Im a long time Android user switching to the iphone 6 plus. What is the experience of the first time iphone users switching from Android
I had the Gal note 3 then was given a SGS5 for a replace because the Note3 had issues.
Couldnt stand the screen size so I had to go back to the larger screen.
I decided to go with the iphone 6 plus.
So for those who have made the switch from android to apple for the first time what
has you experience been like.
I am an ipad user but want to know peoples opinions that have switched phones.
One thing I dislike and I know you can change it; it seems like google want to
force you to use chrome which I cannot stand
Hi zharvey85,
I truly apologize for your experience at the store. However, we provided the pre order as a way to avoid needing to go to store as inventory availability are subject to change without notice. The pre order secures the device and the other email was for the shipping information. Perhaps you can re order the device online to get the ball rolling for you to get your iPhone 6 plus as desired as opposed to going to the store of which inventory can change depending on the availability.
Thank you!
EdW_VZW Follow us on twitter @VZWSupport
Similar Messages
-
hi, updated my iphone where in the middle of updated the screen showed i must connect to itunes. after connecting to itunes my iphone was updated but everything was deleted. was first time on itunes , so have no backup. can i recover my pics and contacts? please help
If this has happened more than once the problem is likely on your PC.
See here: http://www.apple.com/support/iphone/assistant/itunes/ -
hi ..... i forget my icloud id and i format phone with pc when it turn on it say (activating iphone) now plz plzzzzz help my i get this iphone before 10 days ONLY this is my first time to use iphone plzzzz help
but i already try to remember ,,,,,,,,,,,,, that mean my iphone it will not open again
-
I have "The Sims" suite (The Sims, Livin Large, House Party, Hot Date, and Unleashed). During the original installation, I could not get teh third disk to install (House Party). I definitely installed them in the correct order. Then, I went on to load the last two CDs, but when I install the last CD, to begin play, the game locks my system downafter the preview.
I sent the entire Application to the trash (I'm assuming installing this in the Applications section of teh HD is correct), and tried to re-install. Now, the initial Installer on The Sims primary CD will not respond. I have to force quit to unlock the install.
I have an iMac with the 3.06 GHz Intel Core 2 Duo, with 4 GB Memory (4 GB 1067 MHz DDR3).
Can you tell me if I'm doing something wrong, or if my system does not have enough memory to handle this program? I already have The Sims 2 and 3 with several expansion packs installed - never had a problem operating or installing them. I still have at least 50% of my internal memory available.
Thanks,
JoeFor some reason SpeedGrade updated through the Application manager. I tried downloading the updates from adobe's website but it won't install. Prelude's update fails before it can even get started whereas the extension manager does install but it doesn't seem to be updating.
I've done as much investigation as I can think of and I'd rather not create a new user just to check that out but if I have to I will. How exactly do I create a new user on a mac? -
Many times my laptop s temperature getting vey hight,what does that means guys ?
Try going to About this Mac, under Apple menu, more info, in the left column hard ware click power. Under battery info see what it says under battery health>condition. If not normal, the battery probably needs service (replacement). You want take it to the Apple store to have it replaced, as this can other more serious issues if left un-tended to.
-
please let me know if you know of any good apps to sync up several ipads in a room with one person in control. I'm looking for an app that will allow a presenter to control what's on display for several other ipad users in a room. I'd like to be able to do presentations over the ipad, but i want the presenter to control the screens so folks in the meetings don't get distracted by playing with the ipad. i'd like to avoid using a web meeting service and do this without having to connect to any kind of network since i'll often be doing this outside of my office.
Try http://mysyncpad.com/. I'm not sure if it will do all you need, but it's the closest I've seen.
-
I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got. -
am first time mac book user, could someone assist me in deleting the junks in my cache, cookie etc., and how useful the mac keeper software is?
AshwathRaj wrote:
am first time mac book user,
In General 3rd Party AV Software and Cleaning Utilities tend to cause More Issues than they claim to fix...
They are Not Required...
Mac OS X tends to look after itself.
