Im looking for the cheapest and smallest transport control surface to use with logic 9(and X when i upgrade my lappy). usb.

Ive seen the presonus faderport but there looks to be lots of problems? is this still the case or has it been fixed?
Or have you any info on godens...if there even is?
cheers.x

If I could make a suggestion. I too have the Axiom49 and love it. I would not get rid of it. But for control of Logic, I use the Presonus FaderPort. It works flawlessly. Plug it into a USB port, add the Mackie HUI controller in the preferences, set the input and output (of that control surface) to the FaderPort, and your done. Motorized fader, limitless pan knob, etc. You may want to look into this little gem. It will be less expensive than a new MIDI controller, that's for sure.
Peter

Similar Messages

I am looking for the cheapest way to sample simultaneously 4 or more channels at 2Ms/s (ore more).

it's very important for my application both sample simultaneously and rapidly (more than 2 MHz).
I know that I can use a digital oscilloscope but it's limitate to 2 channels and to much expensive.
I'am looking for a smart and cheapest way to perform my application, if it's possible.

Timmy,
Your best solution is to use a PCI-6110 simultaneous sampling board which can sample each channel at a rate up to 5 MS/s.
If you are using the PXI platform, you can use the PXI-6115 which can sample each channel up to 10 MS/s simultaneously.
Both of these boards can be found in the National Instruments catalog available online at www.ni.com

Looking for the burn and smudge tools in photoshop 8.0

Hi, I have been using Photoshop 4.0 and loved it. Got a new computer and had to change to Photoshop 8.0. I can't seem to find the burn or smudge tools I used in the 4.0 photoshop. Is any one familiar with this problem?

Assuming you mean Photoshop Elements 8.0, then they are located under the Sponge and Blur tools, respectively.
Burn Tool:
Smudge Tool:

Looking for a third party go to EQ plug to work with Logic.

Hey folks, here's the deal: I'm looking for a great sounding, versatile, linear phase EQ. This will be used on a track by track basis, so low CPU overhead would be a plus, but I am running this on a dual 2.8 GHz eight core Mac Pro with currently 6 GB's of RAM, later to be expanded, so sound quality is more important to me than anything else. Cheaper, of course, is better, but I don't really want to miss out on quality to save a buck either. I already own two UAD-1 cards, and bought the Precision EQ, and while I like it, it's really mainly for mastering and not for finely tuned mixing work. I also own the DDMF EQ's, and enjoy them. I also own T-Racks 3, and use the linear phase EQ's with that, still, I am looking for something else for some reason. I am mainly using Logic Pro 8, and the linear phase EQ with it as my go-to channel EQ at the moment, but I also own Ableton Live 5, Digital Performer 5.13, and Pro Tools M-Powered 8, so I have access to the EQ's in those. But Pro Tools is only just for getting projects and audio out of Pro Tools, I can't use it well with the rest of my system, so that's that. Ableton is great, but not really what I use anymore, although I wish I had more time to get down with it.
Anyway, here is what I'm mainly considering, although I could go with any other idea at this point, so please make any suggestion you feel fit.
1) Ozone 4. (http://www.izotope.com/products/audio/ozone/)
I like the company a lot, and it's going to be inexpensive for me due to a student discount. I probably will buy it sooner or later, my thoughts are though that it largely duplicates what I already have with T-Racks 3, and I can't see using it necessarily as a channel EQ for some reason, although I probably could. I don't know how it sounds really either, I imagine pretty good, though.
2) Nugen Audio SEQ 2 Master Edition (http://www.nugenaudio.com/seq2.php)
Again, not expensive. I do really like the 10 Hz-30kHz possibilites with this guy. I own their Visualizer and other plug ins and enjoy them. I've downloaded the demo and liked that too, but you can't really measure how much you like the sound in a week or whatever. I mainly didn't hear any sound, which is probably good. The interface is less than beautiful, but then again, I'm not buying art here.
3) RNDigital Unique-lizer. (http://www.rndigitallabs.com/Plug-ins/U ... lizer.html)
I have their D4 compressor and absolutely love it. I have demoed their Inspector XL and loved that. I think they've got some killer plug ins going, and again, will probably get this sooner or later, likely as part of a package with the Inspector XL and the other EQ (the FirEQ), and a limiter or something. I really like the visual aspect of this plug, it would probably be helpful in isolating a troubling frequency in a snare hit, say.
4) The UAD Cambridge EQ. (http://www.uaudio.com/products/software ... index.html)
By now you are noticing that I want a more graphically styled modern EQ, and not a vintage emulating plug in. I intend to add some of those at some point (I guess I have some already with T-Racks and whatnot) but for now I want a super clean and versatile modern plug in style EQ that I would feel comfortable using on every track for it's uncolored sound. This is probably my least consideration, I think I would get much more processing power out of my native processing rather than my two UAD-1 cards, frankly, especially if Snow Leopard performs as promised. I am thinking the UAD-1 cards will turn out to be more of a processing liability more than anything else, I'm new to them though, but that's what it's looking like to me. I am unlikely to want to go to UAD-2 at the moment either, and am suspicious of the limitations of it's processing power vs. native as well. And this seems like an older offering of UAD's, and seems to want to be a "classic" console style EQ as well as the more neutral style version I am looking for... but then again, I don't know much about it compared to most.
That's the big ones- I have looked into URS, which seems like more vintage emulating stuff to me, as well as Sonalksis, which seems good. Waves is always there. TC Powercore and the Liquid Mix are possible (well TC Powercore unlikely, that's big time money) but I am sort of unwilling to add another Firewire bus PCIe card and am using a Firewire interface.
If anyone is still awake after this, I'd love to hear your thoughts! I'll be posting this on a few forums so let me know what you think please, thanks, L

