Im confused... Please give me a straight ans

Hi everyone i just purchased a MicroZen today and i was reading the manual. In the manual it said "Handling cord(s) on this product may expose you to lead, a chemical known to the state of California to cause cancer and birth defects or other reproducti've harm. Wash hands after handling." Can someone please help me, me and my parents got worried when i read this please help. Thanks

All,
We can't say that there is nothing to worry about, but it is something you should be informed about. California law states that notification should be given if a product contains certain amounts of lead. Many types of electrical cords use small amounts of lead to make them more flexible and the USB cord used with many of our products is no different.
I believe a more official source of information regarding the Lead disclaimer, it's origin and purpose, can be found here: <FONT face=Helv color=#000099 size=2>http://www.oehha.ca.gov/prop65.html
<FONT face=Helv color=#000099 size=2>
<FONT face=Helv size=2>Daniel

Similar Messages

BT please give me a straight answer.

Following the announcement of price increases from January 14, I understand that if you feel charges are to your detriment as in the BT terms and conditions, you may leave an existing contract early. I am contracted into BT Infinity until November 14.
I have not yet received a personal letter but I believe my broadband charges are increasing according to this link, from £26 to £27.67.
I have emailed BT and got an automated response which wasn't very helpful. I have contacted them by Chat but that wasn't working correctly and they attempted to ring my landline. No offense, but I want this in writing.
All I want is a straight answer, can I leave my contract without penalty or not?

To quote from that page:
If, as a result of these price changes or changes to terms, you decide to terminate your affected service(s), you may do so without incurring the Early Termination Charge(s) that may otherwise be payable. If you wish to exercise this right you must contact us within 10 days of receiving the notification sent to you personally. You will still be liable to service charges up to the date of termination.
If you haven't personally been advised of the change, you can't cancel yet.
See also the BT Terms and Conditions http://www.productsandservices.bt.com/consumerProducts/dynamicmodules/pagecontentfooter/pageContentF... paragraphs 51 to 54 for more detail.

Apple -clueless about its own software !! can anybody give me a straight answer to this ?

APPLE - clueless about its own software !!! Can anybody please give me a straight answer to this question - how do I zero out my Apple SSD ??
I have spoken to Apple engineers in-store and via phone support and nobody seems to know how to do it, in fact the guys at the retail store were not even aware that the option for secure erase has been disabled for macs with SSD running Lion. Now im aware that some people will say this is to protect the lifetime of the SSD, but this is irrelevant as Apple SSD's running Lion has TRIM utility. Furthermore to save people's time you cannot do it by externalling booting or by holding down C or CMD+R !
So, has anyone got a simple method for this, it cant be impossible !
Please help

mj25 wrote:
APPLE - clueless about its own software !!! Can anybody please give me a straight answer to this question - how do I zero out my Apple SSD ??
I have spoken to Apple engineers in-store and via phone support and nobody seems to know how to do it, in fact the guys at the retail store were not even aware that the option for secure erase has been disabled for macs with SSD running Lion. Now im aware that some people will say this is to protect the lifetime of the SSD, but this is irrelevant as Apple SSD's running Lion has TRIM utility. Furthermore to save people's time you cannot do it by externalling booting or by holding down C or CMD+R !
So, has anyone got a simple method for this, it cant be impossible !
Please help
then if not coming up on google, apple or asking here, then is maybe impossible to do genius. you politeness get you lot of help here.

My iphone 4g problem is that i'm deleted my all apple i'ds and i'm create new icloud apple i'd but i am update my app but my mobile give me old i'd why to give me my old i'd i'm create new id so and i have no my old i'd passcode.i'm confused please helpme

my iphone 4g problem is that i'm deleted my all apple i'ds and i'm create new icloud apple i'd but i am update my app but my mobile give me old i'd why to give me my old i'd i'm create new id so and i have no my old i'd passcode.i'm confused please help me...:-(

fawaz92 wrote:
... i'm deleted my all apple i'ds ...
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622

Hi SAP FI/CO GURUS ...... PLEASE GIVE ME INTERVIEW QUESTIONS ON SAP FI/CO

Hi FI/CO gurus
I require your great help to get my brother into SAP House. He had done his FI/CO training and he is trying as fresher into SAP. So i request you to please give me interview questions on SAP FI/CO in topic wise. The reason i am asking here in this forum is, a lot of gurus who are having great experience are there in this group. if i get help from these gurus, that will be great help to my brother into get into SAP FI/CO.
So i request you to please send me interview questions on SAP FI and CO in topic wise. Awaiting for your reply.
Regards
Raj

