Im failing to load the bootmgr before windows 7 installation.

Like the title says, I'm failing to load the bootmgr before the windows 7 installation. I get through the process of boot camping and then when it restarts it goes to a black screen and says something like bla bla bla failed to load boot mgr. I've been trying to get this to work for weeeeeeeks its ridiculous, this whole entire process is ridiculously stupid and shouldnt be this hard. Also people keep talking about reformatting something into NTFS or something and I dont know what any of that means -.- sooo yeah im sorry im stupid, but I would appreciate the help. Thank you in advance <3

Do you have a retail Windows DVD inserted into the optical drive?
If you don't know anything about Windows, what NTFS is or how to format a bootable Windows drive, then you should take the computer to an Apple retailer and arrange for a genius to help you out. Virtually, the entire process is outlined in the documentation you printed out, so I question how well you've read it.
You might check out iMac bootmgr is missing.
Boot Camp- Frequently asked questions about installing Windows 7
Apple Support - Boot Camp
Boot Camp - Installation & Setup Guide (OS X Lion)
Boot Camp- Start up to black screen after installing Windows

Similar Messages

"Failed to load the NVIDIA kernel module" [SOLVED]

Hi, I've just done a fresh install of Arch64 and I'm having problems with NVIDIA driver from the repo.
xorg, xf86-input-evdev -- INSTALLED
nvidia, nvidia-utils, lib32-nvidia-utils -- INSTALLED (version 256.44-1)
nouveau -- NOT INSTALLED
here goes the log files:
uname -a
Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
/etc/X11/xorg.conf (generated when I ran "nvidia-xconfig"):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 ([email protected]) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.066]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 142.084] X Protocol Version 11, Revision 0
[ 142.091] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 142.098] Current Operating System: Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64
[ 142.106] Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 142.116] Build Date: 21 June 2010 12:01:49PM
[ 142.125]
[ 142.135] Current version of pixman: 0.18.2
[ 142.145] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.204] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 21:15:02 2010
[ 142.218] (==) Using config file: "/etc/X11/xorg.conf"
[ 142.232] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.246] (==) ServerLayout "Layout0"
[ 142.246] (**) |-->Screen "Screen0" (0)
[ 142.246] (**) | |-->Monitor "Monitor0"
[ 142.246] (**) | |-->Device "Device0"
[ 142.246] (**) |-->Input Device "Keyboard0"
[ 142.246] (**) |-->Input Device "Mouse0"
[ 142.246] (==) Automatically adding devices
[ 142.246] (==) Automatically enabling devices
[ 142.246] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.246] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 142.246] (WW) Disabling Keyboard0
[ 142.246] (WW) Disabling Mouse0
[ 142.246] (II) Loader magic: 0x7ce880
[ 142.246] (II) Module ABI versions:
[ 142.246] X.Org ANSI C Emulation: 0.4
[ 142.246] X.Org Video Driver: 7.0
[ 142.246] X.Org XInput driver : 9.0
[ 142.246] X.Org Server Extension : 3.0
[ 142.252] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 142.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.252] (II) LoadModule: "extmod"
[ 142.252] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.253] (II) Module extmod: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension MIT-SCREEN-SAVER
[ 142.253] (II) Loading extension XFree86-VidModeExtension
[ 142.253] (II) Loading extension XFree86-DGA
[ 142.253] (II) Loading extension DPMS
[ 142.253] (II) Loading extension XVideo
[ 142.253] (II) Loading extension XVideo-MotionCompensation
[ 142.253] (II) Loading extension X-Resource
[ 142.253] (II) LoadModule: "dbe"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.253] (II) Module dbe: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension DOUBLE-BUFFER
[ 142.253] (II) LoadModule: "glx"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 142.269] compiled for 4.0.2, module version = 1.0.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 142.269] (II) Loading extension GLX
[ 142.269] (II) LoadModule: "record"
[ 142.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.269] (II) Module record: vendor="X.Org Foundation"
[ 142.269] compiled for 1.8.1.902, module version = 1.13.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] ABI class: X.Org Server Extension, version 3.0
[ 142.269] (II) Loading extension RECORD
[ 142.269] (II) LoadModule: "dri"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.270] (II) Module dri: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.0.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension XFree86-DRI
[ 142.270] (II) LoadModule: "dri2"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.270] (II) Module dri2: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.2.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension DRI2
[ 142.270] (II) LoadModule: "nvidia"
[ 142.270] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.271] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 142.271] compiled for 4.0.2, module version = 1.0.0
[ 142.271] Module class: X.Org Video Driver
[ 142.288] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 142.303] (EE) NVIDIA: system's kernel log for additional error messages.
[ 142.319] (II) UnloadModule: "nvidia"
[ 142.319] (II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.319] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 142.335] (EE) No drivers available.
[ 142.351]
Fatal server error:
[ 142.384] no screens found
[ 142.400]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 142.469] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 142.488]
find / -name "*nvidia*"
/lib/modules/2.6.34-ARCH/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia/nvidiafb.ko
/etc/OpenCL/vendors/nvidia.icd
/etc/X11/xorg.conf.d/20-nvidia.conf
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-glcore.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/tls/libnvidia-tls.so.256.44
/usr/lib/libnvidia-cfg.so.256.44
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-tls.so.256.44
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-compiler.so.256.44
/usr/share/licenses/nvidia
/usr/share/licenses/lib32-nvidia-utils
/usr/share/licenses/nvidia-utils
/usr/share/applications/nvidia-settings.desktop
/usr/share/man/man1/nvidia-smi.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/doc/nvidia
/usr/share/doc/nvidia-utils
/usr/share/pixmaps/nvidia-settings.png
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-settings
/usr/bin/nvidia-smi
/usr/bin/nvidia-xconfig
/usr/src/linux-2.6.34-ARCH/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia.h
/opt/lib32/usr/lib/libvdpau_nvidia.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so
/opt/lib32/usr/lib/libnvidia-glcore.so.256.44
/opt/lib32/usr/lib/tls/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so.1
/opt/lib32/usr/lib/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libnvidia-compiler.so.256.44
/var/lib/pacman/local/nvidia-256.44-1
/var/lib/pacman/local/nvidia-utils-256.44-1
/var/lib/pacman/local/lib32-nvidia-utils-256.44-1
/var/lib/pacman/sync/extra/nvidia-173xx-utils-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-173xx-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-256.44-1
/var/lib/pacman/sync/extra/nvidia-utils-256.44-1
/var/lib/pacman/sync/community/nvidia-cg-toolkit-2.2-4
/var/lib/pacman/sync/community/lib32-nvidia-utils-256.44-1
/var/cache/pacman/pkg/nvidia-utils-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/nvidia-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/lib32-nvidia-utils-256.44-1-x86_64.pkg.tar.xz
Do you have any idea of what should be done to fix it? I don't want to use NVIDIA driver from their site neither nouveau, I want to use the one from the repo. If you know how to solve it, instead of only pointing the solution, also tell why this is happening, it will help me and other people with the same problem too!
If you need additional information please ask me.
Thanks!!
Last edited by ILoveJapaneseGirls (2010-08-07 03:09:55)

