Im possible to switch on.

I switch on with the button at the top and only the white apple logo appears for a few minutes and disappears. No response from main button in front. I plug it in on mains and computer but no response. Not recognised in i-tunes also.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

Is it possible to switch from the preinstalled iTunesU to the original iTunes on an iPad. If it is can someone explain how to do it?

Is it possible to switch from the preinstalled iTunesU on my iPad to the original iTunes. If it is can someone tell me how, and is this something that commonly happens?

I'm not sure what you are asking. There is no "preinstalled iTunesU" on an iPad. The iTunes app is a portal to the iTunes Store. Use the icons at the bottom of the page to switch to different sections of the store. Use the Music app or the Videos app to access iTunes media you have synced to the iPad.
To learn more, refer to the iPad iOS5 User Guide

Is it possible to switch the rows and columns?

Is it possible to switch the rows and columns of a table? The reason I ask is that it would be easier for me to input the data with the number at the top of a column and the fields going down. But it would be easier to read the data with the number on the left and the fields going to the right. Is it possible to switch a table in this way?

mahongue wrote:
Is it possible to switch the rows and columns of a table? The reason I ask is
that it would be easier for me to input the data with the number at the top
of a column and the fields going down. But it would be easier to read the
data with the number on the left and the fields going to the right. Is it
possible to switch a table in this way?
It sounds to me as though you wish to transpose a table so that the original is changed from rows to columns and from columns to rows, as in the following:
Table 1
    A   B   C
========
1   o   p   q
2   r   s   t
3   u   v   w
Table 2
    A   B   C
========
1   o   r   u
2   p   s   v
3   q   t   w
You are right - it would be nice to have a menu item to magically transpose a selected block of cells. But there isn't one. So...
One way to solve this is to use the index() and transpose() functions to accomplish row and column cell transposition. If you are going to use a 1:1 cell correspondence and change the header columns and rows also, you can use this:
   =INDEX(TRANSPOSE(Table # :: <range>),ROW(),COLUMN())
where Table # and <range> is substituted as in the following fashion:
   =INDEX(TRANSPOSE(Table 1 :: $A$1:$C$3),ROW(),COLUMN())
Create a second table. Copy the modified formula above with the appropriate substitutions, select the range you wish to have your transposition inserted into (must match the transposed cell dimensions of the original range), paste the forumula and voila! the cells will be transposed.
Cautions:
o The target table must match the swapped cell length and width dimension. For example, if the original data range is 6 columns wide by 4 rows deep, then the corresponding table or range to hold the transposition must be 4 columns wide by 6 rows deep.
o If your transposed data block is to be offset from the origin of the new table, then you will need to include a subtractive offset into your cell formula, since in the transpose() function the data in the master data range is referenced from its position with the master range, not its cell position in the table. Such an offset is necessary because this example formula uses the target row and column numbers to arrive at indexed positions.
For example, if the new data range is to be offset one column to the right and one row below from the target table's origin then you must subtract (-1) from the cell and from the column references in the formula:
  Example:
  =INDEX(TRANSPOSE(Table 3 :: $B$2:$D$4),ROW()-1,COLUMN()-1)
If someone has a better solution I'd be glad to hear of it.

I want to buy the movie Crazy Stupid Love but it is not available in the US, only in the UK. I live in the US but is it possible to switch the itunes store so that I can buy that movie?

I want to buy the movie Crazy Stupid Love but it is not available in the US, only in the UK. I live in the US but is it possible to switch the itunes store so that I can buy that movie?

It used to be in the US iTunes Store as that's where I purchased it. Often the studios will temporarily pull a movie from the store during times the movie is scheduled to be shown on TV or cable TV as the TV network has been granted exclusive access during the period. It will return to the store later.

Is there a possibility to switch off in Firefox the functionality of quick launch key (additional key in laptop) that cause to run the homepage

Dear Support,
Is there a possibility to switch off in Firefox the functionality of quick launch key (additional key in laptop) that cause to run the homepage. I would like to switch this functionality off, because the key is malfunctioned and always pressed. I was able to switch off the functionality of this key in Windows system by deleting entries in registry Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey. After this change, when somebody works in system the Firefox is not running is not launching all the time. But when I open the Firefox the setting in system is overwritten and when I am using it Firefox returns to the homepage instantly. I think because of this quick launch button. I tried to change settings in about:config like browser.startup.homepage, browser.startup.homepage_override, startup.homepage_override_url,… this is for Firefox version is 10.0.2
Thank you
Best Regards

