Im coming across a problem on photoshop cc 2014

I am trying to create a 3d text and its not letting me use the 3d tools or any tools at all. I try to use the filter gallery and none of it works, I have enough memory to do so and have got a graphics card capable but it still wont let me 3d render even when I looked on preferences and made sure the graphics card box is checked. Can someone help please its really irritating

I used RGB 8 bit aswell as 16 and 32 bit, but unfortunately none of them work as the 3d menu is still greyed out and 3d render is still unavailable

Similar Messages

Performance problems with Photoshop CC 2014 in combination with the imac retina 5k

Hello,
I've been using the new imac retina, and i have enormous problems with the performance of Photoshop. If i for example use the selective color correction, this does not run smoothly. Other functions also work delayed. I noticed if i do not use Photoshop in full screen mode, everything goes back to normal. A friend used the predecessor model imac without 5k resolution, but has no problems. I suspect Photoshop has problems with the resolution of 5k.
Anyone here who has the same problem?
Specs:
4GHz Intel Core i7
24 GB RAM
AMD Radeon R9 2048MB
Photoshop CC 2014.2.2
Thanks for help
greetings Manuel

I hope Adobe fixed this problems with the next updates! With this terrible performance i cannot work. I actually just bought the new iMac Retina, because my old model was too slow... and now the Photoshop Performance is slower than on my old iMac. I have read that other users who have also a 5k iMac, report on same problems. So i hope that a update or a solution for this problems come very quickly!

Problema:Adobe Photoshop CC 2014 dejo de funcionar?

@Hola, tengo una laptop con windows 7, ase días subí a windows 8.1 Pro, cuando intente instalar photoshop cc 2014, al abrirlo, me parecía un mensaje que decía, que Photosho ha encontrado un problema con el controlador, le daba en OK y me salia el una ventanita que decía Adobe Photoshop CC 2014 dejo de funcionar y se cerraba. Pero antes busque como solucionar el problema, leí que actualizando el controlador de windows, con eso se solucionaba, lo hice, y seguía igual. Y creí que era un problema de compatibilidad con windows 8.1, después baje a mi windows antiguo windows 7 descargue el photoshop cc 2014 nuevamente, y al abrirlo, me salía el mensaje Adobe Photoshop CC 2014 dejo de funcionar y se cierra, ya intente actualizar el controlador, y sigue igual. Me molesta mucho, porque antes de subir a windows 8 tenía photoshop cc y me funcionaba perfectamente. Ase días también formatea la laptop de mi hermana, la lap de ella tiene windows 8 de fabrica, y al instalarle los programas, le instale photoshop cc 2014, y al abrirlo me salia la venta, de Photosho ha encontrado un problema con el controlador lo actualice y sigue igual.. Qué hago?? no se por qué pasa, eso... Y obviamente, también intente desinstalarlo e instarlo, y sigue igual..

Which module does your system crash reports show failed when Photoshop stops working.

Problemas con Photoshop CC 2014 y SONY UP-DR200 funcionando con windows 8.1.

Hola. Tengo una impresora SONY UP-DR200 funcionando con windows 8.1. Todos los programas que tengo trabajan con ella y Photoshop CC (la version anterior) tambien, pero desde que he instalado esta version (CC 2014) no puedo imprimir con ella desde Photoshop, me dice que no existe y me imprime en la que esta como predeterminada en el sistema windows, que es otra. ¿Que pasa?
Con esta impresora si funciona
Pero con la Sony no funciona

So after two months of running Photoshop CC 2014 without a graphics card it has now started messing up - large transparent blocks in the middle of my page. Sony are completely useless. Graphic drivers haven't been updated since last year. Every time I try to email them the site 'crashes' and it doesn't send. I have now learnt that the brand new laptop I bought in May 2013 got discontinued along with every other Vaio laptop in Feburary 2014. I am so fed up and have no idea what to do now. Any suggestions GREATLY appreciated.
Sofie