karol, I'll try to add the section you wrote to the xorg.conf, but first I want to show the log of the crash:
/var/log/Xorg.0.log
[ 69.813]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 69.858]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 69.882] X Protocol Version 11, Revision 0
[ 69.890] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 69.899] Current Operating System: Linux desktop 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:31:56 CEST 2010 x86_64
[ 69.910] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 69.921] Build Date: 21 June 2010 12:01:49PM
[ 69.933]
[ 69.944] Current version of pixman: 0.18.2
[ 69.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 22:35:08 2010
[ 70.057] (==) Using config file: "/etc/X11/xorg.conf"
[ 70.072] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 70.117] (==) ServerLayout "Layout0"
[ 70.117] (**) |-->Screen "Screen0" (0)
[ 70.117] (**) | |-->Monitor "Monitor0"
[ 70.117] (**) | |-->Device "Device0"
[ 70.117] (**) |-->Input Device "Keyboard0"
[ 70.117] (**) |-->Input Device "Mouse0"
[ 70.117] (==) Automatically adding devices
[ 70.118] (==) Automatically enabling devices
[ 70.145] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 70.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.168] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 70.168] (WW) Disabling Keyboard0
[ 70.168] (WW) Disabling Mouse0
[ 70.168] (II) Loader magic: 0x7ce880
[ 70.168] (II) Module ABI versions:
[ 70.168] X.Org ANSI C Emulation: 0.4
[ 70.168] X.Org Video Driver: 7.0
[ 70.168] X.Org XInput driver : 9.0
[ 70.168] X.Org Server Extension : 3.0
[ 70.185] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 70.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 70.186] (II) LoadModule: "extmod"
[ 70.200] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 70.211] (II) Module extmod: vendor="X.Org Foundation"
[ 70.211] compiled for 1.8.1.902, module version = 1.0.0
[ 70.211] Module class: X.Org Server Extension
[ 70.211] ABI class: X.Org Server Extension, version 3.0
[ 70.211] (II) Loading extension MIT-SCREEN-SAVER
[ 70.211] (II) Loading extension XFree86-VidModeExtension
[ 70.211] (II) Loading extension XFree86-DGA
[ 70.211] (II) Loading extension DPMS
[ 70.211] (II) Loading extension XVideo
[ 70.211] (II) Loading extension XVideo-MotionCompensation
[ 70.211] (II) Loading extension X-Resource
[ 70.211] (II) LoadModule: "dbe"
[ 70.211] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 70.218] (II) Module dbe: vendor="X.Org Foundation"
[ 70.218] compiled for 1.8.1.902, module version = 1.0.0
[ 70.219] Module class: X.Org Server Extension
[ 70.219] ABI class: X.Org Server Extension, version 3.0
[ 70.219] (II) Loading extension DOUBLE-BUFFER
[ 70.219] (II) LoadModule: "glx"
[ 70.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 71.111] compiled for 4.0.2, module version = 1.0.0
[ 71.111] Module class: X.Org Server Extension
[ 71.111] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 71.111] (II) Loading extension GLX
[ 71.111] (II) LoadModule: "record"
[ 71.111] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 71.125] (II) Module record: vendor="X.Org Foundation"
[ 71.125] compiled for 1.8.1.902, module version = 1.13.0
[ 71.125] Module class: X.Org Server Extension
[ 71.125] ABI class: X.Org Server Extension, version 3.0
[ 71.125] (II) Loading extension RECORD
[ 71.125] (II) LoadModule: "dri"
[ 71.126] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 71.140] (II) Module dri: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.0.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension XFree86-DRI
[ 71.140] (II) LoadModule: "dri2"
[ 71.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 71.140] (II) Module dri2: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.2.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension DRI2
[ 71.140] (II) LoadModule: "nvidia"
[ 71.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 71.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 71.189] compiled for 4.0.2, module version = 1.0.0
[ 71.189] Module class: X.Org Video Driver
[ 71.207] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:24:51 PDT 2010
[ 71.207] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 71.207] (--) using VT number 7
[ 71.260] (II) Primary Device is: PCI 00@00:05:0
[ 71.269] (II) Loading sub module "fb"
[ 71.269] (II) LoadModule: "fb"
[ 71.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.281] (II) Module fb: vendor="X.Org Foundation"
[ 71.281] compiled for 1.8.1.902, module version = 1.0.0
[ 71.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.281] (II) Loading sub module "wfb"
[ 71.281] (II) LoadModule: "wfb"
[ 71.281] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 71.289] (II) Module wfb: vendor="X.Org Foundation"
[ 71.289] compiled for 1.8.1.902, module version = 1.0.0
[ 71.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.289] (II) Loading sub module "ramdac"
[ 71.289] (II) LoadModule: "ramdac"
[ 71.289] (II) Module "ramdac" already built-in
[ 71.309] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 71.309] (==) NVIDIA(0): RGB weight 888
[ 71.309] (==) NVIDIA(0): Default visual is TrueColor
[ 71.309] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.309] (**) NVIDIA(0): Enabling RENDER acceleration
[ 71.309] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 71.309] (II) NVIDIA(0): enabled.
[ 72.040] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 (C51) at PCI:0:5:0 (GPU-0)
[ 72.040] (--) NVIDIA(0): Memory: 262144 kBytes
[ 72.040] (--) NVIDIA(0): VideoBIOS: 05.51.22.33.07
[ 72.040] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 72.040] (--) NVIDIA(0): Connected display device(s) on GeForce 6150 at PCI:0:5:0:
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0)
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): 310.0 MHz maximum pixel clock
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): Internal Dual Link TMDS
[ 72.044] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 72.044] (==) NVIDIA(0):
[ 72.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 72.044] (==) NVIDIA(0): will be used as the requested mode.
[ 72.044] (==) NVIDIA(0):
[ 72.044] (II) NVIDIA(0): Validated modes:
[ 72.044] (II) NVIDIA(0): "nvidia-auto-select"
[ 72.044] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 72.045] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 72.045] (--) NVIDIA(0): option
[ 72.045] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 72.045] (--) Depth 24 pixmap format is 32 bpp
[ 72.052] (II) NVIDIA(0): Initialized GPU GART.
[ 72.055] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72.055] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72.055] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72.055] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72.055] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72.055] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72.055] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72.055] (II) NVIDIA(0): Config Options in the README.
[ 72.056] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 72.178] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 72.178] (EE) NVIDIA(0): *** Aborting ***
[ 72.178]
Fatal server error:
[ 72.178] AddScreen/ScreenInit failed for driver 0
[ 72.178]
[ 72.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.178] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 72.178]
As it's mentioned, it may be a problem of ACPI.
About the lib32-nvidia-utils, I just installed because it's written in the wiki http://wiki.archlinux.org/index.php/NVIDIA#Installing: "Note: On 64 bit systems, For 32-bit programs to take advantage of nvidia-utils you must also install the equivalent lib32 package (for example lib32-nvidia-utils)."

