Im having the most annoying of Iphone problems. :(

So i've had my iphone a few months, and it all started off fine. However, Recently my phone has been crashing a lot, blue screening, and freezing frequently. I have never damaged it and so i had decided to reset my phone to factory settings and re update to iOS 8.1.3 through Itunes on my MacBook Pro, To determine whether my phone was faulty, or if it was a software related issue. I put my phone into recovery mode and connected my phone, clicked restore, and followed the on screen instructions. When it came to the download (which was only 1.74GB, i usually get 4.4mbps download speeds) i got an estimated download time of 49 hours. I have attempted this multiple times to the same ****** 11kbps download speeds, and it is completely stupid that i am expected to leave my phone alone for over 2 whole days to download iOS 8. Does anybody know any other ways i can do this, or how to improve my speeds> i saw someone suggest connecting to googles free DNS, which i tried and i get the exact same speeds. I left it to download for 11 hours through the night and woke up to only 340mb of the download completed. Someone must have a fix for this, I'm starting to have enough with the Iphone. for 500 pound this just isn't really what you should recieve.

Are you using the latest version of iTunes? Have you temporarily disabled your anti-virus software. Generally, long times like this, especially this late after introduction of updates, are caused by real-time anti-virus scanners. They can slow downloads down to a snail's pace. When I downloaded on my computer, iOS 8.1.3 only took about 10 minutes, but then I have 30Mb/s download speeds. I would look at that.
EDIT: Sorry, as I re-read your post, I noticed you were on a Mac, and probably don't have anti-virus software. I couldn't provide any other explanation.

Similar Messages

My new speakers make the most annoying hissing noise!

I have just purchased a set of creative megaworks 250d, now having owned an older set of speakers from creative in the past (dt surround system) i had expected the same good quality sound and craftsmanship.
What did i get? The most annoying hissing sound in the world!
I switch my system on and it gives out an audible hiss which can be heard upto 5-10meters away, this is completely ridiculous and pretty much ruins any sound which isnt played at a loud level!
Ive contacted creative customer support who told me to return my product? well, fat use that is when i got my system from ebay and apparently the entire range does the same thing anyway?
Please no comments about how my system is setup wrong and whether i have power interference, because just to check this i've been to maplins today to buy a power conditioner/filter (which cost me ?100 i may add) and a ground loop isolator, neither of these made any difference at all, still the digital snake invades my ears every time i turn the system on.
Now i dont know what your trying to pull down at creative labs, but i can guarantee you wont be staying in the market lead making 'high quality computer audio products' that are by design defective. I want a valid solution to my problem please, i see 100 other threads on the internet concerning the same thing and quite frankly its not good enough. How much would it have cost you to install a pass filter inline to the amplifier to reduce this hiss? or is there one and its broken? is it the remote like some people are suggesting?

*BUMP* Any solution would be good? im fairly adept with electronics so dont mind taking the unit apart if a technician would like to tell me how to fix this hiss. Would a low pass filter on the speaker line be a good solution or maybe ferrite coils on the positve wire?, would either of those work before i go out and spend yet more money?

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

New WIN7 System, FFox gives error "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory" - will not go to any site.

New Windows 7 computer. After installing Firefox, every time I bring it up I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
Then Firefox comes up, but will not function at all - can enter url address, but will not respond to ANY clicks, so can not go to any site.

This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

I keep getting this diologue box as I start up Firefox "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. ... what should I do exactly?

I keep getting the following dialogue box when I start Firefox " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions." I am not sure how to find or change the profile directory. I have gone to the Options: General: Save files to ...box but it wont allow me to browse to another file and the box remains blank. ideas please!

See [[Could not initialize the browser security component]]
Continue here: [/questions/780717]

This message [Ubuntu repositories or Mozilla download: " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory....

Ubuntu 11.04: I have been getting this message whenever I install Firefox from the repositories and downloading the tar file. I cannot use Firefox! " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."Firefox does not respond to any addresses or a google search. Indeed it responds to nothing. There is no Profile folder!

Uninstalling Firefox on Linux
* http://kb.mozillazine.org/Uninstalling_Firefox#On_Linux
* http://kb.mozillazine.org/Installation_directory#Linux
* Removing user profile data - http://kb.mozillazine.org/Uninstalling_Firefox#Removing_user_profile_data
After all is done, Restart your system.
Installing Firefox on Linux
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Linux
Check and tell if its working.

Why do I get an alert saying "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. How can I solve it??

The full alert is " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features."
This is just started three/four days ago. I need assistance quickly as I can't access any secure sites e.g bank accounts/homepage etc.

See [[Could not initialize the browser security component]]

When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.

In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library

Some of the most annoying SJC issues:

As I promised I will post some bugs I found. Will start from the most annoying for me:
1. Visual designer does not show JSPF fragment components inside GridPanel or GroupPanel. This is just a terrible issue.
2. CSS cannot be be assigned to JSPF during design time. I understand that JSPFs use CSS of the container page in run time but how am I going to design JSPF without CSS? Do I have to always go to the container page and preview how JSPF really looks? Sometimes when I get back from the container to JSPF it retains the styling but after refresh it gets absolutely styless again.
3. If I am binding the "Rendered" property of a component (such as grid panel), it disappears from the visual designer (after you click refresh) and will never reappear until you unbind it.