"There was a problem installing Photoshop CC (2014)" error for a year

I've been trying to install Photoshop for over a year (haven't really needed it yet, and now I do), and get the same error every time.
It gets through about 45% of the download (always the same percentage, roughly), and then gives up and says "Installation failed--learn more."
When I click on the learn more link, I get a web page saying exactly:
<<
Exit Code: 34
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s)
FATAL: Payload 'Camera Profiles Installer_8.3_AdobeCameraRawProfile8.0All 8.0.0.15 {3E2A282C-3E78-44F4-AB5F-021300B2CEE0}' information not found in Media_db.
>>
It's always this same error.
I've had this error since the pre-release, and I suspect it has to do with being part of the pre-release program. (We're an Adobe plug-in developer, a Silver Partner--been developing plugins since before InDesign 1.0 shipped.)
Yes, I've uninstalled the Creative Cloud and re-installed a couple of times, from scratch. I've also tried the Cleaner, which hasn't helped.
I'm now officially stumped.
Can someone from Adobe help fix this?

I do not work for Adobe... you need to contact Adobe... try the chat link I posted
>do this to 300 Macs
Are you using the enterprise installer?
Team Installer http://forums.adobe.com/thread/1363686?tstart=0
http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent
And, some Mac links that may help
next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

Trouble with Adobe Camera Raw, Nikon D750, Photoshop CC 2014

I have Photoshop CC 2014 running on an HP ZBook 15 with Windows 7 Professional. I recently downloaded Camera Raw 8.7.311. I did not install the DNG converter. I shoot raw in my Nikon D750. I download the NEF images to my HP laptop using a memory card reader. I installed Bridge from Creative Cloud. When I check in Photoshop CC 2014, it says the Camera Raw 8.7.1.311 plug-in is present. But if I try to open a NEF image, it fails and says it is an unsupported file type. When I go into Bridge, the "Open using Camera Raw" option is faded and cannot be selected. So what do I do? TIA, Rob

Success! My problem was I had the old version of the Nikon software on my computer and I had used that to download the photos. I copied the NEF files directly from my memory card reader and then could open them no problem in Photoshop CC 2014. Many thanks to gener7 and all who made suggestions.
Rob

Photoshop CC 2014 crash when opening or creating new files when running with Cintiq 13HD.

I have a problem where Photoshop CC 2014 crashes when trying to open or create a new file while the Photoshop window is being displayed on my Cintiq 13HD.
When Photoshop is being displayed on my main monitor it doesn't crash.
I'm running Windows 7 (64 bit) and have updated my graphics and wacom drivers to their latest versions and Photoshop is completely up to date. (I'm running the 30-day free trial)
Here's the event log of the crash:
Faulting application name: Photoshop.exe, version: 15.2.1.257, time stamp: 0x543dbc5e
Faulting module name: atig6txx.dll, version: 8.14.1.6398, time stamp: 0x54176130
Exception code: 0xc0000005
Fault offset: 0x00000000000122b7
Faulting process id: 0x23dc
Faulting application start time: 0x01d0030b1092334e
Faulting application path: D:\Program Files (x86)\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\Windows\system32\atig6txx.dll
Report Id: 61680f48-6efe-11e4-aeeb-bc5ff45851ea

As you can already see, your ATI/AMD video card drriver is crashing.
Update the driver from AMD's website to pick up all the bug fixes you are missing.

Photoshop CC 2014 on Windows crashes everytime

Hello
I have Adobe CC installed on my work computer and a handful of the apps on my home computer. Just tried Photoshop CC 2014 on the home PC (Intel i7, 8MB RAM, AMD7570 gfx) and it ALWAYS crashes after the launch and initial prompt to import settings. Photoshop CC 64-bit (earlier version) is running fine. It doesn't matter if I say yes or no to the import settings.
Crash log has all this...
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 15.0.0.58
Application Timestamp: 536b438e
Fault Module Name: aticaldd64.dll
Fault Module Version: 6.14.10.1607
Fault Module Timestamp: 4ea7647e
Exception Code: c0000005
Exception Offset: 0000000000441382
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: dd55
Additional Information 2: dd55198a6a1e8431eebab190b03ca471
Additional Information 3: 8159
Additional Information 4: 815945626f49fa66c5afed4cff35fc96
I have installed the 7.2 release of Extension Manager CC. Little else can be tried since it crashes so quickly.
Thoughts?

