Im haveing a fault with my exchange acct all settings are correct

i added my gmail acct and password.. it keeps coming up to re-add password and everytime i enter it corrct it will not accept it so i cannot sync mail

I would restart the iPad and then try to correct the password again - making absolutely sure that it is correct - upper case and lower case letters in particular - and if that doesn't work, you may be better off deleting the email account and starting all over again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Similar Messages

PC no longer communicates with printer, all settings are correct??

Suddenly I am uable to print from my pc or scan to my pc. The messages I recieve are:
Scanner Unreachable
Scanner communications cannot be established
Might need to update IP Adress
Scan to computer is disabled
I have rebooted everything several times. My IP address on my pc does not match the address on my printer, but I cannot figure out how to change the IP Address on the printer, nor am sure that is the right move.
Would greatly appreciate some help!
Regards
hap10

Greetings @hap10
You don't mention which printer or operating system you're running, so I am going to give you some information that might help. If you wish to let me know your OS and model number, I will look into specific troubleshooting documents to provide you links.
Personally, I think it sounds like running your printer is disconnected from your network.
First, make sure you can make standard copies from the printer before you continue. This tests out the hardware to make sure the printer is in good functioning order before getting any deeper into troubleshooting.
Next, try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
If the printer does not connect to the network automatically after the power cycle, check on the printers front panel menu to see if there is a "Wireless Setup Wizard" you can select and run through. This wizard searches all near by networks so it will allow you to select yours, and then enter the WPA/WEP password and connect to the network.
If the printer connects to your network, now check to see if you can scan and print.
Let me know how you make out and if there are still troubles, let me know your OS and model number.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How Do I Find My Model Number?
I hope you're having a great Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Friend Recommendations: we're having trouble communicating with the game center server and are unable to turn on friend recommendations. Does anyone know how to fix this?

Friend Recommendations: we’re having trouble communicating with the game center server and are unable to turn on friend recommendations on our iPad. Does anyone know how to fix this?
we also get this error message when we try to connect the iPad to Facebook from the Candy Crush Saga game..... Failed: Sorry, you don’t have access to the Kingdom, right now. Please try connecting again later. anyone know how to fix this?

Welcome to AD!
I have a regular post for the top 3 or 4 fixes for that 9808 error. Obviously you are going to skip #1, since you've already tried it. Let me know how you get on with the next 2.
The top 3 fixes to itunes error 9808 seem to be
1) Go to Start > Control Panel > Internet Options > Advanced, make sure that SSL 3.0 is checked and TLS 1.0 is checked. Also under Security make sure that the “Check for server certificate revocation (requires restart)” is unchecked. Then click ok and fire up iTunes.
2) The culprit was Norton. The users are set up as Admin and Standard. I have Parental Controls turned on in both Vista as well as Norton. Admin users had no problems connecting to iTunes. Standard users would get the error. I had to go to Norton’s Personal Firewall and add the program “iTunes Helper.exe” and set the option to “Allowed” (”iTunes.exe should already be in the Allowed category.) in order for the standard users to be able to connect.
3) close iTunes if you have it open right now. Then go to C:/Documents and Settings/username/Local Settings/Application Data/Apple Computer/iTunes. Delete or cut the preferences.xml file which contains your iTunes preferences. Then go to C:/Documents and Settings/username/Application Data/Apple Computer/iTunes and delete or move the preferences.xml file. For Mac users, there is only one file you must delete or move a to a new location and is located at User > Library > Preferences > com.apple.itunes.plist. Restart iTunes and it will recreate those two (or one) files with the default settings. Feel free to set your preferences back to what they were and then connect to the iTunes store and enjoy!
And #4, see if you can get into the iTS from a different windows admin account on the same PC.

Hello, starting with today I have a strange problem: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file.

I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

This what I have been trying...... Maybe my eyes are screwed up or don't understand the process....
What I have been trying to do is squint and make the apple disappear by moving the sliders around in each step. Is that correct?

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?

Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host>

I can't download videos to Real Player. The settings are correct and i can download in Internet Explorer 7 with no problem but not FireFox 5...any ideas??

I can't download videos to Real Player. The settings are correct and i can download in Internet Explorer 7 with no problem but not FireFox 5...any ideas??

I'm still experiencing this problem. I went to settings, general, software and it says Install now. But when I try, I get an error message.