TS1702 I am having trouble opening the Times and Sunday Times Newspaper App in my iPad Newstand. Each time I seek to load I get the message "Failed to load the Kiosk".

I have been told by the T8imes helpline that this is an Apple problem with its Newsstand. I have tried deleting the App and reloading it. Still the same message "Failed to load the Kiosk" appears. I have tried a hard reset of the iPad, again without success. Can you suggest anything else?

You bought an app but it did not work properly on your device. You can easily report problems with your iTunes Store purchases via the iTunes Store. Here is how:
Launch iTunes > Choose Store > Sign in.
Store > View My Account > Purchase History then Click the Report a Problem button.
Fill out the form explaining the problem you are having.
Submit the problem report and wait for a response from Apple, they usually respond within 24 hours.
Notes:
When Apple emails your invoice, there will be a link on the invoice. You may also click the “Report Problem” link next to the app that you are having issues with to report your problems.
Problems with in-app purchases or free apps, report them here:http://www.apple.com/support/itunes/ww/
Before reporting your issue, make sure that you followed these troubleshooting steps explained here.
<Link Edited by Host>

Forms 11g Server compilation issues: FRM-18108: Failed to load the following objects

Attempting to upgrade to 11g (Forms 11 Version 11.1.2.1.0 on Linux) from 9i.
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
Compiling an FMB on the server (not windows PC) is giving error FRM-18108: Failed to load the following objects. The compiler is unable to find OLB files and PLL files. This seems to be a config issue but I cannot track it down.
We have a /nhbcapps/lib for library and object library (pll, olb) files and we have a /nhbcapps/bin for executables (mmx, fmx, plx)
We have our own envmt file, cdb.env (in same folder as default.env):
FORMS_PATH=/nhbcapps/bin:/nhbcapps/lib:/app/oracle/Middleware/Oracle_FRHome2/forms:/app/oracle/Middleware/asinst_1/FormsComponent/forms
PATH=/nhbcapps/bin:/nhbcapps/lib:/app/oracle/Middleware/Oracle_FRHome2/bin:/app/oracle/Middleware/Oracle_FRHome2/jdk/bin
formsweb.cfg:
envFile=cdb.env
Please could anyone help get this working?

Your module NC_REF.fmb (or NC_REF.olb), which is referenced for shared objects, cannot be found. The best way to test it is to place it in the working directory (the start-in directory of the windows shortcut from where you launch Forms Builder). That way you are independent from the FORMS60_PATH, because the working directory is searched first.

Getting message failed to load the following objects when opening any fmb

hi all,
when ever i try to open any fmb to do some work i am getting the message unable to load the following objects and it gives the name like template.fmb.................
on pressing ok i get another message unable to attach the following libraries and it gives the names of all the library.
upon checking the forms60_path i find all these libraries are present in the source folder which is referred in forms60_path.
i am stuck now as i dont knowe how to move further. please consider it as urgent and suggest me the solution.
will be thankful.

following are the messages:
FRM-18108: Failed to load the following objects.
Source Module:TEMPLATE.FMB
Source Object: CHANGE_HISTORY
Source Module:TEMPLATE.FMB
Source Object: KEY-F0
Source Module:TEMPLATE.FMB
Source Object: FORM_PRINT
Source Module:TEMPLATE.FMB
Source Object: FORM_EXIT
Source Module:TEMPLATE.FMB
Source Object: FORM_ERREXIT
Source Module:TEMPLATE.FMB
Source Object: FORM_NAVIGATE
Source Module:TEMPLATE.FMB
Source Object: FORM_SUMMARY
Source Module:TEMPLATE.FMB
Source Object: WHEN-NEW-FORM-INSTANCE
Source Module:TEMPLATE.FMB
Source Object: WHEN-NEW-ITEM-INSTANCE
Source Module:TEMPLATE.FMB
Source Object: KEY-EXIT
Source Module:TEMPLATE.FMB
Source Object: KEY-HELP
Source Module:TEMPLATE.FMB
Source Object: WHEN-TIMER-EXPIRED
Source Module:TEMPLATE.FMB
Source Object: TRIG_SET_ROWID
Source Module:TEMPLATE.FMB
Source Object: KEY-EXEQRY
Source Module:TEMPLATE.FMB
Source Object: PRE-FORM
Source Module:TEMPLATE.FMB
Source Object: PRE-QUERY
Source Module:TEMPLATE.FMB
Source Object: WHEN-WINDOW-ACTIVATED
Source Module:TEMPLATE.FMB
Source Object: KEY-ENTQRY
Source Module:TEMPLATE.FMB
Source Object: ER_ABORT_ALERT_CANCEL
Source Module:TEMPLATE.FMB
Source Object: ER_WARN_ALERT_YESNO
Source Module:TEMPLATE.FMB
Source Object: ER_NOTE_ALERT_OK
Source Module:TEMPLATE.FMB
Source Object: ER_CAUTION_ALERT_OKCANCEL
Source Module:TEMPLATE.FMB
Source Object: BLK_TOOLBAR
Source Module:TEMPLATE.FMB
Source Object: EMPTY_VERT_CVS
Source Module:TEMPLATE.FMB
Source Object: EMPTY_HORI_CVS
Source Module:TEMPLATE.FMB
Source Object: TMPLCVS
Source Module:TEMPLATE.FMB
Source Object: CVS_MAINT_DETAIL
Source Module:TEMPLATE.FMB
Source Object: VERT_CVS
Source Module:TEMPLATE.FMB
Source Object: HORI_CVS
Source Module:TEMPLATE.FMB
Source Object: WINDOW_REFRESH_OBJECTS
Source Module:TEMPLATE.FMB
Source Object: ER_OBJECTS
Source Module:TEMPLATE.FMB
Source Object: TOOLBARS
Source Module:TEMPLATE.FMB
Source Object: LIST
Source Module:TEMPLATE.FMB
Source Object: OTHERS
Source Module:TEMPLATE.FMB
Source Object: LABEL
Source Module:TEMPLATE.FMB
Source Object: BUTTONS
Source Module:TEMPLATE.FMB
Source Object: TEXTITEMS
Source Module:TEMPLATE.FMB
Source Object: OG_PROPERTY_CLASSES
Source Module:TEMPLATE.FMB
Source Object: OG_LOV
Source Module:TEMPLATE.FMB
Source Object: TOOLBAR_BUTTONS
Source Module:TEMPLATE.FMB
Source Object: LIQUIDTVA
Source Module:TEMPLATE.FMB
Source Object: CURRENTRECVA
Source Module:TEMPLATE.FMB
Source Object: CLOSREVVA
Source Module:TEMPLATE.FMB
Source Object: BORROWVA
Source Module:TEMPLATE.FMB
Source Object: UNAUTHRECVA
Source Module:TEMPLATE.FMB
Source Object: VA_DISABLED_TAB
Source Module:TEMPLATE.FMB
Source Object: VA_ENABLED_TAB
Source Module:TEMPLATE.FMB
Source Object: MAXWIN
Source Module:TEMPLATE.FMB
Source Object: WINDOW0
Source Module:TEMPLATE.FMB
Source Object: WIN_QUERY
Source Module:TEMPLATE.FMB
Source Object: SMMDI_WIN2
FRM-10102: Cannot attach PL/SQL library Svpkcs. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library cspkoscs. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library HLPKCS. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library D2kwutil. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library cleintpr. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library hint. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library smcs_hnt. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library Og. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library smpkcs. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library ovpkcs. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library environment. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library MBNT. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library rppkcs. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library mspkcs. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library hasp. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library stpkcs. This library attachment will be lost if the module is saved.
**********