Thanks John,
That put me on what should have been a straightforward update drivers path. And ultimately was the correct answer.
I did not mention this was a Dell XPS 8500. It may have been some misstep I took or some proprietary quirk of Dell, but ultimately the Catalyst Control Center would not recognize the card or load any drivers. At one point it said I had a mobile device (?).
So I went back to the Dell site with my service tag and got their update utility. It said I needed a video driver update (among other things I never use) and did its work.
Now Catalyst reports I have an AMD Radeon HD 7570 with a BIOS date of 2012/01/16. I'm pretty sure there are newer, but at least my problem with Photoshop CC 2014 crashing is gone.
Thanks again!

Photoshop CC 2014 3D menu functions greyed out

I can't seem to get 3D options enabled in CC 2014. I'm using a 2012 Macbook Pro Retina with 16gb of ram & a 1GB 650m running 10.9.3 and that well exceeds the system requirements.
I have "Use graphics processor" selected in the performance tab and the 3d tab shows 970mb of available VRAM but all the 3d options are still greyed out, I even used a 3rd party app to force my laptop to run at a non retina resolution and that pushed available VRAM over 1000mb but it didn't help. I've tried restarting the app and computer.
I opened up CC (2013) on the same machine and the 3d options are there and the 3d performance is very good and snappy so I can't see any good reason why adobe would artificially limit the 2012 retina macbook pro to not be able to use the feature at all.

Hy,
I had the same problem with Photoshop CC 2014. I have on-board video card with shared memory. After I changed the video card RAM to 512 and set the Photoshop Preferences to maximum, the problem was resolved.
I attached a photo to see more details. Hope you will solve the problem soon .

Too much RAM consumption in Photoshop CC 2014.

Hi people,
Since the update to Photoshop CC 2014 I'm having serious problems with the amount of RAM used by Photoshop.
When opening a file (only) 245 MB big, Photoshop uses around 3.5 GB of RAM. As a result my PC is extremely slow.
This was never the case in previous versions. Files made in previous versions are now hard to work on in the CC 2014 version.
Some bigger files are now useless. It takes forever to open them and impossible to work on because of this RAM issue.
I can not open other apps or even browsers at the same time anymore, because Photoshop consumes too much RAM.
Is it normal Photoshop uses 3.5 GB RAM while the file is that small?
When comparing with other Adobe (CC 2014) software only Photoshop uses that amount of RAM.
If you look here http://helpx.adobe.com/photoshop/system-requirements.html#Photoshop CC 2014 system requirements and language versions
you can see the minimum requirements of RAM:
Photoshop CS5:            1GB
Photoshop CS6:            1GB
Photoshop CC:             1GB
Photoshop CC 2014:     2GB (8 GB recommended)
OK, new versions need more RAM, I understand. But in my case it seems like 6 GB is not enough.
And I have the feeling even 8 GB won't be enough too.
Can someone please tell me if there's a problem with Photoshop CC 2014, will this be solved?
Or is this normal behaviour, and should I buy more RAM?
Buying more RAM is of course the easiest answer to solve this.
But don't you think the jump from 1 GB to (minimum) 8 GB RAM is very big?
And like I said, I don't think 8 GB will cover it too. Then how much will be enough?
Thnx in advance!
I have:
OS:                                Windows 7 Pro
Processor:                      Intel Xeon CPU W3550 @ 3.07 GHz 3.06 GHz
System Type:                 64 Bit PC
RAM:                             6 GB RAM
Available Disk Space:     283 GB
Kind regards,
Lester.

Ok, thnx for the reply!
I bought more RAM.

Installation error with Photoshop CC 2014

I'm having a problem installing Photoshop CC 2014 on my Windows 7 64bit pc. I am using the CC panel to install the software and it indicates it is installed, but when I open the software after I get past the splash screen I get a popup saying Photoshop CC has stopped working and my only option is to close it and try again. I have tried uninstalling the software via Windows control panel and reinstalling via the CC panel after a reboot, but to no avail. Any ideas ?

Hi MMSmyth,
Please use the CC Cleaner tool ( Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 ) to remove the software completely.
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing from CC and check.
Regards,
Rave

Crash Photoshop CC 2014

Hi,
I encounter a problem launching Photoshop CC 2014 (2014.0.0). Attached is a screen
Error : color parametres
I typically create the package with default options.
After Effects and Illustrator works fine. I used the same virtual machine with a snapshot.
Thank you for your help

Hi,
I have also the problme with Visual Studio 2013.
Thanks

Photoshop CC 2014 exe.