TS3276 I am not able to Mobile Me email account to connect with iCloud or my Apple Mail program. Don't know if my settings are correct or not. Can anyone help me with this please?

I am not able to Mobile Me email account to connect with iCloud or my Apple Mail program. Don't know if my settings are correct or not. Can anyone help me with this please?

http://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards.

Can be set with one click that all senders are approved?

Can be set with one click that all senders are approved?
Example: folder inside POP3/IMAP have many folders. Can be approved email sender's or each sender needs to be added into UNwanted list?

Hi,
I'm not sure if I understand the request clearly, it seems you want to find an easy way to set all the mail senders in a folder as blocked senders or safe senders, correct?
I'm not sure which version of Outlook you are using, for Outlook 2013, there's no such quick method to do that by one click, you will need to use the Junk E-mail Options to add the senders to the Safe Senders or Blocked Senders list.
You can learn more information from Use Junk Email Filters to control which messages you see:
http://office.microsoft.com/en-us/outlook-help/use-junk-email-filters-to-control-which-messages-you-see-HA102749438.aspx
From the link above, please note if you have existing lists of safe names and addresses, you can move that information into Outlook. Click
Import from File and browse for the list file that you want. To create a file that uses your current list, click
Export to File and then specify where you want the new file saved.
Regards,
Melon Chen
TechNet Community Support

Your Account is no longer synchronized with your device. Check that your account settings are correct. If they are correct, contact your email service provider.

Hey everyone,
I have a Blackberry Q10 with T-Mobile and have had the following error message appear over the weekend:
Your Account is no longer synchronized with your device. Check that your account settings are correct. If they are correct, contact your email service provider.
My Blackberry is trying to connect to Office 365 for its e-mail. I tried to remove the account, then re-add it, but the e-mails seem to not come in as quickly as it should. I have also tried the Delete Prior and Mark Prior message options, but still no luck.
Does anyone have a solution for this issue? Does it have to do more with Office 365 or the BES server?
Many thanks in advance.

Have had issues with z10 but try the following: -turn wifi off when activating Active Sync -do not use a double quote character in your password email account -try using Outlook account option in drop down list of email account types in your z10. Works great. Hope one these helps. BlackZ10

I have an iphone 4 with a talkmobile contract sim. I am unable te send or receive mms. I have spoken to talkmobile customer service, my phone settings are correct. Aplle say that it is a network problem, can anyone help?

I have n iphone 4 with a talkmobile contract sim. I cannot send or receive msm. I have spoken to talkmobile customer service, my phone settings are correct,Aple say it 8is a network problem!! Help!!

talkmobile is not a supported carrier. It's very likely that you have the same problem suffered by people who attempt to use T-Mobile in the U.S. MMS simply will NOT work because the network is not compatible with the iPhone. If you want full functionality, you will have to switch to a supported carrier.
A list can be found here: http://support.apple.com/kb/ht1937

Having trouble communicating with ipod says software was not installed correctly and then asks if i want it repaired but couldnt need help

Having trouble communicating with i pod says software was not installed correctly and asks if i want it repaired but then says could not be repaired.Installed uninstalled numerous times but nothing dont know what else to do.

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

Anyone having same prob as me? I updated to 8.1.3 and lost photo stream - all settings are set for photostream updating - the blue shirts at the Apple store seem to think that the feature was removed with the 8.1.3 update

Is anyone having same prob as me? I updated to 8.3 and lost photo stream on my photos - all my settings are set for photostream updating - the blue shirts at the Apple store seem to think that the feature was removed from the phones with the 8.1.3 update but it is not mentioned anywhere on Apple's site

found it
http://gimutaowebsolution.com/missing-photos-on-ios-8-3-or-8-x/

Having a problem with iphone 4S. Phone calls are getting dropped and cutting in and out.

I seem to have very little or no service at all recently.
All my calls are cutting in and out or hanging up in the middle of a conversation. I have to stand in the corner or my kitchen to get a clear call or get at least 2 bars.
I called Verizon yesterday and tried a few things they suggested but nothing worked.
I dont have another phone to call them back on since they suggest we call from a different phone until the late evening. Someone was supposed to call my back and never did.
Not sure on what else to do.
I am extremely frustrated and annoyed that I cant even really use my phone.
HELP

If the on/off switch does not work, that is a hardware problem. The other problems may be related to a hardware problem or faulure as well.
Make an appointment at an Apple store if there is one nearby to confirm.

