ILUIEngineLibCarbon URLAccessLib "could not be found. Please install...

Hi,
I'm new to this forum, but I need some quick emergency help please. I haven't made any recent changes to my Mac or Logic. Last time I worked on
anything, all was problem-free.
Tried to open a song this morning and Logic froze while trying to open
up--got the stupid spinning ball. So I forced quit, repaired permissions,
restarted and tried to open my template song that I always start with, and I
got the message (during the point where it said "scanning audio units"):
<ILUIEngineLibCarbon><URLAccessLib><" cause
everything was running smooth.]

If you are using a legally owned copy of Logic all the numbers for support are printed into the manual.
cheers
rob

Similar Messages

  • Deskjet 2542 all in one error: 'the specified module could not be found' when installing to USB

    Installation proceeds OK until the USB cable is connected, when the error message is displayed and installation ceases.
    I have successfully istalled and run the printer on another XP PC of a similar age - ie old.
    I have upgraded the XP OS to SP3 with numerous updates;
    Checked that the USB ports read Data sticks OK;
    run a/v and malware programs, including Microsoft Safety Scanner;
    checked that USB drivers are up to date;
    uninstalled driver software and re-installed with software downloaded from HP;
    carried out the procedures detailed in HP Support Forum 4022116
    Error message the same.  
    This is for my elderly neighbour - help please!
    This question was solved.
    View Solution.

    Hi @bodger50,
    Welcome to the HP Forums! 
    I understand that your HP Deskjet 2542 gives you the error: 'the specified module could not be found' when installing to USB, on Windows XP.
    I would recommend going through the steps in this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). When you get to the printer install wizard section, just use the full feature software and drivers found at this website, HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. As the printer install wizard is only for Windows 7 and up.
    Hope this is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • The remote computer could not be found. please contact your helpdesk

    RDS Farm set up as follows 3- RD Session Host/Web servers set up as network load balanced  and 2-RD Connection broker servers set up as clustered servers. I access the RdWeb farm from the internet via VPN clientless. I can get into
    RdWeb with no problems, however I have few clients that can connect to RdWeb portal but once they open any application icon the error gets displayed "the remote computer could not be found. please contact your helpdesk ".  The client
    pc is Windows 8 with IE11 and Windows 7 with IE 10.  I could not find anything that related to some users that could not connect. Help!

    Hi,
    Firstly please provide some more information from your side.
    1.  Does the other user can able to work properly without any issue?
    2.  Did you install the RD gateway role to allow the external user to access the internal resource? If so, please help to make sure you configure the FQDN for the RD gateway, and the external users can resolve this name on the internet.
    3.  Can you telnet the RD host server (like telnet server name 3389) to check whether the RD host server is available for another server?
    4.  Did you try to temporarily disable all of firewall and anti-virus to test if this issue persists?
    You can configure RD Web Access behavior on IIS manager as per below.
    IIS Manager Console > Default Web Site > RDWeb > Pages > Application Settings > DefaultTSGateway > add the "FQDN of the Remote Desktop Gateway"
    After finishing all above steps, please launch the RemoteApp again to see if the same issue still exists. For more information, you can refer beneath article.
    Configure Remote Desktop Web Connection Behavior
    Hope it helps!
    Thanks.

  • It say "The VMware Remote Console Plug-in is not installed or could not be found" after installed VMware Remote Console Plug-in!

    Dears,
    I have installed VMware server 2.0.2 in Windows 7, everything is working but one thing not...
    When I control my VM by VMware remote console, sometime It(VMware Infrastructure Web Access) tell me "The VMware Remote Console Plug-in is not installed or could not be found" even I have installed it many time.
    What can I do?

    The following workaround works on Windows for any browser.
    (1) install the plug in.  Never mind that it does not work.
    (2) locate the executable vmware-vmrc.exe, this is typically in the following directory
    "C:\Program Files\Common Files\VMware\VMware Remote Console Plug-in"
    (3) Obtain the virtual machine ID from the links for the VM in the web UI.  e.g. the following is machine ID 192
    https://servername:8333/ui/#{e:"VirtualMachine|192",w:{t:true,i:0}}
    In IE you get these by selecting the link and then looking at its properties using right click.
    If you are really keen and want to write something more sophisticated the VM ID codes seem to be in:
    C:\Documents and Settings\All Users\Application Data\VMware\VMware Server\hostd\vmInventory.xml
    (4) you can then create a COMMAND file or shortcut on your desktop (for the example above).
    "C:\Program Files\Common Files\VMware\VMware Remote Console Plug-in\vmware-vmrc.exe" -h localhost:8333 -M 192
    When you use this link you will need to log in using the webui username and password, and it will start the VM if it is not running.
    (5) I use the following batch file (I am old school), as an icon on my desktop.  I have not tried, but it should work from ANO desktop provided the VRMC is installed on the client and the script uses the correct IP for the host.
    Hope that helps someone and saves them the time I have just spent.
    @echo off
    :loop
    echo.
    SET X_line=----------------------------------------
    echo %x_line%%x_line%
    echo This 'force' loads the VMWare Console for the designated VM
    echo Loading this console will force start the VM if not already loaded
    echo You will need to know the administrator access username and password.
    echo %x_line%%x_line%
    echo.
    echo fubar VM 1 = 112
    echo fubar VM 2 = 192
    echo fubar VM 3 = 368
    echo.
    :: SET /P variable=[promptString]
    SET /P X_machine_id=Please enter the machine ID number:
    echo.
    echo CTRL-C to exit
    SET /P x_confirm=Please confirm you want to start machine ID %X_machine_id%, Y or N:
    if /i NOT {%x_confirm%}=={Y} GOTO :loop
    PUSHD "C:\Program Files\Common Files\VMware\VMware Remote Console Plug-in"
      START vmware-vmrc.exe -h localhost:8333 -M %X_machine_id%
    POPD
    echo DONE
    exit /b

