IM (Inventory material) is failing in ECC 6.0 upgrade from SAP R/3 4.7

Hello,
We are working on Technical upgrade project (SAP R/3 4.7 to ECC 6.0 EHP 6) for one of our Client.
when we are trying to create a purchase order (ME21N) in upgraded system (ECC 6.0), the field  IM Material is failing to accept the internal material values from MATNR field. After entering the IM material, the value immediately got disappeared and it needs some workaround to get the material back in to the IM field along with MPN material.
It was working fine (accepting Internal material) in R/3 4.7, if we give a valid internal material, it immediately get copies to the field IM Material.
In case of ECC 6.0, it is completely failing.
Please suggest if you have come across any solution?
Regards
Rifaie

Hi Selvan,
Go through document in below thread,you will get more info on upgrade
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/sapERP6.0+Upgrade%2520%2520SAP%2520ERP%25206.0%2520Upgrade
Faq's on SAP upgrade in below link,
SAP ERP 6.0 Upgrade
Thanks Regards,
Syfulla

Similar Messages

  • Is it possible for XI 2.0 to connect to ECC 6.0 upgraded from SAP R/3 4.6?

    Hi,
    I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
    If yes, could you forward some links so as to know how.
    Thanks,
    Fariha

    hi,
    >>>>Is that Possible..?
    yes
    >>>Wont there be any additional configuration needed ?
    if you use IDOCs then you don't need anything special
    Regards,
    michal

  • Webgui service fails in ECC 6/0 upgraded from ECC 5.0.

    Our webgui service worked fine in our ECC. 5.0 system, however after the upgrade to ECC 6.0, the WebGui service fails. Has anyone experienced this?  I've found other threads that said to change the WebGui service parameters, however, I'm not sure what the correct parameters are since the one's I have are from a ECC.5.0 system and not from and ECC 6.0 system.

    Problem resolved...you need to publish the service "SYSTEM" and "WEBGUI" in se80 after a SP upgrade.

  • My Imac fails when I try to upgrade from Snow Leopard 10.6.8.  I have to boot up from disk.  Does anyone know how to overcome this problem?

    My iMac fails when I try to upgrade from Snow Leopard 10.6.8.  I have to boot up from disk.  Does anyone know how to overcome this problem?   I need to upgrade in order to install latest software.

    It would be lovely to know what your talking about. Upgrading from Snow Leopard does not involve discs.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
                 Identifier 5,1 or later.
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
             7. Xserve (Early 2009) - Model Identifier 3,1 or later.
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite- System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • Screens not working in ECC 6 after upgradation from 4.6c.

    Hi,
    The custom developed screens which where developed in 4.6c version is not working properly in ECC 6 after upgradation.Do i have to make any more changes for this .? If anyone have an idea please help me in this issue.The custom developed things are an extended functionality we have done to r/3.
    Regards,
    jinesh kumar c.

    Hi,
    Check the Transportatation Logs in STMS for the programs/screens and check whether they are successfully tranported or not?
    Because some times we get Dynpro errors for transportation of the screens.
    Reward if useful.
    regards,
    Anji

  • Upgrading from SAP R/3 4.7 x200 to SAP ECC 6

    Our company is planning to upgrade R/3 4.7 EXT 200 to ECC 6.0. We are planning to do the Unicode upgrade on the R/3 4.7 system then do the ECC 6.0 upgrade. Would this be an appropriate way to go about the upgrade? Has anyone done the Upgrade in this fashion, and have you experienced any big problems?

    Hi,
    as per my knowledge no need to do the uccheck in 4.7,in upgrade we r doing the uccheck in ecc6.0.
    Upgrade means we r installing the new software.
    The major stages of a technical upgrade can be
    1.System preparation and stack level patch upgrade u2013 Basis Team
    2.SPDD Phase u2013 ABAP and Functionals
    3.Up gradation of the system u2013 Basis Team
    4.SPAU Phase u2013 ABAP and Functionals
    5.DBACOCKPIT for indexing u2013 ABAP TEAM
    6.Issue resolution and error tracking u2013 ABAP and Functionals
    7.Z programs corrections u2013 obsolete function modules and objects
    Regards,
    Madhu

