Im looking evaulation hardware to get trained in interfacin​g with labview. kindly suggest

Im looking for any Hardware (NI or third party Hardware) in which i can get trained with interfacing with hardware with different communication techniques like Can, I2c, as well 232 and 485.. and Few DAQ interface... So kindly let me know any such hardware from any vendor is available.. Kindly suggest.

The best place to start would probably be the NI LabVIEW Basics 1 & 2 courses.  They cover some of these concepts.  You can find out more at http://www.ni.com/training.  Other wise if you search the knowledge base on the NI Developer Zone you can find tutorials for lots of hardware bus interfaces, like this one on the CAN bus.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

Similar Messages

  • How do I get HPE2078A HPIB to work with labview 6.1?

    I will appologze in advance but I'm totally new to everything here, never dealt with HPIB or NI interface before in my life. The computer I have has a Agilent 82350 card and it appears to be installed correctly. I'm not sure if I need a new driver or what, but I can't get MAX to find this card. Any help to get started would be much appreciated.
    Thanks
    Tim

    MAX will only detect NI hardware. I think you will probably need to acquire drivers or a dll file from Agilent, then use LabView to make calls to the dll via ActiveX or .Net
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • Looking for software driver for HP 6655A Power Supply with Labview 5.1

    Hi, trying to control an HP 6655a Power Supply but the version of Labview in the PC is the old Labview 5.1.
    I don't want to upgrade it for fear that the program will no longer function. Does anyone have the driver for the HP6655a that will work with labview 5.1?

    Hi demo,
    Try the drivers directly from Agilent.
    Here is a couple of links:
    http://we.home.agilent.com/cgi-bin/bvpub/agilent/editorial/cp_MiscEditorial.jsp?OID=536913992&NAV_ID=-536891584.536882066.03&LANGUAGE_CODE=eng&COUNTRY_CODE=ZZ
    Click on> Driver: 665xA Series Instrument Drivers
    Maybe this one is better... it's older...
    http://we.home.agilent.com/cgi-bin/bvpub/agilent/editorial/cp_MiscEditorial.jsp?OID=536917365&NAV_ID=-536891585.536880265.03&LANGUAGE_CODE=eng&COUNTRY_CODE=ZZ
    Click On > Driver: DC Power Supply Instrument Driver (1.13 MB)
    You may have to import the instrument driver after you install the libraries. This is done by selecting from the pull down menu:
    Tools > Instrumentation > Import CVI Instrument Driver
    JLV

  • Getting trained in HANA and job possibilities

    Hi,
    I'm planning to get trained in SAP HANA with a focus to getting certified afterwards.
    I do not have any work experience in HANA. I have less than two years of experience in SAP BI and Business Objects.
    I would like to know the job possibilities in India for a person like after getting trained in HANA. Is it a good decision to take a course in HANA?
    Thank you

    Hi Suriya,
    Yes HANA is a new innovation and good technology. It all depends where are you looking for job in INDIA. With an Add on experience of SAP BI will help you to focus / understand HANA more.
    Regards,
    Deepanshu Sharma

  • Which Functional module to get trained on

    Dear SAP experts,
    I am currently looking in SAP career. I have masters in biotechnology/ biology .From last four years I am working in cosmetic / Pharma company in quality assurance. I want to be functional SAP consultant but don not know which module should I get trained on  considering  my education and experience.
    I  am new to SAP and SCN . Any help from you would be greatly appreciated .
    Thanks

    Hi Saima,
    There are two ways:
    1. Check with SAP whether you can do IS-Pharma and SAP Help link to understand what is this SAP Best Practices for Pharmaceuticals – SAP Help Portal Page
    This will be an added advantage and you already know the process of pharmaceutical and life science.
    2. As you have already worked in Quality Assurance department, SAP Testing or SAP Test Manager jobs also suits you.  But if you keen to join as Functional Consultant then check SAP MM / QM modules.
    Regards
    GGOPII

  • Where can I found hardware to get analog signal from VCR and work with labview and then sample this signal in very high frequency?

    I am trying to build a Digital Video Recorder using Labview. The problem is that I found that Labview sample the signal in the order of milisecond. I wanted it to be in the order of microseconds. Also I am looking for a cheap Hardware solution if it is possible

    Your question does not make a lot of sense to me, so I will just point out a few things.
    1. The PCI-1411 works well with VCR signals. It has a BNC connector as well as a S-Video connector. The price is under $1000, so it is fairly reasonable. The amount of time you save getting it to work with LabVIEW is worth any extra cost.
    2. The PCI-1411 is sampling three colors at 30 frames per second, with an image resolution of 640x480. This is the best resolution you are likely to get from a VCR signal. The sampling rate for each byte in the image is about 28 MB/sec. This is in the microsecond range that you are looking for, I think. If you are only interested in the raw signal instead of the image, you could look at the high speed digitizing boards NI sell
    s that acquire at higher rates.
    If this information isn't really what you were looking for, perhaps you could clarify your question.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • TS4212 can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.  I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work

    can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.   what do I do
    I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work.
    I am really struggling

    Thanks
    someone named  Eloisa   she gave me   a phone no.   or visit hp.com/uk
    cannot make head nor tale of it all.  I am old.  and find everything hard to undertstand

  • HT4623 I'm trying to update my ipod iOS...when it says to go into "Settings/General/Software Update", I don't have a "Software Update" option in my General category.  Is there somewhere else I need to look in order to get iOS updates?

    I'm trying to update my ipod iOS...when it says to go into "Settings/General/Software Update", I don't have a "Software Update" option in my General category.  Is there somewhere else I need to look in order to get iOS updates?