FRM-18108: Failed to load the following objects

FRM-18108: Failed to load the following objects
I get the following error when I open a form that references an object library. The repercussions of this is that the window settings are affected in the main form and several other calling forms.
FRM-18108: Failed to load the following objects
What do I need to do to resolve this? I need to fix this in NT and then upload the forms to Solaris to be compiled and then deployed over the web.
I need solutions for NT and what I need to do on Solaris.
Thanks

Hi
at least for NT, you must place IN ALL the FORMS60_PATH (regedit of yourNT) of your regedit,the directories where you have the libraries, menus, etc, and of course your forms.
I suggest you: place your own directories in the first place of the forms60_path's item. then, repeat the attaching and compiling.
I hope it helps U
bye

Sometimes fails to load the right codec (or chipset) for audio

Sometimes fails to load the right sound codec (or chipset) for at boot, I think that it's same issue with alsa and OSS.
At boot time (toshiba u300) alsa (or kernel maybe) fails to load sound.
When it works this is loaded:
kike ~ $ log -b | grep "snd_"
jul 02 22:46:10 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
kike ~ $ amixer info
Card default 'Intel'/'HDA Intel at 0xf0800000 irq 48'
Mixer name : 'Realtek ALC268'
Components : 'HDA:10ec0268,10ec0268,00100003 HDA:11c11040,11790001,00100200'
Controls : 34
Simple ctrls : 14
kike ~ $ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0800000 irq 45
kike ~ $ cat /proc/asound/card0/codec#* | grep Codec
Codec: Realtek ALC268
Codec: LSI ID 1040
kike ~ $ modinfo soundcore
filename: /lib/modules/3.9.7-1-ARCH/kernel/sound/soundcore.ko.gz
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
depends:
intree: Y
vermagic: 3.9.7-1-ARCH SMP preempt mod_unload modversions 686
parm: preclaim_oss:int
kike ~ $ alsactl init
Found hardware: "HDA-Intel" "Realtek ALC268" "HDA:10ec0268,1179ff50,00100003 HDA:11c11040,11790001,00100200" "0x1179" "0xff50"
Hardware is initialized using a generic method
kike ~ $ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
kike ~ $ lsmod | grep snd
snd_hda_codec_realtek 26353 1
snd_hda_intel 30415 0
snd_hda_codec 125545 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 62851 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 6038 2 snd_pcm,snd_hda_intel
snd_timer 14846 1 snd_pcm
snd 44486 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
kike ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
kike ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 jul 8 14:45 by-path
crw-rw----+ 1 root audio 116, 6 jul 8 14:45 controlC0
crw-rw----+ 1 root audio 116, 5 jul 8 14:45 hwC0D0
crw-rw----+ 1 root audio 116, 4 jul 8 14:45 hwC0D1
crw-rw----+ 1 root audio 116, 3 jul 8 14:45 pcmC0D0c
crw-rw----+ 1 root audio 116, 2 jul 8 14:45 pcmC0D0p
crw-rw---- 1 root audio 116, 1 jul 8 14:45 seq
crw-rw----+ 1 root audio 116, 33 jul 8 14:45 timer
kike ~ $ speaker-test -Dplug:front -c2
speaker-test 1.0.27.1
Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 1048576
Period size range from 32 to 524288
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
0 - Front Left
1 - Front Right
Time per period = 10,949396
0 - Front Left
1 - Front Right
Time per period = 10,959696
When sound doesn't works, only the codec «LSI ID 1040» is loaded, nor «Realtek ALC268» nor both:
kike ~ $ log -b | grep "snd_"
nov 21 07:47:20 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
kike ~ $ amixer info
Card default 'Intel'/'HDA Intel at 0xf0800000 irq 45'
Mixer name : 'LSI ID 1040'
Components : 'HDA:11c11040,11790001,00100200'
Controls : 0
Simple ctrls : 0
kike ~ $ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0800000 irq 45
kike ~ $ cat /proc/asound/card0/codec#* | grep Codec
Codec: LSI ID 1040
kike ~ $ modinfo soundcore
filename: /lib/modules/3.11.6-1-ARCH/kernel/sound/soundcore.ko.gz
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
depends:
intree: Y
vermagic: 3.11.6-1-ARCH SMP preempt mod_unload modversions 686
parm: preclaim_oss:int
kike ~ $ alsactl init
Found hardware: "HDA-Intel" "LSI ID 1040" "HDA:11c11040,11790001,00100200" "0x1179" "0xff50"
Hardware is initialized using a generic method
kike ~ $ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
kike ~ $ lsmod | grep snd
snd_hda_intel 30903 0
snd_hda_codec 127562 1 snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 63876 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5942 2 snd_pcm,snd_hda_intel
snd_timer 14942 1 snd_pcm
snd 44566 5 snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
kike ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
kike ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 nov 21 07:47 by-path
crw-rw----+ 1 root audio 116, 3 nov 21 07:47 controlC0
crw-rw----+ 1 root audio 116, 2 nov 21 07:47 hwC0D1
crw-rw---- 1 root audio 116, 1 nov 21 07:47 seq
crw-rw----+ 1 root audio 116, 33 nov 21 07:47 timer
kike ~ $ speaker-test
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Playback open error: -2,No existe el fichero o el directorio
kike ~ $
I've followed this topics without luck.
https://wiki.archlinux.org/index.php/Al … sound_card
https://mailman.archlinux.org/pipermail … 05092.html
https://www.kernel.org/doc/Documentatio … Models.txt
First I worked around alsa sound state, it doesn't work, then I tried to point my laptop model in «/etc/modprobe.d/alsa-base.conf» file:
options snd-hda-intel model=toshiba
options snd-hda-intel index=0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
options snd-pcsp index=-2
options snd-usb-audio index=-2
And last I've tried to load Realtek modules in «/etc/modules-load.d/alsa.conf» file:
snd
snd_hda_intel
snd_hda_codec
snd_pcm
snd_page_alloc
snd_timer
snd_hwdep
snd_hda_codec_realtek
And here is that commands shows this sesion:
kike ~ $ log -b | grep "snd_"
dic 22 08:23:20 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
dic 22 08:23:21 dokan-laptop systemd-modules-load[146]: Inserted module 'snd_hda_intel'
dic 22 08:23:21 dokan-laptop systemd-modules-load[146]: Inserted module 'snd_hda_codec_realtek'
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:34 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:02 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:02 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kike ~ $ amixer info
Card default 'Intel'/'HDA Intel at 0xf0800000 irq 45'
Mixer name : 'LSI ID 1040'
Components : 'HDA:11c11040,11790001,00100200'
Controls : 0
Simple ctrls : 0
kike ~ $ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0800000 irq 45
kike ~ $ cat /proc/asound/card0/codec#* | grep Codec
Codec: LSI ID 1040
kike ~ $ modinfo soundcore
filename: /lib/modules/3.12.5-1-ARCH/kernel/sound/soundcore.ko.gz
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
depends:
intree: Y
vermagic: 3.12.5-1-ARCH SMP preempt mod_unload modversions 686
parm: preclaim_oss:int
kike ~ $ alsactl init
Found hardware: "HDA-Intel" "LSI ID 1040" "HDA:11c11040,11790001,00100200" "0x1179" "0xff50"
Hardware is initialized using a generic method
kike ~ $ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
kike ~ $ lsmod | grep snd
snd_hda_codec_realtek 35534 0
snd_hda_intel 31255 0
snd_hda_codec 128858 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4750 1 snd_hda_codec
snd_pcm 63880 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5978 2 snd_pcm,snd_hda_intel
snd_timer 14946 1 snd_pcm
snd 44566 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
kike ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
kike ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 dic 22 08:23 by-path
crw-rw----+ 1 root audio 116, 3 dic 22 08:23 controlC0
crw-rw----+ 1 root audio 116, 2 dic 22 08:23 hwC0D1
crw-rw---- 1 root audio 116, 1 dic 22 08:23 seq
crw-rw----+ 1 root audio 116, 33 dic 22 08:23 timer
kike ~ $ speaker-test -Dplug:front -c2
speaker-test 1.0.27.2
Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Playback open error: -2,No existe el fichero o el directorio
My next step is go into kernel but I think it's better to ask here first.
I have to say that before Arch it had installed Ubuntu 10.04 with OSS (problems with keyboard sound keys with alsa), lately before change to Arch I must to restart sound system before it works frequently with this procedure; «soundoff», then «soundon» absolutly freezes the laptop so I had to turn off it and turn on again, then «rm /usr/lib/oss/starting», and last «soundon», then it sometimes works.
Now my only way to have sound is to restart the system time and time again until it works.
Thanks for your advices.
Last edited by Dokan (2013-12-22 11:49:08)

