Im having problems with loading Google Maps, it takes a while to load up. This has only started doing this recently.I changed to Mozilla from IE Exporer as that was useless.

Mozilla runs fine with other web sites but when I use Google Maps it struggles to load up maps. Looks like there is a constant exchange between Google and Mozilla which is slowing up the loading. This has only been happening about 3 weeks ago, it was perfect before that so maybe it could be the Mozilla update that I accepted.

try replacing the sim card after that it needs to be replaced and since you had some one else open up the phone you would lose the out of warranty replacement price and have to buy a new one at the full retail value

Similar Messages

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

HT203548 I'm having problems with Siri on my iPhone 6. It worked briefly yesterday and now its not doing anything. I have turned phone off and on and made sure everything is on in settings. Please help!

I'm having problems with Siri on my iPhone 6. It worked briefly yesterday and now its not doing anything. I have turned phone off and on and made sure everything is on in settings. Please help!

Do you have an active data connection (wifi or cellular)? Have you tried resetting the phone by pressing and holding the Home and power buttons until the apple appears (this is different than just turning it off and back on).

I am having problems with the Google Internet access on my iPhone 5 since the latest update

I Am having problems connecting to the internet and this started after my latest installation of updates for my iPhone. It is an iPhone 5, version 8.1.2.
I force a shutdown and reboot which corrects the problem for awhile. Is there something else I can do?

Try the following steps and please check after each one to see if the problem has been corrected -
1. "Forget" the network and then reset and add it again
2. Reboot your router - unplug - wait for 60 seconds and plug it back in
3. Temporarily remove security from your router - see if the device connects and then put the security back on again

Having problem with FCP 5.1.4 adding transitions. Just new to this app.

So I get 2 maybe 3 transitions set correct. After that none work properly. ie: lets go for the quicktime zoom transition. So as it zooms out it plays the first quarter of the 1st part of the transition in the zoom box. This is not correct it should be playing the second part of the transition. Anyway about 1/4 of the way through it does play the second half of the transition which is correct and plays the rest of it properly. It does the same for cross dissolve and all other transitions. I have trashed the preferences but that doesn't seem to help. I have also changed the preferences and that doesn't help. OS is 10.5.8; 6g of ram; powermac g5 quad core 2.5ghz;
Please if anyone can help.
Below I entered FCP 6 because 5 was not available.

Just to clarify, by "FCP 5 friendly source material," he means video files that are a format (codec) that FCP 5 supports. What FCP 5 supports can be found in the EASY SETUP list. If the format you are working with isn't there, say if your footage is H.264 or MP4 or some other web compressed format, FCP won't work properly. It needs to be in an editing codec if you want FCP 5 to work with it.
Also, you need to make sure that your sequence settings match the settings of the footage you are trying to edit. If you add a clip to the sequence, and immediately have to render, that's a big clue to say that something isn't right. You should edit without rendering at all.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu. Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured

Still having problems with loading cs6 onto new computer. adobe won't contact me?

I have posted this before and I did what was suggested, but have not had any luck with adobe support.
Problem: Mac laptop died. I have cs3 and upgrade to cs6 on the laptop, backed up to external hard drive. i'm trying to install now onto my new computer, but can't load it from the external hard drive, so downloaded cs6 upgrade from adobe from my products. i know i purchased and downloaded cs3 from adobe website, but it doesn't show up on my page. so when i download cs6 and it asks for my serial number, i put it in, but then it won't unlock the software because it's not detecting any other software (cs3) on my new computer. i was told that i had to contact adobe tech support, which i have done multiple times, but have not gotten any response back.
any suggestions?

Oh that's awesome!
Yeah, I have done similar things, that's why it came to mind lol
You're welcome, even though I wasn't a whole lot of help on this issue...
Have a great evening and feel free to return to the forums if you need any other assistance.
Benjamin

Having Problems with loading a ReportDocument

Hello all. I've developed an ASP.NET 2.0 application in C#. As per documentation I've previously, my app loads a report based on a file path string. It then sets the logon credentials. When the user views the report, the report sets the necessary parameters accordingly and the ReportViewer sets the ReportDocument object as its datasource.
The problem I'm having is that the ReportDocument.Load() method seems to take considerably longer than the other functions involved in generating the report. This function takes roughy 20-35 seconds to execute and consequently degrades the performance of the web app. Is there anything that can be done to speed up this method? If not, are there any other methods of generating a report to display in the ReportViewer? I tried using the ReportSource control and it was very unstable. Any help would be greatly appreciated. Thank you.

Hello Mark:
You are seeing a "normal" behavior, if this is the case on the load of a first report. Subsequent reports should be significantly faster. Only way to make the first load appear faster is to load the CR assemblies and dlls on app start. E.g.; load a fake report on app start. Unfortunately, those 20+ seconds will now move to the initialization / load of the app...
Ludek
BTW., downloading the latest Service packs is never a bad idea and may help a bit, but not 10+ seconds for sure.