See > http://www.apple.com/osx/what-is/security.html
More Info Here > https://discussions.apple.com/thread/4545776?tstart=0
The Safe Mac > http://www.thesafemac.com/mmg/
AshwathRaj wrote:
... and how useful the mac keeper software is?
See Here > Beware MacKeeper -
My 2 notebooks running XP will no longer detect the BEFW11S4 WAP, what can I do?
My 2 notebooks running XP will no longer detect the BEFW11S4 WAP, what can I do?
The connections just stopped yesterday. Both laptops work OK when connected by ethernet cables and my main PC running XP64 connected also by ethernet is not affected.
Both laptops can see my neighbour's wireless network and worked OK with my son-in-laws network last night when I took them over to his house.
Can I assume that the "wireless component has died?
Any recommendations for a direct updated replacement?
I'm currently connected to NTL broadband but may at sometime switch to Sky broadband in the future but I understand that I would not be able to do this with my NTL phone line.Thanks for the comments Charrie21,
SSID Broadcast is enabled,
Of the 3 leds on the front left:
WLAN ACT is not illuminated
WLAN Link is illuminated [According to the instruction because it is connected to a cable modem],
POWER is illuminated.
Of the 3 leds on the front right:
LINK is illuminated,
ACT is not illuminated,
Diag in not illuminated.
The router has been reset several times.
SSID has been changed several times
Channel number has been changed several times
WAP was previously 64BIt and has been changed to 128Bit
Firmware version is the same date as currently on the Linksys web sute for this model.
I am thinking the "wireless" component is dead. -
Unhandled exeception has occurred in your application. On first time instal
I am installing on a server 2003 for the first time. After loading it on the server, I begin to run Installer for my frist instance. After clicking finish on the 'Installation Tasks' screen, it runs until it gets to the 'Installing Webfiles'. This is where I get the error. As I said this is a first time Web Tools 6 install. I have a copy of the error message here:
SAP Business One Web Tools Installer.
Unhandled exeception has occurred in your application. If you click Continue,the application will ignore this error and attempt to
continue. If you click Quit, the application will close immediately.
Some or all identity references could not be translated.
DETAILS:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at System.Security.AccessControl.FileSystemSecurity.AddAccessRule(FileSystemAccessRule rule)
at Installer.Workers.FileWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
Installer
Assembly Version: 2007.0.630.10
Win32 Version: 2007.0.630.10
CodeBase: file:///E:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Tools/Installer/Installer.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.ServiceProcess
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.ServiceProcess/2.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.DirectoryServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.DirectoryServices/2.0.0.0__b03f5f7f11d50a3a/System.DirectoryServices.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
ChilkatDotNet2
Assembly Version: 7.7.2379.17467
Win32 Version: 7, 7, 0, 1
CodeBase: file:///E:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Tools/Installer/ChilkatDotNet2.DLL
msvcm80
Assembly Version: 8.0.50727.1433
Win32 Version: 8.00.50727.1433
CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.1433_x-ww_5CF844D2/msvcm80.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Please help, I am at a standstill!!! and can't go any further on the Web Tools Installation.ASPNET is a local Windows user and when IIS executes .Net pages and has to access website files it authenticates to the system as that user. For instance, when you save changes to a theme, such as associating a catalog, you are writing to the files in the /assets/* directory and are doing so as the ASPNET Windows user. This user then needs to have write access to the /assets/* directories for the website to not throw an access denied error.
In IIS if you look at the application pool settings on the identity tab, you will see an option to choose which local user or group will be this designated "IIS user". Typically this is the local group "Network Service" which contains the local user ASPNET.
In the case of the Installer, it is attempting to give the correct permissions to the file directory that contains your website to the ASPNET user. Verify on that server if this user exists by looking at the computer management mmc snap-in then expanding Local Users and Groups and opening the Users folder. -
Contact Person Standard address data disappears on enter(first time)BP_CONT
Hi,
During the quick create contact person creation (via accounts), based on client requirements the screen setting has been changed. (UI Configuration).
BP_CONT/ContactQuickCreateEF
So we have data displayed from 2 context nodes.
