem when rebooting each time, try google or have a look here:
https://bbs.archlinux.org/viewtopic.php?pid=1023970
cheers

IMac goes to sleep/hibernate multiple times per day after installing Maverick OS. I have to shutdown and power back on.

iMac goes to sleep/hibernate multiple times per day after installing Maverick OS. Moving the mouse or hitting the spcaebar will not wake the pc.
I have to shutdown and power back on. My iMac was purchased in January 2011 and no longer in warrenty. The energy saver 'sleep' and 'display' settings are set at 10 minutes. When I changed to 'never' the machine got very hot and I changed the settings back. I have checks by: Put hard disk to sleep when possible and wake for network access. Any help would be greatly appreciated.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

My Iphone 3GS auto shutdown and power on

My Iphone 3GS auto shutdown and power on

this is happening to my phone, i changed the battery, i tryed the logic board in another phone and it worked fine, there dosnt seem to be much else in there, still cant get it going.

When i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warren

when i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warrenty

When you plug it in to iTunes does it show up under devices? Try restoring it. That's the best thing you can do if you're out of warrenty

After Sleep, and power off, Lion Crash Totaly! iMac core i5 2011

After Sleep, and power off, Lion Crash Totaly!
I`'ve buy a iMac core i5, July 15 2011, 500gb, 4gb (upgraded to 8gb Ram).
Transf my MBP with Snow at first iMac power on, after tranfer Snow, I buy the Lion, install and use until 2 weeks. After the first Sleep, turn Lion power off to change place. When power on, the Lion was Crashed the computer in some way that was impossible to recover or do anything. even go back the timemachine with Lion or Snow, trey clean PRAM, DVD Boot, nothing works.
So, I put a Ubuntu LiveCD, REMOVE COMPLETE THE GUID of iMac Disk, also clean the PRAM (cmd+opt+ P + R during boot), so, the iMac was Clean and I Install the SNOW (sure).
I just Lost the money and download time that spent to get with Lion?
How can I have a Lion DVD for when Apple fix the LOT OF PROBLEMS?
Have apple schedule for fix problems?

After Sleep, and power off, Lion Crash Totaly!
I`'ve buy a iMac core i5, July 15 2011, 500gb, 4gb (upgraded to 8gb Ram).
Transf my MBP with Snow at first iMac power on, after tranfer Snow, I buy the Lion, install and use until 2 weeks. After the first Sleep, turn Lion power off to change place. When power on, the Lion was Crashed the computer in some way that was impossible to recover or do anything. even go back the timemachine with Lion or Snow, trey clean PRAM, DVD Boot, nothing works.
So, I put a Ubuntu LiveCD, REMOVE COMPLETE THE GUID of iMac Disk, also clean the PRAM (cmd+opt+ P + R during boot), so, the iMac was Clean and I Install the SNOW (sure).
I just Lost the money and download time that spent to get with Lion?
How can I have a Lion DVD for when Apple fix the LOT OF PROBLEMS?
Have apple schedule for fix problems?

Disable "Power on" and "Power off" buttons in VM Manager 2.2.2

Hi Everyone,
I'd like to modify the role "user" and disable the "Power on" and "Power off" buttons so that a username that logs on to the VM Manager that belongs to the user role cannot power on/off a VM. Is this possible?
Many Thanks

The only way of tracking this up would to be to setup multiple individual users. At least you could see which user then powers off / on a VM from the list of jobs on the gui..

A UPS model that works with Mac Native software to do a graceful shutdown and automatic restart during a power failure.

I've tried 3 UPS's (2 APC and one TripLite) that state they are OSX compatible, however, they do not fully respond to the native osx setting in (system Preferences/ Energy Saver/ UPS/Start up automatically after a power failure). This is what happens:
During a power outage, the OS does a graceful shutdown, but does not reboot when power is restored.
Apparently, the UPS is not notified to turn off during the shut down process. The power (on-Off-On) cycle is required by the mac to restart.
Trip lite tech support says they have software that works with Windows and linux to do this, but not mac.
I've tried two older APC UPS's, One Smart UPS1500 and a Back-UPS 1500 with the same result on two different servers and one iMac.
At this point I'm looking for a make and model of a UPS that does work. If anyone can verify a make and model that actually does this, I'd greatly appreciate it.
Its a simple test, just pull the plug on your UPS, wait for the system to shut down, and then plug the UPS back in. The system should reboot.

Many of the CyberPower UPS units are compatible. Checkout the home solutions on this page: http://www.cyberpowersystems.com/products/ups-systems.html

MSI Digicell and Power Off Feature

Has anyone ever use the Digicell's Poweroff capability? Does it actually work? I think something is wrong with mine - despite the unistallation and reinstallation. I"m suppose to be able to set the PC to turn off at a scheduled time in the format hh:mm:ss. But if I set it for 1 minute, why does it display a countdown second of 49000 secs???
Any thoughts?
Thanks!

