Im getting a blue screen in the develop mode

ive just got LR cc and wheni go to the develop module all i get is a blue screen with two white lines. ifi do bfore and after it just shows the before photo but i cant edit,,, please help

Go to the performance tab in your Lightroom preferences and uncheck the GPU acceleration checkbox.

Similar Messages

  • I get a blue screen; tried the single boot and get "audit space low"; how to I get the computer to start again?

    I get a blue screen; tried the single boot and get "audit space low"; how to I get the computer to start again?

    In the text you say you are using Snow Leopard. Snow Leopard will not operate on a G4 (or any Mac with a PowerPC processor). Leopard OS 10.5 is the max OS for PowerPC processor Macs. Your profile shows OS 10.5.6. What OS are you using (or trying to use)?
    Will the PB boot using a systen install DVD?
     Cheers, Tom

  • Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP.

    Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • Why do I get a blue screen on the Ipod touch camera function occasionally and it is frozen

    Why do I get a blue screen on the Ipod touch camera function occasionally and it is frozen?

    I just baught a new iPod and had the "blue screen" problem with the camera. Your suggestion to "Reset" fixed the problem:
    lllaass wrote:
    - Reset. Nothing wil be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    Thank you!

  • Upon start I get a blue screen with B817977E

    HP Photosmart C8180-all in one. I use a Mac Pro laptop. I updated the driver 4 years ago to my Mac.  This year while in Fl I went to turn on the printer and I get a blue screen with the number B817988E on the screen. I haver tried re booting by unplugging both ends of the printer cord, but this does not work.  Holding the on button in does not work.  If it does come on My computer connects wirelessly, but does not print.  Then it will not shut down.

    lonnlar,
    This article should help resolve the error you are getting:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
    Give the steps a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

    hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

    I'm having same problem in develop module which is laggy as hell compared to LR5.8
    Library module is fine but develop module is slow as hell....5 seconds to make ANY adjustment.

  • Lightroom 2015 version on creative cloud I am getting a blue screen with x mark when i am switch from library to develop mode

    Lightroom 2015 version on creative cloud I am getting a blue screen with x mark when i am switch from library to develop mode

    Hi Chandan,
    Kindly try the below mentioned link.
    Adobe Photoshop Lightroom Help | Lightroom GPU FAQ
    Please share the results once you have tried the steps.
    Thanks,
    Atul Saini

  • On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

    On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

    I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!

  • I am trying to connect my iPad to my windows pc ( xp) but it does not recognise the iPad and I get a blue screen error causing the pc to shut down. Any ideas

    I am still not able to connect my iPad 2 to my Pc ( windows xp). When I try to do so I get a blue screen error and the computer shuts down. I have reinstalled iTunes. iPod works fine. Any ideas?

    Not sure, but try these.
    Disable your firewall and anitvirus software temporarily. 
    Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
     Cheers, Tom

  • HT1752 my powerbook g4 will not boot up. i get a blue screen. i have tried to start up in safe mode, but get the same blue screen.

    My Powerbook G4 (with Snow Leopard operating system) will not boot up, I get a blue screen. I have tried to start up in safe mode by holding down shift key after startup tone, but end up with same result...blue screen. I need important photos and documents of this laptop, Even if I can just get it started up one more time. Need help fast! If you know what to do, please message back.

    In the text you say you are using Snow Leopard. Snow Leopard will not operate on a G4 (or any Mac with a PowerPC processor). Leopard OS 10.5 is the max OS for PowerPC processor Macs. Your profile shows OS 10.5.6. What OS are you using (or trying to use)?
    Will the PB boot using a systen install DVD?
     Cheers, Tom

  • Get the blue screen but the TV doesnt find the signal from my mac via hdmi

    Before my mac could connect to my TV Samsungs LE32B350 without any problem, but now it just keep saying no signal from the tv. I get a blue screen when I connect the hdmi on the laptop for one sec then nothing happens. I have tried search for more screens but aint finding anything.
    Please help me

    Unfortunately older G4 minis are very touchy about certain hi-res monitors when run from DVI. Hi-res in this case means any monitor whose resolution causes the pixel clock to be above 135 MHz. It is normally the case that 1680 x 1050 timing will have a pixel clock above 135 MHz, although there is no way to observe that directly from within OS X.
    There are only two known work-arounds for the issue. One is to run the monitor over a VGA interface. The other is to use a program like SwitchRes X to lower the pixel clock below 135 MHz. If you choose to do the latter, write back if you'd like some guidance on how to do that.

  • Lightroom cc in the develop mode insted of showing the picture there is blue screen

    lightroom cc in the develop mode insted of showing the picture there is blue screen

    Try disabling the GPU option: Preferences>Performance tab.
    Probability is that some other app has enabled a setting (FPS?) on the graphics card which causes Lightroom a problem. So disable the setting in Lightroom first, to get you going again, then you can try to figure out what needs to be changed on your system to get it working again.

  • When I load itunes it defaults to the store and then I get a Blue Screen.  Does anyone know how to change itunes so that it will default to My Music rather than store.  I need to be able to do this before I load itunes.

    When I load itunes it defaults to the store and then I get a Blue Screen.  Does anyone know how to change itunes so that it will default to My Music rather than store.  I need to be able to do this before I load itunes.

    I solved the problem with the assistance of apple support knowledgebase.  Refer to TS3441.

  • I get a blue screen whenever I unlock it and I have to keep turning it off and on to get the slide to unlock to appear

    Have iPod touch and I get a blue screen whenever I unlock it & I have to keep turning it off and on to get the slide to unlock to appear.

    Reset the Device:
    Hold the power button and the home button down until the device shuts off, then power it back on and see if the problem is resolved.
    That won't remove any data. I hope that works.
    ~Lt. Leviathan

  • HT4848 Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do

    Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do ?

    If this is a fairly new Mac running either v10.7 Lion or v10.8 Mountain Lion she can use Lion or Mountain Recovery to repair the startup disk or reinstall OS X.

Maybe you are looking for

  • USB stick no longer working after upgrade to 10.5.8

    Hello, On one my older Macbook Pros I just recently did the recommended upgrade to 10.5.8. Since then none of my memory sticks are longer being displayed in the finder window. Things that I have done -reboot -made sure that external drives are being

  • Error when starting the Method of a business Object

    Hi, A Zworkflow is created for Compensation adjustment in 4.7 . It has been moved to ECC 6.0 . A ZBusiness object is created without a keyfield which has a zmethod is created for updating a infotype 380. Its i/p parameter is a workqueue no. which is

  • How do I do this effect in final cut

    I want to make a timelapse using photos from my DSLR and I want to know if there is a way to do this effect (see link) in final cut pro for multiple clips. A lot of forums out there have people dicussing how they stack or blend time lapse clips at ni

  • Question about multiple CD/DVD-ROM drives..

    One CD/DVD reader, one CD/DVR burner. I like having two, but there is only one CD power port (JCD1). Am I missing something? Also, should I master/slave them and put them under IDE1 or separate the two between IDE1 and IDE2? Thanks for the advice.

  • Require Adobe AIR 2.5 all Package

    Hii, i want to develop applications for android using flash cs5, i have gone through blogs which gives me useful information regarding how to develop android applications using flash cs5. i was tried to use adobe air 2.6. , but as we know adobe air 2