Maybe two kernel modules that try to control the same piece of hardware, but how can I know what modules are?
Blacklisting [https://wiki.archlinux.org/index.php/Ke … acklisting]
Blacklisting, in the context of kernel modules, is a mechanism to prevent the kernel module from loading. This could be useful if, for example, the associated hardware is not needed, or if loading that module causes problems: for instance there may be two kernel modules that try to control the same piece of hardware, and loading them together would result in a conflict.
Some modules are loaded as part of the initramfs. mkinitcpio -M will print out all autodetected modules: to prevent the initramfs from loading some of those modules, blacklist them in /etc/modprobe.d/modprobe.conf. Running mkinitcpio -v will list all modules pulled in by the various hooks (e.g. filesystem hook, SCSI hook, etc.). Remember to add that .conf file to the FILES section in /etc/mkinitcpio.conf (if you have not done so already) and rebuild the initramfs once you have blacklisted the modules, and to reboot afterwards.
# mkinitcpio -M
==> Modules autodetected
ac
acpi_cpufreq
ahci
ata_generic
ata_piix
battery
btusb
button
coretemp
ehci_pci
evdev
ext4
firewire_ohci
hid_generic
i2c_i801
i915
intel_agp
iTCO_wdt
iwl4965
joydev
kvm_intel
lpc_ich
microcode
pata_acpi
pcspkr
processor
psmouse
r592
r8169
sdhci_pci
sd_mod
serio_raw
shpchp
snd_hda_intel
sr_mod
thermal
toshiba_acpi
toshiba_bluetooth
uhci_hcd
usbcore
usbhid
uvcvideo
video
wmi
[root@dokan-laptop ~]# mkinitcpio -v
==> Starting dry run: 3.12.5-1-ARCH
-> Running build hook: [/usr/lib/initcpio/install/base]
adding file: /bin/busybox
adding symlink: /usr/lib/libc.so.6 -> libc-2.18.so
adding file: /usr/lib/libc-2.18.so
adding symlink: /lib/ld-linux.so.2 -> ld-2.18.so
adding file: /usr/lib/ld-2.18.so
adding symlink: /usr/bin/[ -> busybox
adding symlink: /usr/bin/[[ -> busybox
adding symlink: /usr/bin/ash -> busybox
adding symlink: /usr/bin/awk -> busybox
adding symlink: /usr/bin/basename -> busybox
adding symlink: /usr/bin/cat -> busybox
adding symlink: /usr/bin/chgrp -> busybox
adding symlink: /usr/bin/chmod -> busybox
adding symlink: /usr/bin/chown -> busybox
adding symlink: /usr/bin/chroot -> busybox
adding symlink: /usr/bin/clear -> busybox
adding symlink: /usr/bin/cp -> busybox
adding symlink: /usr/bin/cttyhack -> busybox
adding symlink: /usr/bin/cut -> busybox
adding symlink: /usr/bin/dd -> busybox
adding symlink: /usr/bin/df -> busybox
adding symlink: /usr/bin/dirname -> busybox
adding symlink: /usr/bin/dmesg -> busybox
adding symlink: /usr/bin/du -> busybox
adding symlink: /usr/bin/echo -> busybox
adding symlink: /usr/bin/egrep -> busybox
adding symlink: /usr/bin/env -> busybox
adding symlink: /usr/bin/expr -> busybox
adding symlink: /usr/bin/false -> busybox
adding symlink: /usr/bin/free -> busybox
adding symlink: /usr/bin/getopt -> busybox
adding symlink: /usr/bin/grep -> busybox
adding symlink: /usr/bin/halt -> busybox
adding symlink: /usr/bin/head -> busybox
adding symlink: /usr/bin/hexdump -> busybox
adding symlink: /usr/bin/ifconfig -> busybox
adding symlink: /usr/bin/init -> busybox
adding symlink: /usr/bin/install -> busybox
adding symlink: /usr/bin/ip -> busybox
adding symlink: /usr/bin/ipaddr -> busybox
adding symlink: /usr/bin/iplink -> busybox
adding symlink: /usr/bin/iproute -> busybox
adding symlink: /usr/bin/iprule -> busybox
adding symlink: /usr/bin/iptunnel -> busybox
adding symlink: /usr/bin/kbd_mode -> busybox
adding symlink: /usr/bin/kill -> busybox
adding symlink: /usr/bin/killall -> busybox
adding symlink: /usr/bin/less -> busybox
adding symlink: /usr/bin/ln -> busybox
adding symlink: /usr/bin/loadfont -> busybox
adding symlink: /usr/bin/loadkmap -> busybox
adding symlink: /usr/bin/losetup -> busybox
adding symlink: /usr/bin/ls -> busybox
adding symlink: /usr/bin/md5sum -> busybox
adding symlink: /usr/bin/mkdir -> busybox
adding symlink: /usr/bin/mkfifo -> busybox
adding symlink: /usr/bin/mknod -> busybox
adding symlink: /usr/bin/mktemp -> busybox
adding symlink: /usr/bin/mountpoint -> busybox
adding symlink: /usr/bin/mv -> busybox
adding symlink: /usr/bin/nc -> busybox
adding symlink: /usr/bin/netstat -> busybox
adding symlink: /usr/bin/nslookup -> busybox
adding symlink: /usr/bin/openvt -> busybox
adding symlink: /usr/bin/pgrep -> busybox
adding symlink: /usr/bin/pidof -> busybox
adding symlink: /usr/bin/ping -> busybox
adding symlink: /usr/bin/ping6 -> busybox
adding symlink: /usr/bin/poweroff -> busybox
adding symlink: /usr/bin/printf -> busybox
adding symlink: /usr/bin/ps -> busybox
adding symlink: /usr/bin/pwd -> busybox
adding symlink: /usr/bin/readlink -> busybox
adding symlink: /usr/bin/reboot -> busybox
adding symlink: /usr/bin/rm -> busybox
adding symlink: /usr/bin/rmdir -> busybox
adding symlink: /usr/bin/route -> busybox
adding symlink: /usr/bin/sed -> busybox
adding symlink: /usr/bin/seq -> busybox
adding symlink: /usr/bin/setfont -> busybox
adding symlink: /usr/bin/sh -> busybox
adding symlink: /usr/bin/sha1sum -> busybox
adding symlink: /usr/bin/sha256sum -> busybox
adding symlink: /usr/bin/sha512sum -> busybox
adding symlink: /usr/bin/sleep -> busybox
adding symlink: /usr/bin/sort -> busybox
adding symlink: /usr/bin/stat -> busybox
adding symlink: /usr/bin/strings -> busybox
adding symlink: /usr/bin/sync -> busybox
adding symlink: /usr/bin/tac -> busybox
adding symlink: /usr/bin/tail -> busybox
adding symlink: /usr/bin/telnet -> busybox
adding symlink: /usr/bin/test -> busybox
adding symlink: /usr/bin/tftp -> busybox