  • Original file could not be found ----PLEASE HELP

    Hello,
    I have 4,000 MP3s on an extrenal hard drive.
    When I open iTunes, I would double click on a song, and it would play.
    NOW, for whatever reason, when I double click on a song, a window pops up and says: +Original file could not be found, would you like to locate it?+
    I then have to manually locate the song, for it to play.
    I do not want to do that for 3,999 more MP3s.
    I went to EDIT>PREFERENCES>ADVANCE>GENERAL andmade sure the file path is my F Drive (external hard drive) where my MP3's are.
    Still no luck.
    The 2 or 3 songs, that I've manually located have a speaker by the title. The other 3,900+ MP3s have and exclamation point by the title.
    Can anyone PLEASE help me?

    I went to FILE> ADD FOLDER TO LIBRARY and selected the folder where my MP3s were.
    This updated my itunes library and now allow me to play every song, but it also made a duplicate of every song.
    Example:
    Kanye West - Stronger
    Kanye West - Stronger
    1 plays and 1 doesn't.
    I just have to go and delete the songs with the infront of the title.

  • On itunes everytime I try and play a track the warning 'the song could not be played because the original files could not be found' please can anyone help me? Thanks

    Hi. I have been having problems with my PC and recently removed a lot of rubbish to clear it somewhat. I dont know if that is relavant however on top of that I have just received my replacement iPad2 which i had a proble with and  thought I would just tidy up my tunes before  sycing.  The problem is that everytime I click to play a track in iTunes on my PC, whilst the track is showing on my itunes, it comes up with a warning 'the song cannot be used because the original file could not be found. Would you like to find it'. I have tried clicking 'locate', but all that appears is 'music Library' 4 different dates. Help i am very confused, can any shed any light on this
    Thank you

    Sounds like you have somehow moved your itunes music library to a different location to where iTunes thinks they should be. Your music should be in a folder called "iTunes Media>Music". If they are located there, try going into iTunes, right clicking on one of the songs and then "get info". When the box pops up, on the first screen it should give a location line where it thinks the music is located. If it is differen't to where you music is stored, try and match it up to the location line that was in the "get info" box.

  • Originnal file could not be found (Please help)

    I store all my files on an external HD. I recently added a new DVD drive to my comp and by default, took the drive letter changing my HD drives letter to something else. Naturally itunes cannot find these songs now. I have even tried changing the letter of my HD back to what it originally was and the songs in my library still can't be found.
    I understand I can readd all of my files but we are talking 20k+ songs here.
    Is there anyway I can get itunes to find those songs without adding them manually? All the songs are still listed in the library but itunes can't see them because the folder name was changed.
    Thanks for any help.

    As noted, change the drive letter back
    but itunes can't see them because the folder name was changed.
    and rename the folder exactly as it was.

  • Tecra S11: Toshiba Detection Tool: Your product could not be found error

    Hi,
    I use Toshiba Detection Tool to find drivers quickly for my tecra, but for a month now the page gives this error
    Your product could not be found
    It is no problem to select my laptop from the drop down list again and again, but it was comfortable, when it worked.
    Is there a solution for this problem?

    No, there is a Detection tool an exe file. "TOSHIBA-detector,exe" You run it and it opens a browser with your exact product's driver psge. (My Toshiba laptop is a european one.)
    The error message:
    Auto Detect Error
    Sorry!
    Your product could not be found
    Please click here to return to the support homepage where you can manually select your product

  • RUNDLL, error loading c:\documents the specified module could not be found

    Hi! I am new here and really need your help. We have a few Lenovo T400 notebooks. If I want to install Windows XP Prof with SP3 I always get this error dialog during GUI mode setup 9 Min. before finishing.
    RUNDLL, error loading c:\documents the specified module could not be found 
    We install this version of Windows on other notebooks without error. The logs show nothing special.
    Nothing really happens but it's looks bad for our customers. I think I am not alone because there are more
    entries in different forums with same problem without solution.
    Every help is appreciated. Thanks!