For what it is worth, I am a fan of NuGen, I have both SEQ 1 and 2 and two stereo enhancing tools (stereoizer and stereoplacer I think they're called). Since I have the SEQ 1 it replaces all Channel EQ's. And the stereotools sound great and very lush, in stead of the more usual cheezy combfilterthingies that pass for stereo enhancing tools.
And I actually like the interfaces. Simple, but stylish, functional and ergonomic (in this case meaning you can see all parameters in a quick glance, no guessing at settings).

Does not play correct ringtones that are set for the Caller and Rings when no one is calling

I have had my Droid Global for around and three months and from the beginning I have had issues with the ringtones ringing when a certain person calls me. Instead, it seems, it will play the rigntone that is applied to the last person that called me instead of the person who is actually calling me. This can be somewhat frustrating and kind of defeats the purpose of applying rigntones to people in the first place.
Also, just recently my phone has decided to ring all by itself...without any incoming calls, notifications...nothing. It does a very quiet ring that sounds similar to that of a house telephone or landline phone. It does not stop unless someone calls me or if I take my battery out and reset my whole phone. My phone has only done this twice and unfortunately it once happened in one of my college classes and I couldn't get it to stop.
Please help me...I don't know what I can do to fix this!!!

Hi Cargo23,
I am sorry to hear you're having issues with your phone not ringing. In what zip code were you located when this issue occurred? Are you using your vehicle's bluetooth when this happens? Please try a soft reset to refresh your connections http://vz.to/1nLXk5g.
Thank you!
EdW_VZW
Follow us on twitter @VZWSupport

Transport control program tp ended with error code 0211

Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
Harry

Dear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry...

