Im in bad need of help
i have an ipod mini and i bought $23 in songs off itunes but i had to delete them from my library because my pc said i had no memory left. ok well i went to my brothers to put music from his mac to my ipod and his mac forced me to restore my ipod so i did and now i cant put cant get the songs i bought back. i clicked check for available downloads but it displayed this message. "all items have been successfully downloaded. so i cant get them back, if you can help please do.
Click here and ask for a redownload. In future, keep a copy of your music somewhere other than your iPod, such as on an external drive or backup CDs creatable in iTunes, at all times.
(49910)
Similar Messages
-
My iphone5 was stolen.. pls help how to deactivate it? badly need your help..
My iphone5 was stolen.. i was slept on the bus, pls help how to deactivate it? badly need your help.. its only two months on me
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
Messed Up BAD need DESPERATE HELP
My computer died a week ago, I rebuilt it and put in Final Cut Pro. My movie which is on a Lacie Drive worked great till tonight when it said I ran out of memory (my new HD has 250 gigs unused and my Lacie has over 25 gigs unused). Anyway in SYSTEM SETTINGS I set a new place for my work. Now I can't open any of my Lacie Drive files which contain my movie.
I think I have to reset the SYSTEM SETTINGS to where they were originally but I don't remember where they were.
What do I do? I have so much work to do on this movie and I'm at a loss. It's driving me liteally insane!
Thanks: GeorgeGood Lord, the different between memory AND hard drive storage...
We're talking basic computer... no VERY basic computer knowledge here.
Print this... hold it in your hand. OK got it?
Now,
Close all the programs, everything.
Click the Apple up there on the left.
A box will come up.
Look in the box. (The box will have a GREAT BIG Mac OSX in the middle.
Under that it will say Version _________ (should say 10.4 - and another number, something like probably 8, 9 or 10.
Under that will be PROCESSOR... and then
MEMORY if it reads any less than 2 GB you don't have enough. If it reads 4 or more... you have about enough....
This is the RAM - Random Access Memory, what the computer uses to run all of the programs. What Final Cut Pro uses to run itself, capture video, edit video, display video and render video.
When Final Cut Pro has enough RAM memory to do all of these things, it will quietly perform its duties and give you nice video just as you asked for.
When Final Cut Pro does not have enough RAM it will send you a message "OUT OF MEMORY". What this mans is, Final Cut Pro can not complete the request you made of it without having more memory. Either your machine is maxed out on memory, in which case you cannot do everything you asked Final Cut Pro to do in one request... or you are a cheapskate and need to buy more memory for your computer.
No offense, all our computers have told us we are cheapskates many times over the years.. Final Cut Pro requires lots of memory. Editing Video requires lots more memory. If you will note the bottom of my reply you will note I have 4 Gigs of memory in my G5. Often that is not enough to do everything I want to do in real time. I have decided not to reward my box with more memory but to endure the messages and save my money for a new Intel box....
Bottom line is: More memory is a choice. You'll always need more.
Forgot to explain the difference:
Hard drive space is simply storage.. like a drawer in your desk.. when it gets full you empty it.. if it's not full you can stuff more stuff in it. Do not let your system drive get more than 85 to 90 percent full. That's the drive with with OSX and FCP on it. it will run slow.. maybe even run less than slow...
Same with your scratch disk.. that's the disk you capture video and audio to. It should never be the same as the system disk. Bad news, bad stuff, bad decision, bad, bad, bad....
Hope this helps explain the difference between memory and storage.
Message was edited by: John Criswell
Message was edited by: John Criswell -
i dont have browser configuration service book entries. how can i enable browser on my blackberry 8520?
Hi,
To resend service books to a BlackBerry smartphone, complete the following steps (BlackBerry Device Software 5.0 and earlier):
On the BlackBerry smartphone Home screen, click the Email Settings icon. If running BlackBerry Device Software 4.5 - 5.0, the Email Settings icon may be located in the Setup folder.
If prompted, type the username and password, and then click Log In.
On the main screen, click Help.
Click Send Service Books.
Click OK in the confirmation window.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
Badly need some help: SMS and MMS App DISAPPEARED
Hi there! I got my BlackBerry Curve 8520 a few weeks ago. It was working well until last saturday morning. My "SMS & MMS App" is missing! I tried to look for my messages but I don't see them even after clicking on the Messages App (the one that looks like an envelope)>View Folder>SMS Inbox but I don't see any messages there. How can I get it back?
By the way, the OS is v4.6.1.272 (Platform 4.2.0.118)Yep. I got the question mark when I opened your URL so I looked through the source code for the file:
http://www.rerendered.com/comps/374.m4v
Reloading the page also showed the file.