Having problem with loading Oracle 8.1.7 on Linux-Mandrake 8.0

I have done all necessary files that needed to be downloaded and installed. When i try to run "./runInstaller" it gave me an error saying that a whole bunch of files were unowned and on top it would say System Monitor ok. Please help....Thanks

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Laran Coates ([email protected]):
I've installed the updates for glibc but the installer just hangs at the first screen. I get to the screen where I can click to see previously installed products, deinstall products, or click next to continue with the install. When I click next though nothing happens.
I've done the LD_ASSUME_KERNEL=2.2.5 but it didn't change anything.
Does anyone have any ideas how to resolve this situation?<HR></BLOCKQUOTE>
Are u using KDE? try switching to gnome. I hit this problem after updating to the lastest kdelibs but switching to gnome work fine for me. Remember not to create the database during installation, apply the oracle patch, then everything will be OK.
null

Having problem with loading music on Nano

Just updated both the Windows and iPod software and now am experiencing problems. The iPod connects, iTunes starts but the updating takes forever. I think it is done quickly, but don't know for sure as the link between them does not ever state that it's done. I finally have to kill the iTunes to gain control of the iPod. This doesn't seem right. Any suggestions????

I've got a prob kinda like that.. i have an ipod 20G and i recently got a nano 1G. so i name d ipod and transfer playtlists to it. it all seems fine on itunes but when i disconnect my ipod there's nothin on it!(?)
also, mine is a 1G ipod but it sez that 588 MB has already been used.. and i havent loaded a single thing onto it..(im absolutely sure i havent loaded a thing)

Having problems with loading video onto my timeline. Video is from archive mini tape that has been archived then imported

I have Final Cut Pro X 10.1.4
The film I have loaded is from a mini tape JVC VU A308kit...
I have loaded the film onto an external HD then I archived the video and imported it back into FCP.
I created an event then a project.
I have loaded the project onto a timeline , however the project won't play at a normal speed, it plays in fast motion!!!
Can you help me???
Cheers Mr T

cady0139 wrote:
I can't get my files into quicktime.
If you select one of the clips in the browser and look in the Inspector>Info, what does it report at the very top on the panel?
Do you still have the tape? If you do, you could capture it with QuickTime to avoid getting such small clip fragments,
Russ

Having problem with mackeeper coming on when searching how do I rid of this or other sites coming on under my search site

I tried to install mackeeper and thought it was free and because of popups and ads. Now I'm having more problem it comes up when searching. I would like to go back to week ago them the way my system works now to get rid of but don't know how and no one i know can tell me. Help I'm not computer smart

1. Uninstall MacKeeper as suggested by db24401.
2.Identify and remove adware
   http://www.thesafemac.com/arg/
   or
   download and run Adware Removal Tool.
    http://www.thesafemac.com/art/

I have an iPod nano gen 5, having problems with the newer version of iTunes. Any one else havinhg this problem?

My ipod nano gen 5, will not be indentifed by the new version of iTunes. Is anyone else having this problem?

Yes - I downoaded an album to my laptop and can" "sync" the album to my nano.

Beginner Has Problem With Loading JDBC Driver Using MySQL

Hi, I am having problem with loading JDBC driver, and need your diagnotic help.
1. I have installed MySQL (C:\mysql), created a databse (soup), and created a littel table (VIDEOS). I am able to see the table in the console:
sql> select * from videos
2. I have downloaded the latest version of Connector/J (mysql-connector-java-3.1.0-alpha.zip), and unzip the zip file into my C:\ directory.
3. I copied the mysql-connector-java-3.1.0-alpha-bin.jar to the C:\j2sdk1.4.1_02\jre\lib\ext folder and it is in my CLASSPATH
4. MySQL server is running
C:\> C:\mysql\bin\mysqld-nt --standalone
5. open another DOS window and use the database
mysql>USE SOUP
6. succesfully compiled a Java program (javac Test.java):
import java.sql.* ;
public class Test
public static void main( String[] args )
try
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
try
Connection con = DriverManager.getConnection( "jdbc:mysql://localhost:3306/soup" );
try
Statement statement = con.createStatement();
ResultSet rs = statement.executeQuery("SELECT TITLE FROM VIDEOS");
while ( rs.next() )
System.out.println( rs.getString( "TITLE" ) );
rs.close();
statement.close();
catch ( SQLException e )
System.out.println( "JDBC error: " + e );
finally
con.close();
catch( SQLException e )
System.out.println( "could not get JDBC connection: " + e );
catch( Exception e )
System.out.println( "could not load JDBC driver: " + e );
7. when I run the Java program (java Test), I got
the message:
could not load JDBC driver: java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
What am I missing?

Hi,
I missed to specify test in my last post.
Try running your program by explicitly setting the classspath when
running your program . java -classpath c:\mysql-connector-java-3.1.0-alpha-bin.jar test
Make sure your jar file contains org.gjt.mm.mysql.Driver class

Having problems with my Firefox toolbar.

Having problems with my google Firefox toolbar. Having problem sending and deleting using the tab. having problems accessing my calendar in new format. I am having problems modifying seachs in my google search engine

If you are are experiencing the same issue downloading something else then it is not a Firefox issue. Also, please have a look at the following as copied from another contributor.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
* https://support.mozilla.org/kb/Safe+Mode
* https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

TS3899 I HAVE IPAD AIR HAVING PROBLEMS WITH EMAIL DELETING AFTER A SHORT TIME WITHOUT COMMAND CAN YOU HELP

Q. I have an IPAD air having problems with my email deleting after a short while without command.

I've had issues like this before.
I ended up having to call my provide to reset the connection, which worked for a while, then quit. i then took it into my provider for a new sim card and had the connection re-established again. I haven't had issues since.
hopefully for you resetting the connection with your provider will do the trick and a new SIM card wont be nessesary.

Im having problems with loading Google Maps, it takes a while to load up. This has only started doing this recently.I changed to Mozilla from IE Exporer as that was useless.

Similar Messages

Maybe you are looking for