Im looking for a sleeve/case for my MBA

right now i want sleeve or a case that i can use to transport my Macbook air. I DO NOT WANT a shell case or those sleeves where you use your macbook in. I want something that has a pocket for wires (lightning wires, thunderbolt wires, Charger). Ive looked at the viper hardcase graphite 13' which is interesting because it can hold other things like my ipad mini and my phone.

I used to use the inCase case for my Air, but I think they are a tad too bulky. I still use it for my 11" though.
For my 13" Air I prefer the Level 8 case shown here. Even though designed for the full-size MacBook, it fits the Air perfectly, and permits just the right amount of extra storage. It is also very airport screening friendly. I also bought it from Apple, so I suppose they like it too. LOL
https://www.level8cases.com/products/13worldcase.php

Similar Messages

I'm looking for a case/bag for the new MacBook Pro with Retina Display - any suggestions?

As the title says, I'm looking for a case or bag for the new MBP w/ Retina Display. I'd prefer either a sleeve or a backpack designed for it - not having any luck finding sleeves that are made for the MBP w/ Retina Display, and I'm thinking the ones for the other 15" MBP will be a little too big. Any suggestions?

Look at these, very cool.
http://www.mac-case.com/

Protective sleeve/case for MacBook?

I'm getting a new MacBook for a client who tends to be rather rough on his equipment; his old iBook's case has a couple of chunks missing (he doesn't know how it happened). So I'm looking for some protection for the MacBook. He'll be carrying it in a backpack, so what's needed is some kind of padded, tough sleeve/case that fits the MacBook itself; no need for pockets for power adapter, etc. Anyone have any suggestions?

When I got my macbook I bought a sleeve off ebay :
http://cgi.ebay.co.uk/Case-Sleeve-Cover-for-Apple-13-3-13-MacBook-UKSTOCKW0QQitemZ140256643863QQcmdZViewItem?hash=item140256643863&_trkparms=72%3A984%7C3 9%3A1%7C66%3A2%7C65%3A12&trksid=p3286.c0.m14.l1318
But it depends really... If this client is careless with the hardware then you can also get outer casing that clips on
http://cgi.ebay.co.uk/RED-HARD-SHELL-CASE-for-13-13-3-Apple-MacBook-LaptopW0QQitemZ380053364640QQcmdZViewItem?hash=item380053364640&_trkparms=72%3A984%7C3 9%3A1%7C66%3A2%7C65%3A12&trksid=p3286.c0.m14.l1318#ebayphotohosting

ZeroShock sleeve case for MacBook Pro is available...

In case anyone is looking for one, the ZeroShock sleeve case fitted for MacBook Pro is available at:
http://shinza.com/productinfo.php?productsid=57
Although the manufacturer is Japanese, the product is apparently in inventory and shipped from their California warehouse.
I have ordered, but not yet received.
Enjoy.

Ya the Biolithic is perfect for that application. I got one while my MBP was in for repairs so it's never been used. It comes with a screen protector, laptop bag, and peripherals bag. I can do $35 ($7 cheaper than if you bought from Biolithic) shipped, let me know if you're interested.
Thanks,
Jacob
[email protected]

Recommendations for sleeve/case for Thinkpad Yoga

Hi,
I am looking for recommendations on a good tight case or sleeve for a Thinkpad Yoga. Any ideas?
Thanks
Jerry

Hi I found this snug fit sleeve on Amazon. If anyone has used this can you please confirm that the Thinkpad Yoga S1 fits perfectly in this. Thanks in advance
http://www.amazon.com/Case-Star-Neoprene-Notebook-Turquoise/dp/B00FGJ8YGW/ref=cm_cd_ql_qh_dp_t

Looking for the best MBPR case.

I was looking at going for a sleeve case and a backpack for my retina macbook pro.
The sleeve I was looking at is the Thule 15" Sleeve however I am worried about the zips and the excess room.
Backpack would be the Incase Compact Backpack with the macbook in the sleeve, which is what I did in the past with my 13.3 macbook pro.

check booq products
I have 2 viper sleeves and use them with/without a booq backpack, I'm very happy with them.
booqbags.com

Looking For Strong Mac Case

Hi,
I have a 13" MacBook Air, Mid 2013.
I am really worried about dropping my MacBook and breaking it. I am looking for a reasonably priced have duty case, like the ones that snap on to it and I have full flexibility of the hinge and that.
Could anyone recommend a good case for my Mac.
Thanks.

Having tried every brand out there, I can honestly say that Booq is one of the best!
http://www.booq.com
I highly recommend their Vyper M3 sleeve too!
Good luck!

Looking for a hard case

I have a 17" MacBook Pro (non-unibody) and I am looking for a good hard case for it. Not something that stays on it, but like a sleeve type thing that will protect the laptop while it's in my bag. It needs to provide protection from dents and would be great if it was padded. However, it cannot add too much bulk (some is OK) so it will still fit in my bag. Any suggestions?

I also highly recommend MacTruck for extensive travel although I don't consider doing so as overkill. I use this when traveling by plane and train. Otherwise, for everyday travel usage I use Speck cover.

