ILuv Alarm clock connect to Iphone 5

I have an ILuv Alarm clock and I purchased a lightning adapter but no music comes out when I plug it in.  Is there something else I need to purchase for my Iphone 5 to connect to the 30 pin on the ILuv?  I don't want to have to buy a new alarm clock.
Thanks

Hi Tina252,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots. 
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756?viewlocale=en_US&locale=en_US
Cheers,
- Judy

Similar Messages

  • Does the alarm clock drain the iPhone 4 battery?

    My iPhone 4 battery drains overnight and I was wondering if the alarm clock has something to do with it. If this is not the case, is there a way to not have the battery drain overnight?
    Please let me know of anything you know to conserve battery life as much as possible.
    _

    Leaving it overnight without charging will use small amount of battery. Reason is that it is still connected to a 3G network which draws some power to maintain a good reception. Anything not in sleep mode will use some battery.
    To conserve battery life as much, just keep it in the charger overnight. It will not harm the battery as when the phone is fully charged, the charging stops.
    I normally keep my phone in my charger when I'm home, but when I go out somewhere I unplug it.

  • Any indicators for  3rd party Radio alarm clock docks and iPhone 5?

    Has Apple created any guidelines for the iPhone 5 when using an older radio alarm clock dock, using the lightning to 30 pin adapter ? My iPad is no problem, but my iPhone 5 (when I have it in hand) might be. Any ideas?

    For Apple to see this you need to repost it at
    http://www.apple.com/feedback

  • Alarm Clock Radio for iPhone??

    I am currently looking for a alarm clock radio that is compatible with the iPhone...is there one? If so, who makes it?

    example
    http://www.amazon.co.uk/Speaker-Radio-Alarm-Charging-Cradle/dp/B000EXO3VU

  • Alarm clock on ipad/iphone

    sometimes I will open my ipad alarm clock and notice that it is showing the day of the week as the wrong day, for instance, today Sunday was highllighted instead of Tuesday, meaning my alarm clock didn't go off for work.  The calendar does show the right day, and if I restart the ipad, the alarm clock will show the right day of the week again.  Anyone know why this might be?

    Something weird is going on. Close all apps on the iPad and reset the device. See of that corrects this situation.
    Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that fails, reset all settings. Settings>General>Reset>Reset All Settings. No data will be lost but all of the device settings must be needed again.

  • How can I change the alarm clock sound on my iPhone

    I can't figure out how to change the alarm sound on the Alarm Clock in my iPhone?  Anybody got an idea for me?

    What's wrong with you? Oh, now that you realized you made a mistake and I didn't say "Alarming"? The app tited "Alarmed" is the first thing that pops up if you search the App Store using the search term "Alarmed". It is also the name of the app as it appears on the screen of my phone.  Oh, and the developer refers to it as "Alarmed" on his website.It may not have occured to you but, it is possible for more than one app to have the same name. Most of the people here are smart enough to figure out which one is the alarm clock by reading the description. But, we've already covered the reading comprehension thing, 

  • Iphone alarm clock not working

    the alarm clock on my iPhone isn't working I was just wondering if Adobe can fix this : )
    happy new year everyone.
    j

    really?  : )      (hint..... the smiley face thingy is a clue that possibly there is a little bit of satire amidst the post)
    I'll try it again and see if it works...
    thanks for the reply ; )

  • Vibrating alarm clock on iPhone 4 did not go off

    I set the alarm clock on the iphone to wake me in the morning.  I had it set to vibrate.  I happened to wake up a few minutes before the set time but the phone did not vibrate at the time it was set for.  There was just a notice saying the alarm happened.   But if I test the alarm and set it for a couple of minutes from now it will then work fine.  The sound plays and it vibrates.  I actually would prefer it didn't make any sound but then it doesn't vibrate either.  Weird.   Does the alarm clock get turned off when the phone sleeps?  Is it possible for it just to vibrate without sound?

    open your clock app, tap edit, select the alarm you want to apply the sound or song to then tap sound. Any songs available in the preinstalled music application can be used along with any ringtones currently on your phone.

  • Iphone alarm clock didn't work this morning

    I set a one-time alarm two days ago and it worked (it went off at 8:20am). This morning at 1:00am, I turned this alarm on again. But it didn't go off. So I did a test: set the alarm time to 10:00am and the alarm didn't go off. Fortunately, I used my wife's phone as a backup.
    So the alarm problem is not fixed by itself (The claim by apple that it would be fixed automatically after Jan. 3rd is not true). It seems that this problem only happen during weekend?
    The clock app on iphone is just a toy, don't count on it!!! Apple don't have any programmer to fix this problem or just don't care about the users. Apple is becoming another Microsoft.

    The clock app on iphone is just a toy, don't count on it!!! Apple don't have any programmer to fix this problem or just don't care about the users. Apple is becoming another Microsoft.
    Apple does care about this issue, the problem is being worked on.
    For anything remotely important ALWAYS use a real alarm clock. Never depend on any cell phone for critical functions.
    The alarm clock on my iPhone is working perfectly.

  • Does alarm clock drain down our iphones' batteries?

    Well, I went to App store and looked for "alarm clock free for iphone." The results appeared are vary. But the question is I don't know if these apps would drain down our iphones' batteries due to the fact that we must run the app through the night in order to show the digital clock and let it wake you up in the morning. Please help me answer this question. Appreciate it!