Hi,
Please find below few questions on FI. I think those are very useful for intervew
SAF FI Technical Interview Questions 1
1. Tell me about FI Organizational structure?
Ans:     Client
               |
      Operating Concern
               |
Controlling area1       Controlling Area 2
         |
Co. Code 1 Co. Code 2
    |
Bus area 1 Bus area2 Bus Area3 Bus Area 4
2. How many Normal and Special periods will be there in fiscal year, why do u use special periods?
Ans: 12 Normal posting period and 4 special periods are in the fiscal year which can be used for posting tax and audit adjustments to a closed fiscal year.
3.Where do you open and close periods?
Ans: PPV is used to open and close the periods based on a/c types considering GL Accounts. Tr. Code. OB52.
4.What do you enter in Company code Global settings?
Ans: 4 digit Alphanumeric key.
Name of the company
City
Country
Currency
Language
Address
5.What is document type, and what does it control? Examples.
Ans: Document type is nothing vouchers containing line items. Several business transac! tions can be identified within a particular document type.
It controls the document number ranges.
It controls the Header part of document
IT controls the line item level of the document
Helps filing of physical document
6. What is posting key and what does it control?
Ans: These are special classification keys. Two character numerical key it controls the entry of line items.
Posting key determines Account type, Debit/credit posting, Field status of transaction.
7. What is field status group, what does it control?
Ans: FSG is mandatory field in ! GL Creation. You use this field to define which fields are displayed when you post business transactions to a G/L account.
A field may have one of the following statuses.
- Suppressed
- Display
- Optional
- Required
8. What is chart of account and how many charts of accounts can be assigned to a company?
Ans: Chart of account is a list of all G/L accounts used by one or several company codes.
For each G/L account, the chart of accounts contains the account number, account name, and the information that controls how an account functions and how a G/L account is created in a Company code.
You have to assign a chart of accounts to each company code. This chart of accounts is the Operating chart of accounts and is used for the daily postings in this company code.
You have the following options when using multiple company codes.
You can use the same chart of accounts for all company codes
If the company codes all have the same requirements for the chart of accounts set up, assign all of the individual company codes to the same chart of accounts. This could be the case if all company codes are in the same country.
In addition to the operating chart of accounts, you can use two additional charts of accounts If the individual company codes need different charts of accounts, you can assign up to two charts of accounts in addition to the operating chart of accounts. This could be the case if company codes lie in multiple countries.
The use of different charts of accounts has no effect on the balance sheet and profit and loss statement. When creating the balance sheet or the profit and loss statement, you can choose whether to balance the co! mpany codes which use different charts of accounts together or separately.
9. What does definition of a chart of account contains?
Ans: chart of account key
Name
Maintenance language
Length of the GL Account Number
Controlling Integration
Group chart of accounts (Consolidation)
Block Indicator
10. Can one COA be assigned to several companies?
Ans: yes. One COA can be assigned to several companies.
11) What is account group and what does it control?
Ans: Account group determines which fields you can configure on the G/L master record. It is necessary to have at least two one for B/S and another one for P&L a/c.
It controls the Number ranges of GL A/C.
The status of fields of the master record of GL belongs to company code area.
12) What is reconciliation account; can you directly enter documents in that a/c?
Ans: When you p! ost items to a subsidiary ledger, the system automatically posts the same data to the general ledger. Each subsidiary ledger has one or more reconciliation accounts in the general ledger.
We cant use reconciliation account for direct postings.
13) How do you control field status of GL master records and from where do you control!
Ans: Field status variant is maintained all FSGs.
14) What are the segments of GL master record?
Ans:
- COA Segment
A/C group
Nature of account
Short text
GL a/c long text
Trading partner
Group Account Number
- Company code segment
Account currency
Tax
Reconciliation a/c for a/c type
OIM,LID,FSG.
15) What does Field status group assigned to a GL master record controls?
Ans: It controls the account assignments that are made to the account. Specifically the field status group controls whether postings to cost centers, internal orders, profitability segments and so on are required, not allowed (suppressed), or optional.
16) What is Country and operational chart of account? Why do you use group chart of account?
Ans: Operational chart of account Day to day activities It is mandatory.
Country COA Its used for legal specific requirement of each country. Its additional and optional.
Group COA used for consolidation of Company codes. This is for group consolidation purpose.
17) What are all the segments in a Customer/Vendor master record?
Ans: Segments in Customer           Segments in Vendor
-      General Data segment            General data segment
-      Company code segment         Company code segment
-      Sales area segment                 Purchasing organization Segment
18) What is open line item management? What do you mean by clearing open line items?
Ans: Open item management is further reconciliation function. OIM allows you to display the open and cleared items and amounts in an account. OIM should be used if an offsetting entry is made for every line item posted in the account. The a/c is reconciled and cleared against another account. Ex. Salary clearing account and GR/IR Clearing account.
19) What is residual payment and part payment?
Ans: Residual payment it clears original invoice with incoming amount and create new line item for remaining outstanding amount.
Partial payment it leaves the original invoice amount and creates new
line item for incoming amount.
20) What is internal and external number ranges?
Ans: Internal Number Ranges: Doc. No will be provided by the system automatically in serial order allotting the next available progressive number. The number must be in numerical.
External Number ranges: Doc. No will be given manually by the end user. System will not lock no automatically in this case. User can pick the number randomly. Number may be an alpha numeric.