Hi,
Thank you for your interesst.
This internet button key is one of buttons located above the keyboard near the power button. What I have achieved to this moment was to stop it functionality in the system by clearing the entries in the fields Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17\ShellExecute and entry
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7\Association that was http
After these changes in registry the behavior of the button was suppressed, the Firefox stopped to start unexpectedly all the time – so in system it works. But the problem is still when I have opened Firefox. Every time when you want to surf in internet – the homepage is activated also unexpectedly. I wrote this post with intention to ask if there is a possibility to switch off the functionality of this quick launch button in Firefox. Because I assume Firefox overrides the system setup – this I have made in registry. I tried with some option changes in about:config but without success. And I know that for older versions of firefox was some option in about:config do disable_quick launch button. But in 10.0.2 I couldn't locate it.
Thank you
Regards
Lukasz

It's not possible to switch on my Iphone 4

It's not possible to switch on my Iphone 4 and also to charge it with two different cables. When I first uesed the phone its battery had 42%, so i don't know why it switcht itself off...
Can you help me?

Try a reset by pressing and holding the home and power buttons until the white Apple logo appears.

There is any possibility to switch FN and CTRL on Lenovo USB keyboaord?

Hi, im think about buying Lenovo usb keyboard, eg. http://www.ger-pol.nazwa.pl/pliki/zd/klawiatury/lenovo_lxh-ekb-10ya/2.jpg
and im woder if it is possible to switch FN and CTRL keys or map FN on CTRL or maybe turn off FN key - without physical removing FN ;-)
i know there is http://blog.lenovo.com/images/uploads/hero/Untitled-3.png, but its much more expensive... :/

contact middleton
he managed to make ctrl-fn patch for y550, maybe he can as the same for u330.

Is it possible to switch off auto dates in a comments box?

Hello,
I am making annotations to a document in pages 09 using the comments facility. However each time after saving when I return the date has automatically appeared in the comments box. This is becoming slightly annoying as I have a larger list of dates than the comments I'm making!
Is it possible to switch this feature off?
Thankyou in advance for any help.

Hi Jerrold,
That works fine until I save and then when I reopen the document the comment box has the date and time back at the top. If I save and reopen again the following day there will be two dates and times in the box!
I really just need to get rid of them totally.

In Creative Cloud, Is it possible to switch a downloaded app with an older version of the same app ?

I have the creative cloud, and downloaded Dreamweaver CC, but I prefer working on the version 5 or 6 ... Is it possible to switch ? "downgrade"? how do I do it ?
Thank you!

your cc subscription also includes cs6 apps, Download previous versions of Adobe Creative applications

Travel Expense: Error: Travel Exp already exist not possible to switch schema

Dear Team,
I am supporting Travel Management in one reputed company.
User facing one issue where TRF raised by copying one old TRF, during that time Travel expense report also getting copied. It is not giving any error while raising TRF in this process, but when the user trying to raise TER for the same he is geeing error: 'Travel Expenses already exist not possible to switch schema' Kindly suggest how can I stop this. Attached is the ESS Screen.
Regards,
Adi.

Hi Adi,
no. Leave that as it is. I wasn't entirely sure whether the field's value influences the TER in any way. But since it is = 1 and your TER schema collides, this is completely irrelevant. Still good to have this ruled out.
Have you checked what I wrote concerning FITVFELD_WEB? There's a checkbox in the schema "Overlapping Trips allowed" (loosely translated from German, might not be verbatim). If it's not checked, check it and retry.
Again though: 4 years ago, as I already stated in my earlier posts, these settings had no impact on the collision of Travel Expense Claims and coexisting TERs in the same time were not possible. I assume it is still not possible, so we're clutching at straws here.
However. If I understood your business needs correctly, you actually do not want the expense report data/indicators to be taken into account, because you just need the copy for the Travel Request, right? There might be chances for implicit enhancements and "killing" that bit information from the copied TE-Cluster entry so it doesn't stray into the copy of the Travel Request Copy anymore.
Cheers, Lukas

Is it possible to switch off the auto reverse function

Hi,
I just bought a new iPod Shuffle. Is it possible to switch of the auto reverse function e.g. that the iPod starts to play from the beginning again after the last song of a playlist is reached?
Thanks
Sascha

No...
Look in settings...general settings....about.. Will show you the iOS version for the iPad.

Is it possible to switch my internet? Please help

Right now I am using iCab Web Browser and its a shareware. It's very slow, and can't access some websites. I have OSX 9. Is it possible to switch to Internet Explorer or Windows? I really would like to switch and I am not a computer person whatsoever. Please help me.

