Im missing a component. these number pop up -45019

im missing a component. these number pop up -45019

The general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure any 3rd party apps are Snow Leopard compatible.
Good luck in any case.

Similar Messages

Hpqdirec.exe has stopped working; "This program requires a missing Windows component"

Anytime I try to access the HP solution center I get a message pop-up. It is from Windows & says: "This program requires a missing Windows component. " "This program requires flash.ocx, which is no longer included in this version of Windows." How do i fix this????

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing issues with regards to one of the Windows component which is missing
We will surely assist you with this issue
Please click on the below shown link to find the steps involved in resolving the issue
http://tinyurl.com/khb65xv
You can Check your warranty Here to verify the status if required
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

I cannot see the Vidoe displayed on the screen, only hear the sound. I am missing a component? Compressor, etc. I just downloaded the latest version of Quicktime for Microsoft, please help.

I am not able to view my video taken with a memory card only the sound? I am missing a component? Compressor, etc. I just downloaded the latest version of Quicktime for Microsoft, please help
I can see it on Windows Media? Need help on this.

It says SEDG 720X480 2:1 Mono. Video came from Sd memory card taken with a Samsung Video Camera.
Strangely enough, as a FourCC, SEDG is defined as "MPEG-4 hardware and software codec used in Samsung digital video products." Not a Windows or Samsung camcorder user but THIS WEB PAGE may be of some assistance.
Also I will need to view a CD recorded by the same camera (DVD-RW) file extensions are VIDEO_RM.BUP
VIDEO_TS.IFO, VIDEO_TS.VOB, SAMSUNG.IFO So far these files don't open even with Windows Media.
I don't know what to do to be able to open up these files save them on my Hard drive and then be able to upload them to YouTube. Any Ideas?
IFO files tell how the video content is segmented and where the video data is located. BUP files contain back-up IFO information. VOB files contain actual multipled audio/video data. A DVD formatted to play in a commercial DVD player normally contains a series of files named "VTS##_#.VOB" where ## refers to the "title" series and "_#" (where # is not a zero) refers to the order in which the video title file data is played.
Again, I am neither a Windows user nor an athority on Samsung VIDEO_RM folder structures. However, if your disc contains both a VIDEO_RM and VIDEO_TS folder, then I would normally assume the VIDEO_RM folder is present for legacy purposes and/or to provide information about the refording device while the VIDEO_TS folder actually contains the video object (VOB) file data. In any case, as I am not familiar with what software is available for muxed MPEG-2/AC3 editing/conversion on a Windows platform, I would try viewing the VOB files in an application like MPEG Streamclip (free). If you can play the Audio and video content (be sure to read the MPEG Streamclip requirements regarding codec installation), then you can edit (merge and/or trim) the raw data and convert it to a format compatible for YouTube uploading. (I.e., MPEG Streamclip is commonly used on the Mac for this type of work flow and the app is also available for Windows use.)

SDK is missing GPL component

I am using Flash Builder 4.7 and today I upgraded to the AIR 3.6 SDK which I got from here:
http://www.adobe.com/devnet/air/air-sdk-download.html
And then replaced the existing AIR 3.5 SDK by following the instructions here:
http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder. html
My application (which is almost complete) runs fine in the AIR simulator but when I try to run it in debug mode on my iPhone I get this error:
Error occurred while packaging the application:
SDK is missing GPL component /Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib/ aot/bin/as/as-arm
What am I missing? I have worked hard core on this app over the last couple months and have installed and ran it many many times.
- Randy

I solved my own issue and it was caused by the confusing instructions here:
http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html
Firstly the link says overlay yet the instructions are for "update" which is consistent with the instructions because no overlay occurs. The user is instructed to delete all the contents in AIRSDK directory and run a command line that unpacks the new files in place. Then there are instructions to copy the contents of the AOT from the old folder over. This was where I made my mistake. I simply replaced this directory which replaced the contents and suddenly some key files were missing.
To fix this, I reinstalled the old AIRSDK directory and ran the command line which OVERLAID the new SDK files over the old ones which replaces the necessary files with upgraded ones and leaves the rest intact. Now my project compiles without error.
Adobe, this is a problem. I realize that "overlaying" in this manner is not clean and can leave garbage behind, but your instructions on this page are problematic. Can you please devise a cleaner, easier and less problematic way of updating the SDK that does not require the command line?
- Randy