  • Upgrade from SAP R/3 4.7 to SAP ECC 6.0 with PSCD and TFA

    Hello!
    I have to upgrade an SAP R/3 4.7 to SAP ECC 6.0.
    We have SAP FI/CO, PSM, IM, FI-AA, PS, with PSCD (FI-CA) as well the special taxes component TFA.
    Is there some special procedures for the the Upgrade with this components (PSCD and TFA)?
    Is there some documentation for the special Uograde procedure as well the normal procedure?
    We use Windows with Oracle.
    Can some one

    PSCD is in ERP a Business function set - see 957295 - PSCD: Renaming PUBLIC_SERVICES business function set, the upgrade should automatically take care that activation.
    Is TFA the tax extension for Ireland? If yes, then the same should be true here.
    Markus

  • Upgrade from SAP R/3 Enterprise 4.70 to ECC 6.0

    Hi experts,
    I am currently trying to build some knowledge for my final project. (Working as an apprentice in computer science atm)
    Main goal of the project is to upgrade our dev system to ECC 6.0.
    As far as I understand it, ECC 6.0 ONLY works with NetWeaver 7.0. Do I need to upgrade to NW7 before I upgrade to ECC 6.0 or is there a all-in-one package, which upgrades both at once?
    I browsed through a few upgrade guides but didn't really find an explaination I could understand...
    Could someone describe the basic steps for such an upgrade? (Like: Copy System - Upgrade NW - Install Components....)
    Kinda desperate
    Thanks in advance!
    Sandro Bollschweiler
    P.s.: I hope I used the right Forum for my question...

    Hi,
    When you upgrade to SAP ERP 6.0 (ECC 6.0), the underlying technology within the SAP R/3 4.7 system is automatically upgraded to the SAP NetWeaver 7.0 version. It is one upgrade;
    SAP R/3 4.7   -
    > upgrade -
    >  SAP ERP 6.0
    SAP Web AS -
    >  SAP NetWeaver 7.0
    The upgrade guides are you best place for information. The SAP ERP 6.0 has the steps to follow and all requirements.
    For installations, please see the aptly named installation guide title "Master guide - SAP ERP 6.0". Both the upgrade and installation guides are available at service.sap.com/instguides.
    For system copy info, see the SDN page: System Copy and Migration
    There is some demo examples here too
    All the best,
    Mike.

  • Upgrade from SAP R/3 4.6C to SAP ECC 6.0

    Dear All,
    Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
    I have already checked the SAP Marketplace (Product Availability Matrix) and found that SAP R/3 4.6C first needs to be upgraded to mySAP ERP 2004 (SAP ECC 5.0) and then from SAP ECC 5.0 to SAP ECC 6.0.
    My first question is whether I am on the right track.
    Secondly, I was going through various SAP Upgrade strategies and curious to know the difference between technical upgrade and functional upgrade.
    Please correct me if I am wrong - technical upgrade is when you technically upgrading the SAP ECC release from 4.6C to 5.0 (that is, upgrading Operating System, Database and ECC).
    Once it has been completed, business processes (functional modules) need to be remapped. The development needs to be reworked upon (Modification Adjustment). This is what is known as functional upgrade.
    I would appreciate if someone throws some light on my understanding on this subject.
    Regards.
    Wolfgang.

    > Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
    Oh.. you're aware of the fact, that Oracle 8 as well as Solaris 8 is out of support?
    I would do it like (if you need/want to stay on the same hardware):
    - upgrade Oracle 8 (I hope your run 8.1.7.4) to Oracle 9.2.0.8
    - upgrade Solaris 8 to Solaris 10
    - upgrade Oracle 9.2.0.8 to Oracle 10.2.0.4 + latest interim patches
    - use kernel 46D_EX2
    - upgrade the 4.6c to ERP 6.0
    Be aware, that, if you plan to use Java applications (such as the Enterprise Portal or other Netweaer related appliation), the ERP 6.0 must be converted to Unicode.
    Markus

  • Upgrading from SAP R/3 4.6D to ECC 6.  Config. To be takencare.