Call your server and ask them about the .m4v file extension. They may need to update some files or you may need to edit your asp code that calls the file. -
Badly need your help: How to fix my iphone 3gs restoration problem
it's been for a month now that i could not use my iphone 3gs. i encountered some problem which i have difficulty to fix or resolve the problem: Currently my iphone 3gs is in recovery mode (which it seems got stucked). When I plug my iphone to restore it via itunes the message appeared as follows: The iPhone"iPhone" could not be restored. An unknown error occurred (1). I already tried to search the web but could not find any suggestion how to fix it. If there's anymore that encountered the same problem, I highly appreciate if you could assist me step by step. By the way, i bought my iphone 3gs "open or unlocked", so I don't jailbrake. thanks.
You could try to use another USB port, check your security software settings or see if you can restore on another computer.
iTunes for Windows: Troubleshooting security software issues -
Folks, I'm in a world-class bind and need some help badly. I just lost two month of work! It was all written in java 1.6.
The only thing I have left is the jar file.
I've tried a number of decompilers. The one that does the best job is jad. However, considering the sheer volume of code (and the mistakes made by jad), the results are pretty discouraging.
When I decompile, jad throws this error:
The class file version is 50.0 (only 45.3, 46.0 and 47.0 are supported)
I've googled like crazy looking for a decompiler that will handle version 50 class files, but I'm not coming up with anything. Of course, I'd rather have something for free, but I'm willing to fork out some cash on this one if necessary because I really do not have time to re-reconstruct jad's work.
Have you guys had any success decompiling version 50 class files?Probably too late, but how did you delete the code, and what platform are you using? I'd be looking into recovering the lost data before I flailed around trying to decompile Java bytecode.
That said, if you've been using the machine in question since the accident, there's not much hope. All I can do is point you to Subversion and wish you better luck next time.
At least with Java you only have to decompile/rewrite the classes that you hadn't finished; the others will be perfectly usable as .class files.
(Edit:) Incidentally, there's a JAD plugin for Eclipse that might be useful to you when trying to recreate or integrate with these classes. -
hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher murphy"
you can't add or mofidy partition numbers. especially not if and once you have windows installed.
boot from Windows 7 DVD afterwards
but first you have to tell us and Christopher what and how you partitioned your system.
Successful setup of OS X Lion + Data Partition + Bootcamp Win7 Ult
https://discussions.apple.com/thread/3293948
So after many, many hours I think I've finally figured out how to successfully setup Mac OS X Lion on one partition, a seperate data partition, and Windows 7 Ultimate on a Bootcamp partition . Here is a screenshot of my setup on my 13" MacBook Pro
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions costs US$19.95.
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
GParted Live
GParted Live is similar to CampTune as it is also distributed as a bootable image that needs to be copied to a CD/DVD or USB flash drive. As free and open source software, distributed under the GPL, it will always be available free. Since it has more functions than CampTune, it may be harder for folks who are not as experienced with partitioning hard drives. http://gparted.sourceforge.net/
iPartition
Coriolis Systems' iPartition is a £29.95 ($44.95 US) utility that runs in Mac OS X and allows resizing of all of the relevant partition formats, including HFS+, FAT32, and NTFS. It provides a Mac-oriented user interface that may be easier to manage than some of the free utilities. As it is not capable of resizing the boot disk, it requires a bootable external disk or a boot DVD. (A tool to create a boot DVD is included.)
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section
Native OS utilities
MR user Kazyua reports that you can use the disk management utilities provided with the current operating systems if you want to do it manually. Windows 7 and OS X both have partition resizing functions built in. In OS X, open Disk Utility and manually shrink the mac HFS+ partition by dragging the lower right corner. Then in windows go to the start menu and type "disk management" into the search box then hit enter. You should get an overview of the drives you have and the individual partitions. Right-clicking on the partition gives an "Extend Volume" option. The Windows NTFS volume should then be extended into the free space you created with Disk Utility. This method has not worked for other users, so try at your own risk.
Resizing under VMWare Fusion
If you are looking to allocate more space to Windows under VMWare please refer to the following thread http://forums.macrumors.com/showthread.php?t=828182
From http://guides.macrumors.com/Extend/Resize_Boot_Camp_Partition
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090 -
Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(
If you got the question mark and you do not see any partition to install OS X to, it is not good.
Close the OS X installer by pressing the red button at the top left corner of the Install OS X window, and open Disk Utility. Then, look at the left sidebar and tell me if you see your hard drive. You should see something like this:
Do not worry if you do not see Macintosh HD or if the option with an arrow shows a different name. This is normal.