Ora-02084 : database name is missing a component

hai all,
i am a newbee to oracle. i am struggling to create a database, any help would be highly appreciated. i have installed Oracle 9i on a RH8.0 system. but while creating database through DBCA, i am getting the error message, "ORA -02084:Oracle database name is missing a component". i ahve gone through the documentation and found that probelm is with ORACLE_SID. i have set all the environment variables(including ORACLE_SID, DB_NAME AND DB_DOMAIN) according to the documentaion and created swap files, temporary space etc.i have set all the environment variables in .bash_profile in ORACLE_HOME.
i have stopped DBCA and gone through the files. i could see that the database is actually created, with initXXX.ora.441414312 file. but once when i started the database with nomount and checked, i could find the control files missing.
thanks in advance,
ramesh.

Probably you are missing value for db_name (or missing parameter db_name) in parameter file.
Note you can still create db manualy (without DBCA).

ORA-02084: datbase name is missing a component

Hello,
I am attemtping to configure OMS using EMCA on Windows XP. I get the following errors:
ORA-02084: datbase name is missing a component
Creating local database with SID "OEMREP"...
C:\oracle\ora92\bin\launch.exe C:\oracle\ora92\assistants\dbca dbca.cl -progress_only -emca_internal -createDatabase -templateName Transaction_Processing.dbc -gdbName OEMREP.hsd1.va.comcast.net. -sid OEMREP
Failed to create local database.Processing failed.
Question is what component is the database missing and how do I resolve it?
Thanks.

Try this one:
CREATE DATABASE LINK "SYNO.DELTEMIPPM.HUTCH.IN" connect to
STRMADMIN identified by STRMADMIN using 'SYNO.DELTEMIPPM.HUTCH.IN';
and then check whether the delink is working by the below mentioned command:
select * from tab@"SYNO.DELTEMIPPM.HUTCH.IN";
Regards,
Abhirup.
Kolkata, India.

Database name is missing a component....

I'm doing a 3 server install on Windows 2000 Professional.
While installing the infrastructure, while it tries to create the database I get the warning "database name is missing a component". I'm never asked to enter a database name, so I'm not sure where I'm going wrong.
The infrastructure hostname is "in", it's in workgroup "workgroup", and the fully qualified hostname is "in.sdia.com". It's IP address is 192.168.45.10. In the hosts file I added the following line after the default localhost entry:
192.168.45.10 in.sdia.com in
In the infrastructure install my instance name is "instance1".
I can finish the infrastructure install (and it reports it as successful), but I then get the same error doing the information store install, after which it fails on the database creation.
Any ideas?

How do you double quote the db name in a single box installation on Windows ? In a single box inst, you do not get the chance to specify the name that is causing the trouble, namely iasd.domainname.in.something. On windows, I tried manually running the same command that, according to logs, was failing, but could not get this to work. I tried all alternatives I could think of (-gdbname iasdb.aaa.in.xxxx.fi / "iasdb.aaa.in.xxxx.fi" / 'iasdb.aaa.in.xxxx.fi' / ""iasdb.aaa.in.xxxx.fi"" / '"iasdb.aaa.in.xxxx.fi"' / "'iasdb.aaa.in.xxxx.fi'") but none of them works. Some quickly spit out an error about an error in the name, while some fail only later with ORA-02084. What should I do ?