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Please give command for table import

Hi experts,
I know this is a very simple qusetion but i am getting confused and work is very sensitive.
i have to import 4 table from one exported (dmp) file.
I am importing it with DBA user , and tables data should go to BDM schema.
please give me command.
OS SunOS 5.9
oracle 9.2.0.7.0
thanks
Message was edited by:
user628282

Please be aware that IGNORE=Y will lead to imported rows being appended to existing tables. If this is what you want, then use ignore. Otherwise you will have to drop the tables before importing.

What is Data conversion ? What are data conversion programs ? please give

What is Data conversion ? What are data conversion programs ? please give me some sample code?

Hi,
I think you mean "Data Acquisition"...
"The Data Acquisition IT process allows you to connect heterogeneous sources (SAP systems, database management systems, files, relational data, multidimensional data) to BI. You can transfer data straight into BI from the source or use SAP NetWeaver XI to transfer data. Furthermore, the process supports direct access to source data, without having to load it into BI."
http://help.sap.com/saphelp_nw04s/helpdata/en/aa/1fb042e745ca6ae10000000a155106/frameset.htm
[Data AcquisitionTechniques in SAP NetWeaver BI|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/329fcd87-0c01-0010-4a9c-86f038e11d23]
Regards
Andreas

I'm a little confused, please help me

There is just sooooo soooo much I am reading through but if the answer to my question is there, I'm missing it.
I have had a subscription for a while, about $3 per month to be able to call people's home phones from my computer on Skype.
I just purchased a subscription to my own phone number now for 1 year so that I have a number and people can call me through Skype on my computer.
Does the phone number subscription cover the outgoing calls too, or do I have to continue paying for the separate subscription for outgoing calls in order to make them?
Basically, do I need the 2 separate subscriptions (the incoming #, the outgoing calls) or am I double-paying?
Thank you SOOOO much if someone can simply clear up my confusion. Sorry if it is addressed somewhere, but I can't seem to find it.

MackenzieWright wrote:
There is just sooooo soooo much I am reading through but if the answer to my question is there, I'm missing it.
I have had a subscription for a while, about $3 per month to be able to call people's home phones from my computer on Skype.
I just purchased a subscription to my own phone number now for 1 year so that I have a number and people can call me through Skype on my computer.
Does the phone number subscription cover the outgoing calls too, or do I have to continue paying for the separate subscription for outgoing calls in order to make them?
Basically, do I need the 2 separate subscriptions (the incoming #, the outgoing calls) or am I double-paying?
Thank you SOOOO much if someone can simply clear up my confusion. Sorry if it is addressed somewhere, but I can't seem to find it.
Yes, you would need to make two purchases. One for the Online Number to receive calls from telephones to your Skype account, and the other for a subscription to make calls to telephones from your Skype account. Other than possibly being able to use the Online Number as your Caller ID when calling telephones from Skype, Online Numbers give you nothing for calling telephones from Skype.
Good luck!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Please give me answers for the following interview questions ?

