IM Init with new ECC and BI Production start up

Hi Everyone:
We have a new BI and new ECC going live.  There will be a period of downtime in the production ECC box after conversions are done. This will be just prior to golive time.    Is it ok to go ahead and do the 3 inits for IM with ECC to BI before the boxes are up and being used?  We have done this before on another project without any problems but I just need some confirmation for my peace of mind on this.  Thx

Hi,
In r/3 side ok when ever u rcoping from one systme to another for example if u take r/3 production to r/3 quality now the entire system will be copied as like production in r/3
now in bw quality is asconnected to r/3 quality once ur copied the logical system every thing cahnegd in quality r/3 but before copy the system is connected with different logical system.
hence it is better to chnage logical system after copying from production to quality.
now u take BW side,yes what u said is write it is tottlly coping system if u r refereshed the system automatically the production system will be copied in quality all delta process will come to quality
so once u r refreshed teh quality r/3 then it si better to once again replicate the qualty sasyte(after coping productionr/3) the do the copy of bw production to quality.
Thanks & Regards
Sathsih

Similar Messages

  • Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

    Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

    That shows you that iPhoto is working correctly and whatever issue you are having is based in your original library.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • IPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now? Thank you for help!

    iPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now?
    I Don't know if I can turn it of or do I just leave it and take it to service?
    I'd appreciate some advice!

    Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

  • Need help re-synching iPods with new computer and getting iTunes to...

    Need help re-synching iPods with new computer and getting iTunes to recognize our iPods (it doesn't even recognize them when they're plugged in).
    Hubby wiped my harddrive for me, so now I need to get everything back in proper places. I'm using windows XP and installed iTunes once again (I believe it's version 8). I also installed all of my iTunes songs. Now I need to know where to go from here. We have 3 iPods and I need to get them all synched once again. I know how to create different libraries for each of us, but I can't figure out how to get our songs back into our iTunes libraries. When I open iTunes and plug in an iPod, iTunes doesn't even show that an iPod is plugged in.
    What do I do now to get each of our iPods synched with our own libraries?
    TIA
    Brandy

    Thanks Zevoneer. The "Restart ipod service" worked and itunes is now recognizing my ipod! Hooray!
    Okay, now how do I synch all of our ipods with our individual libraries (I don't want all of my kids' songs and vice versa)? We each have hundreds of songs on our ipods that we don't want to lose.
    Thanks again!

  • I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

    I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

    These prices are for the U.S.
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model          Out-of-Warranty Service
    iPhone 5          $229
    iPhone 4S          $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone          $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
    When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above.  This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

  • How can i delete contacts completely so that they don´t mix up with new addresses and groups?

    how can i delete contacts completely so that they don´t mix up with new addresses and groups?
    Alle geänderten Adressen oder Gruppen erscheinen immer wieder bei der Adresseingabe von mails.
    Chaos!

  • Macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger display states "not charging" while attached to charger

    macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger

    rgregoryadams wrote:
    macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger
    You'll want to reset your SMC (System Management Controller). Instructions are simple:
    http://support.apple.com/kb/ht3964

  • My MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further. What to do?

    my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
    What to do?
    Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
    Thanks
    V

    Try this:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • I've switched to a new laptop and need to start all over installing everything

    I've got to find the place to start all over with CC on an already existing account. I've switched to a new laptop and need to start all over installing everything@

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • TS3274 I get on the internet with my Ipad3 and when I start typing in the search box the ipad guess' what I want before I finish typing and goes to the internet. How do I fix that?

    I get on the internet with my Ipad2 and when I start typing in the search box the ipad guess' what I want before I finish typing and goes to the internet. How do I fix that?

    Yes if you purchase the tethering data plan for your iPhone. See:
    iPhone: System requirements for Personal Hotspot

  • HT1365 I have a new iMAC and when I start it up, the wifi connects fine, but when I wake the computer up, I have to manually select my wifi. Any suggestions about how to avoid this?

    I have a new MAC and when I start it up, the wifi connects ok, but when I wake it up, I have to manually connect it to my wifi, any suggestions?

    Take it to Apple and purchase an out of warranty replacement for it.
    Replacement is the only way to fix broken electronics.
    Allan

  • Source for Init with data transfer and full load

    Hi Experts,
    1. Please tell me where the data comes when we do the
        following actions :-
        a) Init with data transfer
        b) Full load
      i want to know the source of data i.e (setup table or main table or any other table)
    Helpful if you can provide the data-flow.
    kindly tell which is prefrable and why?
    Regards,
    RG

    Hi.......
    When you do init with data transfer it will read data from the set up table only..........but beside this it will also set the init flag..........due to this from next time any new records will go to the delta queue...........and next time when you run delta load it will pick records from delta queue...........
    Now suppose data are alrady available in the BW side...........then you can run init without data transfer.......this will only set the init flag.........it will not pick any records.........
    Extraction structure gets data from set up table in case of full upload ............and in case of delta load from delta queue.......
    Regards,
    Debjani...........
    Edited by: Debjani  Mukherjee on Sep 20, 2008 11:45 AM

  • Steps/RisksConnecting BW  with New ECC 6  while keeping old ECC5 box active

    Hi Friends-
    Right now we have current dataflow from ECC 5 to BW 7.0 for differnet countries .Now i  have a situation where i have new ecc 6.0 box. and I need to move only one country functionality to new Ecc6 box and load data from new box to current BW box. So what are the pain ponts/Risks in doing this. My concern is all about master data, Can anyone suggest the best methodology to do this without effecting current dataflow or overwriting objects.
    Regards,
    Mark

    Hello Mark,
    Does your master data overlap and you can't easily make it unique from the individual source systems? If not you could compound with 0SOURCSYSTEM as described in the SAP note  184948.
    Best Regards,
    Des

  • Diff between init with data transfer and repair full request

    hi,
    i have observed that even in the new flow we are doing init without data transfer and then repair full request
    if i do init with data transfer also i can achieve the same?
    i want to know why we need to do this ,do we have any advantage of doing init without transfer and repair full request?
    please suggest me

    Hi Venkat,
    A repair full request is loaded in cases where you get erroneous records or where there are missing records which you want to load. In such cases, a repair full request for the selective records can be loaded and is the most efficient way to correct the data, since you won't be required to load the entire data once again. Also you acheive the desired result without disturbing the delta. (You are not required to do an init w/o data transfer after a repair full, people just do it a a precaution)
    However, repair full requests should only be loaded to infoproviders with update mode 'overwrite'. Otherwise, if the InfoProvider, its very probable that you might double the value of the key-figures due to rows being added twice - in case of an InfoProvider with update mode 'Additive'. So, if your InfoProvider is additive, you will need to delete the entire data and do an 'init with data transfer' to avoid corrupting the data. (Note: you can do a repair full request for an additive infoprovider in case of lost records or if you can delete erroneous records with selective deletion.But you have to be careful with the selections lest you inadvertently load other records than required and corrupt the data)

  • Problems with new iMac and Adobe Creative Suite 2

    Just wondering if anyone can help me out. I am a Graphic Design student and just bought Adobe Creative Suite2. I installed it on my new iMac, and it wouldn't open InDesign or Photoshop although I had no problems with Acrobat and Illustrator. A pop-up window stated that the program "unexpectedly quit". I have uninstalled and reinstalled three times and was on hold with Adobe Tech Support for three hours until I finally gave up. If anyone knows what's going on I would appreciate it!

    I dragged the installer from the install disk to my desktop and was more successful in installing problem CS2 apps. Make sure to update everything as well. Some times it takes a restart to get the finickiness out of PS.

Maybe you are looking for