    I have used the phone ( and my BlackBerry in the past ) as a clock, with alarm when and if needed in this fashion for years. ( pretty much all my phones since Lithium ion batteries became the norm, in lieu of NiCad or NiMh ) .... Never had a problem and the original factory battery usually outlived the phone. Battery does get exercised with use in the day, and charge cycles ( the criterion specified for battery life) are significantly reduced.  I suspect one of the 'requirements' to run the battery wayyyyyy down has something to do with re calibrating  the battery gauge , but I personally have never had battery life issues with any phone ( maybe just pure luck, but ..... ). Also, here in the Caribbean, where power black outs aren't uncommon,  its nice to know your trusty cell is charged ....  When the power goes out, it may be 20 min or 4 hrs..... So if/when that happens , I turn off Bluetooth and wifi right away.  With modem & router unpowered, thus no wifi, it will help conserve battery by preventing phone from searching for a signal which ain't there :-)
    David 

  • Ihandy alarm clock pro no sound

    I have used the ihandy alarm clock for a few years on my 3GS no problems.
    It's great as you can set the alarm to your choice of music and give the phone a shake to snooze rather than push buttons
    Since upgrading to an iphone 5 the alarm has failed to go off on three occasions... slept in once, wife's alarm got me off the hook the other twice
    The first time I thought I had forgot the alarm or had the sound turned off. All other sounds on the phone were silent. A reset fixed things
    The second time the display showed that the alarm was running but there was no sound. A reset was required to get any sound out of any application
    On both occasions the sound button was set to on.
    I wasn't able to reproduce the problem and neither was the person at the Apple store but they replaced the phone THANK YOU
    That was a week ago and it has been fine till this morning... same problem, saved by my wife's alarm
    There are a few posts about similar irrefular problems but no apparent conclusive solution
    Any ideas please?
    Thanks
    Peter

    I've had the same problem with the iHandy alarm clock on my iPhone 4.  Sometimes the alarm works fine, but randomly (twice per month?) it will appear to be alarming, but with no sound.  Once that happens, there's no sound from any app, and I can only fix it by rebooting the phone.
    I've tried checking the sound on the phone every night before going to sleep, but even that's not a reliable precaution.  One time the alarm sounded normally at the alarm time - I pressed snooze and went back to sleep - then the alarm failed to sound at the snooze time. 
    I switched back this week to the "12,24 Alarm Clock Sleep Music" app - it's an older app and doesn't have as many features as iHandy, but I haven't had reliability problems with it.
    I wonder if iHandy's "background alarm" functionality somehow conflicts with the iOS?  The 12,24 clock doesn't have that feature, which is one of the reasons I switched to iHandy clock - but it's more important to have a reliable alarm.

  • HT4972 since update to IOS 5.1.1  -  problem with iluv IMM173 DUAL DOCK ALARM CLOCK DOCKING STATION. - CRASHES WHENEVER UPDATED IPHONE 4S CONNECTED

    Hi, since most recent update (IOS 5.1.1) to my iphone 4s, I am experiencing problems(ONLY SINCE MOST RECENT IOS 5.1.1.UPDATE) with my 'iluv' IMM173 DUAL DOCK ALARM CLOCK DOCKING STATION.
    Every time I connect my iphone it causes the docking station to crash/freeze and become totally non-responsive. However, if I remove my iphone, then connect my wife's
    iphone 4 (IOS 5.0.10) The docking station then syncs time and date as normal with the iphone, and reverts back to function normally.
    Has anyone else experienced the problem please, and if so, is there a remedy ?

    macbarbicus wrote:
    1.  I cannot open my camera from the home screen.  The icon is there but when you click on it it shakes and starts to open up but than slides down back to the home screen.  I have tried closing the camera app resetting my phone but nothing seems to fix it.   I can still open up the camera regularly by unlocking the phone first and than going to the camera app.  But the camera button on the home screen just doesn't work for me anymore.  I know with 5.1 they made it where it wont disappearing from the home screen so my guess is the issue must be related to that somehow.
    From the locked screen, swipe the camera icon upwards to open the camera app.  This is a new feature in 5.1.

  • My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    Hello there philp_69,
    If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I have had my iphone 4 for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

    i have had my iphone 4s for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • IPhone alarm clock via speakers

    Hey,
    I wanted to ask if the sound of my iPhone alarm clock is transmitted to speakers while it's connected with the Apple Universal Dock. I tried it with a 3.5mm wire but no sound was transmitted.
    Does anybody have some experience with the iPhone alarm clock and speakers?
    Thank you very much
    Philipp

    you should get a Kicker and download the kicker kickstart app great sound loud sound and an alarm

Maybe you are looking for

  • Should I do a fresh install?

    Hey guys, I purchased my unibody macbook (Intel core 2 duo 2.4 GHz, 4GB ram, 256 SSD, NVIDIA GeForce 9400M 256MB, running 10.7.2) in April of 2009 and have been using it exclusively ever since. Recently, my computer has begun to slow down quite a bit

  • Unable to get my Alphatrack working correctly in Adobe Audition CS6

    I am getting very frustrated with Adobe CS6 Audition, I cannot get my Alphatrack device to work properly. Also has anyone any experience of setting up Alphatrack as a Mackie device and how to setup button assignments Thanks

  • No Print of the Customer Receivables Ageing Selection Criteria Page

    Hello. I would like to know how can I print the Customer Receivables Ageing / Supplier Liabilities Ageing Report without printing the selection criteria page, because when I try to print these reports I always get the selection criteria page. I've se

  • Passing input data to RFC

    I have Date,Name and Telephone number input fields ,once user enter these values i have to pass this input to RFC. 1) I created three context attributes Date,Name,telephonenumber (both in view and Custom controller) 2)There is a mapping between view

  • Mac pro 2006 won't boot after lion install

    hi, under 10.6.8 everything worked fine.  All adapters and peripherals were functional. After a normal looking lion install my mac pro 2006 will not make it past the boot screen (Grey Apple logo with spinning wheel).  After a while the spinning wheel