adding symlink: /usr/bin/touch -> busybox
adding symlink: /usr/bin/true -> busybox
adding symlink: /usr/bin/umount -> busybox
adding symlink: /usr/bin/uname -> busybox
adding symlink: /usr/bin/uniq -> busybox
adding symlink: /usr/bin/uptime -> busybox
adding symlink: /usr/bin/vi -> busybox
adding symlink: /usr/bin/wc -> busybox
adding symlink: /usr/bin/wget -> busybox
adding symlink: /usr/bin/yes -> busybox
adding file: /usr/sbin/kmod
adding symlink: /usr/lib/libz.so.1 -> libz.so.1.2.8
adding file: /usr/lib/libz.so.1.2.8
adding symlink: /usr/bin/depmod -> kmod
adding symlink: /usr/bin/insmod -> kmod
adding symlink: /usr/bin/rmmod -> kmod
adding symlink: /usr/bin/lsmod -> kmod
adding symlink: /usr/bin/modprobe -> kmod
adding symlink: /usr/bin/modinfo -> kmod
adding file: /usr/sbin/blkid
adding symlink: /usr/lib/libblkid.so.1 -> libblkid.so.1.1.0
adding file: /usr/lib/libblkid.so.1.1.0
adding symlink: /usr/lib/libuuid.so.1 -> libuuid.so.1.3.0
adding file: /usr/lib/libuuid.so.1.3.0
adding file: /usr/sbin/mount
adding symlink: /usr/lib/libmount.so.1 -> libmount.so.1.1.0
adding file: /usr/lib/libmount.so.1.1.0
adding file: /usr/sbin/switch_root
adding file: /init_functions
adding file: /init
adding file: /usr/lib/modprobe.d/usb-load-ehci-first.conf
-> Running build hook: [/usr/lib/initcpio/install/udev]
adding file: /etc/udev/udev.conf
adding file: /usr/lib/systemd/systemd-udevd
adding symlink: /usr/lib/librt.so.1 -> librt-2.18.so
adding file: /usr/lib/librt-2.18.so
adding symlink: /usr/lib/libkmod.so.2 -> libkmod.so.2.2.5
adding file: /usr/lib/libkmod.so.2.2.5
adding symlink: /usr/lib/libacl.so.1 -> libacl.so.1.1.0
adding file: /usr/lib/libacl.so.1.1.0
adding symlink: /usr/lib/libpthread.so.0 -> libpthread-2.18.so
adding file: /usr/lib/libpthread-2.18.so
adding symlink: /usr/lib/libattr.so.1 -> libattr.so.1.1.0
adding file: /usr/lib/libattr.so.1.1.0
adding file: /usr/bin/udevadm
adding file: /usr/bin/systemd-tmpfiles
adding symlink: /usr/lib/libcap.so.2 -> libcap.so.2.22
adding file: /usr/lib/libcap.so.2.22
adding file: /usr/lib/udev/rules.d/50-udev-default.rules
adding file: /usr/lib/udev/rules.d/60-persistent-storage.rules
adding file: /usr/lib/udev/rules.d/64-btrfs.rules
adding file: /usr/lib/udev/rules.d/80-drivers.rules
adding file: /usr/lib/udev/ata_id
adding file: /usr/lib/udev/scsi_id
adding file: /hooks/udev
-> Running build hook: [/usr/lib/initcpio/install/autodetect]
caching 44 modules
-> Running build hook: [/usr/lib/initcpio/install/modconf]
adding dir: /etc/modprobe.d
adding file: /etc/modprobe.d/alsa-base.conf
overwriting file: /usr/lib/modprobe.d/usb-load-ehci-first.conf
-> Running build hook: [/usr/lib/initcpio/install/block]
adding module: scsi_mod
adding module: sd_mod
adding module: cdrom
adding module: sr_mod
adding module: libata
adding module: pata_acpi
adding module: ata_generic
adding module: libahci
adding module: ahci
adding module: ata_piix
adding module: usb-common
adding module: usbcore
adding module: ehci-hcd
adding module: ehci_pci
adding module: uhci_hcd
adding module: crc-itu-t
adding module: firewire-core
adding module: firewire_ohci
adding module: mmc_core
adding module: sdhci
adding module: sdhci_pci
adding module: firewire-sbp2
adding module: usb_storage
adding module: mmc_block
-> Running build hook: [/usr/lib/initcpio/install/lvm2]
adding module: dm-mod
adding module: dm-snapshot
adding module: dm-log
adding module: dm-region-hash
adding module: dm-mirror
adding file: /usr/bin/lvm
adding symlink: /usr/lib/libudev.so.1 -> libudev.so.1.4.0
adding file: /usr/lib/libudev.so.1.4.0
adding symlink: /usr/lib/libdl.so.2 -> libdl-2.18.so
adding file: /usr/lib/libdl-2.18.so
adding file: /usr/lib/libdevmapper-event.so.1.02
adding file: /usr/lib/libdevmapper.so.1.02
adding symlink: /usr/lib/libreadline.so.6 -> libreadline.so.6.2
adding file: /usr/lib/libreadline.so.6.2
adding symlink: /usr/lib/libncursesw.so.5 -> libncursesw.so.5.9
adding file: /usr/lib/libncursesw.so.5.9
adding file: /usr/bin/lvmetad
adding file: /usr/bin/dmsetup
adding file: /usr/lib/udev/rules.d/10-dm.rules
adding file: /usr/lib/udev/rules.d/13-dm-disk.rules
adding file: /usr/lib/udev/rules.d/95-dm-notify.rules
adding file: /usr/lib/udev/rules.d/11-dm-lvm.rules
adding file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
adding file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
adding file: /etc/lvm/lvm.conf
adding file: /hooks/lvm2
-> Running build hook: [/usr/lib/initcpio/install/filesystems]
adding module: mbcache
adding module: jbd2
adding module: crc16
adding module: ext4
-> Running build hook: [/usr/lib/initcpio/install/keyboard]
adding module: hid
adding module: hid_generic
adding module: usbhid
-> Running build hook: [/usr/lib/initcpio/install/fsck]
adding file: /usr/sbin/fsck.ext4
adding symlink: /usr/lib/libext2fs.so.2 -> libext2fs.so.2.4
adding file: /usr/lib/libext2fs.so.2.4
adding symlink: /usr/lib/libcom_err.so.2 -> libcom_err.so.2.1
adding file: /usr/lib/libcom_err.so.2.1
adding symlink: /usr/lib/libe2p.so.2 -> libe2p.so.2.3
adding file: /usr/lib/libe2p.so.2.3
adding symlink: /usr/bin/fsck.ext2 -> fsck.ext4
adding symlink: /usr/bin/fsck.ext3 -> fsck.ext4
adding file: /usr/sbin/fsck
==> Generating module dependencies
==> Dry run complete, use -g IMAGE to generate a real image
[root@dokan-laptop ~]# nano /etc/modprobe.d/alsa-base.conf
options snd-hda-intel model=toshiba
options snd-hda-intel index=0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
options snd-pcsp index=-2
options snd-usb-audio index=-2