Dear friends,
Greets............................................
Pls give me solutions for th following questions?
1.How to record BDC using Call Transaction without screen sequence of a particular transaction code?
2.How to initiate the Call Transaction by coding without using Call Transaction Mode 'S' or 'A'.
3.How to run the BDC program without legacy file from Presentation Server. If Application Server how?
4.How BDC overcomes BAPI?
5.Difference between Function Module and BAPI.
6.How to create a BAPI.
7.How to display Footer text in last page of the script.
8.How to display Footer text in last page of the script without touching the layout only using print program.
9. Standard text creation without using SO10 . How to save?
where to save? How to include in the print program?
10.How Script overcomes Smartforms?
11. How to access smartforms thru programs without using SSF_FUNCTION_MODULE_NAME.
12.In smartforms First page should be portriat and second page must be landscape format. Is it possible?
13.How to create internal table globally.
14. How to delete F4 help for a particular field in the selection screen.
15.How to set the password field in the selection screen as it is in the initail screen containing Client, Username,Password.
17. How to use the Hash table algorithm and how access it.
18. Prerequisites for FOR ALL ENTRIES.
19.MENTION the Tcode for performance issue Other than SLIN,SE30,ST05 ?
20. Table Types?
21SAP LUW
22.Types of Lock objects.
Thanks in Advance********************************************
Regards
Raj kumar