IOS Simulator build: SDK is missing GPL component X:\sdk_path\lib\aot/bin/as/as-386.exe

Trying to build a simulator build with air 16 or 17 and iPhoneSimulator8.2.sdk I get the following error:
SDK is missing GPL component X:\sdk_path\lib\aot/bin/as/as-386.exe
igmake: *** [../bin/project.ipa] Error 16
igmake: Leaving directory `X:/project/'
I've checked various sdk versions. Some of them have an "as-386" file, but never a "as-386.exe" file. I tried just renaming the file (hoping for the best) but that results in this error:
ld: in `)Ωtm♣Z, unsupported address encoding (08) of personality function in CIE
for architecture i386
Compilation failed while executing : ld64
igmake: *** [../bin/project.ipa] Error 12
Any help would be appreciated!
Ken

Thanks,
Yes I know that.
But what I was expecting was that things which worked in AIR 3.3 beta 3 would continue to work. As in this link http://blogs.adobe.com/airodynamics/2012/05/18/using-platformsdk-for-ios-on-windows/
In fact the Release notes that you point to state:
Platform SDK support for iOS on Windows
Now, a developer can copy the iOS SDK folder on a Windows® machine and use the platformsdk option of adt on Windows® too.
adt –package –target (ipa-app-store|ipa-ad-hoc|ipa-debug|ipa-debug-interpreter|ipa-test|ipa-test-interpreter) -platformsdk
This feature is not yet available in Flash Builder. The SDK should be copied properly, i.e. the symbolic links in the iOS SDK should be converted to actual files on Windows® , else, packaging will fail.
C

How to replace #Missing for a 0 number and not '0

Hello, I will like to know if any of you know how to replace in Excel the #Missing for a 0 (number 0), and not '0 (text 0), that is what it always return.
Thanks

Great Tim!!
Though i did not raise this question, i have been having this in mind for months from now.
This worked like a magic.
Yes you are right, it is not advisable when the sheet is meant for lock and send as it would create unwanted blocks.
Thanks for your help.
With Regards,
Rajkumar

When reopen Premier Pro CC, get message "missing media for these clips". I haven't moved files or anything. Please help.

When reopen a project in Premier Pro, I get the error message "missing media for these clips" and a listing of every file in the project.
When try to view, just get thumbnails with question marks.
What am I doing wrong?
Thanks

Is the media on an external drive?

Maintain serial number pop up in MB31 in ECC6.0

Hi,
I have a finished material with serial number profile assigned in work scheduling view where business transaction MMSL( Serial number in goods reciept and issue) is defined as optional(2) in customizing.
We are migrating from 4.6 to Ecc6.0.
In 4.6 with the same master data and customizing setting , MB31 throw Maintains erial number pop up while the same does not apper in ECC6.0
The pop up is appering if serial number profile is changed to Mandatory (3) for MMSL business transaction
Is this the standard changed functionality in upgarde?
Your commnets are highly appreciated..
Edited by: santosh sarda on Nov 8, 2010 6:44 PM

Hi,
thanks for the resonse. we found out the root cause was in customer exit were implimenated but they were inactive in upgraded environment.
EXIT_SAPLIPW1_999
EXIT_SAPMM07M_999

Hi I have got a problem where when I'm on safari i get these virus pop ups asking me to down load this and that and i don't know how to make them stop.

Hi I have got a problem where when I'm on safari i get these virus pop ups asking me to down load this and that and i don't know how to make them stop.

Click here and run Adware Medic.
(113236)

HT2404 when accessing itunes get message saying i am missing a component and cannot buy frim store because of this. what does this mean please.

when accessing itunes message comes up saying i am missing a component. cannot download anything from itunes store cos same message comes up. what is this and can i rectify it. thank you.

What version of Mac OS X do you use, and what version is iTunes?

I have had Firefox for years and in the last 2 weeks, I am getting all of these stupid Pop ups about credit reports and some Epic Play thing. How can I make sure I do not get them and why all of a sudden?

I have had Firefox for years and in the last 2 weeks, I am getting all of these stupid Pop ups about credit reports and some Epic Play thing. How can I make sure I do not get them and why all of a sudden?

Identify and remove adware/malware
http://www.thesafemac.com/arg/

Picked serial number pop-up window when confirming transfer order

Hi :
I used to be able to see picked serial number pop-up window when I was confirming the transfer order via lt12, but now it doesn't come after system refresh, is there any setting to trigger it?

Hi Allen
Can you tell me how you were able to close this issue. Thank you.

Im missing a component. these number pop up -45019

Similar Messages

Maybe you are looking for