Im having trouble with my iophone 5, some friends are unable to send me SMS... Any one know how to fix this?
Can someone help me with receing messages on my iphone 5, some friends are unable to send SMS to me, whilst others can??
Have you tried going to FB's support site?
Also see:
https://www.facebook.com/help/community/question/?id=10153231207570405
Similar Messages
-
I bought a couple of singles and I can only listen to the first half. I have purchased 3 cds since then and they all work fine, it is only these songs and i submitted a report to itunes but it wasn't resolved . anyone have any ideas?
pmacpaige wrote:
I bought a couple of singles and I can only listen to the first half....
They may be corrupt...
If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us -
I used Inkscape on Linux before moved to Mac. Now I am trying to install it
using MacPorts, but libpixman has some problems that has been reported out there.
Does any one know how to fix it without the need to use other way than MacPorts?Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
I am having issues with Internet Explorer showing my picture slideshow it works perfect in Google Chrome and Mozilla Firefox however there is just a blank white box whenever I go to Internet Explorer I'm using a free domain for testing purposes
www.wethepeople.site40.net
Can anyone tell me how to fix this issueCould you please try publishing the muse site to test Business catalyst site using publish button and check if you still facing the same issue? Please share the link to test Business catalyst site you have created.
Looking forward to your reply. -
i had a cracked sreen on my iphone 4S so i took it to a shop that replaced the screen. now i have no signal and no network. i have had a new sim card put in, done a restore and hard reset. can anyone help?
iPhones are not considered user servicable, nor is it possible to legitimately purchase iPhone parts. Apple won't touch that phone. There is no advice we can give you other than what diesel vdub has already suggested.
-
Appreciate if any one help me out to solve this problem ?
Open the Keychain Access in the /Applications/Utilities/ folder and create a new keychain, giving it the name login.
(25187) -
I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!
iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.
-
Friend Recommendations: we’re having trouble communicating with the game center server and are unable to turn on friend recommendations on our iPad. Does anyone know how to fix this?
we also get this error message when we try to connect the iPad to Facebook from the Candy Crush Saga game..... Failed: Sorry, you don’t have access to the Kingdom, right now. Please try connecting again later. anyone know how to fix this?Welcome to AD!
I have a regular post for the top 3 or 4 fixes for that 9808 error. Obviously you are going to skip #1, since you've already tried it. Let me know how you get on with the next 2.
The top 3 fixes to itunes error 9808 seem to be
1) Go to Start > Control Panel > Internet Options > Advanced, make sure that SSL 3.0 is checked and TLS 1.0 is checked. Also under Security make sure that the “Check for server certificate revocation (requires restart)” is unchecked. Then click ok and fire up iTunes.
2) The culprit was Norton. The users are set up as Admin and Standard. I have Parental Controls turned on in both Vista as well as Norton. Admin users had no problems connecting to iTunes. Standard users would get the error. I had to go to Norton’s Personal Firewall and add the program “iTunes Helper.exe” and set the option to “Allowed” (”iTunes.exe should already be in the Allowed category.) in order for the standard users to be able to connect.
3) close iTunes if you have it open right now. Then go to C:/Documents and Settings/username/Local Settings/Application Data/Apple Computer/iTunes. Delete or cut the preferences.xml file which contains your iTunes preferences. Then go to C:/Documents and Settings/username/Application Data/Apple Computer/iTunes and delete or move the preferences.xml file. For Mac users, there is only one file you must delete or move a to a new location and is located at User > Library > Preferences > com.apple.itunes.plist. Restart iTunes and it will recreate those two (or one) files with the default settings. Feel free to set your preferences back to what they were and then connect to the iTunes store and enjoy!
And #4, see if you can get into the iTS from a different windows admin account on the same PC. -
I plug my iphone 3gs into my laptop and it no longer syncs with my iTunes. I've tried all the trouble shooting methods and nothing works. My iPhone doesn't appear on iTunes or under "My Computer." Does anyone know how to fix this?
If AMDS is running, you are using a USB port directly on the computer and not a hub, you have disconnected other USB devices except keyboard and mouse, you have completely uninstalled and reinstalled iTunes as described in http://support.apple.com/kb/HT1925, You have tried cleaning the connector on the bottom of the phone, you have tried a different cable, you have installed the latest USB drivers for your computer, you have disabled your antivirus and firewall, you are running as an Administrator account and you have tried creating a new user on your computer and connected when logged in as that user then you have exhausted my knowledge. The only other thing to try is a different computer. If it isn't recognized on a different computer you have a hardware problem. Good luck!
-
I am facing a lot of troubles as Firebug and my other add-ons are not compatible with the new releases of firefox.
I don't want to switch to any other older version of firefox...
Please let me know how to fix this.. or I request you to provide a solution / work around ASAP.
Thanks...Firebug has development versions that should work in Firefox 4 beta builds. Try the latest version (1.6X.ob1) available from http://getfirebug.com/releases/firebug/1.6X/
This is a beta version of Firebug.