Urgent: FRM - 18108: Failed to load the following objects.... in R12

Hi,
I am unable to open forms,
even it opens with this following error, as well all form fields are not coming.
anyone give information.
Please see this following error message:
FRM - 18108: Failed to load the following objects.
Source Module: APPSTAND
Source Object: STANDARD_PC_AND_VA
Source Module: APPSTAND
Source Object: STANDARD_TOOLBAR
Source Module: APPSTAND
Source Object: STANDARD_CALENDAR
Cheers from..
M.K.Thamaraiselvan

Hi,
i used to get this following error also, while connecting from windows desktop
FRM - 18108: Failed to load the following objects.
Source Module: APPSTAND
Source Object: STANDARD_PC_AND_VA
Source Module: APPSTAND
Source Object: STANDARD_TOOLBAR
Source Module: APPSTAND
Source Object: STANDARD_CALENDAR
FRM-10102: Cannot attach PL/SQL library APPCORE.pll. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library GLOBE. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library JE. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library FNDSQF. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library JA. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library JL. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library VERT. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library CUSTOM. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library APPDAYPK.pll. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library GHR. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library PQH_GEN. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library PSAC. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library IGILUTIL. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library GMS. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library APPCORE2. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library FV. This library attachment will be lost if the module is saved.
FRM-10102: Cannot attach PL/SQL library OPM. This library attachment will be lost if the module is saved.