(1) VIsual designer does not show JSPF fragment inside GridPanel or GroupPanel: The reason this happens is that GridPanel and GroupPanel are JSF components which encode their own children; you can't put plan markup as direct children of these components (you can't do that for data table either). And a page fragment is going to be an HTML fragment; usually a <div> (look at the JSP source of your fragment). We should try to handle this better; at a minimum preventing the drop (since it doesn't work) but better yet try to fix it if we can. An< f:verbatim> here isn't what you want (this is how you can usually embed html in encoding-children components) because you don't want the JSF children of your html tag inserted verbatim. Somebody in support, can you file an issue to track this one please?
(2) CSS in fragments: That's a reasonable request. The reason it's not shown there is as you suspected; fragments don't have their own stylesheets (stylesheets can only be added to html documents in the <head> section, and fragments are portions of <body>.)
Also, in addition to not knowing which stylesheets are in pages that might include the fragments, we also don't know the context; when you see a fragment included in another page it doesn't just pick up styles from the stylesheets but from the context too (for example, a font-size: 48pt setting on a containing element will inherit right into the fragment). Thus, the fragment needs to know the exact element context it should use too.
If there are multiple pages including the fragment, they might use the same stylesheet if we're lucky, but the fragments will almost certainly have different style element contexts.
As you've noticed, the fragments already show the styling of the last page they were rendered as part of. This is a side effect of model sharing, and it's a bug I didn't think important to fix since it's sometimes nice ;-)
However, I can see the argument that in some cases, especially if a fragment is included by only pages with the same stylesheet, it would be nice to apply those styles in the fragments too, even if it won't correctly include other style contexts from the pages. That's a reasonable request.
(3) Rendered value binding: I agree, we should special case this to make sure rendered is considered true at designtime. I've gotta investigate how that works with some layout components though (like card layout) which I think relies on this (hiding all but one at design time)).
-- Tor
http://blogs.sun.com/tor

HT4623 how do i find out what is taking up the most stoarge on iphone 4?

how do i find out what is taking up the most storage on iphone 4?

Hi,
Actually the real space it needs for download and upgrade it's a bit bigger, few more than 4Gb. Make sure you sync with iTunes so you don't loose anything. Moreover, you can safely delete any app because you can download it later on as it is linked to your Apple ID.
Hope that helps.

I am having trouble downloading an extension for flash, despite having the most up to date flash version for Adobe Manager Extension CC. What would cause this to happen?

I am having trouble downloading an extension for flash, despite having the most up to date flash version for Adobe Manager Extension CC. What would cause this to happen? It says I need to have flash 7 or higher. I have the most update flash available according to my browsers.

If you are using Flash Pro CC 2014, please update Extension Manager CC to 7.2.1. Then please confirm whether Flash is shown in the product panel of Extension Manager CC. If not, please refer to Re: Why can't I see InDesign CC in my Extension Manager CC.

Following the most recent IOS IPhone update our Iphone calendars, contacts and messages have all merged. This problem has never happened before. We all use the same Itunes account as a family and one AppleID. Does anyone know the cause of this problem?

We have 4 Iphones. As a family we have happily shared the same ITunes account and one AppleID. After the most recent iPhone IOS update all our contacts and calendars have merged and we randomly receive some messages that one of us has sent to another contact.
This is causing chaos.
Can anyone help me with:
1. Has anyone experienced a similar problem recently?
2. The records to the individual phones have not been saved been saved separately. After this merging of all the data into one composite record, is there anyway to reverse the change and restore the phones to just their individual records?
3. I guess that the cause may be the common AppleID. I have tried to create my own AppleID but my personal email address is already linked to the existing AppleID so I am blocked from setting up a separate AppleID in my own name. Does anyone know how I can get around this block?
4. Would it be better to create a separate Apple ICloud address for each of us as well? How do I do this?
Many thanks in anticipation,
Peter

This is exactly what happens when sharing a single Apple ID for iCloud and iMessage. Why would you expect any different?

I lost my iphone 4 last night is there anyway i cant track it without having the app find my iphone

i lost my iphone 4 last night is there anyway i cant track it without having the app find my iphone

There is no app needed.
find my iphone is a built in feature of the iphone. If you set it up on your iphone before it was lost, then go to icloud.com and try to locate it.
Otherwise, you cannot track it.

"Use the most recent SAPGUI version" Problem

Dear Guys,
I have upgraded my CRM system from 4.0 to 5.0 and ivew access by using EP60 through ITS server but i am unable to access CRM System.
error message as "Use the most recent SAPGUI version"
and also in my old crm version have java stack but for new version i have not install till yet java stack.
Is this reason or some what different?
PLease reply on urgent basis.
Sachin Jadhav

Hi Sachin,
Please read SAP note 905135.
Thanks and regards,
Dieter

TS5376 iTunes once again won't close. Past versions of iTunes had the most annoying behavior that when ever closed it would immediately reopen. Apple update just installed the latest version and the problem is back. Help.

Past versions of iTunes for Windows had the annoying behavior that it couldn't be closed. If I tried to exit or close the window iTunes would just open back up again. It had gone away, but apple just installed version 11.1.5.5 and it's back! The only way to exit is to open task manager and kill the process. Nothing else seems to work. Guess what Apple, I really don't want to have iTunes open all the time. I think the only answer is to stop using iTunes, since I don't have any Apple devices anyway, and go with a different music player on my PC.

Thanks.
Just in case, we'd better check on another old potential culprit (don't see it reported much lately, though) ... do you have any Logitech gaming software installed on the PC?
If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

Im having the most annoying of Iphone problems. :(

Similar Messages

Maybe you are looking for