For other add-ons marked as incompatible, you can install the [https://addons.mozilla.org/en-US/firefox/addon/15003 Add-on Compatibility Reporter], this will enable all of your add-ons and you can test to see if they work. If the add-ons do not work you can disable them. Note that the current release version of Firebug will not work, you will need to use the beta version. -
Does any one know how to attach a document from your mail, while you are already in your e-mail, meaning not having to look for your file first and then open the e-mail.
Luis
Good question - and one that a lot of (business) people would like solved!
Your question prompted me to do some research, and I found this workaround posted by Scott Grossberg:
His solution actually addresses a second problem too - how to attach a document when replying to an email message. In your case you may not need to consider the "reply" aspect - but if not right now, it'll come in useful someday!
I've pasted it verbatim - if it works for you (it does for me) then all credit goes to Scott for solving the problem. There's just one thing I'd add to his solution: you will probably want to rename the message, as by default Goodreader gives it the Subject line: Mail with GoodReader attachments.
THE GOODREADER OPTION
1. CREATE the document you want to send.
2. SAVE it to GoodReader (this will require you to buy and install the app).
3. Go to your email and OPEN the email thread to which you want to Reply and attach your file.
4. COMPOSE your Reply.
5. DOUBLE TAP the message.
6. TAP SELECT ALL. This will copy the entire email thread.
7. OPEN GOODREADER on the iPad and go to the file you want to send as part of your Reply.
8. At the bottom of the GoodReader screen you will see an EXPORT icon (it looks like a rectangle with an arrow pointing to the right).
9. TAP the Export button.
10. TAP EMAIL FILE. Depending on your needs, tap either SEND FILE “AS IS” or “FLATTEN ANNOTATIONS.” This will open a compose message screen with the chosen document already attached.
11. TAP in the body of the email screen. TAP PASTE. This will place your composed Reply and the prior email thread into the message.
12. ENTER the Recipients’ names in the TO: field of your message.
13. SEND your email Reply.
The modified version (= when composing a new message rather than a reply):
1 Make sure that the doc you want to attach is saved in GoodReader
2 In the message you are composing, double tap, select all, and then copy.
3 Open GoodReader and select the file you want to attach
4 Select the export button at the bottom of screen
5 Select e-mail file
6 Position cursor in body of the email message, tap and paste. You may want to delete the "sent from GoodReader" text that precedes the attachment.
7 Rename your message (as by default it will be Mail with GoodReader attachments)
8 Add the recipient's address in the To field.
Hope this helps! All thanks to Scott for this workaround. -
Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? ThanksI just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me.. -
I just got a new white iphone 4. When I try to take a video using the camera app, there is only a muffled sound. I never had this problem with my old iphone. I tried to restore it and that didn't help. I checked over all of the settings. Does anyone know how to fix this?? Thanks for any help you can offer!
There is a good possibility that your trimming of the SIM card could have damaged it some way. If the SIM was working in the old phone, then you cut it and the first new phone didn't work and now this phone doesn't work, it leads me to believe it has to do with the SIM card or the account. You are sure there is no problem with the account. Did you check with the provider when you got the iPhone 4 to make sure there was no problem with the account when you could not send or receive SMS? Why can't you just get a micro-sim? The iPhone should have come with one when you purchased it.The iPhone 4 is designed for a micro-sim. I don't believe this is a hardware problem unless the phone has been hacked or modified in some manner.
-
Hi, new ipad2 user. Recieve some emails that should have images but in their place are question marks. any advice on how to fix this would be great. thanks alot..brad
On your iPad - go to Settings>Mail, Contacts, Calendars>Load Remote Images>On. Try that first.
You can also try a reset. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the mail and all other apps. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Maybe you are looking for
-
VirtualBox kernel 2.6.29 patch[SOLVED]
Hi, I'm trying to build VirtualBox from AUR. I tried to apply the patch as instructed, got an error: Verifying archive integrity... MD5 checksums are OK. All good. patch: **** Can't open patch file /home/me/sandbox/abs/virtualbox_bin/src/virtualbox-k
-
Soap Sender Adapter Deactivation
Hallo guys, we are working with an IP started by a Web Service call from a Business Service using a Soap Sender Adapter. Everything works. As we have to test also connections errors, we modify the Adapter setting status "Inactive". The intention is t
-
My operating system was became defective. I backed up all previous files. Operating system has been reinstalled. I need to reinstall TB. How can I access all previous data (e-mail accounts, folders, and e-mail) when I reinstall TB?
-
My Flash .swf nestled under my CSS, .swf links not working
I added some links in actionscript in my swf file and they work great but once inserted into my Dreamweaver file under my CSS the links are not responding. I know that I had to set up the CSS so that the .swf would fit into a desired shape but is the
-
My ipod touch is going weird while playiong videos
i have an ipod touch and i have several videos/movies on my ipod... for some reason they seem to be auto deleting themselves without me even plugging my ipod to my comp..and also when im playing a video/movie the screen will turn green and all i get