If you see it, choose it, go to the Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. You will lose everything if you do not have a backup.
If you do not see the drive, it is damaged and it has to be replaced. You can replace the hard drive of a MacBook Pro without voiding the warranty, and any 2'5" SATA hard drive is valid. If you are not an experienced user or you do not want to go inside the MacBook, take it to an Apple Store or reseller. -
I just got my new nokia 5800 and i need some help as i am having trouble adding yahoo mail to my phone and how can i delete the email accounts i got wrong,as i can't see a place to do it either.
Also what is IM and can you add google chat/yahoo messenger and msn messenger?..if you can find where the files are then.
you can click on them or you can right click and go to the option "open with" and select itunes (or if its not in the list then go to "choose program..." and find itunes along that list. unfortunately i have no files to test that with an hand, so there might be another way. -
guyz i need your help i forgot my answers to my security questions and i dont know what to do pls. help me i really need help and my account has been locked for 8 hours. any ideas on how can i reset my security questions pls reply thanks
Disable any security software on the computer and restore the device again.
If the device has been hacked or jailbroken it may not be possible to restore and activate the device.
No support can be provided here for hacked or jailbroken phones. -
I've downloaded Wireshark 1.0.7 and I have x11SDK.pkg
I have a power PC i-mac with os x 10.4.11
When I try to open wireshark, it prompts me to locate "X11", I navigate to the above package but it's greyed out and I can't choose it, I've double-clicked and ran through the install wizard but still can't choose it when asked upon opening wireshark.
I downloaded x11user.pkg from apple but my MAC wouldn't allow me to install it because of 'newer' software already there (I'm assuming that's the SDK.pkg).
So I can't run Wireshark - I've tried deleting & re-installing everything but no luck.
Can someone please shed some light on getting this s/w to work - I need this to run for a college assignment and just cannot progress. I've tried the net for help but nothing is clear enough to me - I don't have a great knowledge of my mac but I'm not illiterate either, just need some help
Thanks!!!
Message was edited by: keimaekeimae wrote:
should I only see 'X11' or 'X11.something' ?
X11 ...if you do not have 'Show All File Extensions' enabled in Finder Preferences.
X11.app ...if you have 'Show All File Extensions' enabled in Finder Preferences.
You might want to create another user - 'tester' - on the box and then download X11 and see if it will install there. Then try Wireshark 1.0.6.
Good luck. -
Need some help with a Macally enclosure and a spare internal drive
Need some help with a Macally enclousure
Posted: Oct 1, 2010 10:55 AM
Reply Email
Aloha:
I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
Any suggestions?
Dan PageHi-
Drivers aren't typically needed for external enclosures.
Macally has none listed for that enclosure.
The same is true for the WD drive, internal or external; no drivers.
With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
How is the external connected?
Have you tried different cables, different ports?
Bad/damaged cables are fairly common.
Have you verified connections inside of the enclosure? -
Purchased a non-working iphone 4 and am in need of help
Okay, so I purchased a non-working iphone 4 off of ebay, because sadly that was the only way I could afford one. Anyway, I began breaking it down piece by piece last night so that I might be able to narrow down what was wrong with it. And that is where I need the help of the apple community. I have cleaned all the contact metal on the inner part of the iphone, cleaned the logic board, the charging port. The person I bought it from said that it would randomly restart while charging, and once you unplugged it from charging, it would shut off. So far, I have not even been able to get it to charge at all, and therefore, no random restarting either. I was able to get it to come back on after I had cleaned everything off and put it back together, even tried to restore it through itunes, but it got stuck on the apple logo, and brought up two different errors on two different occasions, 1603 and 21. I am relieved that there is nothing wrong with the lcd screen or the digitizer, as I know those are expensive. I already have a new battery ordered for it that should be here tomorrow along with a charging port as well because the previous owner said it could probably use a battery, and I just went ahead and ordered the charging port just in case there might be something wrong with it as well. My question is, is it possible that the logic board could be bad in my iphone, and could that be also causing my iphone not to charge, or restore to ios 6.1.3? All help is appreciated. Thanks.
James ArdenIs it possible? Yes. Very much so.
The iPhone is not user serviceable. Apple does not sell iPhone parts. Apple won't touch it now that its been opened. Try checking ifixit.com for help. There's not much we can tell you. -
Animation problem ( badly needs) ?
Hello,
Sorry i 'm posting again and again. because nobody couldn't respond . I badly need this application to be run. Here is what am doing. First applet should start and display '+'( by painting) after keypressed(eg spacebar) then sleep for a while and paint rectangles and next arrow then sleep and etc . this goes on until i keypressed again. Here is that i wrote code , could u please check and modify it. Where i stucked is that KeyPressed code is not working. Please see the code modify it wherever is necessary.