Transport control program tp ended with error code 0247

Hi,
Our landscape is such that any transport request once released, gets imported to Q system immediately. However there is another system (another box REG - regression testing) to which I would like to import a request but the transport queue of REG system does not show the request. So I tried to explicitly add it to the queue but I get the following error message, 'Transport control program tp ended with error code 0247.
There doesn't seem to be a problem with data & CO files as the same request is in Q system and the changes are all transported successfully.
This request is a transport of copy that contains some ABAP code. (changes to the relevant package can be saved only in local requests therefore transport of copy is recommended to transport the changes).
The changes appear correctly in Q system but for REG system the request neither appears in the queue nor be added to it.
Can someone advise where the problem is.
Cheers,
KC

Hi
When the REG system is not in the system landscape, probably you may not have Data & Co files in that system & you need to have those files separately in the REG system path & then import it.
Do consult Basis team on this issue.
Thanks,
Murali.

Transport Controll Program tp ended with error code 0012

we have 3 instances 1 DEV 2 TEST 3 PROD.
in TCODE:STMS by clicking 'system overview' icon
all systems are showing and domain controller is PROD,
and <u>Test System also defined as Transport Domain Cotroller.</u>
earlier STMS scenario: Transport Route is from DEV to PROD system not to the TEST system.
what I have done:
deleted the Transpor Domain Controller of the TEST system and kept as test system.
create routes from DEV to TEST to PROD.
present STMS problem:
when I am sending Request from the DEV to TEST Request going smootly. but at TEST sytem while importing the Request it is giving the ERROR as "<b>Transport control program tp ended with error code 0012</b>"
please help out me....as soon as possible.

This is definitely the wrong forum for your post. Please repost properly.
Regards, Klaus

Transport control program tp ended with error code 0008

Hi !
I trying to realize an export of client like that :
Source Client                     400
Target System:                    ASI
Copy Type                         Client Export
Profile                           SAP_RECO
Status                            Ended with Errors
User                              ST01051
Start on                          17.06.2009 / 17:41:00
Last Entry on                     18.06.2009 / 00:20:40
Transport Requests
- Client-Specific                 ASIKT00028
- Texts                           ASIKX00028
The export ended with this error :
Transport control program tp ended with error code 0008
Error when exporting request ASIKT00028 00:20:39
Program ended with error or warning, return code: F
What happen ?
If somebody can help me to solve this problem ?
Regards,
Johan

hai johan ,
of the return code is 008 then it is error,
what have u transported to target just chekc the log an du might find the error ,
just click the expand button of the error and u will get the detials what errror occured
may be some objects might be inactive just chekc once
m.a

Transport control program tp ended with error code 0249

Hello guys,
I am facing an when importing transport. After I click import to the transport in STMS, before it runs, a message window is displayed immediately. This was working find until last week, any kind of transport is followed by the same error.
Transport control program tp ended with error code 0249
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT BWDK903312 BIW client200 U0 pf=
sapbiw1a\s
Return code: 0249
Error text: connect failed due to DbSL load lib failure
Has anyone faced this error while trying to import a transport? I have not found the same error in sdn (0249)
help will be appreciated.
thanks
DGF

Your are right, but which is the Basis forum?
Business Process Expert
Database & OS Platforms ABAP Development
Enterprise SOA Portal
Emerging Technologies
SAP Solutions
Business Intelligence
Scripting Languages
SAP Business One Industries
Community Discussions
SAP NetWeaver Application Server Integration and Certification Center (ICC)

Transport control program tp ended with error code 0016

Hello colleagues,
We are getting the following error when exporting system HRP to HRI:
Transport program TP started successfully for HRPKX00005 21:25:45
|   Transport control program tp ended with error code 0016
|   Error exporting request HRPKT00005 00:59:50
|   Program ended with error or warning, return code: F
|   Runtime (seconds)         :         13.876
|   End of processing: 00:59:50
Please could you kindly help us to solve the issue?
Thanks in advance.
Best regards
Edited by: Víctor Barahona Cimas on Nov 12, 2009 3:33 PM

ok thanks

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

When I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Im looking for the cheapest and smallest transport control surface to use with logic 9(and X when i upgrade my lappy). usb.

Similar Messages

Maybe you are looking for