    Updating from the ipod itself is a feature of ios 5 or later.
    You would need to update as always.  Turn on computer, open itunes, connect ipod.
    The first gen ipod will only go to 3.1.3

  • Dumb thing I ever done is upgrade my ipad 2 to ios6, guys don not upgrade ios6 in your ipad2 now I am looking way back to get back to ios5.

    dumb thing I ever done is upgrade my ipad 2 to ios6, guys don not upgrade ios6 in your ipad2 now I am looking way back to get back to ios5.

    Downgrading the iOS is not supported

  • There's a problem i find it when i get Training in oracle Applicaltion 12

    When i get Training In how to setup GL , & after i make a new GL , then i create new user and added this new GL In this new user , approximately after this step - I find a problem as a follow ,
    before the problem : Setup - Financial - Flexfield - Key - ( Segment - or Values )
    After the problem : Setup - Financial - Flexfield - Key - ( Accounts )
    you notice that i can't find segment or value
    If there's any solution Pls. reply me because this problem appear for me from 2 weeks
    reference : www.solutionbeacon.com --- this site i trained on it
    Thanks for all

    We can't know. You have not told us what error there actually is nor provided any proper system information or other technical details.
    Mylenium

  • I got a new mac.. Want to tranfer from my old one.. I'm at the part where it says tranfer info to this mac... It just keeps looking for source! Getting irritated!

    I got a new mac.. Want to tranfer from my old one.. I'm at the part where it says tranfer info to this mac... It just keeps looking for source! Getting irritated!

    Have you tried Migration Assistant?
    http://support.apple.com/kb/HT4889
    This also works for Mavericks.

  • Ordered iPhone 5S on 12th October, when does it look like i'll get it?

    Ordered iPhone 5S on 12th October, when does it look like i'll get it?

    I also ordered my phone on the 12th.  (Apple web site, gold, 32 GB)  The status changed to "Preparing for Shipment" on Saturday, the 26th.  The UPS website indicated it is currently hanging out in Korea but they estimate delivery on 11/1.  I hope yours arrives quickly! 

  • HT204453 where do I go to get training on 9L0-012 ACMT 2015 exam or 9L0-E07

    where do I go to get training on 9L0-012 ACMT 2015 exam or 9L0-E07
    iOS Qualification Exam 2015 training.

    https://aatcportal.apple.com/AATCWeb/locations
    http://support.apple.com/en-us/HT202594
    I have other questions.  Where can I get them answered?
    You can send your questions to [email protected]

  • I am looking for software that will convert dvd to i tunes format,any suggestion please. I have tried u2anydvdconverter but cannot get it to work

    I am looking for software that wioll convert dvds to I tunes format, any suggestions ? I have u2anydvdconverter but cannot get it to work.

    jr1605 wrote:
    I am looking for software that wioll convert dvds to I tunes format,
    If you mean Commercial DVDs that are Copyright Protected... then that is illegal and Cannot be discussed here.
    Terms of Use

  • Looking for a way to get my Product ID and Vendor ID so I can enable my Radium 49 USB MIDI keyboard to work with Labview 7

    Looking for the Product ID and Vendor ID for my Radium 49 USB MIDI keyboard to work with Labview 7
    Is there a tool to find out the Vendor ID and Product ID for a USB device?
    Example: of what I'm looking for
    The Product ID for National Instruments DAQPad-6020E is 0x12C0. The
    USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093)
    (that is decimal 4243).
    Thanks for all the fast responses this newsgroup RULES!!!!!!!!!!!!

    http://digital.ni.com/public.nsf/allkb/335A90747734097886257070006415B9
    How To Find The Vendor and Product ID for USB Devices?
    Primary Software: Driver Software>>NI-VISA
    Primary Software Version: 3.3.1
    Primary Software Fixed Version: N/A
    Secondary Software: N/A
    Problem:
    I want to make an NI-VISA driver that requires the vendor and product ID?
    Solution:
    There is a utility called USBView,
    free from Windows, attached below, which you can use to view what is
    connected to your computer's USB ports. It is necessary to load this
    program and connect the USB device in development. Upon selecting the
    device in USBView, one can then look on the right side of the
    application window to obtain the Product ID and Vendor ID. This will
    allow you to enter in the correct IDs when creating a driver .inf file
    when using the VISA Driver Development Wizard. For more information
    about how to use the VISA Driver Development Wizard see the related
    links below.
    Note: It is necessary to keep the hexadecimal
    (0x####) format. Do not remove the "0x" hexadecimal format preceding
    the ID number. 

Maybe you are looking for

  • Help Upgrade to Maverick fails - now unable to restore from time machine as well

    Hello, I have an iMac (2008) which was running snow leopard. The App store reminders to upgrade for free to Mavericks got me today and I decided to go with the upgrade. After the down load of the s/w and while rebooting, it prompts for user id and pa

  • Home Button Troubleshooting Question

    Hello Is there a way to see if the home button assembly (screen side), or the home button terminals (battery/case side) to see which is causing my home button not to work? I have one ordered to replace, but I just want to test it out to make sure I a

  • Delete a sheet in a shared Excel

    Hello, Is there any way you can delete a sheet through VBA when the Excel workbook is in shared mode? Sheets(2).Delete Does not seem to work. Nor does ActiveWindow.SelectedSheets.Delete. Sheets("2015-02-19").Delete also causes an error. Is there anot

  • PDF Docuemnt Stream Printing

    Hi all, I'm getting problem while printing PDF stream using javax.print api from Applet. i used following code to print PDF docuement. public void sendPrintRequest() java.io.InputStream fis=null; PrintRequestAttributeSet pras = new HashPrintRequestAt

  • JSP include through a web.xml configuration

    I have a website that has many JSP pages and I would like to add some logging lines to each jsp file. I would prefer not to have to edit each jsp file though (it would be time consuming). Is there a way through a configuration change in the webapp we