1. BUILHEADER
2. BUILCNTSTDADDRESS
We have done the enhancement for this view so get the bespoke field called Dept.No, and to provide dropdown.
Now when we enter the data for the first time, and press enter, all the data entered in BUILCNTSTDADDRESS disappears.
However after first time, the data stays back on the screen (works normally).
But, if we dont press enter, and simply press the back button, the data gets properly saved.
Do anyone have any idea what is causing this to fail for the first time.
I bebugged for few hours to find that super class CL_BP_CONT_CONTACTQUICKCR_IMPL got a method called CHECK_DATA_WAS_CHANGED. This gets triggered which calls the onsumbitonenter twice.
I also tried bypassing the enhancement via user parameter and this works fine.
Any idea what is causing this?So, Rakesh, here you go:
We've needed to enhance method IF_BOL_BO_PROPERTY_ACCESS~GET_PROPERTIES of CL_BSP_WD_MIXED_NODE class in such way:
method IF_BOL_BO_PROPERTY_ACCESS~GET_PROPERTIES .
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$:(1):CL_BSP_WD_MIXED_NODE:IF_BOL_BO_PROPERTY_ACCESS:GET_PROPERTIES:END A
*$*$-Start: (1)---------------------------------------------------------------------------------$*$*
ENHANCEMENT 1 ZGET_MIXED_PROPERTIES. "active version
"Getting model's attributes
"if SAP still didn't do this
DATA: lcl_struc TYPE REF TO cl_abap_structdescr,
lv_struc_name TYPE abap_abstypename.
IF es_attributes IS INITIAL.
lcl_struc ?= cl_abap_structdescr=>describe_by_data( ES_ATTRIBUTES ).
IF lcl_struc IS BOUND.
lv_struc_name = lcl_struc->absolute_name.
IF lv_struc_name CS 'CRMST_ADDRESS_BUIL'. "do this only for addresses just for now
ME->MODEL_NODE->GET_PROPERTIES( IMPORTING es_attributes = ES_ATTRIBUTES ).
ENDIF.
ENDIF.
ENDIF.
ENDENHANCEMENT.
*$*$-End: (1)---------------------------------------------------------------------------------$*$*
endmethod. -
Running reports in CMC is Slow (the first time)
when we first log into CMC - the report takes 10 minutes or more to run.
when you run it subsequent times - it takes less than 15 seconds...
what could be causing this unbearable delay the first time?
I've seen some people say that you should build a blank report that users can run first - that is not a solution....
Has anyone had a similar experience?Check the same query on DB, notice how much it takes to run.
What might be happening here is, first time when it ran, that may be normal time it takes to run the report. After that, WEBI processing server (assuming you are running WEBI report) keep it in cache, so next time when it runs for the same data, it takes it from the cache, instead of querying the DB again. That is the reason, you see the results quickly. -
InDesign problem With Https cURL Seems Very Slow at first time to handshaking to server
I am trying to connect the server using cURL from Indesign, but when i am trying to call to server the indesign takes so much time to open and initialize the socket it takes 25 seconds at first time only, but On all subsequent calls it is fast,
*but when i am tryid that same programe with an c++ empty project it is very fast in 2 second we get a result back,
*So the Problem With Indesign Socket initialization using https at first time because i have tryid same Curl On Simple c++ program and it is fast at all calls
Specification:
I am Currently using
Indesign cs7 version 9.0
visual studio 2010
Can Anyone tell me why It happens,
my code snippet is as follows please try to find if anyone knows better.
