Im getting and error message (-45075) a required i tunes component is not installed please repaire or reinstall i tunes how to fix this
i keep getting this message " a required i tunes component is not installed please repair or reinstall i tunes(-45075)" i get this every time i open the program and it prompts me to say ok and when i do it shuts the program down i went to the i tunes web site and re down loaded the program and still nothing i dont want to loose my music library
Hi mbelanger1,
If you are still having issues with that error message, you may need to entirely remove iTunes, then reinstall it. You may find the following article helpful:
Apple SupportL: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Note:
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and aren't deleted by removing iTunes. While it's highly unlikely that you'll lose any contents of your iTunes Library when following these steps, it's always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, follow these steps.
Regards,
- Brenden
Similar Messages
-
When I started up itunes on my PC I get this error: a required itunes component is not installed. please repair or reinstall ituens (-42404). How can I fixed this? I uninstalled it at least 6 times. Not exactly sure what I'm suppose to repair either. It also says it is syncing my ipod but when I go to disconnect/eject my ipod it says that it is unable to disconnect because files are being used in a program. When it finally disconnects there is no music on my ipod. The gym just ***** with out my ipod. Makes it eiser to not go! Someone please help me!
Use the instructions here to completely remove/uinstall all iTunes/Apple software and componenets and then start from scratch.
http://support.apple.com/kb/HT1923
B-rock -
Message after install: A required iTune component is not installed, Please repair or reinstall iTunes (-45075) Has anyone seen this?
Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I'm trying to rip a CD to iTunes and am getting an error message that I don't have privileges to make changes to the song. Suggestions on how to fix the problem?
Hey mprangle,
Thanks for the question. The following resources may help to resolve your issue:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M. -
Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?
Find out what that third party software the kext file belongs to and update or use the developers method to uninstall the third party software responsible for it.
I suspect it's a iTunes extension perhaps?
You also can use the manual method of Finder > Go > Computer and opening your drive, then your System/Library/Extensions folder and looking for the file and moving it out onto the desktop, you will need to be in Admin user and use your password, then reboot to clear the random access memory. However this method doesn't remove the parent program you still need to do that.
How to uninstall/install software on your Mac
The kext file wasn't loaded, so it's not running, but removing it from the Extensions folder or uninstalling what put it there will solve your notification problem as that's all it appears to be. -
I get an error message when trying to start iTunes. I've tried reinstalling 3 times with no change.
Message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)
Any ideas would be appreciated!Have a look Here https://discussions.apple.com/docs/DOC-6562
-
I am having a problem accessing Bupers Online on OS X Mountain Lion. I get an error that says Safari cant establish a secure connection with Bupers Online. Does anyone have any tips to access Bupers?
I don't use CAC certificates, but since updating to 10.9.3, I too am getting the same error, BUT only with some HTTPS sites (e.g., https://webmail.pairlite.com), not all. Meanwhile, Firefox (was 12.0, now 29.0.1) connects with no issue.
I too have verified date/time is set automatically, checked for (and fixed) disk integrity errors and permissions, and rebooted, all to no avail.
Update:
Well...heck. Tried accessing the problematic site via the Guest account, and that WORKED. So...back to the drawing board. -
Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.
I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be told the Support Advisor no longer exists!! A blind loop. I need to have Photoshop CS6 installed...what do I do from here??
The CC Cleaner Tool assumes the Akamai Download Manager is activated and it has not. It seems to be the missing file that triggers the error message. \in a previous re-install I was prompted to download & install the Akamai Download Manger, but not this time. Is there somewhere on the Adobe website that I can download it??
-
I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, MarkUnfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems. -
i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)
The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working? -
When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List. -
I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download. I don't know how to tell which of the photos is corrupted so that I can delete it and try again? Thanks!
If this is an iCloud account the Outbox only appears when sending an email, so if it is still trying I suppose it should be showing now (not sure though, hard to replicate this)
What type of email account? -
I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted. Please check your internet connection or try back later.
My internet works fine and I have tried back dozens of times with same result.Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I purchased an album from iTunes using my desktop computer. All of the songs from the album are on my computer and play perfectly. When I try to sync the songs to my iPhone or iPad, I get an error message that says 3 of the songs can not be downloaded to these devices. Any ideas?
Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though
Maybe you are looking for
-
A FM for the Sales Document Flow ...?
Hi Friends; I know that the Sales and Distribution Flow is kept in table VBFA .? But is there a ready function module that gives me the shipment note number and invoice number taking reversals into consideration and giving the actual and final flow
-
How can I prevent a Magic Mouse on a new 27" iMac in another room to stop moving the cursor on my iMAC? Is there a pref. that needs set? As I know this isn't happening in the Apple Store, but it sure is at my home office! Please help.
-
There is a large flashing advertisement at the top of the page. Problem is, this is appearing on pages that shouldn't have any advertising. == This happened == Not sure how often
-
Infopackage loads 0 record in process chain
Hi All, I have scheduled a daily process chain for Purchasing. The infopackage in the process chain loads 0 records and shows green status. But when I load the data manually the infopackage fetchs the record form R/3. Kindly help me on this issue. Re
-
Hi I am looking for a column named Commodity Code from the EBS data base. After a lot of investigation, and in one stage we decided to do some customization for the column. But we find that column in the flat file named 'FILE_UNSPSC' in the src files