For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
some more materials.
Go through the following Documents Links & Materials for ABAP Objects
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
Hi,
Please go through the following :
ABAP Interview Questions
1. How data is stored in cluster table?
Each field of cluster table behaves as tables which contains the no. of entries.
2. What are client dependant objects in abap/sap?
SAP Script layout, text element, and some DDIC objects.
3. On which even we can validate the input fields in module progams?
In PAI (Write field statement on field you want to validate, if you want to validate group of fields put in chain and End chain statement.)
4. In selection screen I have three fields, plant mat no and material group. If I input plant how do I get the mat no and material group based on plant dynamically?
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MATERIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' to get material and material group for the plant.
5. How do you get output from IDOC?
Data in IDOc is stored in segments, the output from Idoc is obtained by reading the data stored in its respective segments.
6. When top of the page event is triggered?
After excuteing first write statement in start-of-selection event.
7. Can we create field without data element and how?
In SE11 one option is available above the fields strip. Data element/ direct type.
8. How do we debug sapscript?
Go to SE71 give lay set name , go to utilities select debugger mode on.
9. Which transaction code can I used to analyze the performance of ABAP program.
TCode AL21.
10. How can I copy a standard table to make my own z_table.
Go to transaction SE11. Then there is one option to copy table. Press that button. Enter the name of the standard table and in the Target table enter Z table name and press enter.
1. What is the use of 'outerjoin'
Ans. With the use of outer join you can join the tables even there is no entry in all the tables used in the view.
In case of inner join there should be an entry in al the tables use in the view.
2. When to use logical database?
Ans. Advantage of Logical databases:
less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
3. What is the use of 'table index'?
Ans .Index is used for faster access of data base tables.
4. What is the use of 'FOR ALL ENTRIES'?
Ans. To avoid nested select statements we use SELECT FOR ALL ENTRIES statement.
If there r more than 10000 records SELECT FOR ALL ENTRIES is used.
Performance wise SELECT FOR ALL ENTRIES is better to use.
5. Can you set up background processing using CALL TRANSACTION?
Yes,Using No Screen Mode.
6. What are table buffers?
Table buffers reside locally on each application server in the system. The data of buffered tables can thus be accessed
directly from the buffer of the application server. This avoids the time-consuming process of accessing the database.
Buffering is useful if table needs to be accessed more no. of times in a program.
ABAP Technical Interview Questions:
1. What is the typical structure of an ABAP program?
2. What are field symbols and field groups.? Have you used "component idx of structure" clause with field groups?
3. What should be the approach for writing a BDC program?
4. What is a batch input session?
5. What is the alternative to batch input session?
6. A situation: An ABAP program creates a batch input session. We need to submit the program and the batch session in background. How to do it?
7. What is the difference between a pool table and a transparent table and how they are stored at the database level?
8. What are the problems in processing batch input sessions? How is batch input process different from processing on line?
9. What do you define in the domain and data element?
10. What are the different types of data dictionary objects?
11. How many types of tables exist and what are they in data dictionary?
12. What is the step-by-step process to create a table in data dictionary?
13. Can a transparent table exist in data dictionary but not in the database physically?
14. What are the domains and data elements?
15. Can you create a table with fields not referring to data elements?
16. What is the advantage of structures? How do you use them in the ABAP programs?
17. What does an extract statement do in the ABAP program?
18. What is a collect statement? How is it different from append?
19. What is open sql vs native sql?
20. What does an EXEC SQL stmt do in ABAP? What is the disadvantage of using it?
21. What is the meaning of ABAP editor integrated with ABAP data dictionary?
22. What are the events in ABAP language?
23. What is an interactive report? What is the obvious diff of such report compared with classical type reports?
24. What is a drill down report?
25. How do you write a function module in SAP? Describe.
26. What are the exceptions in function module?
27. What is a function group?
28. How are the date abd time field values stored in SAP?
29. What are the fields in a BDC_Tab Table?
30. Name a few data dictionary objects?
31. What happens when a table is activated in DD?
32. What is a check table and what is a value table?
33. What are match codes? Describe?
34. What transactions do you use for data analysis?
35. What is table maintenance generator?
36. What are ranges? What are number ranges?
37. What are select options and what is the diff from parameters?
38. How do you validate the selection criteria of a report? And how do you display initial values in a selection screen?
39. What are selection texts?
40. What is CTS and what do you know about it?
41. When a program is created and need to be transported to prodn does selection texts always go with it? if not how do you make sure? Can you change the CTS entries? How do you do it?
42. What is the client concept in SAP? What is the meaning of client independent?
43. Are programs client dependent?
44. Name a few system global variables you can use in ABAP programs?
45. What are internal tables? How do you get the number of lines in an internal table? How to use a specific number occurs statement?
46. How do you take care of performance issues in your ABAP programs?
47. What are datasets?
48. How to find the return code of a stmt in ABAP programs?
49. What are interface/conversion programs in SAP?
50. Have you used SAP supplied programs to load master data?
2. Adapted from response by Maram Roja on Tuesday, June 15, 2004
1. What are the techniques involved in using SAP supplied programs? Do you prefer to write your own programs to load master data? Why?
2. What are logical databases? What are the advantages/disadvantages of logical databases?
3. What specific statements do you using when writing a drill down report?
4. What are different tools to report data in SAP? What all have you used?
5. What are the advantages and disadvantages of ABAP query tool?
6. What are the functional areas? User groups? How does ABAP query work in relation to these?
7. Is a logical database a requirement/must to write an ABAP query?
8. What is the structure of a BDC sessions.
9. What are Change header/detail tables? Have you used them?
10. What do you do when the system crashes in the middle of a BDC batch session?
11. What do you do with errors in BDC batch sessions?
12. How do you set up background jobs in SAP? What are the steps? What are the event driven batch jobs?
13. Is it possible to run host command from SAP environment? How do you run?
14. What kind of financial periods exist in SAP? What is the relevant table for that?
15. Does SAP handle multiple currencies? Multiple languages?
16. What is a currency factoring technique?
17. How do you document ABAP programs? Do you use program documentation menu option?
18. What is SAPscript and layout set?
19. What are the ABAP commands that link to a layout set?
20. What is output determination?
ABAP Interview Questions
1.Without using Tcode SE11, How can we enter the values in to the table???
2.What is the difference between Collect statement and Append Statement???
3.What do you mean by correction and Transportation system???
4.What is the difference between User Exits and BADI????
5.How can we identify User exits in our screen???
6.What do you mean by Inbound and Outbound interface???
7.In realtime do we configure ALE systems or Administator will take care of that??