    Hi All,
       We are configuring for Depot Sale for our Client in Sap 4.6D. As they are updating from SAP R/3 4.6D to SAP ECC 6.00. I like to know what the things to be taken care are.
    While configuring for Depot Sale in Sap 4.6D. We have updated the patches & OSS Notes. We need to transport that also.
    Please let us know at the earliest.
    Thanks in Advance,
    Sapuser

    Hi
    Yes you need to transport the applied notes & Patches also if they are not avaialble in ECC 6.0
    Thanks & REgards
    Kishore

  • Upgrading from SAP R/3 4.6D to SAP ECC 6.  Config. To be taken

    Hi All,
       We are configuring for Depot Sale for our Client in Sap 4.6D. As they are updating from SAP R/3 4.6D to SAP ECC 6.00. I like to know what the things to be taken care are.
    While configuring for Depot Sale in Sap 4.6D. We have updated the patches & OSS Notes. We need to transport that also.
    Please let us know at the earliest.
    Thanks in Advance,
    Sapuser

    Hi,
           Insted of doing in 4.6D do it in 6.
    RV

  • Hardware requariment for ECC 6.0 upgrade from ECC 5.0

    Hello
    I am on ECC 5.0 with oracle 9.2.0.7.I need to upgrade this to ECC 6.0.
    I have already implemented MM,PP,FICO,QM and HCM.My current data base size is 900GB.This has 30GB monthly growth.
    With this ECC 6.0 upgrade i am planing to implement PM,EP.
    I know converting none Unicode system to unicode system is required some more hardware resources than the none Unicode.
    Some document says 40-60% more disk space and 35% more processing speed from current system.
    Can any one give me the correct information about the hardware requirement for ECC 5.0 to ECC 6.0 upgrade.
    Thanks
    Roshantha

    Check with the Links
    https://websmp102.sap-ag.de/sizing
    https://websmp208.sap-ag.de/quicksizer
    http://www.4soi.de/
    http://www.easymarketplace.de/
    Kanagaraja L

  • Impact on BI after ECC 6.0 Upgrade from Ehp 3 to Ehp 4

    Hi All,
    We are planning for an upgrade of our ECC 6.0 System from Ehp 3 to Ehp 4.
    Could you please provide me inputs in what needs to considered in terms of BI system?
    I know the following thing:
    1) Delta Queues must be cleared before the upgrade starts but what needs to be considered for FI and CO Data Sources.
    Any SAP Documentation available?
    Thanks,
    Neelesh

    What version of BI is yours...3.5 or 7.0???
    Unless the ehp4 is bringing some functional changes to FI or other functional datasources which needs to be replicated on to the BI side.
    i think the below link might help.
    Technical news brought with EHP3 and EHP4 compared to ECC6
    Thanks
    Deepak

  • ECC 6.0 Upgrade from 4.7 - EDI Interfaces

    Hi Gurus,
    Need your inputs on what are the precautions to be taken during ECC 6.0 Upgrade related to EDI Interfaces.  with SAP upgrading from 4.7 to ECC 6.0, do you see any precautions need to be taken considering the middle ware involvement.  Also, is there any changes in IDOC Structures in ECC 6.0 which my cause issues related mapping with middleware.
    Please suggest.
    Thanks & Regards,
    C.L. Narasimhan "CLN"

    Hi,
    generally, a release upgrade, delivers new idoc/message types or new releases of existing idoc/message types.
    So, taking this in mind, you shouldn't have problems for the mapping of the messages, because the versions of the basic idoc, once released, cannot be changed.
    You might have some application problems related to the inbound interfaces, but this is part of the game...the testing phase will highlight whether the problem exists.
    A known problem is that the upgrade removes all the customer specific entries in the system table EDIFCT.
    Further details are provided in the OSS note [https://service.sap.com/sap/support/notes/865142]
    Regards,
    Andrea

  • ECC 6.0 Upgrade from R/3 4.6B - Obsolete ABAP Language

    Hello all,
    I am part of a team that is performing an upgrade to ECC 6.0 from R/3 4.6B. I was wondering if all of the reports, FM, etc. that were developed under "old" ABAP will have to be modified in order to comply with the  <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca">Obsolete ABAP Language Constructs</a>.
    If the code still works after the upgrade is it necessary to perform all these modifications?
    Thank you very much in advance,
    Best Regards,
    Ezequiel

    I would say that is is not necessary.  From the second paragraph of your link:
    "Although you are generally not forced to modify your existing programs to represent these changes, it would be a very good practice to implement these rules and constructs with any new code development and coding samples."

Maybe you are looking for