IM report to view expenses at IM position level?

Dear Experts,
What report in IM that would provide us an overview of actual spending of projects (multiple projects are assigned to IM positions) at IM postion level??
I know that that we can execute report in PS to see actual spending by projects. But i need to look at an overal spending by IM postion(to see all spending for projects assigned to each IM postion)
Please help.
Monica

HI Virendra,
Thanks for your response.  I tried  report in IM is S_ALR_87012805 and 2806, It only gives me the list of IM position without actual $$$$. Did i do anything wrong??
Also, If i try CN41, I would need to config a new PS info profile(OPTX) with db  profile 0000 ....5 (OPSM??)
I just need to understand more about the configuration in these 2 t-codes and how they are related??
Please enlight me...
Monica

Similar Messages

  • Re-order curves programmatically in REPORT or VIEW

    Is is possible to programatically re-order curves in REPORT or VIEW? 
    Thanks!
    Julia

    Hi Julia,
    One simple method that you can use is to change the channel associated with a particular curve number.  Below is a snippet of a sample script that shows the current names and positions of two curves on a graph in both the REPORT and VIEW panels.  You can programmatically set the each curve to be any channel you wish, and thus you can "swap" their order in whatever manner you would like.  Please let me know if this is what you are looking for.
    Cheers,
    Kelly R.
    Applications Engineer
    National Instruments

  • Report to view vendor payment status

    Dear GURUS
    Is there any Report to view vendor payment status  against purchase order.
    Please give me transaction code if any.
    SANTOSH KADAM

    check report
    FBL1N
    u will get the report u can creat ur own lay out also to satisfy u r need
    hope this helps

  • Report for viewing Sales order no against delivery date & actual GI date

    Hi Experts,
    Is there any report for viewing Sales order no against delivery date & *actual GI date*
    Because in VL06F , i can only able to get planned GI.
    Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
    Regards,
    Sujit S.

    dear Hrishi,
    i followed your suggestion, but couldn't get desired results,
    here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
    thanks for your valuable reply.
    @ G. Lakshmipathi ;-
    i think i will need to develop z-report for fetching the data from the tables
    VBAK (to get sale order reference) and
    LIKP (to get delivery and actual GI date)
    thanks for your reply,
    Regards,
    Sujit

  • Standard report to view Released SD credit locked orders or deliveries

    Hi Experts,
    Is there any standard report to view the sales order or deliveries which are released due to credit control
    system for a particular period?
    Thaks in advance
    SR

    Hi Ram,
    Info stru-      S066 
    Description-       Open orders: credit mgmt         
    Period unit- Month
    Update  -Synchronous updating(1)    
    S067----
      Info structure is not exist in our system.
    Regs.
    SR.

  • Report for viewing credit limit block released documents

    Hello All,
    Our client's requirement- credit limit check to be carried out and authorised persons can release the blocked orders.
    But is there any report at month end to see how many documents were released and who released them  Is there any standard report for viewing these or ABAP has to develop them?  VKM2 transaction- released SD Documents would not show any released documents once billing is done i.e, once the sales documents is released it cannot be known who released it and when, how to track this?. so what can be the solution for this? Please suggest
    Regards,
    RAJ

    Dear Raja,
    Use VKM4 t code.
    You can see both credit released sales orders and deliveries.
    Put Overall credit status as D.
    You can see how much value was released, when it was released. But with which user id it was released you cant see it.
    Regards
    Abhilash

  • A report to view the cash flow coming from Purchase Orders.

    Hi All,
    Could anyone suggest me a report to view the financial obligations which comes from Purchase Orders?
    Thanks
    Gandalf

    Hi,
    You will have to activate basic cash management (part of FSCM) and use TCode FF7B (liquidity forecast). What the report would do is, based on the delivery date of the purchase order and the payment terms of the vendor (plus some grace days for clearing the payment as per configuration) determine the date of expected payments and project the cash (and bank) balance by days/week or months.
    Alternatively you can write your own ABAP code which will do the same thing.
    a. Take a list of all open POs and determine the delivery date (EKKO and EKPO)
    b. Add the payment terms as per purchase order to the delivery date
    c. Compute the cost of the purchase order item
    d. Display the report which projects expected payments by date
    Rgds
    Shivram.

  • A report to view the cash flow from Purchase Orders.

