Im about to make a trip to the USA and i need to know the price of an iphone 4s 64GB unlokced please in order to carrie the amount of dollars
Im about to make a trip to the USA and i need to know the price of an iphone 64GB unlokced please in order to carrie the amount of dollars
"Same as what? " US of course.
So the price of an iPhone in the U.S. is the same as the price of an iPhone in the U.S. ?
Okay.
tymcziszyn asked how much an iPhone in the U.S. would cost. Nothing was mentioned about comparing the cost (which you seemed to be attempting to do but your post was a bit short.).
You really meant that the price of an iPhone purchased in the U.S and then paying import duties and VAT when taking it home would (likely be close to the) same price as if purchased in his home country.
and what if his home country does not sell the iPhone?
I understood what you meant but OP may not be native english speaker (though he seems to do well here) so making sure they get the entire message clearly may help.
Similar Messages
-
I am using InDesign CS6 for Windows. Information about my hyperlinks disappeared from my hyperlinks panel and I need to know how to restore it. I clicked on the panel and the hyperlinks section disappeared. I can see cross-references, but not hyperlinks.
1. Re: Information about my hyperlinks disappeared from my hyperlinks panel and I need to know how to restore it.
Thank you. I can see the word, and I tried dragging but there is no moving the divider. -
My family put multiple devices on the icloud, and I need to know how to manage duplicate entries. Specifically contacts. If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?
All devices signed into the same iCloud account will finish up with the same contacts. Of course if prior to joining iCloud two family members each had an entry for Uncle Fred, then you will finish up with two contact cards for Uncle Fred, and so on. If you tidy this up on your computer then the changes will propagate to everyone else.
-
I download the new IOS7 in my iPad beeing in the usa And where I come back to my country appears me again to upad te my iPad of ferina the IOS 7. I did it my iPhone And is not working as before.what i must do
I'm sorry, but I do not understand what you are asking or saying. Perhaps you could clarify a little bit.
-
i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I broke off the attachment to the headphones and I Need to know how do I get it fixed?
I Broke off the attachment To the headphones in the iPad Air I just bought! Can I just bring it in or do I need to schedule an appointment w/genius?
Front row is no longer supported in Lion.
There are workarounds though
http://9to5mac.com/2011/07/19/os-x-lion-kills-front-row-heres-how-to-get-it-back / -
hello? anybody an you help me!!!???
There is no backdoor passcode. If there was then the passcode would be poor security feature.
Yu have to connect the iPod to its syncing computer and restore via iTunes.
If you connect to a different computer you will have to place the iPod in Recovery mode and then restore via iTunes.
A restore will erase the iPod. -
I lost my ipod at the arena todat and I need to know how to find it ! thanks .
I lost my ipod touch today at the arena and i need to know how to find it ! thanks
Keep looking.
Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with your bank or any savings institution, contact them also and discuss approprate action with them.
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. Something as small as an iPod should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries. -
I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this
@Barbara – What purpose is that PDF for? Print? Web?
If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
A final resort to bring down file size is:
1. Print to PostScript
2. Distill to PDF
That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
I will place the PDF in InDesign, print to PostScript, distill to PDF.
Uwe -
I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them. I opened & printed the image on my PC using PAINT.NET. No lines appeared. I sent the image to my daughter. She printed it and found no lines. I printed the image using Seahorse on my Mac and the lines still appeared. I used basically the same print settings on Mac and PC.
maahes wrote:
did so now, only now I'm getting a slightly different error: could not find udevd no such file or directory. I checked both grub.cfg's and my mkinitcpio.conf and there's no listing for udevd ....which I've never heard of, so I assumed it was a typo?
For clarification: udev is in the mkinitcpio.
I'm not sure whether I yet have a good intuition for how you have your machine set up, but I suspect you need to include a cryptdevice flag to the kernel in your grub config. The file isn't found because the kernel doesn't know your root directory needs decrypting first.
My setup is an LVM over LUKS over LVM sandwich. To boot into my system, the grub.cfg contains the line:
linux /vmlinuz-linux root=/dev/mapper/cryptvg-root cryptdevice=/dev/mapper/vg-crypt:root rootfstype=ext4 pcie_aspm=force acpi_osi=Linux acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ro
Now, most of those flags don't have anything to do with your problem, but note the cryptdevice. It tells the kernel it's dealing with an encrypted filesystem sitting in a logical volume called crypt on a volume group called vg. The bit after the colon tells the kernel to associate this encrypted filesystem with /dev/mapper/root.
As for how to fix your system, I'm afraid I still feel a bit fuzzy about how your LVM and encrypted layers relate to each other, whether you have LVM over LUKS, or LUKS over LVM, or something else. Was there a particular how-to that you followed? -
i used to connect the ipad or iphone to computer to make the backup . I need to know where is the backup path on computer?
The following quotation is from iTunes: About iOS backups
Where are iTunes backups stored on your computer
The folder where your backup data is stored depends on your computer's operating system. Make sure the backup folder is included in your data-backup routine. iTunes places the backup files in these places:
Mac: ~/Library/Application Support/MobileSync/Backup/
The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista, Windows 7, and Windows 8:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press Return. -
Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, BrasilTukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/ -
I changed the card and i want to know how make to change the data from itunes. I tried and doesn't work. Please, Help Me!
No. That's not what I said. You can get an out of warranty replacement, which will be exactly the same model, color, and will be locked in exactly the same way the original is. If you want an iPhone 5, get the 4S replaced, sell it, and use the money to put toward a new phone.
-
I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model. I would like to unlock it and use in my country. How can I get it unlocked so the I can use my local micro sim card? What info about it do you need to assist me in unlocking it?
Sounds like you bought an AT&T no contract phone. You will need to contact AT&T for unlocking but they are only doing so for current and previous account holders. If you have never had service with them they will not unlock your phone.
-
I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model. I would like to unlock it and use in my country. How can I get it unlocked so the I can use my local micro sim card? What info about it do you need to assist me in unlocking it?
Contact the original cellular provider, as they are the only ones that can provide unlocking.
Maybe you are looking for
-
Error in report when executing pl/sql function body returning sql query.
Hi, I have used the pl/sql function body returning sql query for creating a report. I have created a datepicker( P10_TASK_DATE) which can be submitted.The code is as below DECLARE v_sql varchar2(3000); BEGIN if :P10_TASK_DATE is not null THEN v_sql:=
-
Hi We have an interesting problem regarding printing the JFrame. Our JFrame view is similar to some thing like this: |cutimg |copyimg |Printimg |Info | //Tool Bar panel |-------------------------------------------- | | Label Text Field | // Field
-
MAc won't save youtube video anymore. What am I doing wrong?
I was trying to save a video from youtube as I did a 1000 times before. Now when I try, every program/site I use (KeepVid for instance), will turn the .mp4 video file in a .txt file. Basically the file name will be something like video.mp4.txt I trie
-
T410 with Windows XP Professional availability ?
First it seems you cannot buy an XP downgraded machine directly from Lenovo anymore, even from the business portal (this is for business use). Can anyone confirm this ? Our company hasn't bought from lenovo directly before. We have always bought from
-
Can I copy a meta outline from one model to another model in EIS?
Hi All, I have 2 OLAP models in my EIS Essbase Integration Services. In the first OLAP model, there is already a meta outline. I want to copy this outline to the 2nd OLAP model. Can I do it ? If yes, then how? Kindly Advise. Thanks in Advance.