Im not able to find bootcamp option in startup disk

im not able to find bootcamp option in startup disk.
my mac keyboard is also not working so i cannot use the option key during the restart.

What events led to this state?

Similar Messages

Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

You can hide them via your computer's iTunes : iTunes Store: Hiding and unhiding purchases - Apple Support
The 'x' might not show on their top left corner (it might be invisible), but clicking where it should be should hide the app.

Not able to find the options in Visual Composer studio

I am having Visual Composer role in Portal.
While I entered in Visual Composer studio, I am not able to see any option :
Browse, Compose, Configure, Inspect, Find Data, Deploy at the right pane of the window.
Can anyone help.
Edited by: Maitrali Marik on Apr 22, 2009 6:43 PM

Hi,
have you installed the adobe svg viewer on your computer ?
if not, you have to do this, you can find it on :
www.adobe.com/svg/viewer/install/
Fabien.

Not able to find ...Create From Existing Service option in OSB 11g??

Hi,
Iam new to OSB....Iam doing a simple demo in wch i have a business service which calls a java web srvc...now when iam creating a proxy service to route the request to Business service..iam
not able to find the option Create From Existing Service option(proxy or business service ) option in the eclipse galileo ..can some one pllz help.??

I don't have osb/oepe running over here, but the option when you rightclick on the 'business service > oracle service bus > create proxy service from busiiness service' , is gone ?

Workflow : not able to find team working option in SWDD 4.7

Hi,
In ECC 6, the username of latesh aditional changes done to a workflow can be find out by option team working. I am not able to find the same option in 4.7.
Is it not available in 4.7? can somebody help here.
Thanks,

Hi,
Check sap Note 1838654.may be it will help you.
As you mentioned you are on BO 4.0 Patch 11 it is very low patch.More possibilities these are bugs and SAP identified and fixed in later patches.
Better to upgrade on latest service pack and see.
Regards,
Amit

Iam not able to find Header, Navigation and Structure options in. I am using Dreamweaver CS6

Iam not able to find Header, Navigation and Structure options in Insert Panel. I am using Dreamweaver CS6

I've updated and now the problem solved. Thank you very much Ben...

Not able to find final Item in configurator R 12

Hi Guru's
I have created Model class item as CAR, Option Class items as : Tyre and Brakes.
Then finished Items as Rubber Tyres, Mac Tyres and Normal Brakes, Disc Brakes respectively for Tyres, Brakes.
In the configurator screen not able to find Finished items (Rubber Tyres, Mac Tyres ,Normal Brakes, Disc Brakes)
I am going through om and then click on configure for assembling.
Please advice on this.
Regards
Sunny

Hi Sandeep,
Thanks for the information.
Yes, added the Disc Brake and Normal Brake to the Brakes-OC BOM.
In the Brakes-OC BOM, ensure that these items are listed as optional-
Yes, this is done checked optional under om tab.
Go to the master org ; open up the indented CAR BOM. Make sure the whole BOM shows up-Everything comes perfectly here.
However still have the same problem gives the below error message in configurator screen.(Note this is in Vision instance R12)
[Session Valid] The configuration currently is valid.
[Session Incomplete] Tyres is unsatisfied.
[Session Incomplete] Brakes is unsatisfied.
Regards
Sunny

Not able to find out invoice level for customer collection

Hi Experts,
We are not able to find out invoice level payment details for the collection
They are provided collection amount and reference no, but here problem is customer have more than 20 company codes and they cleared in multiple co.codes , also user not maintained any reference while clearing the invoice, so we only able to find out the collection amount but we dont know for which invoice it is cleared.
can any one help us,