There are other older choices from which to experiment, such as Classilla 9.2.1 browser,
which is newer than the much older WaMcom mozilla derivative...
These would all have some issues, and one of them is the lack of correct Java support
along with any Flash player or other important parts whose update has ceased to happen.
Classilla:
http://www.floodgap.com/software/classilla/releases/
Older browsers, such as very early (Mac OS) Mozilla and Netscape 7 or before may be OK
if you can find them as downloads; but each will be lacking in some important area. For those
who may hope to use the email function in some, that may not work. It may in another, if the
technical specs for email haven't changed too much, or if the Internet provider allows access.
http://code.google.com/p/classilla/wiki/AAATheFAQ
MRJ and Flash 7 are supported to some limited extent, from what I've read; but for issues
including security and performance, it is 'forced-off' and should only be turned on to see if
a web page supports it, or in known-secure web sites. Classillia should be read into further.
Some models of older computer hardware predating OS X 10.2 may require a Firmware
update version to be installed in the older OS9 software, running in the computer, to be
able to safely consider running 10.2 or later, in the computer. So if you consider that, do
look into available or necessary firmware updates and install one as needed. Then, to run
an OS X, the computer may require other hardware updates, more RAM, larger HDD, etc.
Or be on the look-out for a newer build Macintosh which supports later OS systems; you
can find info in MacTracker.ca or everymac.com on what hardware supports which OS.
PS: if your older 'colors' G3 iBook were a 'dual-USB' model (white, 500MHz+) it would be
able to run up to Panther 10.3.9 and OS 9.2.2, without additional firmware update; limited
by the size of the hard disk drive, graphic processor, limited RAM upgrade, bus speed, etc.
Good luck & happy computing!

Is it possible to switch my processor from one laptop to another

i have 2 laptops, both are toshiba's, my old laptop runs better than the one i got for christmas becuase of the processor, my new laptop runs slow becuase the processor is a single core with 1 GHz my old one is dual-core 2.00 GHz, i want to switch them, they are both AMD so i am wondering if it would be possible to switch them
Here are the processors specs:
Old one:
AMD Athlon(tm) X2 Dual-Core QL-62 2.00 GHz
New one:
AMD C-50 Processor 1.00 GHz
so please, is it possible to switch them, and how would i go about switching them if possible.
thanks,

It sounds like a good idea, but it is a total non-starter. Sure, both CPUs are from AMD, but they have different packaging, different voltages, different Level 2 cashe, different thermal outputs and the connectors are different too. All of the circuitry around the 1 Ghz CPU was designed to handle that speed of CPU. If it could be done, you'd overclock the existing circuitry and burn out the system board.
Unlike a desktop computer that you can put in a new system board, CPU and video board, a laptop is pretty limited on what can be done as an upgrade. Your best option would be to find a computer that has the CPU that you'd want and buy it.

Is it possible to switch between two BOM usages in the order?

Hello Experts,
We have created two maintenance BOM's say Structural BOM - Usage Plant maintenance & Spares BOM - Usage Spares for a technical object.When I am creating an order,in the components list I can only list the BOM with Usage plant maintenance.Is it possible to switch between the usages?I need both the usages for selecting materials in the components tab.
Thanks,
Ashraf

We are on ECC 6.0
Regards,
ashraf

[T500] Is it possible to switch GPUs withoout the PowerMgr tray app?

The tray app is not really a standard size.
This is what I'm talking about:
http://ieatcats.info/0/i/su/tray1.jpg
http://ieatcats.info/0/i/su/tray2.jpg
Is it possible to switch GPUs without the app?
(I have checked the contents of the C:\Program Files (x86)\ThinkPad\Utilities folder, but couldn't find anything useful.
Any ideas?)
Solved!
Go to Solution.

For 32-bit Windows:
"C:\Program Files\ThinkPad\Utilities\PWMUIAux.exe" /HighPerformanceGpu /ShowDialog
"C:\Program Files\ThinkPad\Utilities\PWMUIAux.exe" /EnergySavingGpu /ShowDialog
For 64-bit Windows:
"C:\Program Files (x86)\ThinkPad\Utilities\PWMUIAux.exe" /HighPerformanceGpu /ShowDialog
"C:\Program Files (x86)\ThinkPad\Utilities\PWMUIAux.exe" /EnergySavingGpu /ShowDialog
You still need Power Manager installed, as well as the switchable graphics driver package provided by Lenovo (not AMD/ATI or Intel).
By the way, Firefox Nightly is way faster than Pale Moon.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Is it possible to switch off all addons by default when starting firefox?

Firefox often runs quite slowly but resetting appears to solve the problem. I tried to identify any problmatic addon but was unsuccessful

'''''Is it possible to switch off all addons by default when starting firefox?'''''
Not really. You can start Firefox in the [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode?esab=a&s=Safe+Mode&r=1&as=s SafeMode], but you would need to restart Firefox to enable your addons.

Im possible to switch on.

Similar Messages

Maybe you are looking for