Hi all
I'm having problems setting Photoshop CC 2014 as the default programme for psd files.
After I've un-installed Photoshop CC and installed CC 2014 all my psd files changed to QuickTime icons.
I tried and set them back to psd file format and it doesnt even work.
Does anybody know why this is happening?
Your help is greatly appreciated
Cheers,

Just so anyone that sees this will know the sequence of events:
I updated Photoshop CC 2014 and many other CC updates today
I restarted my machine (Windows 7 Pro)
Clicked Photoshop Start Icon
Photoshop did not start, but Photoshop.exe appears in Windows Task Manager (WTM) under Processes tab (approx. 8 MB of Memory used)
If I click Photoshop Start Icon multiple times, multiple EXEs appear in WTM
Tried right-clicking Photoshop.exe(s) and Ending Processes, then Running Photoshop again (same result)
Restarted my machine a second time
Now Photoshop CC 2014 runs
I will add an update here if things change.
Thanks for the help everyone!

Updated my iPhone to new iOS6 and my Memory Loader app does not work! Is there a fix for the problem as it seems I am not the only one coming across this issue?

Updated my iPhone to new iOS6 and my Memory Loader app does not work! Is there a fix for the problem as it seems I am not the only one coming across this issue?

Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app. Also, deleting old texts can free up some room.

The latest update to CC has caused brush lag across all versions of Photoshop. How can I fix this?

Ever since this past week's update to CC, I have noticed a decrease in performance across all versions of Photoshop I have installed, CS6 and CC. Many of the brushes I have, both in Photoshop's default and my own custom sets, lag horribly when drawing. My system had not previously had this issue as far as I can tell. Just to be safe, I have tested Photoshop on other builds, a macbook pro and a near top of the line PC. The lag happens across all systems. I've tried drawing with just the mouse and the Cintiq 12WX and the responsiveness is the same.
For the sake of this case, here are the specs of my main work computer. All drivers are up to date, as is the OS:
Processor: Intel Core 2 Quad CPU Q6600 2.40 GHZ
RAM: 8 GB
Operating System: Windows 8 (64-bit)
Graphics Card: AMD Radeon HD 6700 Series
Hard Drive: Samsung 830 256 GB Solid State (where my scratch drive is)
Monitor: 2 X Dell U2410
I have tried altering the OpenGL settings and disabling them altogether on all builds, including this one. There is no change in the lag of the brushes.
For the sake of complete clarity, these are the specs of the near top of the line PC and the Macbook, which both had the same issues:
The PC:
Processor: Intel Core i5 3570K 3.4 GHz, overclocked to 4.4 GHz
RAM: 16GB DDR3 1600 MHz
Operating System: Windows 8 (64 Bit)
Graphics Card: 2 X EVGA Nvidia GTX 670 4GB SLI
Hard Drive: 2 X Samsung 840 Pro 256 GB SSD, Raid 0
Monitor: Apple 27" Cinema Display
Macbook Pro:
Processor: Intel Core i7 2.7 GHz
Operating System: OSX 10.8 Mountain Lion
Hard Drive: Western Digital 500GB 7200 RPM
Graphics: Nvidia Geforce 630M
I've also tried completely uninstalling and re-installing Photoshop CS5 and CC on my work computer, which still did not solve the issue.
I am a freelance artist and this sudden lack of performance is putting a cramp in my deadlines and possibly in my income stream, if I cannot solve this issue quickly. Please advise!

I have some new info on the issueI thought I'd share with you.
First of all, I've installed Photoshop CC on my SurfacePro (Windows 8) and do not have the lag issue there. It's very similar hardware to my MacBook Pro. So the issue must have something to do with my MacBook.
After a lot of tinkering I discovered that it is my 27" Thunderbolt Display that is causing the brush lag. When I unplug it and only use my built in 13" screen the brush lag is gone. Aha!
I tried every available option in the Performance section but nothing helped. Again, Photoshop CS5 with attached Thunderbolt Display doesn't have a brush lag issue.
I'd be interested to know everyone else's setup who is experiencing this problem.

Im coming across a problem on photoshop cc 2014

Similar Messages

Maybe you are looking for