8.How to release an object???
9.What is the flow of a Sales document???
10.What is the flow of Purchase order???
12.What is the flow of Invoice???
13.What are the standard IDOC's used???
14.What do you mean by table control???Where will we use this???
15.What are field symbols??Where will we use these symbols???
Deepti
1. There are other ways of entering data into a DB table. ex. B D C
2. Collect statement collect/adds the records basing on a key field. allows to create summarised data sets.
Append will append/add a record at the end of existing records
8. to release an object - use se10/se9
9. sales doc flow: S. A. - S. O. - Delivery - Billing
12. Delivery - invoice.
15. field symbols are used for dynamic allocation. at runtime u can assign a concrete field to field-symbol.
Kishore
1. you can go to abap editor (se38) and use insert statement for insertion update for update and modify for modifications.
2. collect will not allow duplicate entries, while append can allow duplicates.
3. if any changes are made to objects they are to be transported to different systems i.e, change and transport.
4. in user exits we go by general method for enhancements while BADIs we use objects (oops concepts)
methods for enhancement.
14. table controls are enhanced version for step loops where we can expand rows .main difference between these two
is step loop can be expanded to two lines table controls can`t.
15. field symbols are just like pointers concept which are used in C language. We use them when we want to refer to
the fields considered,it doesnt allocate any memory for it.
Venu Rapolu
1. Ans: Using BDC., LSMW,,ALE., BAPI
2. Ans: Collect: it adds the numeric fields to the existing non numeric key field records., thereby avoiding duplicate
values., and append will simply adds the record
3 . Ans: The CTS contains work bench organizer and transport system :
The workbench organizer is used to record and contol changes to the ABAP/4 development objects;
The transport system is used to move objects from an SAP dev.system to production system
6. Ans: Outbound interface is used to send IDocs to the ALE server.,
Inbound interface is used to Analyse the received Idoc.
7. Ans: We (ABAPers) don't do.
8. Ans: se09 or se10
13. Ans: MATMAS
CREMAS
DEBMAS
GLMAST etc...
14. Ans: to display records in table format., we use in Screens
15. Ans: we assign the field content at run time with ASSIGN stmt.
Satish D
1. goto se16 u can view the table contents
2. collect will collects all the numeric fields of nonnumeric field values
append will append record at the end of table
3. when we are creatiing new task like dev. a new prg.. after completion of dev. that will be trnsported to testing system or production system to do that we are assigning an
transport request from our dev.class(system) by using se09
4. badis are dev. by class and inheritence methods where as user exitsdev by SAP only and empty shells filled wit user logic
5. go to system then status
6. outbound generating an idoc in ale layer with master_idoc_create_messgetype,
inbound is receivng system with idoc_inbound_process, gives an return variable wether it is sucess or not
7. no we have to configur that
8. go to se09 or se01 there write your task no and use release button it will asks whats the other system name
and number enter them and relase by pressing jeep button
9. inquiry
quotation
sales order
shipping
delivery
invoice
return goods
12. after creation of delivry note invoice is prepared
13. master_idoc_distribute will generate standard idoc
Deepti
I am enclosing some of answers which I know.
1. We can use t.Code SE16 to enter values into table only if table maintainence is allowed for that table.
2. Append will add new entries into the table where as collect add into the numeric type fields if other charatcer fields
matches to your selection criteria.
3. CTS used for creation of ABAP development transport requests.The transaction code for this is SE10.
4. UserExits r used for adding additional functionality to the existing SAP standard transactions.Using UserExits we can add additional functionality standard SAP functionality without making any changes to the original code.BADI is a standardized interface for ABAP sources that enables partners and customers to enhance SAP-delivered programs in their namespace.
5 .We can identify User exits by using transactions CMOD and SMOD.
6. After entering transaction code SE10 select the transport request which u want to transport and click on transport icon(Truck symbol) to release it.
10. Purchase Requistion->RFQ->Vendor Evaluation->Purchase Order(ME21).
14. Table control is the only facility provide thru dialog programming when we come acrosse the use of updating standared,deletion,insertion and all database operations.
15. Field symbols r pointers to the existing data types(like 'C') which does not allocate any memory space. These are used faster access of data.
Answers to some ABAP Interview Questions:
Questions which I have faced in an interview:
1) What is runtime analysis? Have you used this?
2) What is meant by performance analysis? Have done anything to improve the performance?
3) How to transfer the objects? Have to transferred any objects?
4) How did you test the developed objects?
5) What is the difference between SAP Memory and ABAP Memory?
6) In order to upload Purchase order details, how you handle multiple values for a single field?
Eg: Item field may contain no. of values for a record
7) What is the procedure you followed to upload the data?
8) How did you handle errors in Call Transaction?
9) Among the Call Transaction and Session Method, which is faster?
10) What are the difference between Interactive and Drill Down Reports?
11) How to pass the variables to forms?
12) How to create a link between modified form and modified print program?
13) What is the table, which contain the details of all the name of the programs and forms?
14) How did you test the form u developed? How did you taken print?
15) What are Standard Texts?
16) What is the difference between Clustered Tables and Pooled Tables?
17) What is pf-status?
18) Among "Move" and "Move Corresponding", which is efficient one?
19) What are the output type and Tcodes?
20) Where we use Chain and Endchain?
21) Do you use select statement in loop endloop, how will be the performance? To improve the performance?
22) In select-options, how to get the default values as current month first date and last date by default?
Eg: 1/12/2004 and 31/12/2004
Go thru these answers:
1) What is runtime analysis? Have you used this?
It's checks program execution time in microseconds. When you go to se30.if you give desired program name in performance file. It will take you to below screen. You can get how much past is your program.
2) What is meant by performance analysis? Have done
3) How to transfer the objects? Have you transferred any objects?
4) How did you test the developed objects?
I was testing a developed object. There are two types of testing
- Negative testing
- Positive testing
In negative testing we will give negative data in input and we check any errors occurs.
In positive testing we will give positive data in input for checking errors.
8) How did you handle errors in Call Transaction?
We can create a internal table like 'bsgmcgcoll'. All the messages will go to internal table. We can get errors in this internal table.
Below messages are go to internal table. when you run the call transaction.
- Message type
- Message id
- Message Number
- Variable1
- Variable2
- Variable3
9) Among the Call Transaction and Session Method, which is faster?
Call transaction is faster then session method. But usually we use session method in real time...because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct.
10) What are the difference between Interactive and Drill Down Reports?
ABAP/4 provides some interactive events on lists such as AT LINE-SELECTION (double click) or AT USER-COMMAND (pressing a button). You can use these events to move through layers of information about individual items in a list.
Drill down report is nothing but interactive report...drilldown means above paragraph only.
11) How to pass the variables to forms?
12) What is the table, which contain the details of all the name of the programs and forms?
Table cont