Reg FRM-18108: Failed to load the following objects Error

Hi All,
I am getting the following error when i open a form.
FRM-18108: Failed to load the following objects.
Source Module:Referenc.olb
Source Object: POST-RECORD
Source Module:Referenc.olb
Source Object: KEY-CLRFRM
Source Module:Referenc.olb
Source Object: KEY-DOWN
Source Module:Referenc.olb
Source Object: KEY-DUP-ITEM
Source Module:Referenc.olb
Source Object: KEY-DUPREC
Source Module:Referenc.olb
Source Object: KEY-ENTQRY
Source Module:Referenc.olb
Source Object: KEY-EXEQRY
Source Module:Referenc.olb
Source Object: KEY-EXIT
Source Module:Referenc.olb
Source Object: KEY-HELP
Source Module:Referenc.olb
Source Object: KEY-MENU
Source Module:Referenc.olb
Source Object: KEY-UP
Source Module:Referenc.olb
Source Object: PRE-BLOCK
Source Module:Referenc.olb
Source Object: WHEN-NEW-FORM-INSTANCE
Source Module:Referenc.olb
Source Object: WHEN-NEW-ITEM-INSTANCE
Source Module:Referenc.olb
Source Object: WHEN-WINDOW-CLOSED
Source Module:Referenc.olb
Source Object: AL_ERROR
Source Module:Referenc.olb
Source Object: AL_INFORMATION
Source Module:Referenc.olb
Source Object: AL_WARNING
Source Module:Referenc.olb
Source Object: ABOUT
Source Module:Referenc.olb
Source Object: TOOLBAR
Source Module:Referenc.olb
Source Object: ABOUT
Source Module:Referenc.olb
Source Object: TOOLBAR
Source Module:Referenc.olb
Source Object: PM_STANDARD
Source Module:Referenc.olb
Source Object: PC_DISPLAY_ITEM
Source Module:Referenc.olb
Source Object: PC_FRAME
Source Module:Referenc.olb
Source Object: PC_ICON_BUTTON
Source Module:Referenc.olb
Source Object: PC_LIST_OF_VALUES
Source Module:Referenc.olb
Source Object: PC_OK_BUTTON
Source Module:Referenc.olb
Source Object: PC_TEXT_ITEM
Source Module:Referenc.olb
Source Object: VA_CURRENT_RECORD
Source Module:Referenc.olb
Source Object: VA_SCROLLBAR
Source Module:Referenc.olb
Source Object: VA_ALERT
Source Module:Referenc.olb
Source Object: VA_BUTTON_TEXT
Source Module:Referenc.olb
Source Object: VA_CANVAS
Source Module:Referenc.olb
Source Object: VA_CURRENT_BUTTON
Source Module:Referenc.olb
Source Object: VA_CURRENT_ITEM
Source Module:Referenc.olb
Source Object: VA_DISPLAY_ITEM
Source Module:Referenc.olb
Source Object: VA_FRAME
Source Module:Referenc.olb
Source Object: VA_LOV
Source Module:Referenc.olb
Source Object: VA_PROMPT_TEXT
Source Module:Referenc.olb
Source Object: VA_TEXT_ITEM
Source Module:Referenc.olb
Source Object: VA_TOOLTIP
Source Module:Referenc.olb
Source Object: VA_WINDOW
Source Module:Referenc.olb
Source Object: ABOUT
But i have given the the path of the folder that has all the files in the Forms_Path registry and also in the default.env file. Still i am getting the above error. Any solution for this?.

You are getting this error because the "Referenc.olb" object library (OL) is not in your FORMS_PATH. You can either add the directory where the OL resides to the PATH environment variable or (preferably) you add the directory to the FORMS_PATH in the Windows Registry (assuming you installed Forms on a Windows computer). Modifying the FORMS_PATH is dependent on the version of Forms you installed. For Forms 10g, modify: HKEY_LOCAL_MACHINE => SOFTWARE => Oracle => KEY_DevSuiteHome10g => FORMS_PATH String Value. For previous versions of Oracle Forms, modify: HKEY_LOCAL_MACHINE => SOFTWARE=> Oracle => HOME? => FORMS??_PATH (where ? = 0 - 9 depending on the number of Oracle products installed, and where ?? = 60, 90 if you have Forms 6 or Forms 9i installed (FORMS60_PATH or FORMS90_PATH).
Hope this helps,
Craig B-)
If a response is helpful or correct, please mark it accordingly.

FRM-18108 Failed to load the objects

I have upgraded the forms from 4.5 to 6i and when I tried to open the form PCOECU20 it gives me error
FRM-18108 Failed to load the following objects:
Source Module: PCOEar10
Source Object: STRUCTURE_NAME_QF_LOV
Source Object: pc_object_Group1
... and several others...
The form and libraries (pll, plx) are in the same directory.
Can anyone help?

Make sure you upgrade any object libraries or reference forms before the forms thta depend on them.
Also set your Forms60_path explicitly so you know that you are using the correct versions

Failed to load the folio on Desktop Viewer

Hi all
We've created a ebook(folio) which contains 19 articles. After exported it from the DPS, I tried to open it on PC, ipad and Galaxy.
I tried on 3 PCs. It works perfectly on 2 (one running Win7 and the other running WinXP, both have InDesign CS6 installed). But it failed on another PC running WinXP, which doesn't have InDesign installed. Among the 19 folios exported from DPS, only 3 can be opened. When openning the others, it shows "Error Failed to load the folio".
I did some search before, some said PDF folio is not supported on Desktop Viewer. Though I don't know which format it is, but if it's true in my case, it shouldn't have worked on the other 2 PCs, right?
I wonder if having InDesign installed make a difference? Or it's something else?
Some of my clients use PC to read the ebook - it gotta be solved asap.
Any help will be appreciated!!
Thanks very much!!!

Adobe Content Viewer on the desktop is only intended for previewing folios while doing design work. It's not meant to be a distribution mechanism to clients. If you don't have InDesign installed chances are it won't work.
Neil

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Failed to load the configuration file for the workflow

Hi experts, yesterday I created and publish custom workflow using SPD from client pc using site administrator account but today its shows error message. I tried creating new test workflows, edit and publish to think it will push a fresh SPD settings
in working condition and it works pretty right.
But the thing I noticed after closing SPD Im not able to re-open workflows and it gives the same error message Failed to load the configuration file for the workflow. This issue only happen today since day one I used SPD and all the time
Im using the same pc.
Any ideas will be appreciated.
Cheers, R2C3 ----------------------------------- starting sharepoint :)

HI
Maybe you have permission problem or there is invalid xoml murkup.
To verify this from SharePoint Designer use the following steps.
In Office SharePoint Designer, in the folder list, select the plus sign next to Workflows library to expand it
1.Next select the plus sign of the workflow in question to expand it
2.Double-click the configuration file (Workflow_name.xoml.wfconfig.xml) to open it
3.Right-click on the page, and then select Verify well-formed XML
4.Correct any errors and save the file
5.Reopen the workflow to test
Also double check that you are using SPD with the same credentials you created workflow
Hope this will help.
Regards,
Marcin

Failed to load the FastBrowserSearchPlugin plugin.

Failed to load the FastBrowserSearchPlugin plugin.
* -[BrowserWindowController currentWebView]: unrecognized selector sent to instance 0x7bb760
Anyone know why I am getting this message, which then causes Safari to crash, and how I can re-install the missing plug-in?

HI,
You need to uninstall the plugin. Go here. http://help.fastbrowsersearch.com/
Carolyn

Failed to load the following objects....

I sublassed some objects from an object library. They worked well for while. However, after I installed some other oracle software, I opened the form again I got error message:
FRM-18108: Failed to load the following objects.
Even I edited the subclass information property to re-enter the information again, I still got the message.
Any way to correct this.
Thanks.

Thanks.
Now, the message is gone.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Suresh Rangaswamy ([email protected]):
your registry got screwed-up. Check the forms path in the registry (forms60_path)<HR></BLOCKQUOTE>
null

Im failing to load the bootmgr before windows 7 installation.

Similar Messages

Maybe you are looking for