Messages sent with Thunderbird do not get to recipient, but I can use other email clients that do. Settings are correct and I can check webmail and see in sent.

When I send an email it says that it is sent, but it never gets to the recipient. I am using multiple email addresses to check this and have looked in spam and all folders and the message is just not actually going through. I can log in to web-mail and the message appears in the sent folder and I can resend from web-mail and instantly the mail is received. I also installed another email client program and it is able to send mails and they go through instantly. Only Thunderbird is having issues with this. I have tried uninstalling and rebooting and then re-installing and after setup I still can not get emails to go through. If this is something simple with a setting for Thunderbird I would love a fix as we have been using Thunderbird for 6+ years. Otherwise I will just have to use the other program as it works with no mess

Application Basics
Name: Thunderbird
Version: 24.6.0
User Agent: Mozilla/5.0 (Windows NT 6.0; rv:24.0) Gecko/20100101 Thunderbird/24.6.0
Profile Folder: Show Folder
(Local drive)
Application Build ID: 20140610001341
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Crash Reports: about:crashes
Memory Use: about:memory
Mail and News Accounts
account1:
INCOMING: account1, , (imap) imap.secureserver.net:993, SSL, passwordCleartext
OUTGOING: smtpout.secureserver.net:465, SSL, passwordCleartext, true
account2:
INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
Extensions
Important Modified Preferences
Name: Value
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
extensions.lastAppVersion: 24.6.0
font.name.monospace.el: Consolas
font.name.monospace.tr: Consolas
font.name.monospace.x-baltic: Consolas
font.name.monospace.x-central-euro: Consolas
font.name.monospace.x-cyrillic: Consolas
font.name.monospace.x-unicode: Consolas
font.name.monospace.x-western: Consolas
font.name.sans-serif.el: Calibri
font.name.sans-serif.tr: Calibri
font.name.sans-serif.x-baltic: Calibri
font.name.sans-serif.x-central-euro: Calibri
font.name.sans-serif.x-cyrillic: Calibri
font.name.sans-serif.x-unicode: Calibri
font.name.sans-serif.x-western: Calibri
font.name.serif.el: Cambria
font.name.serif.tr: Cambria
font.name.serif.x-baltic: Cambria
font.name.serif.x-central-euro: Cambria
font.name.serif.x-cyrillic: Cambria
font.name.serif.x-unicode: Cambria
font.name.serif.x-western: Cambria
font.size.fixed.el: 14
font.size.fixed.tr: 14
font.size.fixed.x-baltic: 14
font.size.fixed.x-central-euro: 14
font.size.fixed.x-cyrillic: 14
font.size.fixed.x-unicode: 14
font.size.fixed.x-western: 14
font.size.variable.el: 17
font.size.variable.tr: 17
font.size.variable.x-baltic: 17
font.size.variable.x-central-euro: 17
font.size.variable.x-cyrillic: 17
font.size.variable.x-unicode: 17
font.size.variable.x-western: 17
mail.openMessageBehavior.version: 1
mailnews.database.global.datastore.id: 088922eb-6a1e-477e-901d-32fc192121b
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1405540688
places.history.expiration.transient_current_max_pages: 66807
Graphics
Adapter Description: Intel(R) G33/G31 Express Chipset Family
Vendor ID: 0x8086
Device ID: 0x29c2
Adapter RAM: Unknown
Adapter Drivers: igdumd32
Driver Version: 7.14.10.1437
Driver Date: 2-11-2008
Direct2D Enabled: Blocked for your graphics driver version.
DirectWrite Enabled: false (7.0.6002.23200)
ClearType Parameters: ClearType parameters not found
WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 7.1500.1000.1666 or newer.
GPU Accelerated Windows: 0. Blocked for your graphics driver version. Try updating your graphics driver to version 7.1500.1000.1666 or newer.
AzureCanvasBackend: skia
AzureFallbackCanvasBackend: cairo
AzureContentBackend: none
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.2
4.10.2
NSS
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS Util
3.15.4
3.15.4
NSS SSL
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS S/MIME
3.15.4 Basic ECC
3.15.4 Basic ECC

Im haveing a fault with my exchange acct all settings are correct

Similar Messages

Maybe you are looking for