Best work-in sleeve/case for MB Pro 15"

Hi my new Macbook Pro just arrived last Thursday and I was wondering what kind of sleeve or case I should get for it. It's the 15" model and I'm looking for a work-in sleeve/case that will also provide some protection against bumps and maybe even drops. I would also like it to have either some unique graphics/colour (like lime green for instance) or be customizable, if possible.
When I did some research I came across the Booq Vyper M3 (found at: http://www.booqbags.com/All-Products/Vyper-hard-laptop-cases/Vyper-M3-macbook-pr o-sleeve) case and I REALLY like the way it looks but unfortunately it's not a work-in sleeve. Anything that looks like that (or is made of ballistic nylon) and has straps inside to hold the laptop would be perfect! Thanks in advance for your replies =]

Huzzk do the cases that you are after
http://www.huzzk.com/Ligero_15.asp
http://www.huzzk.com/Sleevie_Main.asp
I use this one ans it works great
http://www.huzzk.com/huzzksleevie_waveblue.asp
Doesnt get hot at all
Crumpler also do some
http://www.crumplerbags.com
Hope that helps...

What sleeve / case did you get for your X120e?

I'm thinking of getting the Lenovo one made for X100e/X120e. But its design is a lil' ... dull.
Some sleeve makers told me to look into products made for the 11" MacBook Air. Others said no way you're out of luck.
I personally like this unconventional one: http://g-form.com/product/ipad-extreme-sleeve/
But I was told that it wouldn't fit.

Hello,
I am using a Briggs & Reilly Verb Speedy Mini Brief Model # VB401-4 case with my ThinkPad X120e. Mine is the black model with orange accents. This case is actually designed for a slightly larger notebook, however it is well-padded and holds my X120e without causing it slide around inside the case. It also holds the 90W travel adapter and a series USB adapters and cables, SD cards, pens, business cards and other things one might normally keep in a laptop case. It may be a bit larger than what you are looking for, though.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Looking for a particular 1pad2 case

I am looking for a case for the ipad2. the case must protect the ipad2, without covering up ports and camera. the kicker is, it needs to have a shoulder strap attached in order to be worn around the neck.

love the new Vaja case, specially the black and red one. I had it for couple of weeks and it looks amazing.

Looking for a decent high quality case for the Omni10 Omni 10

For anyone looking for the best case for the Omni 10 then this fits perfectly and is the best match for this tablet currently
http://targus.com/uk/product_details.asp?sku=THZ200EU
In the UK, where I live, it is available from John Lewis

It appears that the Targus case has a cutout that would allow you to charge the device with the cover closed. The HP case doesn't allow for that.
I wrote a review here on the HP case. I wouldn't recommend it. I should also note that the HP store personnel chose not to make my review public...seems there's some selective editing going on there which means I will never trust any reviews on that site.
You can search here for my whole review, but basically the HP case has a couple of problems.
1. It's very heavy for a case.
2. The holes don't line up particularly well with things like the camera (no matter how many times you adjust the tablet and tighten loosent the velcro closure.
3. The aforementioned charging issue.
4. You can't have any cables plugged into the device while in Stand mode (probably also an issue with the Targus).

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

I love the Smart Cover. It fits the way I work and I love the instant on/off and the always available screen protection. I wouldn't use my iPad without it.
I got a Cover Buddy for the back, because I wanted the back to be less slippery when I'm using the iPad in the classroom, teaching. I picked this back cover because it's VERY lightweight, easy to get on or off and, protects the corners, has accurate cutouts for the ports, and (in the colors) has a rubberized surface:
http://www.switcheasy.com/products/CoverBuddy/
I have a Built NY "hoody" slip on case with a hard internal shell that I use when I'm in the field and I can put the iPad with the Smart Cover and the Cover Buddy inside this . But for everyday use, the Smart Cover with the Cover Buddy is a terrific combination.

Looking for a simple way to convert a string to title case

New to LiveCycle and Javascript. Looking for a simple way to convert a string to title case, except acronyms. Currently using the the following, it converts acronyms to lower case:
var str = this.rawValue;
var upCase = str.split(" ");
for(i=0; i < upCase.length; i++) {
upCase[i] = upCase[i].substr(0,1).toUpperCase() + upCase[i].substr(1).toLowerCase();
this.rawValue = upCase.join(' ');

Thanks for the reply.
Found the following script in a forum, which works fine as a "custom validation script" in the.pdf version of my form. However, it will not work in LiveCycle? The problem seems to be with
"return str.replace(/[A-Za-z0-9\u00C0-\u00FF]+[^\s-]*/g"
function toTitleCase(str) {
var smallWords = /^(a|an|and|as|at|but|by|en|for|if|in|nor|of|on|or|per|the|to|vs?\.?|via)$/i;
return str.replace(/[A-Za-z0-9\u00C0-\u00FF]+[^\s-]*/g, function(match, index, title){
if (index > 0 && index + match.length !== title.length &&
match.search(smallWords) > -1 && title.charAt(index - 2) !== ":" &&
(title.charAt(index + match.length) !== '-' || title.charAt(index - 1) === '-') &&
title.charAt(index - 1).search(/[^\s-]/) < 0) {
return match.toLowerCase();
if (match.substr(1).search(/[A-Z]|\../) > -1) {
return match;
return match.charAt(0).toUpperCase() + match.substr(1);
event.value = toTitleCase(event.value);

HT204347 Thanks, the write-up was informative, But it do not answer for my question, that is where to look for serial # on my Macbook Pro Mid 2010 White Unibody Core 2 Duo 2.4 GHz 13.3"? Its not on bottom-case and the above article does not mention this m

Thanks, the write-up was informative, But it do not answer for my question, that is where to look for serial # on my Macbook Pro Mid 2010 White Unibody Core 2 Duo 2.4 GHz 13.3"? Its not on bottom-case and the above article does not mention this model?

Click on the Apple and then on about this Mac. In the new window, click on the "version 10.9.2" until you see the serial number displayed.

Im looking for a sleeve/case for my MBA

Similar Messages

Maybe you are looking for