    Hi All,
    Could anyone suggest me a report to view the cash flow (financial obligations) which comes from Purchase Orders?
    Thanks
    Gandalf

    Hi,
    You will have to activate basic cash management (part of FSCM) and use TCode FF7B (liquidity forecast). What the report would do is, based on the delivery date of the purchase order and the payment terms of the vendor (plus some grace days for clearing the payment as per configuration) determine the date of expected payments and project the cash (and bank) balance by days/week or months.
    Alternatively you can write your own ABAP code which will do the same thing.
    a. Take a list of all open POs and determine the delivery date (EKKO and EKPO)
    b. Add the payment terms as per purchase order to the delivery date
    c. Compute the cost of the purchase order item
    d. Display the report which projects expected payments by date
    Rgds
    Shivram.

  • SAP Standard report to view the asset balance- Based on the calender year

    Hi ALL
    Any sap standard programs are available to view the asset balance based on the calendar year not for the fiscal year. 
    Asset balance report S_ALR_87011964 will display based on the fiscal year in report date. For example I want to view the September month asset balance, Any standard report to view the calendar year wise output.
    Regards
    K.Gunasekar

    Dear Gunasekar,
    in Asset balance report S_ALR_87011964 you can view also a calendar year, you can enter every Reporting date in the progrm.
    In RABEWG_ALV01 you can enter also a Capitalization date "from to". I think this is what you want.
    regars Bernhard

  • Error Crystal report When viewed through SAP B1

    Dear Experts
    SAP B1 8.8 PL 16,SQL 2008
    I am facing error (Unable to retrive data from database)(Vendor code-156) while accessing Crystal report from client machine throgh SAP B1.I have imported Crystal report through manage layout.The crystal reported is in shared in SAP server B1 SHR folder.I am able to access data from crystal report when viewed otherwise.When accessed crsytal report through SAP b1 on SAP Server crystal report is working fine.
    Thanks & Regrds
    Saurabh Lamba

    Hi Saurabh Lamba,
    Go To Administration / System Initialisation / Authorisation / General Authorisation & Set Authorisation for user.
    If you have to Set Authorisation for user allready then follow this steps.
    1.Restore Database as Test Company.
    2.Export Report From Live Company.
    3.Import this Report in Test Company as different name.
    4.Export Report from Test Company have you Imported as deifferent name.
    5.Again Import this Report in Live company as different name
    I don't know what's the logic behind it.
    Thanks,
    Srujal Patel

  • Is there any report to view" the blocked Vendor Invoices along with the Pay

    Dear Gurus,
    Is there any report to view" the blocked Vendor Invoices along with the Payment Date". Please Let me know.
    Balaji

    I think you can solve this issue with a Query.
    Fernando.

  • Report to view commitments on a vendor

    hi Guru
    Please tell me if on the MM side if there exists a report to view commitments on a vendor
    Best Regards

    hi,
    Expediting Report [by Vendor] [PSv8.9]       
    Expediting Report [by Vendor] (POY4007)
    Introduction
    Purpose of the Report
    The report displays a detail listing of outstanding Purchase Orders (PO) sorted by vendor. PO details include due date, late days, vendor ID/name and ship to ID. The run control page allows the user to specify a date range, vendor Set ID, vendor ID, buyer and agency PO Business Unit.
    Three reports can be produced from the same run control page: Expediting Report by Buyer (POY4006), Expediting Report by Vendor (POY4007), and Expediting Report by Due Date (POY4008).
    This report is used to determine which POs may require expediting.
    Type of Report
    Crystal
    Legacy SAAAS/CAS Reports
    Option 15 Purchasing Reports, Option 16 Accounts Payable Reports
    CAS ACRE 58 Active Commitments u2013 Detail, ACRE 59 Commitment Analysis - Summary
    Role(s) Needed for Access the Reports
    Purchasing Module Report Maker
    Navigation Path to the Report
    Purchasing > Purchase Orders > Reports > Expediting
    Suggested Run Times
    Ad hoc
    Report Request Parameters
    General Notes:
    Select an existing Run Control ID or enter a new one
    For reports that are run on a regular basis, user should select a Run Control ID naming convention that can be easily identified (e.g. PO_Expediting_Vendor)
    An asterisk * preceding the field name indicates input is required
    Go to tips and tricks for additional help in entering Run Control IDs and report parameters
    Report Request Parameters                                                          see screenshots below
    In This Field      Enter      Notes
    From Date:      type date or use the lookup to select      
              o to display one day  - enter same date in both fields
              o to display a date range u2013 enter beginning and end date
              o to display year to date u2013 enter 07/01/YYYY and current date
    Through Date:      type date or use the lookup to select
    Vendor Set ID      Type STATE or use the lookup to select      Use STATE for most purchasing reports
    Vendor ID:      type vendor ID or use the lookup to select      leave blank to display all vendor IDs for selected report parameters
    specify vendor ID to display data for one vendor ID
    Buyer      type buyer or use the lookup to select      leave blank to display all buyers for selected report parameters
    specify buyer to display data for one buyer
    Business Unit      type agency PO Business Unit or use the lookup to select      user must enter agency PO Business Unit. For example, enter DOCM1 for Department of Correction
        Save      push the save button to  save report parameters      save reports that you want to run on a regular basis
    Run
    push the run control button      on the Process Scheduler Request page:
    select server (PSNT or PSUNIX) from the dropdown menu or leave blank
    select one, two, or all three reports (by buyer, by vendor, by due date)
    format u2013 change format to PDF; XLS (MS Excel format) is also available
    push the OK button
    Report Request Parameters (continued)                                    see screenshots below
    In This Field      Enter      Notes
        Process Monitor      
    click the Process Monitor link on the Report Request Parameters page      on the Process List tab
    view the processing status of the report
    click the refresh button until the Run Status is u201CSuccessu201D and the Distribution Status is u201CPostedu201D
    click the details link
    on the Process Detail page:
    click the view log/trace link
    on the View Log/Trace page:
    click the report name.PDF link to view the report
    Example of Report Output
    Example of rows generated for an Expediting Report by Vendor (POY4007) (Crystal format) with the suggested parameters.
    Rewards welcome
    Thanks & Regards
    SwathiSri