The given link take to the window where CPU patch for all the quarter available.
The Critical Patch Updates released to date are listed in the following table.
Critical Patch Update Latest Version/Date
Critical Patch Update - October 2012 Rev 1, 16 October 2012
Critical Patch Update - July 2012 Rev 1, 17 July 2012
Critical Patch Update - April 2012 Rev 2, 19 July 2012
If I click on Critical Patch Update - October 2012 its takes to the window for selectin the database version (11.2.0.3). From there it goes to the Patch Set Update and Critical Patch Update October 2012 Availability Document [ID 1477727.1] which I had already checked.
There for the database products it shows the below option.
Table 9 Patch Availability for Oracle Database 11.2.0.3
+*<moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>*+
It doesnt have the sepreate CPU patch. The below CPU patch is for the OC4J. I had a check.
Thanks
SHIYAS M

FindClass() not able to find the class in the same path

Hi,
I have a c prototype which calls a java function which push a message in JMS. i'm using jdk1.6. i have set JavaVMInitArgs vm_args.version = JNI_VERSION_1_6 when i compile the c code as gcc -g -lgcj -I $JAVA_HOME/include -I $JAVA_HOME/include/linux CallJMS.c the JNI_CreateJavaVM(&jvm, (void*)&env, &vm_args)* returns JNI_ERR. After changing version to 1.4 JavaVMInitArgs vm_args.version = JNI_VERSION_1_4 finally it gives me an executable which calls the java function (how ever the required functionality is not got)
To get the required functionality i had to use jdk1.6 so i changed the version property to JNI_VERSION_1_6 and the compiling command as gcc -g CallJMS.c -I $JAVA_HOME/include -I $JAVA_HOME/include/linux -L $JAVA_HOME/jre/lib/i386/server -ljvm .This gave me an executable, but when i execute it is not able to find the java class file. I have kept both the java and c file in the same path and also set the CLASSPATH. Please help.

Hi jschell,
I got solution to this problem. As you said it is due to wrong CLASSPATH set .
Before:
JavaVMInitArgs vm_args;
JavaVMOption options[3];
options[0].optionString = "-Djava.class.path=.:/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes";
options[1].optionString="-Djava.library.path=.:/home/program/jdk1.6.0_23/jre/lib/i386/server";
options[2].optionString="-verbose:jni";
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 3;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
I was setting the CLASSPATH to the Path where my java class files were kept. When the JVM instance is created only this path (where my java class is residing) is identified and the JMS and other paths which was already set in the CLASSPATH environment variable is lost. Thus when i call the java class from the c program it is not able to find the dependent class files and it was aborting.
After:
Before setting the path where my class files are residing to CLASSPATH, get the path's in the CLASSPATH to a variable, append the path where my class files are kept to this variable and then set the CLASSPATH . Similarly do for the LD_LIBRARY_PATH. This works fine.
char cpathBuff[100000];
char ldpathBuff[4096];
JNIEnv *env;
JavaVMInitArgs vm_args;
JavaVMOption options[3];
cpath = (char*) getenv("CLASSPATH");
sprintf(cpathBuff,"%s%s:%s","-Djava.class.path=",cpath,"/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes");
options[0].optionString = cpathBuff;
ldpath = (char *)getenv("LD_LIBRARY_PATH");
sprintf(ldpathBuff,"%s%s:%s","-Djava.library.path=",ldpath,"/home/program/jdk1.6.0_23/jre/lib/i386/server");
options[1].optionString = ldpathBuff;
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 2;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
Thanks for your support Peter and JSchell.
Edited by: 844094 on Mar 15, 2011 2:37 AM

Not able to find Interactive View Mode for WEBI in BI LaunchPad Preferences (BI 4.1 SP04).

Hi
I am not able to find Interactive View Mode for WEBI in BI LaunchPad's Preferences. It used to be there for BOXI R3. Is this feature has been revoked by SAP in this new release. Please confirm and clarify. Thanks!!