I want to start a new iTunes U course for catolog and I don't know what can I do please give me description about this title.

I want to start a new iTunes U course for catolog and I don't know what can I do please give me description about this title.

If you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Please give me idea now I compile all branch data in head office only new r

Hi master
Sir I have 5 office In different city and one head office in Karachi all branch have same oracle system my question is how I get new data and compile for accumulative reporting
I want only new record and modify record not old record
Old record already I import
When I use oracle import and export tool that no give me right result
If xxx table exists in database then import tool not replace and no insert or no replace with previous data with new modify data
Such as
First time
V_no=897 have debit amount 3998 is Islamabad branch and i export form Islamabad and import in Karachi office
Next time
Islamabad office change v_no=897 debit amount with 76555 and add many new record
I export form Islamabad and import in Karachi office but system no change and not add new record in Karachi office
Please give me idea now I compile all branch data in head office only new record and modify record
Thanks
aamir

Here a very simple example with table EMP, assuming source table has a primary key. Firstly you create a materialized view log on source table (necessary for fast refresh) :
SYS@db102 SQL> conn test/test
Connected.
TEST@db102 SQL> create materialized view log on emp including new values;
Materialized view log created.
TEST@db102 SQL> then at destination DB/user :
TEST@db102 SQL> conn scott/tiger@test10
Connected.
SCOTT@test10 SQL> create database link test
2 connect to test identified by test
3 using 'db102';
Database link created.
SCOTT@test10 SQL> create materialized view emp_mv
2 refresh fast
3 as select * from emp@test;
Materialized view created.
SCOTT@test10 SQL>Now emp_mv is the exact copy of emp. To refresh the MV, to reflect changes :
SCOTT@test10 SQL> exec dbms_mview.refresh('EMP_MV','F');
PL/SQL procedure successfully completed.
SCOTT@test10 SQL> ...but I strongly recommend you to read the documentation...

Please give me idea how I highlight the gird row which have

Sir
I have gird with 5 column
Vno
Code
Dept
Date
Amount
Sir my need is which record have above 5000 amount that color read and other color blue
It means above 5000 highlight in grid
Please give me idea how I highlight the gird row which have above 5000 maount
Thank
aamir

PROCEDURE pr_Set_VA (p_VA IN VARCHAR2) IS
v_Feld VARCHAR2 (30);
v_Item VARCHAR2 (61);
v_Block VARCHAR2 (30);
BEGIN
v_Block := :SYSTEM.CURSOR_BLOCK;
v_Feld := Get_Block_Property (v_Block, FIRST_ITEM);
WHILE (v_Feld IS NOT NULL) LOOP
v_Item := v_Block || '.' || v_Feld;
Set_Item_Instance_Property (v_Item, CURRENT_RECORD, VISUAL_ATTRIBUTE, p_VA);
v_Feld := Get_Item_Property (v_Item, NEXTITEM);
END LOOP;
END;

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

Im confused... Please give me a straight ans

Similar Messages

Maybe you are looking for