  • Report to view Manufacturing variances - Purchase Price Variance

    Report to view Manufacturing variances - Purchase Price Variance, Materials Usage variance, Labor Usage variance.
      for above reports if standard tcodes are available in SAP please provide them or else explain how to develop these reports in SAP
    Spandana

    Hi
    You can use KKO0 reports...
    For that, assign your Cost Comp Str in OKN0 and choose Product Group = material group.. This is one time config
    Execute KKRV monthly after all period end setttlements are over... Then you can view KKO0 reports
    br, Ajay M

  • Report to view- Inventory Balance

    Client is asking for a report to view- Inventory Balance - current date data by raw materials, WIP, finish good, semi-finish good. By Internal order,Production order, Service order wise. Can you please help.
    Spandana

    You could use several standard report MC.5,MC.2,MB5L (by GL).
    You cannot get inventory by IO or CCtr, Prod Order. To get this data  you need to run CCtr,IO reports with your consumption GL accounts.
    Production order balance report S_ALR_87013127 or S_ALR_87012993 will give balances. Make sure you give material consumption GL accounts

  • Report to view user nm, authorization objects, activity, transaction code.

    Hi All,
    I want to view a user-wise report that displays the transaction code, authorization objects and activities for which the user has authorization.
    Is there any standard report to view all this at a glance?
    Can anybody help me on this?
    Thanks.

    u can try SUIM tcode
    its really helps u
    regards,
    Abhilash

Maybe you are looking for

  • DTP-extraction-tab:Check-box 'use aggregates' what does it mean?

    Hello BW experts Can someone explain in simple words, what das it mean the check box  'use aggregates'  in the data transfer process (Tab extraction). The F1-help gives the following explanation  -however I don't understand the info-: 'Should aggrega

  • I am passing my itab data to variable declared in global declaration.

    Dear All,               I am passing my itab data to variable declared in global declaration, i am getting column one data in all eight variables declared. but column two data having 8*10=80 data i.s. for 1 entry of column there is 10 entries of colu

  • Please, help. I have a simpple problem with selects and appends

    Hi experts, I want to append the data from pi_temp to pi_inter in every LOOP. What I have to do? Thanks a lot !!!! thank u! CODE: FORM get_interconsultes_data  TABLES pi_inter STRUCTURE zbw_interconsultes. DATA: pi_temp LIKE TABLE OF zbw_interconsult

  • Cannot set up BBM a temporary BBM server error has occurred

    hello admin, after the update in my mobile to version 7 bbm this is the error i get to my B9780. please help me how to rectified this error...i read some furom to delete from mobile and reinstalled again but same error pop up..looking forward your pr

  • Launch programs from file.jsp ?

    i am working about a web application in jsp and i must submit an input, for example pasted by the user in the html form,as an input for others programs which are not written in java but in c or perl. have you ever done something like that ? are there