Hi,
In BI 4.0, We don’t have the option of Interactive mode, the only modes for viewing WebI documents are as follows:
1) Web: it is similar to the Interactive mode in XI 3.1. It means that you will use the HTML interface in BI launch pad to create, edit and analyze documents.
2) Rich Internet Application: This is similar to the Java Report Panel in XI 3.1.
You are using the Java interface in BI launch pad to create, edit and analyze documents .
But this requires the download of a Java applet.
3) Desktop (Windows only): in this case you are using Web Intelligence Desktop to create and edit documents, a standalone interface that works outside the BI launch pad. But this requires an install on your local machine.
4) PDF: Same as in BO XI 3.1
All view modes except PDF, have "Reading" and "Design" mode.
When you view a WebI document, the default mode is "Reading".
When you modify a WebI document, the default mode is "Design".
The user should use the modify option or view > Design, if he wants to modify a report.

I am not able to find folder my photo stream, how can i restore it

hi ,
I am using 5s mobile of storage capacity 32gb , and currently using IOS 8.1 version. my problem is I am not able to find out my photo stream folder in photos after I start using I cloud photo library. if any one can help me out to restore that folder it will be great..
Akhil

You can't (only) de-authorise computers you no longer have access to.
Your only option is to de-authorise all your computers and then re-authorise those you wish to be authorised. You can do this by logging into your account settings in iTunes on your computer (Store > View My ID) and selecting the option to de-authorise all.
Please note however, you are only permitted to do this once in each 12 month period, therefore you would be better de-authorising your computers before you lose access to them. you can do this from the 'Store' menu in iTunes.

Hi, in my iphone4s i'm not able findings multi-media option in message settings

hi, in my iphone4s i'm not able findings multi-media option in message settings & camera icon in text messaging, please give me solution for this problem ?

Thanks for the reply.Sorry but, that is only my problem is when I goto settings< messaging<then there I find only 3 options( show preview, character count, play alert tone ) I find only these option with coressponding on/off button slider for them, & no where in settings I find 'mms messaging on' option, can u please suggest me now what to do?

TS1398 My phone is not able to find any wifi networks.

My phone is not able to find any wifi networks.
I have another i phone and it is connected just fine, my ipad and computers are conneted just fine.
I followed apples directions but still not working.
It stopped working around december 5th.

Thats odd unless its a Windows 9x system lol. You shouldn't need drivers for USB storage devices. They are designed to identify themselves as Mass Storage class devices which will run with the built in drivers after Windows 98. Occasionally you will get a device that have deliberately been designed to not meet the standards (for extra features) but you saying this happens with other USB devices says this isn't the case.
Does it only happen with storage devices? Like hard drives, flash drives etc?
The model and windows version shouldn't make much of a difference in this case but it doesn't hurt to know what kind of system you are using.
Look up the USB controller in your system, if there are drivers for that, download them. If it's an already Windows supported device there is no need to download anything for it (have your Windows disc handy if you use XP) then uninstall the USB controller from the Windows Device Manager using the option to remove the drivers as well if the option is there. Restart and let Windows find the USB controller and install it (and any other devices attached to the USB bus). You may find your keyboard, mouse and any other USB devices won't work until Windows has finished installing them. Just give it some time, Windows will get there.

I restored my iPad and then repurchased App Pages. But I am not able to find my data saved with Pages before the restore. qwn

I restored my iPad and then repurchased App Pages. But I am not able to find my data saved with Pages before the restore. qwn

Those sites take a long time to load for me (almost a minute)
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Not able to find data in Cube

Hi All,
Good Evening!
I am loading data from ODS to Cube. I am not able to find values for 0ORDER_CURR in the cube and also in the report which I built on the Cube. But they are present in the ODS.
Please help me to find the problem. Thanks in Advance...
With regards
Mahi

Hi Mahi..
Try to check is there mapping in ur Update rules for this 0ORDER_CURR.. if not then maintain the same..
Also let us know whether u have used this object at the cube level or not??? if not then try to maintain and then maintain the mapping as well from the DSO.....
this will solve the issue....
thanks..
Assign points if this helps...

Im not able to find bootcamp option in startup disk

Similar Messages

Maybe you are looking for