As is apparent from log of CPU-Z the temperature did not exceed 68*C (154*F). Log was saved during the run Crysis 3 and breaks off when the computer restarts.
Today I will try to insert a different graphics card and see what happens.

Difference between Reboot and Power OFF/ON

Hi Community,
in a forum a User is reporting serious problems after an update to the actual major release 10.6.5. He said if he boot the system in safe mode everything works as expected, after a reboot the same but after a power off and on again, the system is freezing after the login.
Now I'm searching for the difference between this two start methods, maybe we can isolate the problem a bit easier.
Thx & Bye Tom

Allan Eckert wrote:
If the operating system is running when the power button is used to stop the computer, this can do great harm to the disk by not allowing all of the data to be written to disk as it should be.
Yes I agree but this wasn't what I'm asking for. The question is why the system works fine as long as the User proceed a normal reboot and why it is broke after a shutdown. I don't believe that the User enforce a dirty shutdown after he boot the system in safe mode. But sure, if he boot the system after a shutdown, and the system is freezing, than he have to proceed a dirty shutdown. What else could he do?
Thx & Bye Tom

Z87-G41 Bios 1.5 and Power Off problem

Hi,
since i upgraded my Bios to v1.4 to v1.5 i experience many shutdown Issue under Windows 8.1: (Z87-G41)
The system shuts down but the MB refuse to power down (Screen off but CPU, disks and fans still running). Need to keep power button pressed to be able to power off
I reverted back to Bios 1.4 and everything is fine now
Maxx

Please contact MSI Technical and report your difficulties encountered with the V1.5 revision.
> How To Contact MSI <

IPad 3rd gen crash and power off issue

I have ipad 3rd gen iOS 7.1. In the past few hours when using internet(safari or chrome), Netflix, and games some weird things happen.
1. Screen goes black for a few second then returns to lock screen. And/or
2. 'Slide to power off' appears at top of screen along with an X to cancel at bottom of screen and/or
3. Continually get pop up to login to itunes.
All of these things have occurred independently of one another and sometimes they all occur within a matter of seconds.
I have tried: rebooting, logging in to itunes when it think I am not logged in, uninstalling and reinstalling apps, resetting itunes password, and now reading forums.
Suggestions? Feedback? Solutions? Anything would be a great help right now. Thanks!

You rebooted - by which you mean powered off, then powered on?
Then try a reset:
Hold both the Home button and the Power button down for about 10 seconds until the Apple logo appears.
Let go promptly when it appears.
Wait 30 seconds or so for your iPad to restart.
No information or settings will be lost.

Iphone 5 alarm and power off buttons

I have an Iphone 5 and have two questions:
I have my alarm set for a certain time on weekdays and it just does not go off. The only time it goes off is when I switch the phone on or lift the flap (cover for my phone). The airplane mode is off. Can this be rectified and if yes, how?
When I want to switch the cell phone off via the silver button on the top right hand side, it sometimes says "slide to power off" and other times, just goes off. What is the difference between the two and could this be affecting my alarm as well? On the odd occasion, when I switch the cell phone off (without the "slide to power off" option) it just goes off and then I still receive sms or e-mail notifications sounds during the night.
Your assistance in this regard will be most appreciated!

1: The alarm will only work when the phone is on.
2: Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...
More Info here > iPhone User Guide (For iOS 6 Software)

Fake lockscreen and power off screens appearing and cant slide slider on fake lockscreen

hi i have been having my screen frozen with a fake lockscreen with slider that wont slide i know it fake cause its not my lockscreen pic its my homescreen pic and when i try to power off then it show a fake power off slider i end up having to reboot

I Have been having the same problem sporadically and it is most certainly a fake lock screen, exactly as you describe. I have never jail broke my phone nor iPad.
it is really annoying and only happens sometimes. I have even seen the real lock screen and go to swipe it and it immedistely changes to the fake one and wont swipe. I have found i can swipe up in the camera icon and get the camera to start then cancel that and will be at main screen, but that means i have to leave the camera accessible on the lock screen.
it seems to come and go, i also noticed if i wipe ipad and reinstall OS, it wil usually not happen for a month or so then it is back.

Latest update and "power off"

This morning, Blackberry installed an update on my Playbook (relatively new user). The "Power Off" icon has disappeared. Now the unit just goes to sleep which will continue to drain power. How do I power off?

Tap on the Battery Icon in the top right hand corner of the front screen and it gives you the options there.

ILOM feature "Graceful Shutdown and Power Off"

Similar Messages

Maybe you are looking for