Thanks in advance,
- Balaji
import java.awt.*;
import java.awt.event.*;
import java.applet.Applet;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Color;
import java.awt.Rectangle;
import java.awt.GradientPaint;
import java.awt.geom.GeneralPath;
import java.awt.Polygon;
//<applet code="ExptA4.class" width=300 height=300></applet>
public class ExptA4 extends Applet implements Runnable {
Thread animator;
Dimension appSize;
boolean frozen = false;
int appWidth = 1000, appHeight = 800;
int delay = 500;
java.awt.geom.Ellipse2D.Double circle;
public void init(){
appSize = new Dimension(appWidth,appHeight);
this.setSize(appSize);
addKeyListener(new KeyAdapter(){
public void keyPressed(KeyEvent e){
ExptA4 exptA4 = (ExptA4) e.getSource();
if (e.getKeyCode() == KeyEvent.VK_SPACE)
System.out.println("in the keypressed method ");
}// end of if
} // end of keyPressed method
} // end of init
public void start(){
if(frozen)
{ // do nothing
else
if(animator == null) {
animator = new Thread(this);
animator.start();
} // end of else
requestFocus();
} // end of start
public void stop(){
// stop the animation thread
animator = null ;
} // end of stop
public void run(){
Thread.currentThread().setPriority(Thread.MIN_PRIORITY);
while(Thread.currentThread() == animator)
repaint();
try {
Thread.sleep(5400);
} catch (InterruptedException e) {
break;
} // end of run
public void paint(Graphics g){
Graphics2D g2 = (Graphics2D)g;
Rectangle leftRect,rightRect,plus_horz,plus_vert;
Polygon downArrow = new Polygon();
// drawing the plus
int xHPoint = 440,yHPoint = 350, widthP = 30, heightP = 30;
plus_horz = new Rectangle(xHPoint,yHPoint,widthP,heightP-27);
plus_vert = new Rectangle(xHPoint+10,yHPoint-10,widthP-17,heightP-10);
// black interior
g2.setColor(Color.black);
g2.fill(plus_horz);
// black border
g2.setColor(Color.black);
g2.draw(plus_horz);
// black interior
g2.setColor(Color.black);
g2.fill(plus_vert);
// black border
g2.setColor(Color.black);
g2.draw(plus_vert);
try{
Thread.sleep(4000);
} catch (InterruptedException ie)
// drawing the Rectangle
leftRect = new Rectangle(300,300,100,100);
rightRect = new Rectangle(500,300,100,100);
// white interior
g2.setColor(Color.white);
g2.fill(leftRect);
// black border
g2.setColor(Color.black);
g2.draw(leftRect);
// white interior
g2.setColor(Color.white);
g2.fill(rightRect);
// black border
g2.setColor(Color.black);
g2.draw(rightRect);
try{
Thread.sleep(4000);
} catch (InterruptedException ie)
// drawing downArrow
int xPointA = 340,yPointA = 340, widthA = 30, heightA = 30;
downArrow.addPoint(xPointA,yPointA);
downArrow.addPoint(xPointA+25,yPointA-25);
downArrow.addPoint(xPointA+13,yPointA-25);
downArrow.addPoint(xPointA+13,yPointA-75);
downArrow.addPoint(xPointA-13,yPointA-75);
downArrow.addPoint(xPointA-13,yPointA-25);
downArrow.addPoint(xPointA-25,yPointA-25);
g2.setColor(Color.white);
g2.fill(downArrow);
// black border
g2.setColor(Color.black);
g2.draw(downArrow);
try{
Thread.sleep(4000);
} catch (InterruptedException ie)
// drawing circle
int xPoint = 340,yPoint = 340, width = 30, height = 30;
circle = new java.awt.geom.Ellipse2D.Double(xPoint,yPoint,width,height);
// black interior
g2.setColor(Color.black);
g2.fill(circle);
// black border
g2.setColor(Color.black);
g2.draw(circle);
try{
Thread.sleep(4000);
} catch (InterruptedException ie)
} // end of paint method
}hi ,
here is modified code . I kept all sleep methods in the run method.
But the problem is i couldn't get any response from the keyboard.
What i need is that whenever key presses then animation should starts.
please help me in this regard.i 'm putting my code here, please modify
it according to my requirements. Once again i badly need this one to be run. i really appreciate if anyone help in this one.