curl_global_init(CURL_GLOBAL_ALL);
curl = curl_easy_init();
struct data config;
config.trace_ascii = 1; /* enable ascii tracing */
struct curl_slist *chunk = NULL;
curl_slist_append( chunk, "Content-Type: application/json");
curl = curl_easy_init();
struct AppMemoryStruct chunk1;
chunk1.memory = (char *)malloc(1); /* will be grown as needed by the realloc above */
chunk1.size = 0; /* no data at this point */
if(curl) {
curl_easy_setopt(curl, CURLOPT_URL, url.GetPlatformString().c_str());
curl_easy_setopt(curl,CURLOPT_SSLCERTTYPE,"PEM");
curl_easy_setopt(curl, CURLOPT_SSLCERT, "C:\\test\\omg.aps.net.pem");
curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, FALSE);
curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 2);
curl_easy_setopt(curl,CURLOPT_KEYPASSWD,"");
char error[1024];
curl_easy_setopt ( curl, CURLOPT_ERRORBUFFER, error );
/* send all data to this function */
curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, &AppWriteMemoryCallback);
/* we pass our 'chunk' struct to the callback function */
curl_easy_setopt(curl, CURLOPT_WRITEDATA, (void *)&chunk1);
/* some servers don't like requests that are made without a user-agent
field, so we provide one */
//curl_easy_setopt(curl, CURLOPT_USERAGENT, "libcurl-agent/1.0");
//curl_easy_setopt(curl, CURLOPT_HTTPHEADER, chunk);
//curl_easy_setopt(curl, CURLOPT_HTTPGET,1);
//heres the performance get down its around 25 seconds when i am calling The server Using Curl Object Having
//https url
res = curl_easy_perform(curl);
// till here
if(CURLE_OK != res)
errorCode = kFalse;
if(chunk1.memory)
free(chunk1.memory);
curl_easy_cleanup(curl);
return errorCode;
errorCode = kTrue;
if(chunk1.memory)
returndata.SetCString(chunk1.memory);
free(chunk1.memory);
/* always cleanup */
curl_easy_cleanup(curl);curl_global_init(CURL_GLOBAL_ALL);
please try to find a key issue why the performance is very bad using https.
Thanks,I was tempted to move this over to the InDesign SDK forum where there are coders, but there isn't a lot of traffic over there, so I'm going to leave this open here with the advice that you probably won't get an answer from anyone here becasue we are, for the most part, not folks who work with code beyond scripting (and very few scripters hang out here, either).
You should cross-post over there yourself and hope someone who understnds the qusetion sees it in one place or the other. -
Installing GroupWise 2012 for the first time
Hello,
I am looking for some help on installing GroupWise 2012 for the first time, and onto a brand new Windows 2008 Server. I have looked at some of the documentation for this, but I do not fully understand what I need to do. For example, I need to have eDirectory installed so I installed eDirectory on the Windows sever. I don't know what settings I need to use for eDirectory or if I even need a Netware server, too. I would appreciate it if someone could walk me through this step by step and provide me with values for a basic system I would appreciate it. My first goal is to learn how to install GroupWise 2012 on a Windows 2008 server. Once I understand this, then I can redo it and go from there.
Thank you for your help.
JohnHi John,
Let me see if I can be of some sort of assistance.... you don't need a NetWare server - besides they are obsolete.
I created the following set of instructions for somebody doing a first time install on Linux - perhaps just read around it and see if it works for you in a windows environment:
"on the server run the GroupWise install: ./install from the directory where you have the software
select "Create or Update a GroupWise System"
accept the license agreement
create the software distribution directory (default should be fine)
From the Select Software dialog select the Select All button
when the copying is complet select Creating a new GroupWise System
to start ConsoleOne select Run
when prompted with the Linux Mount Directory select OK
when prompted, take note of the steps yout ake to create a new system, then select OK
login to consoleone with your admin credentials
in the left pane select GroupWise System the select Tools | GroupWise Utilities | New System
select next
confirm that your tree is correct
select Extend eDirectory Schema check box and then select next
When prompted for a system name enter something simple like GWise
When prompted for a primary domain name enter a domain like gwdom1 (I'm keeping it generic in this scenario)
when prompted for a domain directory enter a path ie /opt/novell/groupwise/dbs/gwdom1
select next
Next to the domain context fields select the browse icon
browse to and select the container that will hold the domain (you might want to create an organisational unit called groupwise in your tree for this purpose)
next slect your language and time zone
when prompted for a post office name enter a poa name like gwpoa1 (again, generic in this example)
when prompted for a post office directory enter a path eg /opt/novell/groupwise/dbs/gwpoa1
the context for the post office is assumed to be the same as the domain
select the language and time zone for the post office
in the post office link dialog confirm that tcp/ip is selected
enter your ip address of your server
leave the ports at default - don't mess with these unless you know what you are doing!