    Thanks for your reply! But the list of hotfixes on Microsoft Knowledge Base includes this hotfix?
    List of fixes that are included in Windows XP Service Pack 3
    888111  (http://support.microsoft.com/kb/888111/ ) Universal Audio Architecture (UAA) High Definition Audio class driver version 1.0a available for Windows XP, Windows Server 2003, and Windows 2000 Hotfix
    http://support.microsoft.com/kb/946480/en-us
    Sorry, we use Windows XP SP3 with this hotfix included. All of our other hardware which needs this hotfix too works fine with SP3.

  • Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'

    Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'

    Managed to get the installation sorted. Go to Control Panel, and where you have a list of all installed programs, repair all the Apple/Itunes related programs. Installation worked fine after that. Hopefully it helps you out too!

  • After installing iTunes 10.5 update i get the following message when trying to play any song in my Library "The song could not be used because the original file could not be found. Would you like to locate it?"  how do i fix this??

    I have an iPod Classic and work on Windows 7.
    i recently installed iTunes 10.5 update and since then i cannot play any of the songs in the Library - i get the following message
    "The song could not be used because the original file could not be found.  Would you like to locate it?"
    what happened to all my songs (almost 2000) How can i get them back into my music library?
    Please help - i do not want to spend another week downloading all my cd's onto my computer !!!!!

    Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
    tt2

  • Boot device not found - Please install an operating system on your hard disk

    Trying to boot up this morning gave this error message:
    "Boot device not found
    Please install an operating system on your hard disk
    Hard Disk <3F0>
    F2  System Diagnostics"
    Pressing F2 brings up to  the "HP PC Hardware Diagnostics UEFI" page, where its shown:
    "Version 1.6.0.0 - BIOS
    Fore more info please visit www. ... ...
    Memory Test
    Hard Drive Check
    Language
    Exit"
    Tryied the HD check but it says:
    "SMART Check : Not installed
    Short DST : Not installed
    More details:
    No bios upgrade was made, never, only a big updating of Windows yesterday.
    Could someone kindely help me out please?
    Thanks, Perry G.

    Hi,
              The above error message shows that the Hard disk drive is failed on your unit. You have to replace the Hard disk drive and reinstall the OS.
    To order parts click the below link
    https://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=FA59F7C7DCAC4237B498C91D0507A761
    To order Recovery disk click below link
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • Installing SQL 2012 SP2 - The specified module could not be found. (Exception from HRESULT: 0x8007007E)

    Hi,
    I am trying to install the SQL 2012 SP2 in one of the servers. I am getting the error as :
    TITLE: SQL Server Setup failure.
    SQL Server Setup has encountered the following error:
    The specified module could not be found. (Exception from HRESULT: 0x8007007E)
    Error code 0x84B10001.
    The same setup is working in other servers, but on a particular server I am getting this error.
    Server configuration: Windows server 2008 r2 standard edition, servvice pack 1 , 64 bit OS
    How to fix this?
    Thanks

    Hi Venkatzeus,
    Based on my research, the issue is caused by that some .dll files are corrupt or missing during the installing of SQL Server 2012 SP2.
    In order to troubleshoot this issue, please view the detail error message in SQL Server Setup Log Files. We can read the Summary text under %programfiles%\Microsoft SQL Server\110\Setup Bootstrap\Log\, and the Detail text in the place %programfiles%\Microsoft
    SQL Server\110\Setup Bootstrap\Log\<YYYYMMDD_HHMM>\Detail.txt. For more details, please see:
    View and Read SQL Server Setup Log Files
    Besides, here are some similar issues for your references:
    https://social.technet.microsoft.com/Forums/en-US/29e3cef1-4699-4710-9aa5-d56cf4a279c5/the-specified-module-could-not-be-found-exception-from-hresult-0x8007007e-systemwindowsforms?forum=sqlanalysisservices
    https://social.technet.microsoft.com/Forums/en-US/b2faae67-19af-4f50-88c6-5a427556df3e/error-encountered-when-creating-new-integration-services-project-0x8007007e?forum=sqlintegrationservices
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • DDL required to complete install could not be found. Error 1603. What to do?

    DDL required to complete install could not be found. Error 1603. What to do? Any link from where I download the required DLL? Kindly help please.

    The message reads:
    There is a problem with this window installer package. A DLL required for this install to complete could not be run.Contact your support personnel or package vendor.
    I am using Windows 7 Then it says: 
    Installing skype failed. Code 1603. Fatal error.

  • Installed Xl Pro but get message Serial Number you provided is valid, but a qualifying product could not be found on this computer

    I just bought and installed Adobe Acrobat XI Pro, but when I open it, or access a PDF file, I get the error message "Serial Number you provided is valid, but a qualifying product could not be found on this computer."
    The list of products on the drop down list that comes with this message includes Adobe Acrobat XI Standard and Adobe Acrobat X Pro Macintosh, but doesn't include Adobe Pro XI for Windows. Selecting either of those, and using my serial number, fails, of course. As a result, I can't run my newly purchased program, or access any PDFs.
    Please tell me what to do.
    Chuck Poland
    [email protected]

    Chuck you have placed Order for Acrobat Upgrade if you don't have any previous version of Acrobat than you need to cancel this order and need to buy a full version.

Maybe you are looking for