Thanks,
-balaji
import java.awt.*;
import java.awt.event.*;
import java.applet.Applet;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Color;
import java.awt.Rectangle;
import java.awt.GradientPaint;
import java.awt.geom.GeneralPath;
import java.awt.Polygon;
//<applet code="ExptA5.class" width=300 height=300></applet>
public class ExptA5 extends Applet implements Runnable,KeyListener {
Thread animator;
Dimension appSize;
boolean frozen = false;
int appWidth = 1000, appHeight = 800;
int delay = 500;
// drawing circle and arrow.
DrawCircle circle = new DrawCircle();
DrawArrow downArrow = new DrawArrow();
public void init(){
// setting dimension for applet
appSize = new Dimension(appWidth,appHeight);
this.setSize(appSize);
// adding key listener
addKeyListener(this);
} // end of init
// to activate keys
public void keyPressed(KeyEvent e ){
System.out.println("in the keypressed method ");
ExptA5 exptA5 = (ExptA5) e.getSource();
// when space bar presses then start the thread and animation starts
if( e.getKeyCode() == KeyEvent.VK_SPACE)
if ( Thread.currentThread() == animator)
exptA5.animator.start();
} // end of if
} // end of keyPressed
// other key methods
public void keyTyped(KeyEvent e){}
public void keyReleased(KeyEvent e){}
// applet starts and animation starts .
public void start(){
if(frozen)
{ // do nothing
else
if(animator == null) {
animator = new Thread(this);
animator.start();
} // end of else
} // end of start
public void stop(){
// stop the animation thread
animator = null ;
} // end of stop
public void run(){
Thread.currentThread().setPriority(Thread.MIN_PRIORITY);
while(Thread.currentThread() == animator)
try {
Graphics g = getGraphics();
Graphics2D g2 = (Graphics2D)g;
// drawing arrow which is calling from other class
downArrow.drawPoly(g2);
// sleeps for a while
Thread.sleep(5400);
// drawing circle which is calling from other class
circle.drawCircle(g2);
// sleeps for a while
Thread.sleep(5400);
repaint();
} catch (InterruptedException e) {
break;
} // end of run
public void paint(Graphics g){
} // end of paint method
// drawing circle
public class DrawCircle{
java.awt.geom.Ellipse2D.Double circle;
public void drawCircle(Graphics2D g2)
int xPoint = 340,yPoint = 340, width = 30, height = 30;
circle = new java.awt.geom.Ellipse2D.Double(xPoint,yPoint,width,height);
// black interior
g2.setColor(Color.black);
g2.fill(circle);
// black border
g2.setColor(Color.black);
g2.draw(circle);
// drawing Arrow
public class DrawArrow{
Polygon downArrow = new Polygon();
public void drawPoly(Graphics2D g2)
// drawing downArrow
int xPointA = 340,yPointA = 340, widthA = 30, heightA = 30;
downArrow.addPoint(xPointA,yPointA);
downArrow.addPoint(xPointA+25,yPointA-25);
downArrow.addPoint(xPointA+13,yPointA-25);
downArrow.addPoint(xPointA+13,yPointA-75);
downArrow.addPoint(xPointA-13,yPointA-75);
downArrow.addPoint(xPointA-13,yPointA-25);
downArrow.addPoint(xPointA-25,yPointA-25);
g2.setColor(Color.white);
g2.fill(downArrow);
// black border
g2.setColor(Color.black);
g2.draw(downArrow);
}
Maybe you are looking for
-
Why doesn't Adobe Reader XI load when viewing online PDFs?
This is probably a stupid question, but I noticed something odd last night. I have Adobe Reader 9 on my netbook and Adobe Reader XI on my main computer. I had been browsing some online PDF files on my netbook, and in Adobe Reader 9 I get the Reader
-
Can we define cursors from in procedure while using .procedure file?
Hi Team, Can we define cursors from in procedure while using .procedure file? I have a catalog procedure in which am using cursors and it is working fine. But while trying to create the same procedure using .procedure , the validation is failing with
-
FTP_COMMAND in order to get files list at FTP address
Hi all. I want to get a list of files exist at a specific FTP address. For that I'm using FTP_CONNECT (OK) and after I want to execute FTP_COMMAND with parameter command = 'ls' in order to recievce the files list in output table data[]. I keep on get
-
When I logi as a regular user to InfoView, by default the fist page shows me the following: Document List My Favourites My Inbox Information OnDemand Services Help Is it possible to change this so that certain users in a CMC group will go to the InBo
-
Why are embedded Media Player MP3 files playing automatically
I am webmaster for my church website where I post audio sermons using the MS Media Player Plugin. On my XP SP3 computer using Firefox 7 the fifteen audio sermons on the website all start playing automatically when I access the web page. Previous vers