in the IP address of the MTA (that would be your domain) enter the IP of your server
leave the ports at default
browse and add existing edirectory users to your GroupWise system
to create the GroupWise system select next
view the installation summary then select next
the final step is to install the agent software - select next
from the GroupWise agents configuration dialog select next
confirm that the check box for Launch GroupWise AGents on system startup is selected then select exit
exit the GroupWise installation program
from the terminal winodws enter rcgrpwise start to load the groupwise agents"
Good luck
Cheers, -
I got a macbook pro and i wanted to buy an app i had the money and everything and because it was my first time they told me to enter the answers to my security questions. problem is i dont remember them at all! HELPPP
Call Apple Care for your country and ask for help resetting the questions.
-
What java collection for large amount of data and user customizable record
I'm trying to write an application which operates on large amount of data. I want user could customize data structure (record) from different types of variables(float,int,bool,string,enums). These records should be stored in some kind of Array. Size of record: 1-200 variables; size of Array of those records: about 100000 items (one record every second through whole day). I want these data stored in some embedded database (sqlite, hsqldb) - access using simple JDBC. Could you give me some advise how to design thoses data strucures. Sincerely yours :)
Ok, maybe I give some example. This will be some C++ code.
I made an interface:
class ParamI {
virtual string toString() = 0;
virtual void addValue( ParamI * ) = 0;
virtual void setValue( ParamI * ) = 0;
virtual BYTE getType() = 0;
Than I made some template class derived from interface ParamI:
template <class T>
class CParam : CParamI {
public:
void setValue( T val );
T getValue();
string toString();
void setValue( ParamI *src ) {
if ( itemType == src->getType() ) {
CParam<T> ptr = (CParam<T>)src;
value = ptr->value;
private:
BYTE itemType;
T value;
sample constructor of <int> template:
template<> CParam<int>::CParam() {
itemType = ParamType::INTEGER;
This solution makes me possible to write collection of CParamI:
std::vector<CParamI*> myCollection;
CParam<int> *pi = new CParam<int>();
pi->setValue(10);
myCollection.push_back((CParamI*)pi);
Is this correct solution?. My main problem is to get data from the collection. I have to check its data type using getType() method of CParamI interface.
Please could give me some advise, some idea to make it right using java.If you have the requirement that you have to be able to configure on the fly, then what I've done in the past is just put everything into data pairs into a list: something along the line of: (<Vector>, <String>), where the Vector would store your data and String would contain a data type. I would then make a checker to validate the input according to the SQL databypes that I want to support on the project. It's not a big deal with the amount of data you are talking about.
The problem you're going to have is when you try to allow dynamic definition, on the fly, of data being input to a table that has already been defined. Your DB will not support that, unless you just store that data pair--which I do not suggest.
Maybe you are looking for
-
DML Error Logging with multiple tables = OALL8
I have a mapping that, via a splitter, loads 3 tables. This mapping works perfectly. Recently we upgraded to OWB 10.2.0.3 so we decided to make use of the new feature of DML error logging. So three error-tables where created and the "error table name
-
How do I update CS6 to camera raw plugin version 8.3
I am exporting from Lightroom 5 to CS6 and it says I need this plugin. I updated CS6 but still get the message
-
Hi, Does anyone have a success to WLI2.1 Clustering ? If you have, Please could you give me a guide ? thanks in advance DJ
-
Is there a modifier key to hold whilst moving clips vertically between tracks in the timeline to stop the clip moving sideways? Thanks Dean
-
User's default email address for use with Answers
How to use user's default email address for use with Answers? When I was referring to the Admin Guide I found the below description for email session variable. Can somebody please help me with this. Contains the user's default email address for use w